Age | Commit message (Collapse) | Author | Files | Lines |
|
1. Malloc may return not zero buffer, causing strncat buffer overflow
2. Malloc buffer not freed
Type: fix
Fixes: 31f192434660 ("misc: vppctl - remove the dependency on vppinfra")
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: I5aebaccf3d0f8b7e3617068267f62cc2aa39d827
|
|
Configure a vxlan tunnel using this CLI and then assign an ip address to
the vxlan tunnel cause VPP to crash immediately
create vxlan tunnel src x.x.x.x dst y.y.y.y vni 1000 decap-next node ethernet-input l3
set interface ip address vxlan_tunnel0 z.z.z.z/24
It looks like when l3 mode is configured, the code calls the wrong function
to register the interface
Type: fix
Fixes: 3e38422ab905d26ab1625c74268e30c94327ea54
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ie1a08efc028f37fb528a7dfd7048ff6836bb8ddc
|
|
When a message is received, verify that it's sufficiently large to
accomodate any VLAs within message. To do that, we need a way to
calculate message size including any VLAs. This patch adds such
funcionality to vppapigen and necessary C code to use those to validate
message size on receipt. Drop messages which are malformed.
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I2903aa21dee84be6822b064795ba314de46c18f4
|
|
Zero length fragments are invalid and should be dropped. This patch adds
that.
Type: improvement
Change-Id: Ic6466c39ca8bf376efe06bb3b7f5d7f1ae812866
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: improvement
Change-Id: I93be722f4dabc2b49a5e83f61f4eb1d72f5f7d45
Signed-off-by: Damjan Marion <dmarion@me.com>
|
|
arp proxy is not enabled correctly by ip4_neighbor_proxy_enable()
Type: fix
Signed-off-by: Mercury <mercury124185@gmail.com>
Change-Id: I672b5d4a9652030b5604e9d39743c39cb93a2531
|
|
When the src-address to add match a route
without a valid output interface(such as default route 0.0.0.0/0),
fib_entry_get_resolving_interface() will return (u32)~0,
which will cause crash in ip4_neighbor_proxy_enable().
Type: fix
Signed-off-by: Mercury <mercury124185@gmail.com>
Change-Id: I5aee5676a2ff43ec06745ebed4dba2b9e5b98c4d
|
|
If a fragment arrives with fragment offset = 0 and M = 0, it means that
this is actually a complete packet and per RFC 8200, it should be
treated independently from other fragments. This patch does that.
Fragmentation header is stripped and fragment is forwarded irregardles
of other existing reassemblies in case of full reassembly and treated
the same way as regular packet in shallow virtual reassembly.
Type: improvement
Change-Id: If3322d5e3160cd755b8465a642702a9166d46cc2
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
TCP csum offload fails although udp seems to work.
Type: fix
Fixes: fa1fb60
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie0651887b09920365806eaad776b0d13059faee8
|
|
Type: make
Change-Id: I20fd245585e5b62ff20fe3adf20b14bfef47a9ca
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0375d639e979e29d287dc9fee16b0434fb5c788b
|
|
Type: fix
Signed-off-by: Han Wu <wuhan9084@163.com>
Change-Id: I0aeafd273b3d1d01df02d638c72461943f91ef90
|
|
Improve vppapigen to generate per-message #define indicating whether
said message is dynamically sized (due to VLA or string) or not. Use
these #defines in REPLY_MACROs to prevent improper usage. Fix existing
improper REPLY_MACRO* usage.
Type: improvement
Change-Id: Ia77aaf9f6cf3ed68ea21075a4cc8deda78a68651
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ied4fe0f2b35eeca4e3e82fa21346de7f243aa52a
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I42b5a5a07aae6708a20ed424c8f26ddbe91278fb
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I18cd4131c692e776c98eba36161813035e9dec53
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I817e8510029a060876697701b81a952286597db1
|
|
fib_sas6_get is called with NULL dst explicitly so add a NULL check to
avoid a NULL dereference.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I8ebcba98832f374991f5442c1b83a4b6e64771d0
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id1e273bf80c1cc687ce7e5ea3b8cc6a3ec3862f9
|
|
Type: improvement
Change-Id: I5ed9029e5dc1368b7debbef04a3ac439a61af9ea
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I8a5d8d5db4e4a8ee3a1164bfbe91badff181d06a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: make
Change-Id: Icced0e09b75b3114b1652d552e288091968ee7cc
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Fixes: f16e9a5507
If an attempt to submit an async crypto frame fails, the buffers that
were added to the frame are supposed to be dropped. This was not
happening and they are leaking, resulting in buffer exhaustion.
There are two issues:
1. The return value of esp_async_recycle_failed_submit() is used to
figure out how many buffers should be dropped. That function calls
vnet_crypto_async_reset_frame() and then returns f->n_elts. Resetting
the frame sets n_elts to 0. So esp_async_recycle_failed_submit() always
returns 0. It is safe to remove the call to reset the frame because
esp_async_recycle_failed_submit() is called in 2 places and a call to
reset the frame is made immediately afterwards in both cases - so it
is currently unnecessary anyway.
