Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4dbbf8456d0ed2350459fcdc0664bbae024072fc
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2c5c9e3e7eff8481e48a940e8420d236a16e7649
|
|
Type: fix
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
Change-Id: I5a73e45e5b8a6a97c068e1ca108d8f8a2c1c0f90
|
|
virtio 1.1 defines a number of new features. Packed ring is among the most
notable and important one. It combines used, available, and descripptor rings
into one.
This patch provides experimental support for packed ring. To avoid
regression, when packed ring is configured for the interface, it is branched
to a separate RX and TX driver. Non packed ring should continue to perform
as it was before.
Packed ring is tested using qemu4.2 and ubuntu focal fossa (kernel 5.4.0-12)
on the guess VM which supports packed ring.
To configure VPP with packed ring, just add the optional keyword "packed"
when creating the vhost interface. To bring up the guest VM with packed ring,
add "packed=on" in the qemu launch command.
To facilitate troubleshooting, also added "verbose" option in
show vhost desc CLI to include displaying the indirect descriptors.
Known qemu reconnect issue -
If VPP is restarted, guest VMs also need to be restarted. The problem
is kernel virtio-net-pci keeps track of the previous available and used
indices. For virtio 1.0, these indices are in shared memory and qemu can
easily copy them to pass to the backend for reconnect. For virio 1.1, these
indices are no longer in shared memory. Qemu needs a new mechanism to retrieve
them and it is not currently implemented. So when the protocol reconnects,
qemu does not have the correct available and used indices to pass to the
backend. As a result, after the reconnect, virtio-net-pci is reading the TX
ring from the wrong position in the ring, not the same position which the
backend is writing. Similar problem exists also in the RX.
Type: feature
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I5afc50b0bafab5a1de7a6dd10f399db3fafd144c
|
|
Merge two memcpy into one by swapping src and dst address in
l2fwd_trace_t.
Type: improvement
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Change-Id: I71c5ecad0b453a434b1cb292ef03d88a760255c8
|
|
i2c follows its only use case - the original 82599 driver - into
extras/deprecated.
cj is/was an emergency debug tool unused in several years. Move to
extras/deprecated/vlib
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ib55b65373f62630db295c562974bd8f2456c3107
|
|
vxlan_gpe_init() is already defined in libvnet. When loading ioam plugin
we end up having 2 different objects using the same symbol.
ASan in GCC-10 started to enforce the One-Definition-Rule and it seems
like good hygiene anyway.
Type: fix
Change-Id: I2ea9af1821bca6482a290742e9a109fc25692f37
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
GCC-10 increase overflows-related warnings but is confused by SIMD
operations.
Type: fix
Change-Id: Iafde754c2fbec60e2d0a328f295b1f5c156d8234
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
When use the kv->v.memory_owner_thread_index as the index to get the
reass in pool, maybe this element is freed by the owner thread because
of timeout, too many fragments, and so on.
So we should check if do_handoff with kv->v.memory_owner_thread_index
before get the reass from pool.
Type: fix
Signed-off-by: Gao Feng <davidfgao@tencent.com>
Change-Id: Ie0f1dc368f86d0fd65292ca0c5e1908348015e09
|
|
GCC-10 increase overflows-related warnings but failed to infer that
b->n_cached_bytes is always < sizeof(uword).
Type: fix
Change-Id: I956ae609abc9e39d4a932e5801510999d7d27b79
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
To allow the use of WARN_ON/OFF macros to selectively disable build
warnings.
Type: fix
Change-Id: Iceb9d28b2b80c373afb51900880c23041be836db
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Change-Id: Ic2d9b17cf5e524f3ad2a3c5343fe1230aa360e73
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Use the up parameter in vnet_netlink_set_link_state(). It was
ignoring the parameter and always setting IFF_UP on an interface.
Change-Id: I0d44406d982afbdc43bc6b26d0f22c0bdd47abdc
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Idbbad246161d28f595c25e10d7282c8b33fa9876
|
|
Previous behavior worked only when subinterface ID matches with dot1q tag and doesn't work at all in QinQ case.
In this patch I'm checking how subinterface is configured.
Type: fix
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
Change-Id: I7a662a0442fdc8e68aba5d6f469f3b1139a4bc2d
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I02d60134d6069764da75dc6d206b376a0d46998e
|
|
Type: improvement
Can be used to force app to close a connection on which it still waits
for data.
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7c3a8245cbbc23728e4408feb63a659a11f718ed
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I3429f9d0406b6d710846fc82d77400f26f77fdf4
|
|
Minor change to vec_sort_with_function(...): don't depend on the qsort
implementation to deal with null, zero-long, or 1-long vectors
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I7bd7b0421673d2a025363089562aa7c6266fba66
|
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I026f0d8385b538e543bae0c1f7e56e49e4713ba1
|
|
With port overloading, port is no longer a scarce resource and there
is no need to limit connections per internal IP. This saves one hash
insert in slow path.
