Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I6bb6c6be62f98ac9a059469c81a5f4476b96e96e
|
|
Type: docs
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I75d1efc503135bdc224f563b4e02b449904bfa08
|
|
Type: fix
Change-Id: Ia3dacd2628591f7ba9710e8e4d68df97ae21935c
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: fix
Since the connection is closed, also mark the session as closed.
Change-Id: Ica3849c3ff12fa7a65ba64e563a60d6c94f5ceca
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: refactor
Change-Id: I204f3f8eebc5f5d5a377e91262f91c615fd00168
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Signed-off-by: Aleksander Djuric <aleksander.djuric@gmail.com>
Change-Id: I2fe36e2e4e8ce2906a6573301c7fca3cbab571c3
|
|
Type: fix
Signed-off-by: Aleksander Djuric <aleksander.djuric@gmail.com>
Change-Id: I186286b8959ae138528a5171c22d3e1b00f46baf
Signed-off-by: Aleksander Djuric <aleksander.djuric@gmail.com>
|
|
This adds support to compile the bnxt PMD that supports Broadcom's
10/25/40/50/100/200 Gbps NICs. Tested with modified DPDK driver on
x86_64 and aarch64 targets that is pending upstream acceptance, but
should compile just fine today.
Type: feature
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Change-Id: I735a991c4cae4fa77e5605094facea54b781a1db
|
|
Type: refactor
Change-Id: I34306c1206b2bf5f521be6c6b78074ccf9259a08
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: I7cba9f911abe1ae82d8381a48f65e81b615ede76
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: fix
all other uses of the fib_entry_get_preifx in the code base don't pass
the prefix into recursive functions.
Change-Id: Ic1c56acd406a733b215ee2fd98b6bed58b490a4f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Glibc 2.28 now provides fcntl64 which is used instead of fcntl
by defining fcntl as fcntl64 in fcntl.h
Type: fix
Change-Id: I87fedfbf3e0d241aafdc920e90f824d71353e0e6
Signed-off-by: Carl Smith <carl.smith@alliedtelesis.co.nz>
|
|
Apparently some dhcp servers care about it. Also fixed the unit-test.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: If0af70d624f4122b0339f20f84be047053776fe8
|
|
Type: fix
Change-Id: I604e4dd2b29962bfcd8e950a0074637dab53c79e
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Fixes: 8389fb9
Change-Id: Ie159eb444b28b36a7af86049b80fba4e49be93cb
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Do not overflow ops_handlers vector.
Type: fix
Change-Id: I8d5e7fb8125a7bd87ecfe6f4f1390fb9f43dad8f
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Allows for comparison without needing str(MACAddress())
Traceback (most recent call last):
File "/vpp/test/test_ip6.py", line 1074, in test_icmpv6_echo
self.assertEqual(ether.dst, self.pg0.remote_mac)
AssertionError: '02:01:00:00:ff:02' != MACAddress(02:01:00:00:ff:02)
Type: feature
Change-Id: Ife1cbfc74d477695d15b33a19da7dd2fa241a348
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Change-Id: I33dc4cf7b6c69f74c7bf4971ce59442678b878ef
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: refactor
Change-Id: I25f1cc3969c6a6ec1384079dc437537acd2ec152
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This fix was first made in
commit fdea5c6a00b74971dbb1b7ec4e25839a871006ca
but was subsequently lost in
commit 053204ab039d34a990ff0e14c32ce3b294fcce0e
Added unit test for setting VTR on a non-sub-interface to
help ensure no future regressions of this ability.
Type: fix
Change-Id: I71ce2684fb72383741455829ae2d397ea2e95eae
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
We discard unwanted events until we get an ACCEPTED.
But if we are non-blocking we need to check the queue
length every time and EAGAIN if empty before waiting.
Type: fix
Signed-off-by: Carl Smith <carl.smith@alliedtelesis.co.nz>
Change-Id: Ie0c7e5cb00f0d37d2e1534f8bb384221ff56f2e3
|
|
Type: refactor
Change-Id: I2c6b59013bfd21136a2955442c779685f951932b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
If a client application is built against 19.08, it can dump the "manifest" of API signatures.
Either the all APIs (--dump) or the APIs it is interested in (--dumpfiltered).
When the developers of said client application wants to verify that it works with VPP 20.01.
It can connect to VPP and --validate the old mainfest file, and will be told a list of
messages (both request and reply) that has changed.
import argparse
from vpp_papi import VPP
import sys
import argparse
parser = argparse.ArgumentParser()
group = parser.add_mutually_exclusive_group()
group.add_argument("--dump", action="store_true")
group.add_argument("--dumpfiltered", action="store_true")
group.add_argument("--validate", action="store_true")
args = parser.parse_args()
vpp = VPP(use_socket=True)
vpp.connect(name='apimanifest')
if args.validate:
# Verify manifest
message_table = eval(sys.stdin.read())
missing = vpp.validate_message_table(message_table)
print ('Changed message signatures: {}'.format(missing))
elif args.dump:
# Output manifest to stdout
print('{}'.format(vpp.dump_message_table()))
elif args.dumpfiltered:
# Output manifest to stdout
filterlist = eval(sys.stdin.read())
print('{}'.format(vpp.dump_message_table_filtered(filterlist)))
vpp.disconnect()
Type: feature
Change-Id: I7e708b36f599ed88e4864970c8593cc2fe5fbf61
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Having session enable in config file wasn't
working for multiple workers
Type: fix
Change-Id: Ib29ba540a6e1d714e7e470f4c7518e3d266fe7ca
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Change-Id: Ib5c9de9c9053b8339f514ff648a75c3b56b55215
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: Iea7d73a304236b525b95bdad3bfdb41e711f8cdb
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
opt_data is defined as a array, while in some code, e.g., function
vnet_crypto_get_op_type, it's used as vec.
vec api is not applicable to static arraies.
src/vnet/crypto/crypto.h:234:70: error: address of array 'cm->opt_data' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
vnet_crypto_op_data_t *od = ({ do { if ((0 > 0) && ! ((id) < ((cm->opt_data) ? (((vec_header_t *) (cm->opt_data) - 1)->len) : 0)))
Type: fix
Change-Id: I0b6754406e4216ca975bc1da4b5d4ce293a9bb45
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
|
|
Type: feature
Also make sure that size for dlmalloc allocated private segments is
accurate.
