Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: feature
New callback vnet_hw_interface_add_del_mac_address().
Add or delete secondary MAC addresses on a hardware interface.
This will allow packets to be processed which have a destination
MAC address other than the primary programmed MAC address without
needing to put the device into promiscuous mode.
Change-Id: I6beecbcb8932fc1fe45b567f76fa3706feefae2c
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
The function vl_socket_read_ready did contain some comments already,
but as they stated, the logic has to be tricky to cover multiple cases.
Comment:
+ Add function-level comment
+ Add comments to describe some of local variables
+ Add many comments to describe internal state at particular lines.
Simplify:
+ Remov mbp_set as it is never needed.
+ Replace msg_len with msgbuf_len to save "+ sizeof (msgbuf_t)".
Improve:
+ Early exit on EAGAIN.
Fix:
+ "n" now only tracks input_buffer.
Previously, it was entering the detection of additional messages
even for unprocessed_input.
+ Set up msg_buffer (including appending to unprocessed_input)
outside full-message-detection loop now,
so it cannot be executed multiple times as before.
Type: fix
Ticket: VPP-1785
Change-Id: I256e34b435be06844458744a13ea37a0e86a96f9
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Previously, self.transport.q got the messages
(at least for socket transport), stored in the encoded (packed) form.
In order to avoid accessing internals for async reads,
a new method is introduced, to perform
blocking reads of decoded (unpacked) messages.
The method is also used in _call_vpp(),
so sync and async reads are kept compatible.
Type: feature
Change-Id: Id49792dfa57c00b1a14a198031c5398d09a9ba20
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Type: fix
Signed-off-by: Rajesh Goel <rajegoel@cisco.com>
Change-Id: Ie4372c5cf58ab215cdec5ce56f8a994daaba2844
|
|
Note: The VAT _test.c plugins need some more adjustments.
Type: refactor
Change-Id: Ifa150683d7d68db7950f66ef85eea73c8281ba14
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: If75f63244f37ae3312832ca015f738c51ee7da1f
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
otherwise they get installed twice and the reference counting means they are not removed.
This is the same behaviour as IPv4.
Type: fix
Change-Id: I9266e04ccff6ff06a577e85973a2ddbeb9dfc52b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
they can use the 'auto' adj for all traffic
Type: fix
Change-Id: Id2b9557683252a94badc8f9dfab5f7b2ae26f1ee
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: refactor
This patch does the following conversions
TLS_ENGINE_X -> CRYPTO_ENGINE_X
tls_engine_type_t -> crypto_engine_t
It does not change numbering of engines
Change-Id: I872dfaec3a6713bf4229c84d1ffd98b8b2419995
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: feature
This changes the behavior of both API calls
APPLICATION_TLS_CERT_ADD & APPLICATION_TLS_KEY_ADD
certificates and keys aren't bound to an app, they are
passed to it via connect / listen using the message
queue.
This should be followed by a per protocol (QUIC/TLS)
crypto_context store to save devrived structs
Change-Id: I36873bc8b63b5c72776c69e8cd9febc9cae31882
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
- Convert asserts in vpp_echo to conditional checks
- Refactor error logging for session creation/deletion
- Fix session close anomalies
- Fix ECHO_* macros
- Add rx/tx results different cmdline options to
specify pass when counters are different
- Update close tests to send more than the fifo
sizes of data
- Specify rx/tx results diff options for early
close tests
- Set listen session state to closed on handling
unlisten reply
Type: fix
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I9d0075fcb18e20829f420da104d69523897b0552
|
|
Type: fix
Some cli processes, including configuring an test flow
on an i40e interface consume more than the currently
available stack space.
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I3df53d251cd43286f94647384d6e50a463bad15c
|
|
Type: fix
Change-Id: I7c38d2ad6364f098529f51c15b533eb234b82716
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Adding the thread handle to the api main structure allows the client process of
the bin api to manage the thread, like setting the thread name for example.
Type: feature
Change-Id: I38b58ddc83d5958c4bda76eadd371eee1545724b
Signed-off-by: IJsbrand Wijnands <ice@cisco.com>
|
|
Type: refactor
Change-Id: I4f370b09e22dbbc8920272df9a042dae04825bfc
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Add SESSION_F_IS_MIGRATING flag for session. It is set by the session
layer before poking the transport for migration. It's the transport
responsibility to unset the flag & act apropriatly if RX happens on
a migrating session.
