Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0971c18a183319d09486459b0da08d44ce38acef
|
|
when the configuration of tx queues is larger than the worker-threads,
the clib_spinlock_lock_if_init will not be executed, and then this function
will executed the clib_spinlock_unlock_if_init, so this may caused the issue.
Type: fix
Signed-off-by: fangtong <fangtong2007@163.com>
Change-Id: I3ce244cd5e1f410e9f14bd060b929238f069b9fa
|
|
VRRP prefix length is 5 bytes, doesn't make sense
to compare with 6 bytes mac address
Type: fix
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: I70a9c9ca769f34a81cd568f9e6b9a3538e6ec710
|
|
Type: fix
Change-Id: Id6406702061ada54e51ebcf5c367328605de2b6b
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
The path pool can expand during in fib_path_attached_next_hop_get_adj()
when calling adj_nbr_add_or_lock(). If dpo points to a path->fp_dpo, its
reference becomes stale.
Use a temporary copy instead.
Type: fix
Change-Id: Ie966cb5f3f7b416425964dca12f1f586bfc2010c
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
The adj can be deleted during fib_walk_sync(), make sure it can happen
only after clearing the SYNC_WALK_ACTIVE flag.
Type: fix
Change-Id: I68be00e9602e2783d9dced71c51547c38b7e8a00
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
If an async crypto frame is allocated during ESP encrypt/decrypt but
a buffer/op is not subsequently added to the frame, the frame leaks. It
is not submitted if the count of async ops is zero nor is it
returned to the frame pool. This happens frequently if >= 2 worker
threads are configured and a vector of buffers all have to be handed
off to other threads.
Wait until it is almost certain that the buffer will be added to the
frame before allocating the frame to make it more unlikely that an
allocated frame will not have any operations added to it.
For encrypt this is sufficient to ressolve the leak. For decrypt there
is still a chance that the buffer will fail to be added to the frame, so
remove the counter of async ops and ensure that all frames that were
allocated get either submitted or freed at the end.
Change-Id: I4778c3265359b192d8a88ab9f8c53519d46285a2
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Test added to the unittest plugin / test_vlib.py
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I73445e57918347c102ff6f5e8c9ddb9bd96f1407
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I84985f59274e77219a38ea6ac865fc73ac635d72
|
|
Only try once and return what was found.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I50b1d26babf1b7431d36f6b7472a1fb01475bb35
|
|
Type: fix
Change-Id: I58931e235535be7d596ca578790f389b64a4fbd2
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
Type: style
reduce the number of files recompiled after changing pg.h from 1110 to
102.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I50611eba818eeb3a2dffd437a3c72c77766bed80
|
|
- return VPPCOM_EEXIST if attempting to re-add a session
- return VPPCOM_ENOENT if the session to be removed is not epolled
- generate EPOLLIN if adding it through a mod operation on a session
that has data and did not have the event previously set.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I728a06b8cf84af8d8c1dea7406e284de8886dffc
|
|
When both chained and non-chained buffers are processed in the same
vector, make sure the non-chained buffers are processed as non-chained
crypto ops.
Type: fix
Change-Id: I19fc02c25a0d5e2e8a1342e2b88bbae3fe92862f
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I76923ad5035498aae821db4fd42a127617476fbb
|
|
handle
an exception
Type: fix
Signed-off-by: jinshaohui <jinsh11@chinatelecom.cn>
Change-Id: I67b7d0b52c33a5b13ace8fe2d918139d2820e9bf
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7f5887865aa29c9881b5063be1d7d42369a493c1
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: Ifad679f46abd6e9c18a3eaf7e55800a09f3791ab
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I99af136ecab9be1f9e00de6d197b8f1c74ab4b20
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia46b0b8afed30f84b244c06f0457303f9e8832cd
|
|
Type: fix
Outbound packets from the host have an adjacency lookup performed so
buffer metadata can be filled in and output features can be applied.
If no adjacency is found for a packet, it gets dropped. This breaks
DHCP and possibly other things since the DHCP reply to a discover
request is sent to a destination MAC address that is determined by
the contents of the request packet rather than any existing neighbor
table entry.
If adjacency lookup for outbound packets does not find an entry, use
the default adjacency for the interface & address family.
Change-Id: Ia53a4df3a5bad2991768cfe4a84c560b879e656f
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
When adding a route via a udp encap instance, FIB_ENTRY_FLAG_IMPORT
should not be set. In particular, fib_route_attached_cross_table should
always return false for such paths.
Modified test_udp_encap to leverage the bug that needed to be fixed.
Type: fix
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
Change-Id: Iaa9489e96d1cff09751f92c62caf7999d924fd7f
|
|
Make sure we don't return error if app tries to setsockopt it.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I1a9a6a8da03380b0b6a6d01efed9b672a3f0b1f9
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I62fb56257445a05105e556d1ea6cc6280b5eeccc
|
|
We do not want to encap headers containing wrong checksums.
Additionnally, this clears the checksums offlads flags, which
was something missing since the outer headers checksums were
calculated during the encap. Hence, those should not be
recalculated afterwards.
Type: fix
Change-Id: I7fd07987b4f13f76c6990a1c08dc2f960bdd8de1
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
|
|
snat_set_frame_queue_nelts has been replaced with
nat44_ed_set_frame_queue_nelts.
