summaryrefslogtreecommitdiffstats
path: root/src
AgeCommit message (Collapse)AuthorFilesLines
2018-02-21add 'is_all_zero(x)' for NEONAdrian Oanca1-0/+24
Change-Id: I5045e0f3ac4698e820b69ad46b96763e404e6fe4 Signed-off-by: Adrian Oanca <adrian.oanca@enea.com>
2018-02-21Adj Delegates; don't store raw pointersNeale Ranns4-43/+37
... you'd think I'd have leanred by now... Change-Id: I65c54feb2ec016baa07ed96c81ab8f60277c3418 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-02-20Fix reset the vlan flags when main interface is deleted.Steve Shin1-0/+2
The dot1q_vlans & dot1ad_vlans should be reset to 0 when main interface is deleted. Otherwise, VPP will crash if the same interface index is reused without attaching the sub interface on it. Change-Id: I484d4a8892ff4241a3a32b22189746193d5f2594 Signed-off-by: Steve Shin <jonshin@cisco.com>
2018-02-20SCTP: congestion controlMarco Varlese5-184/+251
This patch addresses the requirements depicted by section 7.1.1 and 7.1.2 of the RFC 4960. Specifically, it implements the Slow-start and Congestion-avoidance policies. The patch also took care of correctly implementing some 'formatting' functions required - for instance - in packet(s) tracing. Change-Id: I68eade1b30345de3acb3ac8a653a5ef76eb6d2ac Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-02-20vppinfra: autogerate vector typedefs and basic inline functionsDamjan Marion5-379/+83
Change-Id: Ie9f611fa6a962b0937245f5cc949571ba11c5604 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-20Reset expired timer vector length after callbackDave Barach1-1/+4
Otherwise, in a "catch-up / multiple tick" case, the code will repeatedly hand previously-processed expired timer handles to the user callback. Change-Id: Idef4f242279ea41cb557bb6cff5984de02a6503d Signed-off-by: Dave Barach <dave@barachs.net>
2018-02-20vppcomm refactorKeith Burns (alagalah)1-428/+245
- server_[tx|rx]_fifo renamed to [tx|rx]_fifo - is_cut_thru etc no longer required, vpp session layer works it out - logic to flip tx/rx fifos in vppcom no longer required - allocation of memory in vppcom no longer required (if(0) at moment for testing) - clean up of some uneeded vars - fixstyle Change-Id: I266561a6e4b08edb875c98582b22616c295d5a81 Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2018-02-20vppinfra: CLIB_HAVE_VEC128 mandates SSE4.2Damjan Marion5-11/+7
Change-Id: I6511110d0472203498a4f8741781eeeeb4f90844 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-19dpdk: Fix MTU calc for NICs that support mtu<9216Nitin Saxena1-34/+66
Problem: rte_eth_dev_set_mtu() returns with failure from ThunderX NICVF DPDK PMD driver which supports MTU less than ETHERNET_MAX_PACKET_BYTES. rte_eth_dev_set_mtu() being called twice from dpdk_lib_init(): one via dpdk_device_setup() and second in dpdk_lib_init() itself. Currently dpdk_lib_init() passes vnet_hardware_interface->max_packet_bytes as an argument to rte_eth_dev_set_mtu() without consulting dev_info.max_rx_pktlen. NICs like i4oe, ixgbe can support MTU much greater than 9216 hence its not a problem for those NICS. Fix: This patch calculates dpdk_device->port_conf.rxmode.max_rx_pkt_len, vnet_hardware_interface->max_packet_bytes and MTU by consulting dev_info.max_rx_pktlen. Change-Id: If04bbfae49ee971dac0063ff1835e4a9c3087865 Signed-off-by: Nitin Saxena <nitin.saxena@cavium.com>
2018-02-19Use neutral vector code for ethernet_frame_is_taggedDamjan Marion3-41/+68
Also it removes ethernet_frame_is_any_taged implemebntation which seems to be equally costly compared to two invocations of ethernet_frame_is_tagged. Change-Id: If1c95f8267cd34b807ec07e0d675cbd0db2fdf9f Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-19virtio: add missing tx lock when running multithreadedDamjan Marion3-0/+10
Change-Id: I373f429c53c6f66ad38322addcfaccddb7761392 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-19VCL: config api prefix using env var.Dave Wallace2-21/+95
- Configure vpp api prefix using VCL_API_PREFIX environment variable. - Prepend api prefix to vpp api filename when connecting to vpp. - Fix stale vcl_cfg ptr after heap allocation. - Cleanup misleading warning messages wrt. reading the vcl config file. Change-Id: I908c9b567ff4f6f0c21ae43a4627a1a3202a3290 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-02-19Adjacency Delegate updatesNeale Ranns7-157/+287