Change-Id: Ie722917f1cf9344d8f041cad4ed8b064fb5853b6
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Support create/delete interface with PP2 api
Type: feature
Signed-off-by: Jianlin Lv <Jianlin.Lv@arm.com>
Change-Id: Ia9c0ac0f237fd9f71f5480d736d6bcabee763fff
|
|
Type: fix
Fixes: de34c35fc73226943538149fae9dbc5cfbdc6e75
Change-Id: Ia714c2e46627864091d3f686dbced4cdd9c1a773
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
documentation
The sample_plugin_doc.md file refers to VPP_WITH_SAMPLE_PLUGIN make
parameter, while the VPP makefile uses SAMPLE_PLUGIN instead.
Type: docs
Signed-off-by: Haggai Eran <haggai.eran@gmail.com>
Change-Id: Id11090fcdc78b77e246da48d0d890865011f1132
|
|
In a rare event, after the vhost protocol message exchange has finished and
the interface had been brought up successfully, the driver MAY still change
its mind about the memory regions by sending new memory maps via
SET_MEM_TABLE. Upon processing SET_MEM_TABLE, VPP invalidates the old memory
regions and the descriptor tables. But it does not re-compute the new
descriptor tables based on the new memory maps. Since VPP does not have the
descriptor tables, it does not read the packets from the vring.
In the normal working case, after SET_MEM_TABLE, the driver follows up with
SET_VRING_ADDRESS which VPP computes the descriptor tables.
The fix is to stash away the descriptor table addresses from
SET_VRING_ADDRESS. Re-compute the new descriptor tables when processing
SET_MEM_TABLE if descriptor table addresses are known.
Type: fix
Ticket: VPP-1784
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I3361f14c3a0372b8d07943eb6aa4b3a3f10708f9
(cherry picked from commit 61b8ba69f7a9540ed00576504528ce439f0286f5)
|
|
Type: fix
Change-Id: I543e2e5976cb384b81278a7ec98a0a6ab1612438
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: Ibb8e7c1c13869c1dce2385f58bd7260fcf776c5a
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Change-Id: I3fe27a8ef577741d9a5c4f090ec91cf68fb44fe3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Include a binary API change NOT suitable for cherry-picking into 19.08
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Id369514a3085f5e4bcee34819c55c4636df9b518
|
|
Type: feature
Change-Id: I0e049b28d8c21b67ea4545e865eda4e88f10e485
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Signed-off-by: MathiasRaoul <mathias.raoul@gmail.com>
Change-Id: If371cde9412be29634164830c58634da248ad0ae
|
|
Type: fix
Change-Id: I80cb666d9eae9d0f780d51fb95454d97ed320454
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
The old code modified the node next array prior to obtaining the thread
barrier. Then it updated the runtime node data, and upon barrier release
caused reforking of each worker thread. The reforking clones the main
thread nodes and reconstructs the runtime node structure. This cloning
is not 100% "deep" in the sense that the node next array is
shared (i.e., only the pointer is copied). So prior to the barrier being
obtained the node's next array is being changed while workers are
actively using it (bad). Treating the node next array as read-only in
the workers and sharing it is a decent optimization so instead of trying
to fix that just move the barrier a little earlier in the process to
protect the node next array as well.
This was tripping an assert in next frame ownership change by way of the
ip4-arp node. The assert verifies that the node's next array length is
equal to the runtime next node count. The race above was lost and the
node next array data was updated in the main thread while the arp code
was still executing in a worker.
This was being hit when many arp requests were being sent from both ends
of a tunnel during which the add next node function was called, which
often led to an assert b/c the next node array was out of sync with the
runtime next node count.
- PS#2 update - move barrier sync to just above code that modifies state.
