Age | Commit message (Collapse) | Author | Files | Lines |
|
Rename vec_capacity to vec_mem_size as it returned the size of the
underlying memory allocation not the number of bytes that can be used
for vector elements.
Add new vec_max_elts macro that returns number of elements that can fit
into generic vector.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2e53a2bfa6e56a89af62d6ddc073ead58b8c49bb
|
|
Change-Id: I09d2da73eff42c52ba1373acc99ff28f283a6725
Type: improvement
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
With DPDK plugin, VPP does the DMA page map in IOMMU, only when
DPDK supported ethernet devices are present. As a result, Mellanox NIC
and QAT combo doesn't work. As part of this fix, DPDK supported
crypto device check is added to do the DMA page map.
Type: fix
Signed-off-by: mgovind <govindarajan.mohandoss@arm.com>
Change-Id: I02de4588c5b021e0c9c62612137f28ed8784bea6
|
|
Type: improvement
Change-Id: I85dd3d34bcb175dd68dda34a58cd454848a0fc2b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fixes a minor issue that causes printing an error message when there is no error.
Type: fix
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I59f5c6af7c5aeae3e812b4cf0c75a47894bb8bbd
|
|
Type: fix
Change-Id: I298d2a5067f7949002e6c010f892553f1eb9f477
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
This patch improves the per dpdk-input loop number of packets
received from the port. The change mimics how packets rx happened
before VPP 22.02/DPDK 21.11: instead of trying to rx huge number
of packets (256) in one go, rx more times with up to 32 packets
max each time.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: I804dce6d9121ab21b02e53dd0328dc52ac49d80f
|
|
Thanks to Ben McKeegan <ben@netservers.co.uk> for the report.
Type: fix
Change-Id: I8170dda572c326b6b1823fd330dbd5e961fdad74
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
The tlsmbedtls plugin should only be built if mbedtls libraries are
present.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I24364177d24ea744f24f808f492be08adff3690b
|
|
This fixes a crash caused by client closing socket before adding worker.
During detach vpp tries to delete worker based on invalid worker index.
Type: fix
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I3242bcbb116ef5fd1d4c449f5bcf907e4e2f8f30
|
|
Type: refactor
Change-Id: Ieb7a595e40d801af5349c83b128fa92c7698a346
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I2eb5543aa470094d4c5ad420a2fcc9873b7808e1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Recent "dpdk: refactor device setup" have broken vlans programming for IXGBE_VF.
Type: fix
Signed-off-by: Dzmitry Sautsa <dzmitry.sautsa@nokia.com>
Change-Id: Idacda33a473f6b10dbe002d9926661a19d0f3f97
|
|
Type: refactor
Change-Id: If180816303909b92c9aa4ff9fd70dc7938a6cfbe
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: refactor
Change-Id: I0a40e22e1439e13ffdbcbd6fd7cad40c8178418c
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I3425350f5e874df79716bd726900540629793beb
|
|
Type: fix
The l2unfragmentable size is not included in the calculation of 'max', the maximum amount of data that can be added to a fragment, therefore the fragments created are too big.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Id1e949ad98203b6f8ea2f55322ef6fa3d507e2a6
|
|
Type: refactor
Change-Id: Ifd533a095d979dc55bfbe5fac7e0b7510a4d900c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Deadly combination is clib_{set,long}jmp + lazy linking + tail call compiler
optimization. On the first call to clib_setjmp, dynamic linker executes loader
code which then calls clib_setjmp, so stored stack position contains dynamic
loader data. Tail call optimization simply jumps back to the calling
code when clib_longjump is called and that results in wrong return
address used from the stack.
Change-Id: Ia7d8dbd5b2c425cdd0449374aa07ab6b684a330e
Type: fix
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
Change-Id: Ica3e60836c0f26518ba2c238a8c03ce3648ea69b
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
As per IPSec RFC4301 [1], any non-matching packets should be dropped by
default. This is handled correctly in ipsec_output.c, however in
ipsec_input.c non-matching packets are allowed to pass as per a matched
BYPASS rule.
For full details, see:
https://lists.fd.io/g/vpp-dev/topic/ipsec_input_output_default/84943480
It appears the ipsec6_input_node only matches PROTECT policies. Until
this is extended to handle BYPASS + DISCARD, we may wish to not drop
by default here, since all IPv6 traffic not matching a PROTECT policy
will be dropped.