- Register new type (for use from puglins) - Memory for delegate is provided by delegate provider Change-Id: I5ece86b1fe84e3028a5c853871476c4ba015b2eb Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-02-19VOM: acl: Some necessary fixesMohsin Kazmi3-7/+13
It: 1. changes ethertype_rule_t to hold actual objects instead of reference to them. 2. fixes acl_ethertype 'update' function 3. fixes pretty-print of acl-list-update. 4. adds l3-acl update unit test. Change-Id: Iec72212806e96bd0574b46b563de79f0744cb248 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-02-18vlib: fix pci initDamjan Marion1-2/+1
Change-Id: I2b8c1ad5c594aeca5dc44647ab8f8061362c9284 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-18fix format_hexdumpDamjan Marion1-1/+2
Change-Id: I9710be2e722d716e22d989b3417fb49d2db0848a Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-17vpp_papi: remove legacy way of calling VPP APIsKlement Sekera1-7/+0
This allows VPP to define APIs which conflict with internal function names used in vpp_papi without issues. Change-Id: I56c21814e1c11fa2aa6bcd95adb3fdeacd304e8e Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-02-17vpp_papi: reduce memory leaksKlement Sekera1-12/+16
This changes makes unused VPP objects collectable by garbage collector, allowing running all `make test` tests again instead of python crashing due to running out of memory. Change-Id: I0e271c2b3f195d9d3b64840f9f11144da0fe967d Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-02-17SCTP: 'multi-home' supportMarco Varlese6-186/+218
This patch addresses the SCTP requirement for multiple sub-connections to implement the so called 'multi-homed' scenario. Change-Id: Ibce18f216e9d2bebe318992c441bf278e16aad17 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-02-16memif: VPP-1172: Ensure memif_create reply contains sw_if_indexJon Loeliger1-1/+6
Change-Id: If5cd2e913770adac4e7320f54584da63012f925d Signed-off-by: Jon Loeliger <jdl@netgate.com>
2018-02-16Adj: VFTs for adjacency sub-blocksOle Troan5-29/+69
Change-Id: I85602b0178315023bb512babdd5b7dd4263a322d Signed-off-by: Ole Troan <ot@cisco.com>
2018-02-16Allow providers to override glean behaviourNeale Ranns9-77/+110
and update glean address on local interface MAC change Change-Id: I530826d60c7e9db2b0fa2d45754139d82c5ea807 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-02-16Minor VXLAN/GRE Tunnel Encap Optimization and CleanupJohn Lo4-37/+53
Change-Id: I62a2a6524b72115a4239fbd7dc9ac8fdc35e20ed Signed-off-by: John Lo <loj@cisco.com>
2018-02-16VPP modified some state checking logicKeith Burns (alagalah)1-72/+72
Change-Id: I5daff79a31f2db33ed55edd54ce043a61f6c6209 Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2018-02-15session: fix fifo allocation for empty connect seg-managersFlorin Coras1-1/+0
Change-Id: Ibc5b1149f3fbbe3dfe1f069ab69bfed7de660582 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-02-15Revert "Allow interface types to override glean adjacency behaivour"Ole Trøan9-95/+76
This reverts commit 8b30e471df4d42214619e1d6c50cc8298426b45f. Change-Id: I99edb236eb0a7f8ba3fba333c3481a710ebcb59c Signed-off-by: Ole Troan <ot@cisco.com>
2018-02-15Revert "Adj: VFTs for adjacency sub-blocks"Ole Trøan5-74/+29
This reverts commit a44b015aa012d3b07ed873925d47c6d5955b7dd2. Change-Id: I2d76bc0844f58e5ddf3f3a4326b86076f46e3751 Signed-off-by: Ole Troan <ot@cisco.com>
2018-02-15Adj: VFTs for adjacency sub-blocksOle Troan5-29/+74
Change-Id: I19390f87343bacea84b49fc5d08af38875fdafdd Signed-off-by: Ole Troan <ot@cisco.com>
2018-02-15VOM: Fix broken MakefileMohsin Kazmi1-1/+1
Typo mistake broken the makefile which results in missing vom headers in system. Change-Id: Ic2e5f742f0e38140559138b4aa7564f8c25b73e4 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-02-15SCTP: coverity warning fixMarco Varlese1-1/+5
Change-Id: I1f8a325eac2a9e2c825996f04026ae86259a7ddd Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-02-15Allow interface types to override glean adjacency behaivourNeale Ranns9-76/+95
update the glean adj on a local interface MAC change Change-Id: Ia5c5cde424ed0fea3431532cc5abf22b364bbab5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-02-15dpdk: add support for DPDK 18.02, deprecate 17.08Damjan Marion4-24/+0