2. An array and an index are passed to esp_async_recycle_failed_submit().
The index should indicate the position in the array where indices of the
buffers contained in the frame should be written. Across multiple calls,
the same index value (n_sync) is passed. This means each call may overwrite
the same entries in the array with the buffer indices in the frame rather
than appending them to the entries which were written earlier. Pass n_noop
as the index instead of n_sync.
Change-Id: I525ab3c466965446f6c116f4c8c5ebb678a66d84
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: feature
Change-Id: I231f782b3c56dc2b10321e4569ac7acdad1c11da
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
REPLY_MSG_ID_BASE is the standard way to define reply message id base,
so this refactor makes all the files use that. This is a preparation
patch for future safety add-ons which rely on REPLY_MACRO* parameters to
be preprocessor tokens identifying the message instead,
Type: refactor
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ibe3e056a3d9326d08af45bbcb25588b11e870141
|
|
Refactor and improve boundary checking on IPv6 extension header handling.
Limit parsing of IPv6 extension headers to a maximum of 4 headers and a
depth of 256 bytes.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ide40aaa2b482ceef7e92f02fa0caeadb3b8f7556
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: fix
When registering a new FIB node type, no name was required on the API, and so no name was printed.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I8a99cf29c194637a550061b0a5e9782ffe8b31dd
|
|
Type: test
Change-Id: Ic9fddc9fedd5140984c5901c4cac53dec022dcec
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
A bit ugly, but generates faster and less noisy code which
should be important for this particular use case.
Type: improvement
Change-Id: If2bba947dac33ffedb4236a5b3fb50fc783668e1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I7aacd58d113c13036c15655817400032dd8d1932
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Refactoring perf metric support to remove branching on bundle type in
the dispatch wrapper. This change includes caching the rdpmc index at
perfmon_start(), so that the mmap_page.index doesn't need to be looked
up each time. It also exclude the effects of mmap_page.index.
This patch prepares the path for bundles that support general, fixed and
metrics counters simulataneously.
Type: refactor
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I9c5b4917bd02fea960e546e8558452c4362eabc4
|
|
Type: make
Change-Id: I1cd00257e132e671cbdd7b4710862afb07aa19e6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Change-Id: I8b3fc2ce30df313467274a174c5ac6adbf296153
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: Id73b00a8cb3af799f9f97949bc1302f162a91a57
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I22fec740b30b89e7a571f8ba2bd55adb2ef305d4
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Change-Id: I7c341dc4a99898dd1f865ac2ebd99de9898bb0bd
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: If6235888cb0870ec3e1279ab1856a00715bd6c68
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I89103d4c99b21c5a466dbe511f0151bd754559a0
|
|
Type: improvement
This patch adds AES-CTR-128/192/256 + SHA1 linked algo support to dpdk
cryptodev.
Signed-off-by: PiotrX Kleski <piotrx.kleski@intel.com>
Change-Id: Idc162b29f4075ef8be9577abd3daf6de05f84faa
|
|
Originally cryptodev allocates mempools for seesion and session private
data during its initialization. Moreover the size of these mempools are
fixed resulting in limited session count (up to value specified in
CRYPTODEV_NB_SESSION macro).
This patch allows for session count to scale up by allocating new
mempools as they are needed during session creation.
Type: improvement
Signed-off-by: Dastin Wilski <dastin.wilski@gmail.com>
Change-Id: I6ae240b474d3089d3ff50ca5bc7ff48f149983db
|
|
vl_api_c_string_to_api_string declared in api_types.h
and defined in api_shared.c. Remove from jsonformat
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I994c8c13b7246a857464c1f879432f73692c6d1f
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic941065aa7d7c0002863a6391c8914089c438445
|
|
Make sure segment is empty after writer lock acquired. Other workers
might add fifos in between empty test and writer lock acquire.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I3400fdd14be98d9d8fb4e415d3a849be1d255241
|
|
Avoid constantly re-mapping a listener's first segment when all its
sessions are closed.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iea7033fb70f4cf9e4408d542b7c0ff2b0c5c2f92
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I3e633f017c68e8c5446e45b577048138a387daf6
|
|
Acceping sessions might be rejected so the notification might not make
sense.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I3ababdce7c2cec62941d9722a9c06fa48ec547db
|
|
The code to check the exp is set after the call to pool_get()
is marked as unreachable in coverity. This is becasue if it
fails in pool_get then the it panics. Remove the unreachable code.
Type: fix
Signed-off-by: Paul Atkins <patkins@graphiant.com>
Change-Id: Iabb51b6b6788b6c12ef37c28dde2118c798de831
|
|
Type: fix
Signed-off-by: wanghanlin <wanghanlin@corp.netease.com>
Change-Id: Iab857b056639f7e513f87a6095bea081b7d8349c
|
|
Type: fix
This fixes the GSO size calculation in af_packet
which didn't include the ethernet size.
This is not ideal, as we default to the host
side mtu to check whether a packet is GSO or not
and to set the GSO size. But there doesn't seem
to be more info passed with the packets.
Change-Id: I9769e1dd21d5989b4cf67295352b5535454f88d1
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
- Always check session ownership
- Improve test for main thread rpc
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5fa60f7f5de199af0966987f9ce9a4cc8180cf98
|