Age | Commit message (Collapse) | Author | Files | Lines |
|
Put static mappings in flow hash, drop existing hash tables used for
static mappings. Drop refcount variables and use hash table as a single
point of truth. Allow creating a static mapping conflicting with dynamic
mapping, which will take precedence after dynamic mapping is freed, so
that the existing flow can finish transferring data.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Idfde8efabc09971be38921d4b0ca5ccf4e9fe412
|
|
Add a missing return statement in case there are no parameters supplied
to 'set ip6 nd proxy' CLI to avoid calling code with uninitialised
parameters.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ie4fdb4df5d1af49471c421e5e7a6c2f885d2e8d2
|
|
Fix coverity warnings by initialising variables and removing dead code.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I0254b81020cdc3d7075df003309065438526918f
|
|
Remove non-null check for a pointer which cannot be null to avoid dead
code warning.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I5ff40a4f80db7bb0dff9928c90ff757b763902fd
|
|
This patch refactors the VPP sphinx docs
in order to make it easier to consume
for external readers as well as VPP developers.
It also makes sphinx the single source
of documentation, which simplifies maintenance
and operation.
Most important updates are:
- reformat the existing documentation as rst
- split RELEASE.md and move it into separate rst files
- remove section 'events'
- remove section 'archive'
- remove section 'related projects'
- remove section 'feature by release'
- remove section 'Various links'
- make (Configuration reference, CLI docs,
developer docs) top level items in the list
- move 'Use Cases' as part of 'About VPP'
- move 'Troubleshooting' as part of 'Getting Started'
- move test framework docs into 'Developer Documentation'
- add a 'Contributing' section for gerrit,
docs and other contributer related infos
- deprecate doxygen and test-docs targets
- redirect the "make doxygen" target to "make docs"
Type: refactor
Change-Id: I552a5645d5b7964d547f99b1336e2ac24e7c209f
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: improvement
Change-Id: I7e821cce1feae229e1be4baeed249b9cca658135
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Fix coverity warning by initialising proto variable to a dummy value.
This value is never used because consuming function uses this
parameter value only if is_addr_only flag is not set and this flag is
always set if proto value is not provided by user.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I9b5e8c08346bea1e2b460bb09e962c4b8d3b6947
|
|
Type: improvement
Change-Id: If453321785b04f9c16e8cea36fb1910efaeb2c59
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: improvement
Change-Id: Ie3b25a86b99098d2b3a21a11fc73234c8ed589d6
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Signed-off-by: Xiaoming Jiang <jiangxiaoming@outlook.com>
Change-Id: I2c77066cc9f1d3063373cc9559cc5b369906cc24
|
|
Adding a nat44 static mapping during startup on a DHCP interface leads
to a segv via this path:
- dhcp_client_acquire_address
- ip4_add_del_interface_address
- ip4_add_del_interface_address_internal
- nat44_ed_add_del_interface_address_cb
- nat44_ed_add_static_mapping
- ip4_interface_first_address
Type: fix
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Change-Id: I38dac8a096b052550f2b87b4e13a950d2cd868b0
|
|
unformat_init_vector() expects a vector, not a NULL-terminated C-string.
Type: fix
Change-Id: I20a266243f63d94b0c6fe24e25ee8346c08c8ff2
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5ecb73009c6ebb00b5d9e14bd09b4b3e80ab5601
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4f37c6601ace08ae886b08d2284b413d457e4eae
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ida114ba35227f70ddd87cad791a21f186be1cba8
|
|
struct dirent *e is freed when calling closedir(). Use ifname instead.
Type: fix
Change-Id: Icc9ca52c33ecc1dee7a9e28802149e4e3e4c8ac0
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
In vnet_sw_interface_set_flags_helper(), the variable old_flags is set
to the original value of vnet_sw_interface_t.flags for an interface. If
an error occurs during the process of bringing an interface up, old_flags
is used to restore the original value.