Type: improvement
Change-Id: I8a7a9713ac855fa99fa1617ec684f757cf6e09ae
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I50df248afb3f6b46c49e6695b3f124cfd584f016
|
|
Use out2in_ed hash table for port overloading tracking instead of
global table. This reduces number of hash insertions in slowpath.
Type: improvement
Change-Id: Iad4e897d52033beb7f6d76a7ddb596eef586c6cb
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Fixes: b86437b79b82493c2e9728929df417f55b153824
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I2c833928dcdceb4d23dfc161bcc3358272076980
|
|
Type: refactor
Change-Id: Ib2d4a11ffa0e1e56ca05705ba8cdf84e6cc66427
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
interface
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I0b7c189006e30a357cd6be4f3c9c61fded4157cb
|
|
When checksum is enable for IPv6, it erroneously set the flag
VNET_BUFFER_F_OFFLOAD_IP_CKSUM. That flag is meant for ip4 packets only.
Type: fix
Ticket: VPP-1857
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Id03b2937bfa34e2a9b50a36aafe0700bad7fb95e
(cherry picked from commit f78294d8468f156e066e7e69aab3a1b285810c3a)
|
|
add bypass/discard functionality to ipsec4-input-feature node
Type: feature
Signed-off-by: ShivaShankarK <shivaashankar1204@gmail.com>
Change-Id: I152a5dfee0296109cccabe349a330dbbe395cc6c
|
|
Type: fix
if the ,api/.json specifies that a enum should be u8/u16 that the
generated c enum needs to be packed.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ia0497b45e4c510a5c63cd02e966769bf20686838
|
|
Add a suitable ASSERT in the bihash template in case this happens again.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ib370d4238f6bae2995bc30fd17fad5c41053c3d1
|
|
Extending the fib_index_to_table_index could leave entries uninitialized,
pointing to the session tables at index 0. That session index exists by
default, but it is a IPv4 session table. That would break all IPv6 on
the unitilized fib indexes.
Type: fix
Change-Id: Ie3f0a87a7f829ceb39f75ec06658b0ad1d3813ae
Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
|
|
* Avoid doing expensive bit extraction for most likely case where bucket
.log2_page_size == 0 and .linear_search == 0, saves 3-5 cycles for
lookup, data_prefetch and add operation
* use bextr instruction when available (x86 BMI instruction set)
Type: improvement
Change-Id: I163df36a29287482c5f133be8b21d62a2f7440de
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
- replace functions for prefixes attached to interfaces
- add ip_interface.[ch] to consoldate the functions
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I9c0c39c09dbf80ea1aadefee02c9bd16f094b6ad
|
|
Type: feature
DB replace is implemented with a mark and sweep algorithm (just the the
FIB)
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I54ab06e11552219e2a18e1b4a87d531321cf3829
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I98f943c8862fa74fb576f9ec1fb9186289b1216b
|
|
Type: improvement
allows the CLI command to be used from a config file
Change-Id: Id9e7ad71b208317a65b1ed4065b0cb8777aee6ec
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Id28299a188feefa1899d835fd499f018af95d81b
|
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I8c9f5330879fb8f51792b4476d5f0c873dbe4d7a
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie212a43c435cfa7f8fac65d1620258913611c527
|
|
Make sure we disconnect from vlib prior to free-ing the last worker, as
we'll need to access it.
Type: fix
Change-Id: Id5bdd17f0f5efa1ce52021b4270eb4f1e95cc61d
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
bts can be freed by the call to bt_fix_overlapped(). Save flags for
later use.
Type: fix
Change-Id: If8b48c96ce39e38f2ed7f4db2815122523eb2e05
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ifa4916ffeaa30039e366011109bbd2e9c91a1b0b
|
|
- restrict the unittests SVM address space to what is supported by ASan
- mark SVM mmap()ed address space accessible for ASan
- SVM shared memory heap scheme means some allocation can happen
outside the current process. Lazily mark those accessible for ASan
Type: fix
Change-Id: I7c196c80b2a5297651d0afa54f1a8e478fcf59b1
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Change-Id: I6627e22110be94c8127486ae009761494e734c04
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Change-Id: I85f6ec77187a4983c66c5e22fd39fbb2cef82902
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I9ec87d2293d8f92c3e488a0f61083cf815ac496c
|
|
Type: fix
Change-Id: Ic7441a09bab2cabc7632ee502368584ac022f997
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Change-Id: I0eaedeee03dd3b4453edec7fca2a5c741a98de23
|
|
Leak Sanitizer is not stable yet with VPP. It can always be enabled at
runtime with ASAN_OPTIONS=detect_leaks=1.
Type: fix
Change-Id: Ieff01091e2976e127783ebd331cd0e50a1dbca12
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
The patch brings 0.8 clocks saved per pkt in IPv4 l3fwd case on Skylake.
Type: improvement
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Change-Id: Ia8d3a27773bf959433380d7c219602b1e4a8e5bd
|