17.11 is still default. Change-Id: I524d232579db8a59c717c5d760398b6b7f811d03 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-15Optimize GRE Tunnel and add support for ERSPAN encapJohn Lo12-358/+721
Change GRE tunnel to use the interface type where the same encap node is used as output node for all GRE tunnels, instead of having dedicated output and tx node for each tunnel. This allows for more efficient tunnel creation and deletion at scale tested at 1000's of GRE tunnels. Add support for ERSPAN encap as another tunnel type, in addition to the existing L3 and TEB types. The GRE ERSPAN encap supported is type 2 thus GRE encap need to include sequence number and GRE- ERSPAN tunnel can be created with user secified ERSPAN session ID. The GRE tunnel lookup hash key is updated to inclue tunnel type and session ID, in addition to SIP/DIP and FIB index. Thus, GRE-ERSPAN tunnel can be created, with the appropriate session ID, to be used as output interface for SPAN config to send mirrored packets. Change interface naming so that all GRE tunnels, irrespective of tunnel type, uses "greN" where N is the instance number. Removed interface reuse on tunnel creation and deletion to enable unfied tunnel interface name. Add support of user specified instance on GRE tunnel creation. Thus, N in the "greN" interface name can optionally be specified by user via CLI/API. Optimize GRE tunnel encap DPO stacking to bypass load-balance DPO node since packet output on GRE tunnel always belong to the same flow after 5-tupple hash. Change-Id: Ifa83915744a1a88045c998604777cc3583f4da52 Signed-off-by: John Lo <loj@cisco.com>
2018-02-15session: avoid session handle conflict with vclFlorin Coras6-13/+63
Change-Id: I7f5a3b8d92ef07d60315bab6e560eba49ea07249 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-02-15SCTP: fix corrupted buffers seen in output nodeMarco Varlese4-44/+62
The issue observed in the output-node was actually caused by one of the input-node pushing buffers to the output node when not required. That is the case with the parsing/handling of incoming packets like the COOKIE_ACK, HEARTBEAT_ACK, DATA, SACK which do not require a response to be sent to the other peer. In all the mentioned cases the packets (buffers) need to be consumed and dropped instead of heading to the output-node. Change-Id: I3dcbe5de1cedb2ab8b06fff4364749b525cc7ac6 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-02-15SCTP: refactoringMarco Varlese4-129/+97
This patch takes care of some refactoring, including the initialization of the timestamp to calculate the RTO, the output state-machine validation which can be enabled (disabled by default) when debugging and some clean-up of unused fields. It also addresses the requirement of Karn's algorithm when computing the RTO. Change-Id: I6b875152369bff23cad085708cec1f7e1151cfa8 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-02-14Reenable dhcp client detect when lease expiresDave Barach1-1/+50
We disable the client detect feature when we bind a DHCP address. Turn it back on again when the lease expires. Otherwise, if the DHCP server replies after an outage, we'll never see the reply. Add dhcp packet tx counters, by packet type Change-Id: Id54b05647d5d7bd8d3ab99e6584ee86d9e4ff7f9 Signed-off-by: Dave Barach <dave@barachs.net>
2018-02-14session: support local sessions and deprecate redirectsFlorin Coras23-496/+1277
Memfd backed shared memory segments can only be negotiated over sockets. For such scenarios, the existing redirect mechanism that establishes cut-through sessions does not work anymore as the two peer application do not share such a socket. This patch adds support for local sessions, as opposed to sessions backed by a transport connection, in a way that is almost transparent to the two applications by reusing the existing binary api messages. Moreover, all segment allocations are now entirely done through the segment manager valloc, so segment overlaps due to independent allocations previously required for redirects are completely avoided. The one notable characteristic of local sessions (cut-through from app perspective) notification messages is that they carry pointers to two event queues, one for each app peer, instead of one. For transport-backed sessions one of the queues can be inferred but for local session they cannot. Change-Id: Ia443fb63e2d9d8e43490275062a708f039038175 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-02-14VOM: build with plugins disabledNeale Ranns5-34/+83
