summaryrefslogtreecommitdiffstats
path: root/src
AgeCommit message (Collapse)AuthorFilesLines
2017-03-04timing wheel: avoid queueing expired timers and caching wrong earliest ↵Andrew Yourtchenko1-2/+11
expiry value This commit addresses two issues: 1) Avoid refilling the timing wheel with stale timers in rare circumstances. The timing_wheel_advance() may call advance_cpu_time_base() to update the cpu_time_base, which is used as a starting point for 32-bit offsets of events on the timer wheel. If the timing_wheel_advance() is not called for a longer period of time, then advance_cpu_time_base() is called multiple times in a loop. advance_cpu_time_base() has two parts - the first part adjusting the base for the existing event, and the second part trying to fill with the new events from the overflow queue, which now fit into the 32-bit-sized time window off the new cpu_time_base. In doing so this second part incorrectly considers the timers which have just expired (have the time index == w->current_time_index) to still be unexpired and places them onto the wheel instead of returning them as expired. For quick successive executions of timing_wheel_advance() these events result in a relatively benign late expiry - the newly placed events expire during the next call to timing_wheel_advance(). If the successive executions of timing_wheel_advance() result in multiple invocations of advance_cpu_time_base(), the Nth iteration of it may place a stale event on the timer wheel if the event time index equals to the current time index (which has been previously purged), while the N+1th iteration of it will trigger an assert violation on this stale event, resulting in a reboot. As part of the testing, two test runs were done before and after the change. Each of the test runs consisted of the following command: for i in `seq 1 300`; do ./test_timing_wheel validate events 10000 synthetic-time verbose seed $i iter 10000 wait-time 2 max-time 300; done The test runs completed identically, however they uncovered the following assert failure: vpp/src/vppinfra/test_timing_wheel.c:225 (test_timing_wheel_main) assertion `min_next_time[0] <= tm->events[i]' fails This assert is the second issue covered by this commit: 2) Inserting a new element may result in incorrect cached expiry value The w->cached_min_cpu_time_on_wheel is being updated within timing_wheel_advance() every time the elements are expired. However, it is not touched if the new elements are inserted. Assuming current time is "T" and the cached min cpu time is "T+X", if a new element is being inserted whose expiry time is "T+Y", and Y is such that Y < X, then the value w->cached_min_cpu_time_on_wheel becomes incorrect until the next expiry event, during which it is updated. The test catches this transient condition which results in the asserts seen in the runs above. The solution is to update the w->cached_min_cpu_time_on_wheel within timing_wheel_insert_helper() as necessary. Change-Id: I56a65a9a11cc2a1e0b36937a9c6d5ad10233a731 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-03-03Implement a loopback instance allocation scheme.Jon Loeliger7-19/+241
To support creating loopback interfaces with a specific instance number, a new CREATE_LOOPBACK_INSTANCE API call with flag is_specified and value user_instance is introduced. Presumably the existing CREATE_LOOPBACK API message will be obsoleted and revmoved. The VAT cli commands can now mention and format the new field as 'instance %d' data. If no instance number is named, the old call CREATE_LOOPBACK is used to maintain backward compatibility. However, if the instance is named, the new CREATE_LOOPBACK_INSTANCE message will be used. Both the dynamically allocated and user-requested instance number are tracked in a bitvector. If is_specified is 0, the next free instance will be used.. A request for a specific instance number will be granted if it is available. On error, the value ~0 is returned. Change-Id: I849815563a5da736dcd6bccd262ef49b963f6643 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-03-03Fixed PLUGIN_DISABLE bugPablo Camarillo1-1/+1
Change-Id: I7a0ff25a8f74e6eda3a44f2cd7d2e022683accd9 Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
