summaryrefslogtreecommitdiffstats
path: root/src
AgeCommit message (Collapse)AuthorFilesLines
2017-07-08Add API support for LLDP config/interface setSteve Shin11-47/+401
Add API methods to configure LLDP and set interface to enable/disable. Also add port description TLV for LLDP. Change-Id: Ib959d488c2ab8a0069f143558871f41fcc43a5d3 Signed-off-by: Steve Shin <jonshin@cisco.com> (cherry picked from commit 99a0e60eb6f6acd7eabd5a4cb7ded1e0419ccd54)
2017-07-06Send GARP/NA on bonded intf slave up/down if in active-backup modeJohn Lo7-8/+232
If a bonded interface is in active-backup mode and configured with IPv4 and/or IPv6 addresses, on slave interface link up/down, send a GARP packet if configured with an IPv4 address and an unsolcited NA if configured with an IPv6 address. These packets can help with faster route convergence in the next hop router/switch. Change-Id: I68ccb11a4a40cda414704fa08ee0171c952befa2 Signed-off-by: John Lo <loj@cisco.com> (cherry picked from commit 8b81cb43359380e50d3fc216d93ff05894149939)
2017-07-06VPP-902: LISP-CP: Wrong size in one_l2_arp_entries_get message.Ole Troan1-1/+1
Change-Id: I56bf6b46527f9465d78ed7c08b6e216e50c135ec Signed-off-by: Ole Troan <ot@cisco.com>
2017-07-06Remove autosudo from pythonic vppctlEd Warnicke1-3/+0
Change-Id: Iaea91a95d58678b8b3c56f3fceab76817e0f63ff Signed-off-by: Ed Warnicke <eaw@cisco.com>
2017-07-05Buffer name inconsistently used a cstring/vec (VPP-901)Chris Luke1-3/+3
Spotted in the output of CLI command "show buffers", the name field sometimes had trailing garbage, the hall sign of a string not being terminated. In this case it was being inconsistently used as a cstring or a vec. - CLI printf needs %v to print the vec srring - vlib_buffer_create_free_list_helper tried to use clib_mem_is_heap_object() to detect a vec object, wheras it should use clib_mem_is_vec() Change-Id: Ib8b242a0c5a18924b8af7e8e1432784eebcf572c Signed-off-by: Chris Luke <chrisy@flirble.org>
2017-07-04Refactor API message handling codeKlement Sekera11-477/+609
This is preparation for new C API. Moving common stuff to separate headers reduces dependency issues. Change-Id: Ie7adb23398de72448e5eba6c1c1da4e1bc678725 Signed-off-by: Klement Sekera <ksekera@cisco.com> (cherry picked from commit 58eb866b15a45514dc356170f28640d6c9db8034)
2017-07-04acl-plugin: fix acl plugin test failing sporadically (VPP-898)Andrew Yourtchenko1-0/+5
The "acl_plugin" tests has one of the tests sporadically fail with the following traceback: r.reply.decode().rstrip('\x00') UnicodeDecodeError: 'ascii' codec can't decode byte 0xd8 in position 20666: ordinal not in range(128) This occurs in the newly added "show acl-plugin table" debug CLI. This CLI has only the numeric outputs, so the conclusion is that it is the incorrect termination (trailing zero) that might be most probably causing it. The other acl-plugins show commands also lack the zero-termination termination, so fix all of them. The particularity of this command vs. the other acl-plugin debug CLIs is that the accumulator is freed and allocated multiple times, this might explain the issue is not seen with them. Change-Id: I87b5c0d6152fbebcae9c7d0ce97155c1ae6666db Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-07-03acl-plugin: VPP-897: applying of large number of ACEs is slowAndrew Yourtchenko2-20/+45
When applying ACEs, in the new hash-based scheme, for each ACE the lookup in the hash table is done, and either that ACE is added to the end of the existing list if there is a match, or a new list is created if there is no match. Usually ACEs do not overlap, so this operation is fast, however, the fragment-permit entries in case of a large number of ACLs create a huge list which needs to be traversed for every other ACE being added, slowing down the process dramatically. The solution is to add an explicit flag to denote the first element of the chain, and use the "prev" index of that element to point to the tail element. The "next" field of the last element is still ~0 and if we touch that one, we do the linear search to find the first one, but that is a relatively infrequent operation. Change-Id: I352a3becd7854cf39aae65f0950afad7d18a70aa Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-07-01devices: show interface rx-placement displays the wrong information (VPP-894)Steven1-1/+3