Change-Id: I1384d16deb3fa38b988dd2fc98f436124e381536 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-02-14vppinfra: Remove empty fileMohsin Kazmi1-0/+0
Change-Id: I3908cc112b40d4bb52da18e7c3ac5ae0af455f87 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-02-14make-test: use api custom-dump to reduce log size.Dave Wallace1-1/+7
- Reduce log size by using "api trace custom-dump" instead of "api trace dump". - Fix custom-dump output of cli_inband_t api message to include cli command being executed. New output: DBGvpp# api trace custom-dump /tmp/test vl_api_memclnt_delete_t: index: 2 handle: 0x301d8e10 SCRIPT: memclnt_create name vpp_api_test SCRIPT: sw_interface_dump all SCRIPT: control_ping SCRIPT: exec show run Old output: DBGvpp# api trace dump /tmp/test ---------- trace 0 ----------- vl_api_memclnt_delete_t: index: 33554432 handle: 0x108e1d3000000000 ---------- trace 1 ----------- vl_api_memclnt_create_t: name: vpp_api_test input_queue: 0x808e1d3000000000 context: 0 ctx_quota: 0 ---------- trace 2 ----------- vl_api_sw_interface_dump_t: _vl_msg_id: 61 client_index: 33554432 context: 0 name_filter_valid: 0 ---------- trace 3 ----------- vl_api_control_ping_t: _vl_msg_id: 712 client_index: 33554432 context: 0 ---------- trace 4 ----------- vl_api_cli_inband_t: _vl_msg_id: 715 client_index: 33554432 context: 0 length: 9 Change-Id: If740c861649a3a59b8cc7a777c23c3cf94b8ff87 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-02-14NAT44 out2in DHCP client next nodeMatthew Smith1-8/+24
Call vnet_feature_next() for DHCP replies instead of using default ip4-lookup. This allows DHCP replies to reach an outside interface if it's configured as a DHCP client. Change-Id: Icce1cd68b21256fcd6b1fad6792c06578b0e4e36 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-02-14vxlan:remove interface recycle mechanismEyal Bari2-69/+11
vxlan interfaces no longer create tx nodes and are "cheap" to create and delete Change-Id: I7628d8ce86ec88609ed08162c94f5bc95df0d9f4 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-02-14NAT44: run NAT nodes after ACL (VPP-1160)Matus Fabian1-15/+15
NAT input features run after acl-plugin-in-ip4-fa NAT output features run after acl-plugin-out-ip4-fa Change-Id: I1e4487a0d6fdb99a90b8db640d9ad0e0eb7347a5 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-02-13vnet:remove duplicate interface function macroEyal Bari1-15/+3
Change-Id: I0ee18df69d5fe833c746d0d1e14aac14338a6e42 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-02-13BFD: make CLI consume only one line at a timeKlement Sekera1-26/+78
This makes it possible to add BFD commands to scripts executed via `exec' CLI. Change-Id: Id0ed6c09baee6f8ac9ff183d305a470f55a1f885 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-02-13VOM: ACL: Add Object Model for acl ethertypeMohsin Kazmi7-0/+747
Change-Id: I2b572ebd4b7bb26381f127912a4cc0825c04fc34 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-02-12Fix the order of RFC2685 fields in the output.Igor Mikhailov (imichail)1-2/+2
Also, output VSS info with names according to RFC6607 (3.5). Change-Id: I27a383515aca1a74dced2363a0c407b2791e5f05 Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
2018-02-12Fix DHCP client crash with worker threadsMatthew Smith3-51/+56
Crash occurring With a worker thread configured and dhcp client active on an interface. When a DHCP reply packet is received, call to ethernet_get_main() from dhcp_proxy_to_client_input() was causing a crash. Replaced with a call to vnet_get_ethernet_main(). Once that was resolved, calling dhcp_client_acquire_address() from a worker thread also caused a crash. Changed so the main thread will do the address/route configuration. Change-Id: Ib23984787102dea8cf6cfcde86188a751f15c1e1 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-02-12SCTP: fix build errors on ubuntu bionicMarco Varlese1-4/+2
Change-Id: I070771794be92fd9a6e800ca0022e52d592cd1a4 Signed-off-by: Marco Varlese <marco.varlese@suse.com>