Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
For some virtio backends, packets don't seem to flow
if all the queues that have been requested are not
initialized
Change-Id: I41765d668497ff954e6d69d36836590947fd93b1
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
This has two benefits: fix an issue where small packets can be
padded to 64 bytes by the ethernet layer, and we included these bytes
in the tcp stream; and also if we receive a small packet, it signals
that this tcp stream is likely more latency-sensitive than throughput-
sensitive, and skipping gro buffering should be beneficial.
Type: fix
Change-Id: I165b97673d8cdce95ebf0a66c362ae9f9e6f3f34
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ia4065550a7ad1109e3a2592ef2c21b5e23fa85b5
|
|
Move control ping and change dependencies from vpe.api_types to
memclnt.api_types
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I9f8bc442e28738c48d64d1f6794082c8c4f5725b
|
|
This prevents going through the same sequence every time the api is
called.
Type: fix
Change-Id: I3ca3587ab5d1c060e2913ca88501b8dbcdd9c196
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
VPE apis are actually vlib apis. This moves those that are not tightly
coupled with vapi to vlib_api
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I456a64ce49a0cdeff4a0931c6ea513cb639f683e
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: fix
A subinterface that does not have exact match enabled cannot have
an IP address configured on it. When this is validated in the functions
which add an interface IP address for IPv4 and IPv6, a clib_error_t * is
returned but api_errno is not set. The API handler uses the value of
vnet_main.api_errno to set the return value in it's reply. Since it was
not set, the API reports the operation succeeded.
Set vnet_main.api_errno if vnet_sw_interface_supports_addressing() returns
a non-null value when adding/deleting an interface IP address.
Change-Id: I257a30d21788986102a2a719235e714ff16a24e8
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0faeef20c57486564122e39f01f31c8c45f38014
|
|
Type: improvement
Change-Id: I10f4084907ad714aded86e0b7a1a4d1c5fa1f140
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type:improvement
Change-Id: I9f9f16eabf64203db11cd4338948d76ca5e0ef12
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
The removed code caused the feature to be wrongly removed on the wg
interface.
Type: fix
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
Change-Id: I998e01ec231527128eaeae78bcc7576ac00e5b12
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4525bc669d1c42c41dbc398cf239a093b6853298
|
|
This reverts commit c30157811e4c8e870d2680b08ecd3a38dff2d53b.
Type: refactor
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: Id011c8e5acb1613e09fd339ce614159c0acd651a
|
|
Type: fix
virtio_if_t is shared data struct between tap, tun and virtio pci.
cxq_vring is virtio pci specific element. It shouldn't be set or
accessed in tap driver.
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I8b34570f61b38d8b9d79d5b0669bda0f89ebc28c
|
|
Type: fix
virtio have three different interfaces (tap, tun and native virtio).
virtio_show() is used by CLI commands to show information about these
interfaces. It uses interface type to print interface specific information.
virtio_show() should use proper type for virtio interfaces (TAP, TUN, VIRTIO).
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I2043dc2cfe2e2f6c7c9348b8494aa4a27cab31f3
|
|
lookup node uses this field later to set fib_index for buffer
Type: fix
Signed-off-by: Artem Glazychev <artem.glazychev@xored.com>
Change-Id: I993cf80296e1713b4f13fc6ccdf49ebeaf295467
|
|
Type: improvement
e.g.:
DBGvpp# sh int 3
Name Idx State MTU (L3/IP4/IP6/MPLS) Counter Count
loop2 3 down 9000/0/0/0
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ie296167ab2b1b9576b46f6d4d9fb9546aef3a0da
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ic7d99154def71cd06e8faa64180912e5b844424e
|
|
Set tableID = ~0 for auto selection unused ID
https://jira.fd.io/browse/VPP-1993
Type: improvement
Change-Id: I4eec2cc1d18fc025196cb6ac4c9a4b374388eb56
Signed-off-by: Artem Glazychev <artem.glazychev@xored.com>
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
Type: improvement
Change-Id: I8b129b71f91b12ab2d8b05fe3891a7ab8926f072
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I3de4450b95f6fa76705923d983cf93c21b02a635
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
i.e.
memory {
default-hugepage-size 1G
}
Type: improvement
Change-Id: I822afb51712ae92f4e4992b8ffa33dcb15ccaef1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I60815b5827b4406228fd6b490f4ac1f874bac974
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: fix
|
|
Type: fix
Change-Id: I35db6763f3c5bd73169a222a4a93a917e8f468e6
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Allows to use vapi symbols in a plugin.
Type: feature
Change-Id: Ic4534f266964127af54651b7d19c3b611b277860
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
|
|
Type: feature
Change-Id: If0edbb21a0283d66c648a9e190d238c8cfa56353
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: improvement
Change-Id: I5245fc3f35b7a70833916db2ebf33f7c87398915
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I176f08c74eb58a78f7fbdb48fd4592e6ddf74d34
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Change-Id: I99162d80280e0f45344671b18b1ea96db90d4282
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
This adds a way to define default fg, bg colors
and alignement for cell tables.
It also allows removing the table title by not
setting it.
It also removes the trailing newline, for usage
inside a format("%U", format_table, ...)