show interface rx-placement somtimes displays the wrong interface names. This happens when there exists subinterfaces in VPP. The problem is due to the function show_interface_rx_placement_fn is calling format_vnet_sw_if_index_name with hw_if_index instead of sw_if_index. VPP has the concept of sw_if_index and hw_if_index. Each serves a different purpose. When there is no subinterfaces, both hw_if_index and sw_if_index may happen to have the same value.But don't count on it. When the API calls for sw_if_index, we must pass the sw_if_index although the hw_if_index has the same type which the compiler does not catch. Passing hw_if_index for an API which requires sw_if_index may have an unpredictable result such as described in the VPP-894 and sometimes it may even crash if the particular index does not exist. Change-Id: I76c4834f79b88a1c20684fcba64f14b2da142d77 Signed-off-by: Steven <sluong@cisco.com>
2017-06-30VPP-893: handle multiple simultaneous event registrationsDave Barach2-1/+7
Change-Id: I8cd90820624987dbef848935e2de86fa66a86c17 Signed-off-by: Dave Barach <dave@barachs.net>
2017-06-30IP4/IP6 FIB: fix crash during interface deletePavel Kotucek4-1/+42
after deleting a sub interface with IP4/IP6 address vpp crash Change-Id: Ie768ca845b9e2394f61e2a8e9722a80a788746e7 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com> (cherry picked from commit 9f5a2b6310ce5c8e59c32ca6f27d8a187b0e4346)
2017-06-29VPP debug image with worker threads hit assert on adding IP route with ↵Neale Ranns3-1/+39
traffic (VPP-892) When stacking DPOs the VLIB graph is also updated to add the edge between the nodes, if this edge does not yet exist. This addition should be done with the workers stopped. Change-Id: I327e4d7d26f0b23eb280f17e4619ff2093ff7940 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-06-27L2-LEARN:fix l2fib entry seq num not updated on hit (VPP-888)Eyal Bari5-87/+64
fixed instability in l2bd_multi_instnce test - sometimes failing with extra packets captured it appears l2-learn was not updating hit entries but rather a copy of them. if the ager did not have a chance to run before the test was running the learning cycle - entries were not updated with the packet's seq num - causing packets to flood when hitting the stale seq_num in l2-fwd - hence the extra packets fixed handling of filter entries revert workaround for instability in test Change-Id: I16d918e6310a5bf40bad5b7335b2140c2867cb71 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-06-26VPP-889: MAP Stats API/CLI crashes when no domains.Ole Troan2-1/+11
Change-Id: Ib7824bfc08cb3c8f20258379e1a1f2c159c4f687 Signed-off-by: Ole Troan <ot@cisco.com>
2017-06-25VPP crash on creating vxlan gpe interface. VPP-875Hongjun Ni5-19/+118
Change-Id: I6b19634ecb03860a7624d9408e09b52e95f47aef Signed-off-by: Hongjun Ni <hongjun.ni@intel.com> (cherry picked from commit 04ffd0ad83b2d87edb669a9d76eee85f5c589564)
2017-06-22Update lisp map record default ttl to 24hv17.10-rc0Florin Coras1-2/+2
Change-Id: Ib8c72f8e08e89357b64f2f69ab70d60d3a7ec506 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-06-22Improve svm fifo and tcp tx path performance (VPP-846)Florin Coras8-35/+232
- multiarch on svm fifo - avoid ip lookup on tx Change-Id: Iab0d85204a710979417bca1d692cc47877131203 Signed-off-by: Florin Coras <fcoras@cisco.com> Signed-off-by: Dave Barach <dbarach@cisco.com>
2017-06-22Export and Install GTP-U API fileHongjun Ni1-1/+1
Change-Id: I064d22277a0334c63f3d5072b1584b93e327b331 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2017-06-22acl-plugin: clean up the code enabling/disabling acl-plugin processing on ↵Andrew Yourtchenko2-4/+18