2017-03-03Clean up VXLAN api message handler registration issuesJohn Lo1-94/+0
Remove the duplcate VXLAN related API handlers from api.c and keep the proper ones in ./src/vnet/vxlan/vxlan_api.c. Change-Id: I3b17e17d735bb453d080243bfa2783ce0de64885 Signed-off-by: John Lo <loj@cisco.com>
2017-03-03VPP-651: Ensure sw_if_index to node mapping for L2 output path is only done ↵Andrew Yourtchenko10-88/+53
via l2output_main.next_nodes Before this commit, several output features that happen to be the last in the list of features to be executed, send the packets directly to <interfaceName>-output. To do this, they use l2_output_dispatch, which builds a list of sw_if_index to next index mappings. When interfaces are deleted and the new interfaces are created, these mappings become stale, and cause the packets being sent to wrong interface output nodes. This patch (thanks John Lo for the brilliant idea!) adds a feature node "output", whose sole purpose is dispatching the packets to the correct interface output nodes. To do that, it uses the l2output_main.next_nodes, which is already taken care of for the case of the sw_if_index reuse, so this makes the dependent features all work correctly. Since this changes the packet path, for the features that were always the last ones it has triggered a side problem of the output feat_next_node_index not being properly initalized. These two users are l2-output-classify node and the output nodes belonging to the acl-plugin. For the first one the less invasive fix is just to initialize that field. For the acl-plugin nodes, rewrite the affected part of the code to use feat_bitmap_get_next_node_index since this is essentially what the conditional in l2_output_dispatch does, and fix the compiler warnings generated. This fix was first made in stable/1701 under commit e7dcee4027854b0ad076101471afdfff67eb9011. Change-Id: I32e876ab1e1d498cf0854c19c6318dcf59a93805 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-03-03Improve api trace replay consistency checkingDave Barach3-2/+41
Change-Id: I2c4b9646d53e4c008ccbe6d09c6a683c776c1f60 Signed-off-by: Dave Barach <dave@barachs.net>
2017-03-03IPv6 RA improvementsNeale Ranns3-157/+149
1) tests for RA options 2) memleaks deleteing a ip6_radv_info_t 3) MLD prefix code refactoring Change-Id: I34db103994bd8fbdbbec50b202d72770dd145681 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-03Changing the IP table for an interface is an error if the interface already ↵Neale Ranns7-66/+110
has an address configured (VPP-601) Change-Id: I311fc264f73dd3b2b3ce9d7d1c33cd0515b36c4a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-03python API: work towards python/vpp api separationKlement Sekera1-1/+30
This change improves vpp_papi behaviour by introducing alternate way of calling vpp APIs. The common code is the same: vpp = VPP(...) vpp.connect(...) Calling VPP API is different, instead of deprecated: vpp.show_version() # deprecated one should write vpp.api.show_version() this allows VPP messages like "connect" and "disconnect" to be used, once the old API is dropped (in 17.07). Also part of this patch is a check for name conflict, to prevent VPP object overwriting its own functionality with generated code based on json files. Change-Id: I22e573b6a45f8b2a1f0340c5c2597c194fe42ca4 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-03-02VPP-608: fix coverity warning in vppapigenDave Barach1-2/+2
Change-Id: Ic26216bb03d941c1625a61c1c3340d2d70d84bd0 Signed-off-by: Dave Barach <dave@barachs.net>
2017-03-02Fix create_vlan_subif API using sw_if_index as hw_if_indexJohn Lo1-3/+8
Also added check for bounded interface. Change-Id: I44b981d5b6fbe360e0b95c326f3f8b0e6c715468 Signed-off-by: John Lo <loj@cisco.com>
2017-03-02Clean up binary api message handler registration issuesDave Barach14-397/+81
Removed a fair number of "BUG" message handlers, due to conflicts with actual message handlers in api_format.c. Vpp itself had no business receiving certain messages, up to the point where we started building in relevant code from vpp_api_test. Eliminated all but one duplicate registration complaint. That one needs attention from the vxlan team since the duplicated handlers have diverged. Change-Id: Iafce5429d2f906270643b4ea5f0130e20beb4d1d Signed-off-by: Dave Barach <dave@barachs.net>