Type: fix
Signed-off-by: Ruslan Babayev <ruslan@babayev.com>
Change-Id: I8d970be71376fdbb2bfd383d4d5824a8def93bb3
|
|
Unless a software interface is actually unnumbered, do not set
ip[46]_main.lookup_main.if_address_pool_index_by_sw_if_index [sw_if_index]
to ~0
Fixes this scenario:
loop create
set int state loop0 up
create sub-interface loop0 1
set interface ip addr loop0.1 192.168.1.1/24
delete sub-interface loop0.1
set int ip addr loop0 192.168.1.1/24
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I46141d862fa57d70b93d7bb0c105403708165264
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ifbf43dd69aa07be485fe7fa01c917512e423036e
|
|
Possibility to register a port via CLI or API to decap incoming UDP
packets:
- For CLI, a user needs to specify the inner protocol (only MPLS
supported for now)
- For API, the protocol is specified by index
Added unittests
Type: feature
Change-Id: Ifedd86d8db2e355b7618472554fd67d77a13a4aa
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I59218f784140ef5ecb8468af6aebfe25fd7703a4
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I34b53dcaf4f049157b538ea40a39033d43e525a5
|
|
- Fixes intermittent LDP cut thru iperf3 test
failure on AARCH64
Type: fix
Change-Id: Id21a078d642e03d974bacacd1f4d0faa42fb6652
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: fix
Change-Id: I7ada1b780b5c40261f6b14cfadc3f382e4e39086
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Change-Id: I1e199ae31e969154319e94c5cd286b8d8adc6660
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: make
Change-Id: I1ec82e0f3c19dee79f942996339240c73d4e380c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
This patch bumps DPDK version to 21.05 and updated VPP to
accomodate the changes in DPDK latest version.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: If217441f70c9ab531196dca7ec7a486ec9931cff
|
|
Type: improvement
set interface tx-queue tap1 queue 2 threads 1-2
show hardware-interfaces tap1
Name Idx Link Hardware
tap1 2 up tap1
Link speed: unknown
RX Queues:
queue thread mode
0 vpp_wk_1 (2) polling
TX Queues:
queue shared thread(s)
0 no 0
1 no 1
2 yes 1-2
3 no 3
4 no 4
Ethernet address 02:fe:09:3a:48:ff
VIRTIO interface
instance 1
set interface tx-queue tap0 queue 4 threads
show hardware-interfaces tap0
Name Idx Link Hardware
tap0 1 up tap0
Link speed: unknown
RX Queues:
queue thread mode
0 vpp_wk_0 (1) polling
TX Queues:
queue shared thread(s)
0 no 0
1 no 1
2 no 2
3 no 3
4 no
Ethernet address 02:fe:03:6a:66:fc
VIRTIO interface
instance 0
Change-Id: I6154476ec9ff0b14287098529c88a14b779371a5
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
This was limited to HW interface types (for historical reason AFAICT)
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I3785a356ae31722fa60d84f64ec9aa53ebdd615f
|
|
Type: fix
This patch fixes the missing symbol of dpdk_plugin.so when
creating symmetric key. The solution is to add dependency
of libssl to dpdk cryptodev and disable cryptodev engine
when libssl is not presented.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: I30aa6e3e3af1faefa82883bad613e1d82235a2ec
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I3a33230de13fef613dc9523cf24a9968d200c2e5
|
|
a uRPF check on a for-us packet is done in the correct VRF
Type: fix
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Iafa6efea0d96962aa9136dccefc148a961f74476
|
|
This reverts commit fd4fd0d1853ae7384e7a64c4cad17a3469720b95.
Type: fix
Change-Id: I6ef84f646372270ded486eacee81817067e49106
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
|
|
Add extra assertions to debug build.
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ib20130365e8f9dbb556fcbb4321dd184c7eff603
|
|
Binary api client must otherwise check the returned error and if it was
EAGAIN/EINPROGRESS poll for connect completion.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I89845b1a59b9fa2ab0968029435ceb203bfa8f6c
|
|
This reverts commit 269e1569e1f7798bf7d7f539daf505b2f1997a08.
Type: fix
Change-Id: I40bd71ae3b5e9dc8345fb2460aae437de8a9a5ba
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
|
|
Revert raw column from the perfmon plugin.
Type: refactor
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: If127f57ee2022cc1c0ea5177f1655a792f195f1d
|
|
Type: improvement
Change-Id: Iaad004661db1e9076e6c27227878f1612fa7289f
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic5e99938a5f130e83de6d590d2f89252d055bceb
|
|
interface created
Type: improvement
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I31a83cd50513078895078bae3ae11372d351ddcd
|
|
Type: fix
When enabling the endpoint independent NAT44 plugin, user_sessions
determines the maximum number of translations that can be active for
a single inside address. If 0 is passed in, a default value is used
but 0 is still stored in the field that is used to populate reply
messages to nat44_ei_show_running_config,
At the time of enabling the plugin, if user_sessions is 0, update the
field which is used by nat44_ei_show_running_config to contain the
default per-user limit which gets used by the EI nodes.
Change-Id: I6b060d85bcd42d91db879b95a8b07c6844bcd2a5
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|