Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: Idf79f261a7590038c1813d3996f4644e3d7e0cbe
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Add atomic swap and store macro with acquire and release ordering
respectively. Variable in question is interupt_pending variable which
is used as guard variable by input nodes to process the device queue.
Atomic Swap is used with Acquire ordering as writes or reads following
this in program order should not be reordered before the swap.
Atomic Store is used with Release ordering, as post store the node is
added to pending list.
Change-Id: I1be49e91a15c58d0bf21ff5ba1bd37d5d7d12f7a
Original-patch-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Sirshak Das <sirshak.das@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
|
|
Change-Id: I8bc3a991f0ede0605d78b51ba609fbe5889513f2
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Idd4a5f8bab5d39e5f33f5c130601175af70a20d4
Signed-off-by: Filip Varga <filip.varga@pantheon.tech>
|
|
Allows sending of unsent data in fast recovery and consolidates logic in
tcp, instead of splitting it between tcp fast retransmit and tcp output
path called by the session layer.
Change-Id: I9b12cdf2aa2ac50b9f25e46856fed037163501fe
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I209f570634636725ce8fda5f61e900a71227b888
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
Restore parts of commit d0e812f wiped out by a7564e80
The full description of the change is in d0e812f
Change-Id: I632476cb10678a725396462f90f9b0bea9e572fa
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
Change-Id: Ib15d629c5fde7849bfa3307f42659e920eb0f463
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Refactor most of the ping code to be address-family agnostic,
and add support for chained buffers (thus, sending
the payloads bigger than 2K).
Change-Id: I749c302ca2f3390e0d1f84046fc72da5cf13e3ef
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I9b5f7b264f9978e3dd97b2d1eb103b7d10ac3170
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
The failsafe driver is unique because it shares device with underlying
pci device. This confuses name generation. Without this fix, the name
is wrong and multiple devices get created with same name.
Fixes: 3901a038edf4 ("dpdk: only look at PCI information on PCI devices")
Change-Id: I13796d03baf6c76dafe3667c83bea4a1ae30c48f
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
|
|
Also reset pacer on tcp retransmit timeout
Change-Id: I5a9edee4c00d1d169248d79587a9b10437c2bd87
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Also propagate tcp worker context instead of retrieving it multiple
times.
Change-Id: I7b273b981826b37783566d0172a64cd6957f3b33
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ided6c661edc9e2035fd7b472c312e2380d3f9c0b
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Force pacing for fast retransmit to avoid bursts of retransmitted
packets.
Change-Id: I2ff42c328899b36322c4de557b1f7d853dba8fe2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I2476e3e916a42b41d1e66bfc1ec4f8c4264c1720
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
Change-Id: I716d025beb8f649060238c2bd388357943643621
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
Change-Id: Idbc7b61393c6d0e3b8ea950397a89d21b1cf3a42
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
This patch enables the use of this function for enqueuing frames to the next graph node.
Change-Id: I4003110db59870f7106e0d13942d6ff7bc54b46d
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
Reviewed-by: Sirshak Das <Sirshak.Das@arm.com>
Reviewed-by: Honnappa Nagarahalli <Honnappa.Nagarahalli@arm.com>
Reviewed-by: Steve Capper <Steve.Capper@arm.com>
|
|
Change-Id: Ib138b6e2eac47acc16e81bc88358ae7947420134
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
If sessions cannot be handled during the current dispatch loop
iteration, ensure that they are first to be handled in the next.
Change-Id: Ifc6215900f8cfd530d4886b58641189f0ccf9bb7
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I66ca0ddea872948507d078e405eb90f9f3a0e897
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Iaecf8c060e1337d8c362ad9a9be2bb9701664397
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ia68db22b917e9af1394c00e5a6b3df134bfd1568
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ia9b74761ce511d218bb5319c7c9b5e58be3e2e8a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fixes debug build crash.
Change-Id: Ia5c5da82beda5992f9e67456af9a4676b9b82722
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ibef46e068cd72415af28920b0146adf48105bf68
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I93c6b7bccd1a1ab71625ae29c99c974581186c4d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I2eafac4ce810fe53454b729d81161ec80d036db7
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I7531a64d7072d85514ca579827b6ea0e9cef6f08
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
|
|
Change-Id: I4921054b4e42bac3442d399681b21b613ce8b681
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
when the last interface is removed from l2 in the bonding group, we should
invoke ethernet_set_rx_direct to allow ip packets to go directly to
ip4-input.
