Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I5009fcfde5c627d59dea3edda15486b9392134a2
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
vnet_feature_arc_init:215: feature node 'mpls-qos-mark' not found (after 'vlan-mpls-qos-record', arc 'mpls-input')
vnet_feature_arc_init:215: feature node 'ip6-qos-mark' not found (after 'vlan-ip6-qos-record', arc 'ip6-multicast')
...etc...
Change-Id: I22cb98d57e2480f5978fff315b77b9cbb6a9f9dd
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
(cherry picked from commit 8d753f906ecdd152af1e524919e99bd9ab45de46)
|
|
Change-Id: Icec79aa9039d5d7835d311fde0b7c1a0c76c9eb1
Signed-off-by: Neale Ranns <nranns@cisco.com>
(cherry picked from commit 0809f6c0300f85cf5cf5d49df1aa8f1e2d080f6c)
|
|
Can happen if code bypasses the per-interface output node, and
dispatches packets directly to the tx node.
Switch to vlib_get_buffers(...) ... vlib_buffer_enqueue_to_next (...),
quad/single loop coding pattern.
Change-Id: Ic0e5d3b9748230f4e545a54186e6e64e7a782bb1
Signed-off-by: Dave Barach <dave@barachs.net>
(cherry picked from commit 78451a6a660cd26a67d2284219f48878a2dfe2c3)
|
|
each edge/arc from these nodes must be the same.
Change-Id: Id5dace61bca0af71ad1df98583425226e81fd0de
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
(cherry picked from commit 8a03e4f97952d84e152f5b17d5325583604c4fd3)
|
|
Change-Id: I7513c41307e62068ab5d9739cac393675c6066f8
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
(cherry picked from commit 22b3b846822df2701bb6cb508fa4e023526e5717)
|
|
Change-Id: I2abb3ceebae3a32cee9aa2a999bd47c37719d3ac
Signed-off-by: Eyal Bari <ebari@cisco.com>
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
(cherry picked from commit 07f3586c5a9868ccee381af528de39b373d7720a)
|
|
Change-Id: Ia563b279e85b5da93f79db5a2a4d9b8c04f5be99
Signed-off-by: Eyal Bari <ebari@cisco.com>
(cherry picked from commit b52c034c7d53014e9d5c1dfc3501e9adfb0c6391)
|
|
Change-Id: I5c381dfe2f926f94a34ee8ed8f1b9ec6038d5fe2
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
(cherry picked from commit 208c29aac523231af2420a95ba7e5d361698780b)
|
|
Change-Id: I23be9c29227e7dd1bb11b5b7fa910bb61c2be6c9
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Remove broken special case from l2_input.c:set_int_l2_mode(), which
turns out to confuse the graph dispatch engine.
The loopback TX function needs to push packets to either
ethernet-input or to l2-input, based on bridge / BVI
configuration. Rather than overloading a single graph arc - and making
vain attempts to reconfigure it - create both arcs and use the correct
one.
Rewrote the loopback tx function as an idosyncratic multi-arch
quad/single loop fn.
Change-Id: I15b56ce641d90a11e7b3c7d23859f40e168dd7b2
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
For L2 ARP termination, use both brodcast ARP request and reply
packets to provide MAC/IP binding events.
For IP4/IP6 neighbor adress resolution, send resolution events
if there is an address resolution attemp with a static neighbor
entry where both IP and MAC matches. This allow probe of an IP
neighbor with a static entry to confirm it is responding with
a reply matching that of the static entry.
Change-Id: Iffb923bb5aea3f9021436735d5ca06e7b24f966f
Signed-off-by: John Lo <loj@cisco.com>
|
|
The driver implements Cavium QLogic FastLinQ QL4xxxx 10G/25G/40G/50G/100G
Intelligent Ethernet Adapters (IEA) and Converged Network Adapters (CNA)
(doc/guides/nics/qede.rst)
Change-Id: If17e8cb572eb8c0585085be1c7cfdfa159eb6e68
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
Change-Id: I72978c5957cb1acf154c9de7ad153092bac37785
Signed-off-by: Francois Clad <fclad@cisco.com>
|
|
Change-Id: I1f82c40f9f927296d5d439b0db70a70ef803cf3c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Add "show version cmdline" to display the command line
Add doxygen tags to the source code
Change-Id: I0205b373062fd88f176d9c8086d89d7784a5172f
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Remove useless unsigned comparisions: "(unsigned) value < 0", correct
a couple of incorrect limit checks.
Change-Id: I9606c4057df157f770d59535457cb9df1cfd1f35
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I28d05a04abd11f630035d34ce573016c77ffab53
Signed-off-by: shenJibiao <shenjibiao@corp.netease.com>
|
|
continue statement in case bypasses cleaning up of unserialized
node
Change-Id: I0103d31df2eed3ed04d7cdcdfb790f4d9a376336
Signed-off-by: Dave Cornejo <dcornejo@netgate.com>
|
|
When creating a new - as opposed to recycled - debug CLI process node,
perform a proper barrier sync and node runtime update. Otherwise, the
graph replicas diverge for some period of time. That's not immediately
fatal, but it's not a good idea, either.
When renaming a debug cli process node, fix all of the name-vector
replicas before freeing the [one-and-only] name vector.
This fixes the so-called stats segment node runtime scraper crash,
which tripped over a replicated dangling reference to the
recently-freed debug CLI node name.
Change-Id: Ieffabd9f003139e534b9d79b88370439907930e5
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
Causes clang validation failures. The patch did not actually pass validation; unfortunately it received a +1 from fd.io JJB - presumably due to a race condition
This reverts commit 779c865cc6c7af5bb435d8b3465d80685370edb2.
