Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I25043da84b2f2b3f37024ecfedac535df3004ea5
|
|
Packet tracing performance doesn't justify inlining
vlib_add_trace(...) over 500 times.
It makes a 15% text-segment size difference in a representative use-case:
Inline:
$ size .../vnet_skx.dir/ipsec/ipsec_input.c.o
text data bss dec hex filename
6831 80 0 6911 1aff .../vnet_skx.dir/ipsec/ipsec_input.c.o
Not inline:
$ size .../vnet_skx.dir/ipsec/ipsec_input.c.o
text data bss dec hex filename
5776 80 0 5856 16e0 .../vnet_skx.dir/ipsec/ipsec_input.c.o
Retain the original code as vlib_add_trace_inline, instantiate once as
vlib_add_trace.
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Iaf431dbf00c4aad03663d86f9dd1322e84d03962
|
|
Fix a nit warning: we're not likely to create a vlib process with more
than 4gb of stack.
Type: fix
Ticket: VPP-1888
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I8bc7f64287c2802b0c286ce3d04443ac723a9a33
|
|
VXLAN uses csum_offload for IPv6 packets.
But without gso node we have csum calculated only for inner
packet.
This patch adds support for outer header csum calculation.
Checksum for inner packet should be calculated before
interface-output node (for example in vxlan node).
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Signed-off-by: Vladimir Isaev <visaev@netgate.com>
Change-Id: Ica68429ede4426293769207cd83c791ebe72fe56
|
|
Replace whitespread (mis)use of snat_session_key_t by proper function
arguments where applicable and inline functions to calculate hash keys
instead of using structs for that. Make all hash tables use same network
byte order port so that there is no longer a discrepancy between static
mappings using host byte order while in2out/out2in tables using network
byte order.
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I80786d2f947c67824c101a13bb608f1fe1080f34
|
|
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I8fbc4baefecf512573126c5085ed7a6e2e360fbe
|
|
Add dpo_pool_barrier_sync/release, use them to clean up
thread-unsafe pool expansion cases.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I09299124a25f8d541e3bb4b75375568990e9b911
|
|
adj_alloc (...) is not thread safe when the adj pool or combined
counter vectors expand.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I55710de6ecc083b7434e11798659cca9250c9131
|
|
load_balance_alloc_i(...) is not thread safe when the
load_balance_pool or combined counter vectors expand.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I7f295ed77350d1df0434d5ff461eedafe79131de
|
|
Type: fix
Change-Id: I0e87021b11009a955f5839bdb68af897145816c1
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Change-Id: I3198461f3dfc13cd3cedf2b8611dc80bb6f959c8
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: improvement
Change-Id: I3defde103ab245404de42d2be7abcb2c43d49a60
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Ticket: VPP-1887
Type: fix
Change-Id: I341ac7b455926a106d736f4de6771aae655db82e
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ife437f959e29d3de88bd7ee77221ada86fb03e80
|
|
- add ability to pass data together with interrupt
- avoid locking for local interrupts (same thread)
Type: improvement
Change-Id: I73a2ab2e716bb887a1f02c87788ae83e329f9b40
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I1110e425859a4f1f07952c91b50f263cb7323836
|
|
Type: improvement
Change-Id: I99c2383dd0d30efd1837f3d10ff2e4cf3a784283
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
make sure we don't pass a 0 (zero) to log2.
Type: fix
Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
Change-Id: Ib3386ad4686835d3836f48294cee4058e897847a
|
|
Otherwise, the out2in path will discard return-path traffic with
probability 1.0.
Type: fix
Fixes: gerrit 23963 / f126e746fc01c75bc99329d10ce9127b26b23814
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I621ed99329c04ef358035747dde599c0016b58f5
|
|
Type: fix
Ticket: VPP-1885
Change-Id: I474fffd4d36f439a19d475a8cb20171ca88274ec
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
This reverts commit 9121c415a91904be50071ec55143d9c89b2f1b91.
Reason for revert: causes deadlock with multiple worker threads
Type: fix
Change-Id: Icf3d6d343d99d887abacbaa03acbf04d4628514e
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Ticket: VPP-1885
Fixes: 58db6e1
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I6431e49b315e09490fed8fd70ac53872836c6a09
|
|
Type: fix
Ticket: VPP-1886
Fixes: 58db6e1
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic40018a756e57bfec05ffbc5e30d18f4feb315db
|
|
Type: fix
the hash walk does not give the same guarantees as the bihash so
walk in a safe manner.
Change-Id: Idfe48c3a84ab3a341d887f7d196bc81ba34ae8b0
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: Ic3fc488521636f7f7c9402a20db45fdb599adaae
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: docs
Signed-off-by: John DeNisco <jdenisco@cisco.com>
Change-Id: Iba106d33d34766b91e46980e7237fbdfc3710b8b
|
|
Use %U and unformat_udp_port instead of %u for unformat() call for
u16 collector_port number in set_ipfix_exporter_command_fn() to
avoid corruption of other variables which can happen if unformat()
with %u is used with a 16-bit variable. This avoids crash due to
corrupted fib_index value.
Type: fix
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
Change-Id: Id54273fcc458a7f9c5aa4025aa91711f160c1c1a
|
|
Type: style
Change-Id: I4ef8ba30be2696e8f63d5305027d2aa629cbdb88
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Change-Id: I5601bdeb47d08118476ff7bd29435d2c1dba34b9
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Change-Id: I8890aa5cc3c576fc9fb68735549dfab721714310
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Also: permanently solve ordering issues with the vpp builtin vat
plugin loader, by explicitly loading vat plugins once we're sure that
all data plane plugins have registered their APIs / API message
handlers.