2017-03-02bridge domain: fix members reordered when removingEyal Bari1-1/+1
since adding support for multicast vxlan flooding (flood class tunnel master) correct flood functionality depends on the order of the memebers vector solved by using vec_delete instead of vec_del1 which swaps members before deleting the last element Change-Id: I234f218d49172b4142c567db9699a5cb274e4a66 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-03-02SNAT: user's dump and session dump of a certain snat user.magalik6-3/+288
Change-Id: If75a35dbdcb43c1ce0128b8649f2ca3970d3fff5 Signed-off-by: Martin <magalik@cisco.com>
2017-03-02Remove the unused VRF ID parameter from the IP neighbour Add/Del APINeale Ranns3-8/+0
Change-Id: Icf0d72f6af1f98c86f78e586c354515ac69804aa Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-02Determine pkt type in dpdk-input node using ethertype only (VPP-647)John Lo1-52/+22
Remove reliance on DPDK driver provided mbuf packet type in dpdk-input node as some NIC driver provide misleading information. Now using ethertype from the packet itself to determine packet type for next node. Change-Id: Ie7b514a984f9382c29f1a1e3eb423d68f817c064 Signed-off-by: John Lo <loj@cisco.com>
2017-03-02Fix LISP Coverity warningFlorin Coras1-1/+1
Change-Id: Id1c3832609859ed004bacba0ced0d07dafd6c409 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-03-02VPP-648: CLI Memory leak with invalid parameterBilly McFall3-29/+88
After VPP-635 was merged, did one more pass. While the code was waiting to be merged, a few changes were merged to master with the same issue. This is a few additional changes addressing the same issue. See VPP-635. Change-Id: I7abeac5c260c1e2e9d9d318fd1aae24cd6932efc Signed-off-by: Billy McFall <bmcfall@redhat.com>
2017-03-02BFD: command line interfaceKlement Sekera11-168/+1081
Implement command line interface to the BFD binary APIs. Add corresponding unit tests. Change-Id: Ia0542d0bc4c8d78e6f7b777a08fd94ebfe4d524f Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-03-01dpdk: be a pluginDamjan Marion43-1585/+838
Change-Id: I238258cdeb77035adc5e88903d824593d0a1da90 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-01vppinfra: fix issue when copying 16 bytes with clib_memcpyDamjan Marion2-0/+10
Current code wos copying same data twice when length is 16. Change-Id: I8d935b32f61672aaea9789c097a5083ae8f78cdd Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-01VPP-598: tcp stack initial commitDave Barach94-512/+17375
Change-Id: I49e5ce0aae6e4ff634024387ceaf7dbc432a0351 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-03-01Fix buffer template copyDave Barach2-5/+30
Change-Id: If451c9cb68719fc816999b0330b9be3a0169176a Signed-off-by: Dave Barach <dave@barachs.net>
2017-03-01devices: vnet_get_aggregate_rx_packets should not be dpdk specificDamjan Marion10-53/+59
Change-Id: I1152db4b7d1602653d7d8b2c6cb28cf5c526c4ca Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-28dpdk: retire support for dpdk 16.07Damjan Marion5-58/+3
Change-Id: I8585552c026415340fe9fd0458cb8450da3c4ae2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-28Clear L2 output config on interface mode change to L3 (VPP-651)John Lo1-4/+11
With VPP-651, the L2 output config with L2-tag rewrite was not cleared when a sub-interface is deleted. Subsequently, when the same sw_if_index was reused for another interface, the L2 output config with L2-tag rewrite remained on the new interface. On deleting a (sub-)interface which is in L2 mode, it will be changed to L3 mode first to clear any L2 config. The L2 to L3 mode change path did address L2 input config cleanup. It is now fixed to also clear L2 output config. Change-Id: I3352a89d92e1b27340a5adcf75bbaa01a5050c29 Signed-off-by: John Lo <loj@cisco.com>
2017-02-28vlib: add buffer cloning supportDamjan Marion8-265/+256
Change-Id: I50070611af15b2b4cc29664a8bee4f821ac3c835 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-28Fix warning in generated codeDave Barach1-4/+14
Change-Id: Ie56fca84a8a0ed77ee480e8078e6e9b3f4cef105 Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-28Trace plugin binary API message range allocationDave Barach2-8/+89