Change-Id: I6ec81ff99a13dd29b9664d768835a68019f0c96c
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Set vm->check_frame_queues after actually enqueuing a frame. Under
obscure circumstances, the code managed to set check_frame_queues so
far in advance that 100 dispatch cycles could elapse before the frame
enqueue succeeded. That resulted in permanent lack of queue service.
Type: fix
Ticket: VPP-1734
Fixes: 18191
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: If2d398202b4ba2b96581d25e8142daef3f74c9e5
|
|
Type: feature
- retransmit first unacked segment if newer retransmitted packets
are acked
- avoid spurious retransmits if recovery ends with sacked bytes
Change-Id: Ic1b56d22e025822edb7609afb136e47440ea6032
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
This provides a functional interface to IP fragmentation.
Allowing external features to fragment. Supports
arbitrary encap size, for e.g. MPLS or inner fragmentation
of tunnels.
This also removed dual loop in MAP that was fundamentally broken.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ia89ecec8ee3cbe2416edbe87630fdb714898c2a8
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Autoconfigure router advertisements for delegated prefixes.
Clean up a longstanding issue. If vpp receives a dhcpv6 renew reply,
do NOT reset per-delegated-prefix timers. That prevented vpp from
sending a solicit to renew the delegation on time. That, in turn
caused the RA code to send advertisements with valid_time =
preferred_time = 0. That causes almost any downstream client to throw
away its delegated address.
Miscellaneous changes
o src/vnet/ip/ip6_neighbor.c - always memset elements allocated from pools
to zero. DGMS.
o Remove debug spew from the ipv6 connection-tracker plugin
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I428feccdc47efdc413898600e0d62916928a6eb7
|
|
Type: feature
Change-Id: I700d999771d837604dd0571741f4f0bcbec82403
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
Type: fix
Change-Id: I7416e827fbc5c63d082273656441c81dd6246d8a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: Ib6a8f5ca597389700e5746f089a5cec7eee65ab5
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Keep trying even if the interface in question is not "admin-up,
link-up." In real life, it's normal for link autonegotiation to take a
good fraction of a second. The driver layer takes care of packets sent
to an interface which can't transmit at the moment.
Renew address leases at the preferred renewal time, not at the
expiration time.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I68ec1c52cc1f4a8aa256185820748b845e92f7c1
|
|
Type: fix
Fixes: Ide0bb276659119c59bdbbc8b8155e37562a648b8
Change-Id: I4db18508910d5fe5f5df4d902e15cf19b10c0621
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: make
Change-Id: If822c85d6ff26982516ea1d597ca81aa84773b2b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: I694db40c3a0361852d01b84c7a45e32e39e9f4af
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
When creating rdma interface without specifying a name, we need to
generate one instead of NULL.
Type: fix
Change-Id: If41870691dec47e8e673d48ac4b4ddffd2385a03
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
APIs for dedicated IPSec tunnels will remain in this release and are
used to programme the IPIP tunnel protect. APIs will be removed in a
future release.
see:
https://wiki.fd.io/view/VPP/IPSec
Type: feature
Change-Id: I0f01f597946fdd15dfa5cae3643104d5a9c83089
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Use sid returned by vcl_session_connected_handler instead of trying to
infer it from vpp session handle.
Change-Id: Ic0fbb90ec2bd851b435fc3f2a34265ac9a8ab29f
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: feature
Change-Id: I402f4c88dee70fbb0b3b61dc4e0a4034d24d8b56
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: I38ee9efd23774cce7790565825527cca9ba6f200
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: Ia18632c8fe22bdcfdf3cb48a4234f8703a7ac1d7
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: style
Change-Id: If28a4959c1d60ab1caf22dbc8b72d9adf7060bd4
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Raw('\xaf) and Raw(b'\xaf) are two quite different things in python 2 versus 3.
In most cases this didn't make a difference, apart from those cases where length
of payload actually mattered.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I3cba5c1486e436a3ca8aa10a7b393da75aa9f6b9
|
|
This patch improves the GCM encrypt and decrypt performance using
the dedicated API provided by intel-ipsec-mb library. This helps
remove the overhead caused by the JOB API.
Type: feature
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: I00c9ab3ed9f2660093fb2584feb8bca4979acee8
|
|
Type: feature
Change-Id: I5bbf37969c9c51e40a013d1fc3ab966838eeb80d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- Fix AAD initialization. With use-esn the aad data consists of the SPI
and the 64-bit sequence number in big-endian order. Fix the u32 swapped
code.
- Remove salt-reinitialization. The GCM code seems inspired by the GCM
RFCs recommendations on IKE keydata and how to produce a salt
value (create an extra 4 octets of keying material). This is not IKE
code though and the SA already holds the configured salt value which
this code is blowing away. Use the configured value instead.
Type: fix
Change-Id: I5e75518aa7c1d91037bb24b2a40fe4fc90bdfdb0
Signed-off-by: Christian Hopps <chopps@labn.net>
|