Before the dev class or hw class admin_up_down_function can be called,
but after modifying vnet_sw_interface_t.flags to it's new value,
old_flags is set to the value of vnet_sw_interface_t.flags a second time.
This discards the original flags that were being preserved.
As a result, if an interface is being brought up and the dev class
or hw class function fails, at the end VPP believes that interface is up.
This can cause a crash if packets are routed through the interface
and some RX/TX initialization was not completed because of the error
while bringing the interface up.
Change-Id: Ica6b6bac13c24e88c4136bf084cd392e6217e7d9
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2367e86fb22176881d118342f6e991dbc708b1f2
|
|
Type: fix
Change-Id: I54ef23a52f05cc95210a736f84b927dd69b8a6f7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
the only change to the mfib forwarding node is to set the error code, the rest is checkstyle formatting.
The traces previously showed some bogus reason:
00:04:27:325550: ip6-mfib-forward-rpf
entry 10 itf -1 flags
00:04:27:325551: ip6-drop
fib:0 adj:10 flow:0
UDP: fe80::b203:eaff:fe02:604 -> ff02::1:2
tos 0x00, flow label 0x651ed, hop limit 1, payload length 64
UDP: 546 -> 547
length 64, checksum 0xec9a
00:04:27:325551: error-drop
rx:GigabitEthernet6/0/0
00:04:27:325553: drop
ip6-input: drops due to concurrent reassemblies limit
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I294684c36edc346b4ebdd83ba66888b3b2197704
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id41e22345be3ec401813ba43ddc7d92666784eb4
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I515be7ea213250fe89a2b2be06f3636fe8f493a8
|
|
Adding flow cache support to improve outbound IPv4/IPSec SPD lookup
performance. Details about flow cache:
Mechanism:
1. First packet of a flow will undergo linear search in SPD
table. Once a policy match is found, a new entry will be added
into the flow cache. From 2nd packet onwards, the policy lookup
will happen in flow cache.
2. The flow cache is implemented using bihash without collision
handling. This will avoid the logic to age out or recycle the old
flows in flow cache. Whenever a collision occurs, old entry will
be overwritten by the new entry. Worst case is when all the 256
packets in a batch result in collision and fall back to linear
search. Average and best case will be O(1).
3. The size of flow cache is fixed and decided based on the number
of flows to be supported. The default is set to 1 million flows.
This can be made as a configurable option as a next step.
4. Whenever a SPD rule is added/deleted by the control plane, the
flow cache entries will be completely deleted (reset) in the
control plane. The assumption here is that SPD rule add/del is not
a frequent operation from control plane. Flow cache reset is done,
by putting the data plane in fall back mode, to bypass flow cache
and do linear search till the SPD rule add/delete operation is
complete. Once the rule is successfully added/deleted, the data
plane will be allowed to make use of the flow cache. The flow
cache will be reset only after flushing out the inflight packets
from all the worker cores using
vlib_worker_wait_one_loop().
Details about bihash usage:
1. A new bihash template (16_8) is added to support IPv4 5 tuple.
BIHASH_KVP_PER_PAGE and BIHASH_KVP_AT_BUCKET_LEVEL are set
to 1 in the new template. It means only one KVP is supported
per bucket.
2. Collision handling is avoided by calling
BV (clib_bihash_add_or_overwrite_stale) function.
Through the stale callback function pointer, the KVP entry
will be overwritten during collision.
3. Flow cache reset is done using
BV (clib_bihash_foreach_key_value_pair) function.
Through the callback function pointer, the KVP value is reset
to ~0ULL.
MRR performance numbers with 1 core, 1 ESP Tunnel, null-encrypt,
64B for different SPD policy matching indices:
SPD Policy index : 1 10 100 1000
Throughput : MPPS/MPPS MPPS/MPPS MPPS/MPPS KPPS/MPPS
(Baseline/Optimized)
ARM Neoverse N1 : 5.2/4.84 4.55/4.84 2.11/4.84 329.5/4.84
ARM TX2 : 2.81/2.6 2.51/2.6 1.27/2.6 176.62/2.6
INTEL SKX : 4.93/4.48 4.29/4.46 2.05/4.48 336.79/4.47
Next Steps:
Following can be made as a configurable option through startup
conf at IPSec level:
1. Enable/Disable Flow cache.
2. Bihash configuration like number of buckets and memory size.
3. Dual/Quad loop unroll can be applied around bihash to further
improve the performance.