Fix compilation / link errors when the vpp builtin vat plugin loader
is disbled by cmake configuration.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Id553c63ae860ebfc196c5ad4b55c19e08fec2c9e
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: improvement
Change-Id: I9ee0407e0634f773862dd65ff5d5594814294c2c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
we can probably do better, but for now this is needed
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I07161f5ac07a70a0e6db6608ba31659d9bc2c9ed
|
|
Fix and optimize DMAC check in ethernet-input node to utilize NIC or
driver which support L3 DMAC-filtering mode so that DMAC check can be
bypassed safely for interfaces/sub-interfaces in L3 mode.
Checking of interface in L3-DMAC-filtering state to avoid DMAC check
require the following:
a) Fix interface driver init sequence for devices which supports L3
DMAC-filtering to indicate its capability and initialize interface
to L3 DMAC-filtering state.
b) Fix ethernet_set_flags() function and its associated callback
flags_change() functions registered by various drivers in interface
infra to provide proper L3 DMAC filtering status.
Maintain interface/sub-interface L3 config count so DMAC checks can be
bypassed if L3 forwarding is not setup on any main/sub-interfaces.
Type: fix
Ticket: VPP-1868
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I204d90459c13e9e486cfcba4e64e3d479bc9f2ae
|
|
Type: improvement
Change-Id: I5f89fc3d994bd85d2c5138069ea2c58661814228
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Looks like MAP_LOCK is not enough, so call mlock(...) instead....
Type: fix
Change-Id: I1bc668a2bf3c861ca1c2d376c0fb6bfea87d4f48
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Ticket: VPP-1883
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Icf50a645e114fa3b7bd974f8c82f5ceebfcedcd7
|
|
Type: improvement
Bond link state is being maintained inconsistently. It is initially set to
up. If the bond interface admin state is set to down, the link state is
set to down. If the bond interface admin state is set to up, the link
state is only set to up if there are active slave interfaces at that point.
If slaves become active at some later time, it does not get updated. Its
next chance to be updated is the next time the bond interface is set to
admin up.
To address this, do not set the link state to up after creating a bond.
Adjust the link state as slave interfaces are attached or detached
based on whether the bond is getting its first active slave or losing
its last one.
Unit test added to verify correct maintenance of link state.
Change-Id: I31f17321f7f0e727e1ab1e01713423af6566dad9
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change in snat_ipfix_header_create() to use thread-specific
vlib_main_t *vm pointer to avoid problems with different threads
accessing the same vlib_main_t data structure. This avoids
assertion failure when vlib_time_now() is called with a vm
corresponding to a different thread.
Type: fix
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
Change-Id: I2096c1debb5688d3b97e5ed9a0ea78d94053d8b7
|
|
Add a new boolean to signal that the API infrastructure should performan any required
endian conversions for the API handler.
am->is_autoendian[mm->msg_id_base + VL_API_MAP_ADD_DOMAIN] = 1;
Similarly add new REPLY_ macros that perform endian conversion.
These changes do not change the on-the-wire encoding of the API messages, and therefore the API CRC is not changed.
Type: feature
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I7588f8ccb38b2d1e8d85ea17be99bac43f756267
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I342d8f928fcc7de74f9bd288c1a5d63ea1f90020
|
|
Type: fix
when the interpose is on an adj-fib and the cover is removed the adj
source will not install. this lead to no path list being found for the
interpose source and a crash. pick a drop path list in this case.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ied217da043926c913657080f5ffb151201225d23
|
|
Type: improvement
a bihash per-interface used too much memory.
Change-Id: I447bb66c0907e1632fa5d886a3600e518663c39e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I1e9652b476bbc07852b4e701a948c36a0d8c67fa
|
|
Type: improvement
Change-Id: Ic49a43651b80b79fa278e29964da5cb2ead2a818
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: Rajesh Goel <rajegoel@cisco.com>
Change-Id: I8d128598b4c872f19b64c779c19b5908ba2f2c08
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I83dafe10cdc78fbb9a751f32155cd84d281b12d9
|
|
Type: fix
Fixes: 487507f
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia9813ae09d14111dc8edac0fa6ab082e13ab6e2e
|
|
Instead of having to wrap dump/detail calls in control ping, send details messages in between a normal
reply / request pair. As expressed in the below service statement.
Example:
service {
rpc map_domains_gets returns map_domains_get_reply
stream map_domain_details;
};
define map_domains_get
{
u32 client_index;
u32 context;
u32 cursor;
};
define map_domains_get_reply
{
u32 context;
i32 retval;
u32 cursor;
};
To avoid blocking the main thread for too long, the replies are now sent in client message queue size
chunks. The reply message returns VNET_API_ERROR_EAGAIN when there is more to read.
The API handler must also include a "cursor" that is used to the next call to the get function.
API handler example:
REPLY_AND_DETAILS_MACRO (VL_API_MAP_DOMAINS_GET_REPLY, mm->domains,
({
send_domain_details (cursor, rp, mp->context);
}));
The macro starts from cursor and iterates through the pool
until vl_api_process_may_suspend() returns true or the iteration
reaches the end of the list.
Client Example:
cursor = 0
d = []
while True:
rv, details = map_domains_get(cursor=cursor)
d += details
if rv.retval == 0 or rv.retval != -165:
break
cursor = rv.cursor
or the convenience iterator:
for x in vpp.details_iter(vpp.api.map_domains_get):
pass
or
list(details_iter(map_domains_get))
Change-Id: Iad9f6b41b0ef886adb584c97708dd91cf552749e
Type: feature
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: improvement
Change-Id: I51cbe5c76a88d7fa65fa24dc1528e4f991eba534
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|