Type: improvement
Change-Id: I27d7a04c4a919b34d0170b04e24a56831f581ea1
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: feature
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I3652ae275385d9b1eb1b11f418e3a7e5fef2f556
|
|
So as to be compliant with distribution layouts, as recommend by:
https://cmake.org/cmake/help/latest/command/install.html#installing-files
Type: make
Change-Id: Ic46ace4f26aab1aa4902cbd013c40a92c480680d
Signed-off-by: Nick Brown <nickbroon@gmail.com>
|
|
Type: improvement
Change-Id: Ic7c2ac4237ecd192def7c3530ae5f788c62cf9ad
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
This code seems really usefull for reuse in
other plugins, for pretty table formatting
Type: feature
Change-Id: Ib5784a0dfc81b7d5a5d1f5ccdd02072e460a50fb
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: make
Change-Id: I2958e9eddadee6434766ecd3cdb3b9cea742ed64
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
When memif CP processes the socket connection error, it may go through
the following code paths which may eventually cause double pool_put on a
clib_file
memif_master_conn_fd_error:633 -> memif_disconnect ->
memif_socket_close -> memif_file_del_by_index ->
clib_file_del_by_index -> clib_file_del -> pool_put
After memif_master_conn_fd_error:633, the code continues on
memif_maser_conn_fd_error:651 -> memif_file_del -> clib_file_del ->
pool_put
The fix is to skip calling memif_file_del in
memif_master_conn_fd_error:651 if uf->file_descriptor == ~0 to catch
problem from all possible paths in memif_master_conn_fd_error
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I0960998db1ff358a8ddd4a5e22188a244eccd270
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I89fb738903ee74ffcb7c77a041391f0388df6991
|
|
Toeplitz hash key must respect certain properties, it cannot be purely
random. Use the default one from i40e.
Type: fix
Change-Id: Ic8e67a0426de8adfecc1fcdaa99879e13ae38cc9
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
This adds a new API call to add session namespaces
It now takes a netns and a sock_name.
(1) If no netns is passed, sock_name will be used as
socket path. Defaulting to /run/vpp/app_ns_sockets/${ns_id}
(2) If a netns is passed, the sock_name has to be
abstract (i.e. start with '@'). It will default to
`@vpp/session/${ns_id}` and will be created in the provided
netns.
Type: feature
Change-Id: I90e9a8e5ecca2cabe7c05335663e33c8506dc9e7
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ic0fa4f83048a280a7d1b04198c0f903798562d2d
|
|
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I10141033030342881298d70742fa5bdea402b4c9
|
|
Type: feature
Change-Id: I91f72f5802db195d1a15424d67c1b6e518168f9f
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Change-Id: I9ce7e1ee7e7afe8e9befe36ae8c59291beaaaf36
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Currently when a new TAP/TUN device is created from tap_create_if()
via the TUNSETIFF ioctl(), a name is allocated by the kernel (eg.
tap0). If the caller supplied a name this is subsequently set via
netlink, after the device has been created.
Now we request the kernel to create the new device with the caller's
requested name in the first instance, thus avoiding the need to
rename the device, and therefore avoiding a window where the device
exists with a different name.
This can be beneficial, for example, when writing systemd-udevd link
files [1]. Having the TAP/TUN devices created with the requested name
ensures they can be correctly matched by the OriginalName option.
Writing link files might be necessary, for example, to avoid VPP and
systemd-udevd racing to set the MAC address on a newly created TAP
interface. systemd-udevd can be configured to not manipulate the MAC
addresses of matched interfaces.
These changes also resolve an issue where the created device would not
be renamed if the caller requested it be moved to a different network
namespace, since vnet_netlink_set_link_name() was not called in that
case.
[1] https://www.freedesktop.org/software/systemd/man/systemd.link.html
Signed-off-by: Duncan Eastoe <duncan@graphiant.com>
Change-Id: I3d657632856d03979d6b914225c3c841c379e0a1
|
|
This commit allows a non-VPP thread to request VPP to gracefully
shutdown and return a specific process status value.
Type: improvement
Change-Id: I9bf52b789e7ee28eb272630eaea495fd94349f79
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
Type: fix
The init of fib_index_by_sw_if_index wasn't
setting default value to 0. Which we now
need for setting interfaces unnumbered
Change-Id: Ie5be9b5e5373ef055557a871ad4d1c45fbfc1dee
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
When epoll_wait return -1, access array epoll_events[i] out of bound
and lead to segmentation fault.
1. Change return value to signed return value
2. Skip non fatal error e.g. EINTR
Type: fix
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: I4ece118999402ec6054baf0efb52419151655def
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id0e67a9ce9c5d8bca2cd7a30493f03a02a46dc46
|
|
CLIB_PREFETCH (cop[1], CLIB_CACHE_LINE_BYTES * 3, STORE);
Note on 64 bytes cache line size arm machines,
CLIB_CACHE_LINE_BYTES 128
CLIB_CACHE_PREFETCH_BYTES 6
above CLIB_PREFETCH () macro will be expand to
ASSERT ((size) <= 4 * CLIB_CACHE_PREFETCH_BYTES);
it will hit assert due to size (i.e. 3 * 128) > 4 * 64
Solution:
Change to CLIB_PREFETCH (cop[1], sizeof(*cop[1]), STORE);
Type: fix
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Reviewed-by: Lijian Zhang <lijian.zhang@arm.com>
Change-Id: Id0981fd5bd2b25ff71db4197b25578d0b7a9803e
|
|
Type: feature
Thought this might be useful when using
many VRF to get the list of allocated
VRFs and corresponding names
Change-Id: If9d2c6612d4215e7576315d66d1eb130fcecfa13
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|