4. The same flow cache logic can be applied for IPv6 as well as in
IPSec inbound direction. A deeper and wider flow cache using
bihash_40_8 can replace existing bihash_16_8, to make it
common for both IPv4 and IPv6 in both outbound and
inbound directions.
Following changes are made based on the review comments:
1. ON/OFF flow cache through startup conf. Default: OFF
2. Flow cache stale entry detection using epoch counter.
3. Avoid host order endianness conversion during flow cache
lookup.
4. Move IPSec startup conf to a common file.
5. Added SPD flow cache unit test case
6. Replaced bihash with vectors to implement flow cache.
7. ipsec_add_del_policy API is not mpsafe. Cleaned up
inflight packets check in control plane.
Type: improvement
Signed-off-by: mgovind <govindarajan.Mohandoss@arm.com>
Signed-off-by: Zachary Leaf <zachary.leaf@arm.com>
Tested-by: Jieqiang Wang <jieqiang.wang@arm.com>
Change-Id: I62b4d6625fbc6caf292427a5d2046aa5672b2006
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic2ba5fa234a394acb524b61573fc49f2d58c2dea
|
|
Type: fix
Fixes: 3effb4e63068 ("memif: integrate with new tx infra")
memif is recently integrated with new tx infra. But it
introduces a crash when slave disconnect from master but
interface is not deleted. Disconnect routine was missing
unregister of all tx queues. This patch fixes it.
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I81c59cc1a03561248ec8595d5e3caa54f421833e
|
|
This reverts commit 69b7599e4b061a8996205f0304232ede84cb70d4.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: If531b122ae5a9f91c2fe6eaa0da69922a91f16d3
|
|
Put static mappings in flow hash, drop existing hash tables used for
static mappings. Drop refcount variables and use hash table as a single
point of truth. Allow creating a static mapping conflicting with dynamic
mapping, which will take precedence after dynamic mapping is freed, so
that the existing flow can finish transferring data.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ieeba691d83a83887d0a0baccd5f3832f66126096
|
|
Type: fix
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I1fdefeaa4661c03e819b2f2f25762c633f9ab42c
|
|
Type: fix
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: Ia65fd2f99dfe6538411c247aeb9691c590c2e00b
|
|
Type: improvement
Change-Id: I3d8e1c7a83530bbc4b1751358ad7d034476ff13f
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
This patches fixes an issue that could cause
fib locks to underflow: if an API user deletes
a fib and quickly recreates it, the fib may not
have been actually deleted. As a result, the
lock would not be incremented on the create call
leading to the fib potentially disappearing
afterwards - or to the lock to underflow when
the fib is deleted again.
In order to keep the existing API semantics,
we use the locks with API and CLI source as flags.
This means we need to use a different counter
for the interface-related locks.
This also prevents an issue where an interface being
bound to a vrf via API and released via CLI could
mess up the lock counter.
Finally, this will help with cleaning up the
interface-related locks on interface deletion
in a later patch.
Type: fix
Change-Id: I93030a7660646d6dd179ddf27fe4e708aa11b90e
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
Type: improvement
Change-Id: Iec585880085b12b08594a0640822cd831455d594
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Attempting to create an af_xdp interface with zerocopy where the
underlying driver didn't support it would lead to a crash due to
queue creation silently failing.
Type: fix
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Change-Id: Ifd9070b8c2b3023d71120c5cf20f7e89d04e4cb3
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie0fde16fb4e41637169474628808fddf343884f3
|
|
similar behavior as here: 839dcc0fb7313638d9b8f52a9db81350dddfe461
Type: improvement
Signed-off-by: Artem Glazychev <artem.glazychev@xored.com>
Change-Id: I1b0a8f8f3dab48839e27df7065cf5f786cf0b5e9
|
|
- do not initialize resources if ikev2 is not used.