Change-Id: I544a5d2906548607b69f999567b92f802fddddbb Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-27BFD: disable debug printsKlement Sekera1-1/+1
Change-Id: I356581f4bdf47b9610b9e50f4f8db9a1510872a7 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-27vlib: add VLIB_BUFFER_EXT_HDR_VALID flagDamjan Marion4-5/+4
Change-Id: If56c66dd12eded1cc997087de5fd1b975766c4e2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-27Add GPE CLI/API for setting encap modeFilip Tehlar8-4/+319
Change-Id: Id89e23fb5d275572b2356c073dfa0f55719e1a76 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-02-27fix:vxlan mcast adj - added as ucast dpo adjEyal Bari1-1/+1
Change-Id: Ic2447313075cd46f265202dffaaac894f48ddf6d Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-02-26Load plugins in alphabetical orderDave Barach1-9/+55
API traces contain absolute message numbers. Loading plugins in directory (vs. alphabetical) order makes trace replay fragile. Change-Id: I46b3a3b6a9843a383d42269fca0cf5a789486eaf Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-26BFD: echo functionKlement Sekera8-318/+864
Change-Id: Ib1e301d62b687d4e42434239e7cd412065c28da0 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-25Add NSH to GPE decap pathFlorin Coras5-20/+56
Change-Id: I97681322fa9ca81736100b4d32eab84868886c7b Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-02-25MFIB: changes to improve route add/delete performanceNeale Ranns3-7/+12
Change-Id: I063d85200d12b09545ae1c373c7fc69112ae3b34 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-24FIB: 1) fix pool realloc during prefix export. 2) don't walk off the end of ↵Neale Ranns3-7/+31
the path-extension vector Change-Id: I8bd8f6917ace089edb1f65bd017b478ee198c03f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-24VPP-650: handle buffer failure in vlib_buffer_copy(...)Dave Barach4-10/+63
Change-Id: I6aac48d780fcd935818221044eae50067f225175 Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-24Fixed QAT device binding and device unbinding when vpp package is removedRadu Nicolau1-1/+1
Change-Id: I35ad6a42093cad0945df1df09a39c63c4560dce6 Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
2017-02-24MFIB memory leak. free the per-source interface hashNeale Ranns3-6/+3
Change-Id: I0ccb337eb0ed50ccc64193533cd816f6e36e6db5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-24VPP-279: Document changes for vnet/vnet/devicesBilly McFall2-100/+617
Add doxygen documentation for dpdk CLI commands. Outside of adding documentation to the CLI Commands, modified the CLI code as follows: * The "set dpdk interface placement" command allows the user to move interface/queues to a different thread. But there is only a subset of threads that are valid. Updated the "show dpdk interface placement" command to display all valid threads, even if all interface/queues have been moved off. Updated the "show dpdk interface hqos placement" the same way. * There is a command to modify the Subport attributes, but no way to display the changes. Added a "Subport" section to the "show dpdk interface hqos" command. * Reworked the "set dpdk interface hqos subport" command. - The current implementation had a local rte_sched_subport_params structure and initialized it to default values, then overwrote with what was input. The side effect of this is that if all the current data is non-default, and a new command is entered with just one attribute, all the remaining attrbutes are getting set back to default under the cover. Very confusing for the user. Updated the code to read the current value and overwrite what has changed. - DPDK does not have a read subport data, so no way query the current applied values. The set command was not updating the local copy that is created at init. Modified the code to store the updated values if the DPDK apply function was successful. - Several functions repeated the same code to get a pointer to the local HQoS data. Added a utility function.get_hqos(..), to perform this action. Did not port other code to use new function. * The "set dpdk interface hqos pktfield" allows the user to set the packet fields required for classifiying the incoming packet. The classification is across three fields (subport, pipe, tc). The command was using 