[1]: https://datatracker.ietf.org/doc/html/rfc4301
Type: fix
Signed-off-by: Zachary Leaf <zachary.leaf@arm.com>
Change-Id: Iddbfd008dbe082486d1928f6a10ffbd83d859a20
|
|
While setting an ACL, a user can specify the adjacency to follow after
the input ACL node. Thus, we may skip a lookup and enter directly a
local node (ex: ip4_local). To prevent the local source check from
failing, we need to specify the fib index. And, we have to do it just
before exiting the input ACL node because the l2_classify object
is overlapping with the fib_index in the vnet_buffer_opaque_t struct.
We could have added a padding to avoid this overlap but there is no
place for that in the structure.
Type: fix
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
Change-Id: I383c36e4aec08d181f966f28565aefed950d2a74
|
|
Type: improvement
Currently, when an interface is brought down administratively, IPv4
routes that resolve through that interface remain in the FIB. However,
the kernel removes those routes but doesn't send any notifications about
that. Desynchronization between the kernel and VPP happens.
With this change, when a notification received from the kernel
indicating that an interface was brought down, in addition to bringing
the VPP interface down, walk the IPv4 FIB bound to that interface and
remove any entries that resolve through that interface and were added
with one of the linux-cp FIB sources.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I0cd14bb63c9e6616ae1c5739b17c3bf33b186bc2
|
|
Type: fix
- IPv6 fragmentation did not work if the packet spaneed multiple buffers, because the 'len' calculation to did max out at the size of a buffer
- IPv6 fragmentation did not work when the l2unfragmentable size was non-zero, it was not used in the correct places
- IPv6oMPLS fragmentation would fragment all IPv6, it should do so only for link local
- IPv6oMPLS should send back TooBig ICMP6 for non locally generated
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ie8f02cdfdd7b7e8474e62b6d0acda8f20c371184
|
|
Type: fix
Primarily fix an issue reported by Coverity in
lcp_nl_open_sync_socket() that close() could possibly be run with
negative fd. Also, add more checks and error logging there.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I9a88520d068392977a6eba0766451e5652fe512c
|
|
Type: improvement
Currently, read event signal is sent on every notification message
received and added in the queue.
With this change, signal read event only when all currently available
notification messages are received.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: Ib86d189311ce01f50167e4e97feb99df0292ad96
|
|
Type: improvement
Currently, while reading notifications, ENOBUFS error is ignored and
reading continues. This was done to minimize the number of notifications
that are lost due to reopening the socket.
Now that synchronization is implemented to recover from socket errors,
ignoring ENOBUFS and reading as much notifications as possible is not
actual. Before synchronization, all currently enqueued notification are
discarded in any case.
With this change, stop reading notifications if any error occurs.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I1184d9a3aa99df63ef59bc2a67be2b1e5e0e9329
|
|
- make sure we do not overflow
- skip unknown messages if we can
Type: fix
Change-Id: I0efbe7376d9d78f6b0ec8018c0813400e6653698
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
if original packet was to the link local, then the
fib index in the buffer is that of the LL table, we can't use that
to foward the response if the new destination
is global, so reset to the fib index of the link.
In other case, the fib index we need has been written
to the buffer already.
Add a test for IPv6 ping in an MPLS-VPN where int inout interface is
not the the same VRF as the response should be sent.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I18a232d90ddd3ef051a52476c5d861c87060e76f
|
|
Type: improvement
For error conditions, such as TTL expired, dest unreach, etc, Rate limit the sending of ICMP error messages.
The rate limiting is done based on src,dst IP address of the received packet.
the rate limit has been chosen, somewhat arbitrarily, to be 1e-3. This is the same limit as the ARP throttling.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I4a0b791cde8c941a9bf37de6aa5da56779d3cef4
|
|
Type: improvement
When dump of neighbors is requested, the replies will also include
neighbor entries for IPv6 multicast addresses:
GigabitEthernet0/8/0 S ff02::16 33:33:00:00:00:16
GigabitEthernet0/8/0 S ff02::1:ff76:7135 33:33:ff:76:71:35
GigabitEthernet0/8/0 S ff02::2 33:33:00:00:00:02
Such entries are not reported in netlink notification messages and
VPP is unlikely to use these.
With this change, ignore neighbor entries when the IP address is a
multicast address.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: Ic712aa4904f1d559f31fd89ff4541268e2340f84
|
|
ip6_ext_hdr_chain_t->eh is IP6_EXT_HDR_MAX elements.