Ticket: VPP-1783
Type: fix
Signed-off-by: Christian E. Hopps <chopps@chopps.org>
Change-Id: I868784e28f994ee0922aaaae11c4894a3f4f1fe7
Signed-off-by: Christian E. Hopps <chopps@chopps.org>
|
|
Type: refactor
Change-Id: I067fc7dbcc0985277df01384d9dcdb0bdf62fba5
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Fixes: de34c35fc73226943538149fae9dbc5cfbdc6e75
Change-Id: I256ef153b3b27a1f7ab7daa45015a2ec4bc84076
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Fixes: de34c35fc73226943538149fae9dbc5cfbdc6e75
Change-Id: I79589f648f4c75762e5277fb94636a91fa36ccdd
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Change-Id: Ifcbfeecd6ca1215ec473eec4cce736ab4eacde80
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I7ed9726d8c5ca26715a84b004a18fd7f93142486
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
TX queues must be created before RX queues on Mellanox cards in order to
not receive our own broadcast packets.
Type: fix
Change-Id: I32ae25a47d819f715feda621a5ecddcf4efd71ba
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Missing an increment in the while loop. Hashes not stored in the array.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I603027f5a7305478f48a102ac8035ffde9102c53
(cherry picked from commit 0471cdbd3fe04a88a8b70b5f0eff0c378e19abf7)
|
|
Type: fix
Change-Id: I35fb6fdfba50c4a59cf1ffb94cb51487bcf5afc9
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Prints the interior node vector rate, rx / tx / drop rates
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I57130db0f99e852a8498aa90d01e52f7ac33dcc9
|
|
The rdma driver use the pci subsystem, make sure the dependency is
recorded.
Type: fix
Change-Id: Ibd613f623d355612881acc31b9423f2de13793a3
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
If no Linux PCI driver module is loaded, then the driver_name in the PCI
info struct is NULL. This can triggers crash when checking driver name
eg. in vlib_pci_device_open().
Default to "<NONE>" as driver name, which should never match.
Type: fix
Change-Id: I9e69889a7566467bd8220b92bbbaa72ada957257
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
-add prealloc_fifo_pairs member in echo_main_t
-new cli parameter in vpp_echo
Type: feature
Signed-off-by: MathiasRaoul <mathias.raoul@gmail.com>
Change-Id: I6bb1214ee93e06421cd0a3721420278c51cd59c4
|
|
Type: feature
Change-Id: I6d6ac649094ef4bee2aed311915dd58f11972e79
Signed-off-by: MathiasRaoul <mathias.raoul@gmail.com>
|
|
Type: fix
Change-Id: I46b166b3a10c4543eafa4422531dd3c725db45f1
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
-Update quicly patches
-Remove event logger (removed from quicly).
-Update quicly functions calls
Type: feature
Signed-off-by: MathiasRaoul <mathias.raoul@gmail.com>
Change-Id: I0355befeb5ce961928f17225c83890ba87cf6ebc
|
|
Type: feature
Signed-off-by: MathiasRaoul <mathias.raoul@gmail.com>
Change-Id: I8d71078a9ed42326e19453ea10008c6bb6992c52
|
|
Type: fix
Change-Id: Iac91c086c4e975f0bada058f40b7b7d4475377f8
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
There is no bt->samples for this test, do not use it.
Type: fix
Change-Id: I2090290887bc5c0b5cdb0561cf2bf72a87781089
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
ACL tests use random port number in the tests.
A port number 6081 causes the decode in scapy
to consume some of the Raw payload into GENEVE
encoding, which breaks the test.
Solution: bring up the lower range of random
port to 16384, so that it does not touch any
of the well known ports.
Type: test
Change-Id: I022660d8ec147857924b436f1871b0b5ddcf4c47
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Allow for setting the maximum number of generated packets to be included
in the frame passed to next nodes. This is very important for testing
code which may be susceptible to multi-frame vs single-frame bugs (e.g.,
code that is doing re-ordering where packets may be buffered between
frames).
Update:
- remove redundant packet "rate" option.
- reduce n_max_frame to u32 as that's what pulled from the CLI.
Type: feature
Signed-off-by: Christian E. Hopps <chopps@chopps.org>
Change-Id: Ie362bbb110b2cf01d9f65c559bbe9101e17b7fdc
Signed-off-by: Christian Hopps <chopps@labn.net>
|
|
- code added to release the mbuf's to main pool during memif disconnect.
Type: fix
Change-Id: I504dacc9a40bc1702831cf3208fd532d1ae68a6f
Signed-off-by: Padma Ram <padmaram86.raja@gmail.com>
|
|
Type: fix
Change-Id: I132112bf77e1fad7fc0227a96e6b0cee590295e8
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|