Change-Id: I43b3cd64e2c119762edd0c295bb9348732adab45
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I34cc55d8292a69fb451ed0031484994f51d3537a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ie4c5cfc4c97acb321a46b4df589dc44de1b616ba
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I77af4f3a7e826ea5c1a23ee8b348faefe9f2facc
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
length in ip4 header could be 0, when the length edit is fixed
this happens if length is not specified or size is specified as, f.g., 100-100
As a result, tcp and icmp would get a negative value for checksum calculation
Change-Id: I55fa1f5e95717ea4149cb3b8c9b73caf88ae7f98
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
|
|
stream->max_packet_bytes
This length is the payload length, and will impact the ip length
when ip length is not specified. iplen = header_len + payload_len
SO, better to make it comply with max_packet_bytes
Change-Id: I8b0f7485e29fcaccae656f2d03b3b5e614300fb8
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
|
|
f.g., gtpu4/6
Change-Id: I8bb1dc5fd2fba89ff17ec069a9816bafb9684190
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
|
|
clang will emit a warning when the wrong enum type is passed to a
function whose arguments are an enum type. free bug finding...
Change-Id: I62215d8ef22c7527a31272e31f5d190e4e762e53
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
There are different flavors of vmxnet3 device, esxi server, vm fusion, vmware
workstation, and vmware player, that we need to communicate with. Each of
them also has different versions. We really need the control plane logging
to debug when things don't work as expected.
Change-Id: I53c23cf10958bfbc06abb1c252d368003563cd04
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I6e43953a6ad1bd672e69d8377d18bd9614b469d8
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Thread 1 "vpp_main" received signal SIGSEGV, Segmentation fault.
0x00007ffff670da53 in cj_dump_one_record (r=0x7ffff50f0fec)
at /home/sluong/vpp3/vpp/src/vlib/unix/cj.c:138
138 (long long unsigned int) r->data[1]);
(gdb) p *cjm
$1 = {tail = 58645908, records = 0x7fffb64646ec, num_records = 512,
enable = 1, vlib_main = 0x7ffff6953240 <vlib_global_main>}
(gdb) p /x cjm
$2 = 0x7ffff6953880
(gdb) p /x *cjm
$3 = {tail = 0x37edd94, records = 0x7fffb64646ec, num_records = 0x200,
enable = 0x1, vlib_main = 0x7ffff6953240}
(gdb)
cjm->tail is a 64 bit counter, not the total number of records. Dumping from
0 to cjm->tail can be a very large number of records which go beyond the
limit. I believe we meant to dump from 0 to index. index has been set by
this statement
index = (cjm->tail + 1) & (cjm->num_records - 1);
Change-Id: Ie1a8ba757598de9757accc1488577c15aa49726b
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I3a47c71ad3e35df47d11fed6db95019a45f3015f
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Thanks to Damjan for rewriting my previous patch into
not-to-be-deprecated soon form!
Change-Id: I595a13c44ed07d4c6d60e2aef0f0bd807a76cbba
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Some L2 traffic requires promiscuous mode enable on the interface
Change-Id: Icbb2792aaf0d9d1c51373e46ae5049ff0d986863
Signed-off-by: Steven <sluong@cisco.com>
|
|
This reverts commit 71615399e194847d7833b744caedab9b841733e5.
There seems to be an issue with ARPs when running with multiple workers.
Change-Id: Iaa68081512362945a9caf24dcb8d70fc7c5b75df
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Without pagemap access only way to do DMA to physmem is by
using IOMMU. In such case VFIO will take care for preventing
paging of such memory so we don't need to lock here.
Change-Id: Ica9c20659fba3ea3c96202eb5f7d29c43b313fa9
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
I was expecting "%4d" format string to exhibit the same behavior as
the one in C standard library, but rather than specifying _minimal_
width and expanding as necessary, it actually truncates the output.
Changing that to "%9d" should take care of pushing this surprising
difference in behavior into the domain of impossible.
Change-Id: Ia687137ca765bf9c1575af998ff11314010e81ad
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Avoid possible null pointer dereference
Change-Id: If8023edb43aaf037234f4a7b5f191cb23b09c74d
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: Ie7827b6a31968a355687d27325c0f30cab1bc890
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|