Type: fix
Change-Id: I28b8d610d8f5c0c520c8391c37b86e837655ab12
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
This patch removes the assert and it is unnecessary.
Because given variable is used for branch testing.
Change-Id: I64f57f909fcba205216296e86c1cde2a5dadbb45
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Change-Id: I5dda196ab8f1b634fcac46acd5c57a6dd726759c
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I2b8b6a3b5a6df71e84ce2f15ef7117f390121c2f
|
|
Add the possibility to create masks and matches without l2 header in the
CLI when creating tables and entries. This is useful for tables working
on l3 and l4 only.
Type: improvement
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
Change-Id: I7da9e47d810c0b4a0938e2cb3bc31aa69ace3649
|
|
Type: fix
the MTU needs to be adjusted to account for the label stack, since the size of fragments produced is stack+mtu.
these changes are to the use of the stack variable 'mtu'
most of the patch results from appeasing checkstyle.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I8d0e10cf52ca4dd8ecdc224ed6c54a13e4768fdd
|
|
Type: fix
it only display the first flag set
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I45cddbac0d4eed8bda10bf5e0f7c9db0faf183c5
|
|
Use system wall-clock time for packets timestamps instead of the time
since VPP started for pcap traces.
Type: improvement
Change-Id: I716165912efe8db3a8861d5c10597dc7629d2293
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I315ef0122ccb21ccfef117a58b1dc998127618ce
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4fd7ae435514eb986543302c7e3e69e04acba8cf
|
|
Type: improvement
During synchronization, only the current actual set of entries is
loaded. If some entries are no longer present in the set being loaded
but present in VPP, they should be removed to fully syncronize.
With this change, add handlers for sync begin and end events. Begin
handlers will mark the entries as stale. End handlers will remove the
entries that are still marked as stale.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I4f7e872af3e1c9ffa6c63bcc3984ec76def1bb43
|
|
An updated ipsec script was identical to the existing ipsec_tun_protect script.
Remove the ipsec vnet script, and rename the ipsec_tun_protect to become the
default ipsec vnet script.
Type: fix
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: Ie05ca3e089b67a5b9499d83d4cb2adf1b6c6ffba
|
|
Type: improvement
Currently, if an error happens on the netlink notification socket, the
socket gets reopened. A portion of notification messages have been lost
because of this and will never arrive on the socket. VPP will be out of
sync with the kernel networking state.
With this change, synchronize VPP state and the kernel networking state
if there was an error polling or reading the notification socket.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I8cdff89b505cd227535a0acaadb6ee757204c45e
|
|
Type: refactor
check for pool expansion in the DPO allocation, just in case.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I6ba7dd66313630d3f24a51700ab4486ba43d856b
|
|
Type: improvement
For some message types, timestamps are checked on netlink message to
decide whether the message should be applied. For notification messages
timestamps are expected to be always available.
With this change, before accessing the timestamp, make sure the message
info object that carries it is not null. If it is null, pass the check.
This is to be ready to process dump replies that will not need the
timestamp check and will have the message info object set to null.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: Ic7211c0d451d72f6a5248898b3a8f8e0bca8f7aa
|
|
Type: fix
Currently, a tap interface created to be a member of a linux-cp pair has
default link state (down) and default link speed (10Mb/s). Then the
plugin monitors the link state of the paired hardware interface and if
it changes, the new link state is reflected on the tap interface. And
when the new link state is "up", the link speed is also reflected on the
tap interface.
The problem is that this scheme implies that the hardware interface's
link state is "down" at the moment of the linux-cp pair creation and
then changes. But there are cases when the link state is already "up" at
that moment. If that is the case, the link speed on the tap interface
will remain the default one until the link comes down and then comes up.
With this fix, when a linux-cp pair is created, reflect current link
state of the hardware interface being paired on the created tap
interface.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I73664d753f4daaa6d439c9ca898fb7363d21c06d
|
|
Some possible side effects for multicast routes appears to be in
lcp_router_table_add_or_lock. so ff00/8 route will be processed
for ospf purposes the right way
Ignore IPv6 kernel routes
Skip adding auto routes into FIB
Type: fix
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: I35f73d629a7fffca7f7d4547adc2549b72c2048f
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0982f0f5c8186f9ed962db49a14f35aa19f6a276
|
|
Include the user_instance in wireguard interface details.
In addition to dumping all wireguard interface details,
also allow selective dumping of just one interface.
Type: improvement
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Change-Id: Iaf1093c6ae3eb00a685f34b2e0171285b02fae2b
|