- process IKE packets only if we have profile(s) configured
Type: improvement
Change-Id: I57c95a888532eafd70989096c0555ebb1d7bef25
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
If logging is on, it will try to print the address nh. Make sure it is
not NULL.
Type: fix
Change-Id: I81c0295865901406d86e0d822a103b4d5adffe47
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Signed-off-by: Artem Glazychev <artem.glazychev@xored.com>
Change-Id: I4450b8c8b50a3be8d6a399f6a58bc0e8eb500b28
|
|
Type: improvement
Change-Id: Ia63899b82e34f179f9efa921e4630b598f2a86cb
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
This patch fixes the chacha20-poly1305 support check in ipsecmb
engine build.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: PiotrX Kleski <piotrx.kleski@intel.com>
Change-Id: I74b52a27f78a0f6a65c867dbd44a44a8f4a2ed60
|
|
Type: fix
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I415d68b39ecac546b531f6eb98bca51e7eb6f7f7
|
|
The path mtu node uses errors defined by ip fragmentation.
Type: fix
Change-Id: I1f173955919a4f555ab0309cd8201ec342a0ae92
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
IDr is optional in IKE AUTH from the initiator. In that case, the
responder is free to use any matching profile and fills the
corresponding IDr in the response.
The initiator is then free to accept or reject it.
Type: improvement
Change-Id: I07a1c64a40ed22bd41767c259406238bbbab5cf4
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Change-Id: Id0a6a9e68725ea7aa0b7da14cf54d14405a907fb
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
The IDi is not mentioned in the RFC for the responder AUTH message, and
it confuses some IKE implementations.
Type: fix
Change-Id: I2bcefa1efd315412a6f5fa592668d4e0da510264
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
https://gerrit.fd.io/r/c/vpp/+/30197 introduced SAS and inadvertently
broke ping in a variety of situations:
https://jira.fd.io/browse/VPP-1992
https://jira.fd.io/browse/VPP-1970
https://lists.fd.io/g/vpp-dev/topic/84038840
all of which seem to be rooted in situations where there's literally
nothing smarter ping can do for source address selection than
to pick the first IP on the interface. This can happen for:
1. P2P interfaces, see attempted fix: https://gerrit.fd.io/r/c/vpp/+/32801
2. Interfaces with /32 IP addresses intentionally assigned
After some discussion, this problem was partially fixed in
https://gerrit.fd.io/r/c/vpp/+/33449
Unforunately, while source selection was fixed in ping, it continued
to be broken in arp/nd. This gerrit builds on
https://gerrit.fd.io/r/c/vpp/+/33449
and fixes arp/nd.
Type: fix
Ticket: VPP-1970
Ticket: VPP-1992
Fixes: e2fe097424fb169dfe01421ff17b8ccd0c26b4a6
Change-Id: Ief60c321676a15f4f30bf4cd84d50b2f1efec432
Signed-off-by: Ed Warnicke <hagbard@gmail.com>
|
|
Enable Topdown Level 1 support on Snowridge,
enabled with standard CPU events on small core.
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I58ad09383de7464265ac1b69e683f253591e3b5e
|
|
Add a check bundle is supported before futher activation.
Enable different bundles with same name, supported on different platforms.
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I73e8bbd1e07c05ebccd9146d48a234eb598a2388
|
|
Fix peusdo events, missed populating "core" events with peusdo events.
Type: fix
Fixes: bf37bf6f7
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I569fa876f1b58540adac0b095be0ff4ade664dec
|
|
previous - b31fbc47f5fcf8234c757558d7b0285348774086
Type: fix
Signed-off-by: Artem Glazychev <artem.glazychev@xored.com>
Change-Id: I7ea2d693d3ad5bf41ece066b3511fbfa156c1e4b
|