Change-Id: Ica3697f8f90e67d3eae4debc597f27d7d512004a
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
Change-Id: I51c4bcbd456d2e7ffbdeef9cc8c7703d1c88b52e
Signed-off-by: Francois Clad <fclad@cisco.com>
|
|
thanks to coverity... validate that the length of the packet on
wire matches the size of the header based on the number of groups
and sources. drop those that don't match.
Change-Id: Iab3f3a835f6a43d9c73c5d502ea5ceccdd6985b0
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Node serialization is turned off by default. To enable it do:
statseg {serialize-nodes on}
Change-Id: I53bba3cab517bd3ba90eba52d94b3ebb16870141
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ie7a64318f10ebb535c98aff4e25cdfc48f60ff33
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
VPP-1340
Change-Id: Ia3f2fc054dbfb2ba912a768c70466e7042024e32
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
It is cheaper to get thread index from vlib_main_t if available...
Change-Id: I4582e160d06d9d7fccdc54271912f0635da79b50
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
no_flood count was not updated on removal
might couase a negative insertion index when adding new members
Change-Id: I2caf2c453dfef1a9f16fb8fa2e5af42b4e653a69
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: Ie7621a38a44e7c692e23e58c43d27d8d2aab43e6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I2cb4cf2167b6e958d2e57b461848a4a189e3fda0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I57f1db6fabfdb8ddfba514ad754707b24d47c962
Signed-off-by: Francois Clad <fclad@cisco.com>
|
|
Add missing VALIDATE_SW_IF_INDEX macro / check.
Net of this fix, a spurious warning will probably recur. Coverity will
complain that sw_if_index is tainted. Please dismiss the warning.
Change-Id: Iec31ce1d86f742e197e63b0c5d474cd5e496ee5f
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Id3ccfcfa2a88cf7aa106f1202af7cd677de32575
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Freeing the prefix and address vectors after signalling them from
dhcpv6_client_node_fn to either the pd or iana report processes is
absolutely wrong. The code has appeared to work by luck.
This took three full days' worth of expert effort to root cause - in
the context of an unrelated patch - and about one minute to fix.
Change-Id: Ie589ab1a70ae83441ab4e8b6618a6d405741f53f
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Id6aba75c30712e9a0ac7b3075bd6cfc49d6bec36
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I57b4ebca29c0b185770373e8878f89a9bd13b742
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I56eb15f8fd2d3049845287dc3df7870582764f8b
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: If4da80c7eefe55905594eaaba0946d75f0892da5
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
Change-Id: Ieb8020f57ed5ad20daf552cd62ae3fdd8c573926
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Increase batch size when recycling buffers. This increases Mpps by 7%.
Change-Id: I2a460611d9c36e9bf087b076fc4e187acf61108f
Signed-off-by: Brian Brooks <brian.brooks@arm.com>
|
|
Change-Id: I5e5b2dd4f4bc3e257824015c723228ac5128d6a0
Signed-off-by: Brian Brooks <brian.brooks@arm.com>
|
|
- Enable/Disable an interface for IGMP
- improve logging
- refactor common code
- no orphaned timers
- IGMP state changes in main thread only
- Large groups split over multiple state-change reports
- SSM range configuration API.
- more tests
Change-Id: If5674f1044e7e97274a711f47807c9ba689d7b9a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I0d4630c88d6caacffcd073ebaa12766dfc893f70
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: Idee565af852c7bb434b886fbf31c6e76315686c4
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Errors occur when building a library outside the VPP
source tree that uses the shared memory API because
vnet/devices/pipe/pipe.api.h is not installed but is
included by vnet/vnet_all_api_h.h.
In src/vnet.am, Add vnet/devices/pipe/pipe.api.h to
nobase_include_HEADERS.
Change-Id: Id3dc28d90f41bb0ff576736f9d77bee19a2b8fdd
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
When using a DPDK cryptodev with IPsec, sending outbound
packets results in a crash on division by zero if using an
algorithm not supported by the OpenSSL ESP nodes. This
includes AES-GCM and MD5.
At IPsec intf creation time, the next node at slot
IPSEC_OUTPUT_NEXT_ESP_ENCRYPT for ipsec_if_tx_node_fn is
set to the node named esp-encrypt. This is the OpenSSL
ESP encrypt function. If DPDK cryptodevs are configured,
dpdk-esp-encrypt is the correct next node.
Change to setting the next node according to the value in
ipsec_main.esp_encrypt_node_index. That value is set to
esp-encrypt by default. If DPDK cryptodevs are configured
it gets set to dpdk-esp-encrypt.
Change-Id: I83896c76b975d74aead247a162c85eccca9575a8
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: Ic5daed1f6c23d9561a04e235dcbf257f190d066a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
It also refactors the vhost code which was in one big file vhost-user.c.
Receive side code is in vhost_user_input.c and
Transmit side code is in vhost_user_output.c
Change-Id: I1b539b5008685889723e228265786a2a3e9f3a78
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
A pipe resembles a unix pipe. Each end of the pipe is a full
VPP interface.
pipes can be used for e.g. packet recirculation, inter-BD, etc.
Change-Id: I185bb9fb43dd233ff45da63ac1b85ae2e1ceca16
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Meant for single reader/writer message exchanges. Supports multiple
message rings.
Change-Id: I925de9a6ae19226c5c39a63caff76424ed123a13
Signed-off-by: Florin Coras <fcoras@cisco.com>
|