0,1,2 to represent these three fields, but had no explanation regarding these magic numbers. Updated the command to take the three tokens (subport, pipe, tc) for more clarity. For legacy sake, still allow 0,1,2 to be entered. Also updated the "show dpdk interface hqos" command to show these tokens. * The "set dpdk interface hqos tctbl" maps an interface and value 0-63 to a traffic class and queue. The "show dpdk interface hqos" command showed the internal DPDK magic number for traffic class and queue. Updated the show command to display what was input instead of the magic number. * The "show dpdk hqos queue" command always returns zeros by default because RTE_SCHED_COLLECT_STATS is not defined in DPDK. Took me a while to figure out why I wasn't getting values returned. So returned an error message if RTE_SCHED_COLLECT_STATS is not defined instead of zeros. Change-Id: I22b640d668245839ee977ef3602175c61d91d24c Signed-off-by: Billy McFall <bmcfall@redhat.com>
2017-02-23Fix vpp built-in version of api_unformat_sw_if_index(...)Dave Barach3-19/+36
Change-Id: I103fe19a1ecbaf3746ec6b957fa1010458cc9fae Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-22Clean up "binary-api" help string, arg parse bugsDave Barach2-2/+8
Change-Id: I12311be8ebd376b8aeac25364d010d70a85c7874 Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-22Fix LISP and ONE crc marcosFilip Tehlar3-11/+26
Change-Id: Icd0dba04d8929456228136d1f25c459bffcc6a7a Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-02-22Support multiple plugin build in the sample-pluginAnlu Yan3-18/+52
This follows the setup in the src/plugins directory, and allows multiple plugin build independent of the main vpp source tree. Change-Id: I9e20f4087d72ad89c6dc3f505bace4628385a40e Signed-off-by: Anlu Yan <ayan@cisco.com>
2017-02-22VPP-635: CLI Memory leak with invalid parameterBilly McFall36-572/+1472
In the CLI parsing, below is a common pattern: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) { if (unformat (line_input, "x")) x = 1; : else return clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); } unformat_free (line_input); The 'else' returns if an unknown string is encountered. There a memory leak because the 'unformat_free(line_input)' is not called. There is a large number of instances of this pattern. Replaced the previous pattern with: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) { if (unformat (line_input, "x")) x = 1; : else { error = clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); goto done: } } /* ...Remaining code... */ done: unformat_free (line_input); return error; } In multiple files, 'unformat_free (line_input);' was never called, so there was a memory leak whether an invalid string was entered or not. Also, there were multiple instance where: error = clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); used 'input' as the last parameter instead of 'line_input'. The result is that output did not contain the substring in error, instead just an empty string. Fixed all of those as well. There are a lot of file, and very mind numbing work, so tried to keep it to a pattern to avoid mistakes. Change-Id: I8902f0c32a47dd7fb3bb3471a89818571702f1d2 Signed-off-by: Billy McFall <bmcfall@redhat.com> Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-22jvpp: remove unnecessary msg_id_base cachingMarek Gradzki11-178/+90
Jvpp code uses CRCs to obtain msg IDs. Checking api_main_t.msg_index_by_name_and_crc is enough to detect API mismatch. Calling vl_client_get_first_plugin_msg_id is not needed. Also fixes VPP-627. Change-Id: Ie3085dfa458795fa11f17615ac94e76197a1c8cd Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2017-02-16Consolidate DHCP v4 and V6 implementation. No functional change intendedNeale Ranns15-959/+850
The DHCP proxy and VSS information maintained by VPP is the same for v4 and v6, so we can manage this state using the same code. Packet handling is cleary different, so this is kept separate. Change-Id: I10f10cc1f7f19debcd4c4b099c6de64e56bb0c69 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-22fix trace frame-queue unformat of indexMatus Fabian1-1/+1
Change-Id: Id891af5ef3c4afe877282b34cd03fc43886940a3 Signed-off-by: Matus Fabian <matfabia@cisco.com>