interface Multiple subsequent calls to vnet_feature_enable_disable() to enable the feature cause the feature to be inserted into the processing graph multiple times in a row. This might be argued to be a bug in that function, but enabling already enabled feature is suboptimal anyway, so avoid that. The existing tests already catch this issue whenever the ASSERT() part of this patch was added. Change-Id: Ia2c06f7dc87bbe05795c2c7b7d19ea06270ce150 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-06-22NAT64: documentationMatus Fabian2-0/+211
added CLI command documentation added NAT64 user documentation page Change-Id: I3df400013800fe16351e02db7762ee3f92b195ff Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-06-22VNET:explicitly pad l2_classifyEyal Bari1-10/+4
Change-Id: I77412aa8c17b45b1533604e7bfe8fe052ed0f80a Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-06-21Introduce default rx mode for device driversDamjan Marion5-7/+19
If interface is down and queues are not configured then we are not able to change rx-mode. This change introducess default mode which is stored per interface and applied if driver wants. Change-Id: I70149c21c1530eafc148d5e4aa03fbee53dec62f Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-06-21acl-plugin: the second and subsequent ACEs incorrect endianness when ↵Andrew Yourtchenko1-4/+22
custom-dump and in VAT (VPP-885) Add the missing function to convert the entire array of rules in the respective _endian functions, rather than just the first rule. Change-Id: Ic057f27ff7ec20150595efca1a48b74e5850f52b Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-06-21acl-plugin: CLI to clear all sessionsAndrew Yourtchenko2-8/+38
It is useful to have the CLI to clear the existing sessions. There was a work-in-progress CLI but it did not work properly. Fix it and split into a separate "clear acl-plugin sessions", and add a unit test into the extended connection-oriented tests. Change-Id: I55889165ebcee139841fdac88747390903a05394 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-06-21acl-plugin: use ethernet_buffer_header_size() to determine the size of the ↵Andrew Yourtchenko1-1/+1
ethernet header When extracting the 5-tuple, use the ethernet_buffer_header_size() so we can correctly handle the case of subinterfaces, etc. Change-Id: Ied73fde98d6b313e9eeab2aff4f22daa50a6cbbf Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-06-21acl-plugin: fix coverity issue 170476Andrew Yourtchenko1-2/+1
Remove the unnecessary variable assignment which coverity detected. Change-Id: I66ac20a8495400ac59192ddb72f16c95f6b4d03c Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-06-21acl-plugin: fix coverity issue 166801Andrew Yourtchenko1-1/+1
A typo resulted in a value being overwritten and flagged as unused, fix the typo. Change-Id: I512ba94321afb80d12c71ebbb0eec42d9fa6f299 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-06-21NAT64: custom prefixMatus Fabian6-65/+494
Change-Id: If397b49861468eed29b964fa64b186f80eb0eceb Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-06-21memif: minor changes in memif.hDamjan Marion2-16/+20
Change-Id: Iff550fd65f6e559b9fdfbbd53ef92d287c18166c Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-06-21Add option to create clib_socket with group write permissionsDamjan Marion3-1/+14
Also allow group write as default for CLI socket connections. Change-Id: I6af1f277f70581358cd9241bf0f5cb0752fe250f Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-06-21Add knob to specify effective group id (gid) for VPP processDamjan Marion3-0/+36
Change-Id: Icf9bd4abda058fb380f1a25d5fe3917ffb38b1c4 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-06-21ARP: ignore non-connected routes and non-interface sources when determing if ↵Neale Ranns2-33/+104
source is connected Change-Id: I39fb0ec44cc322eaa12c0ff0700fc405d3982bfc Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-06-21acl-plugin: fix coverity error 171135Andrew Yourtchenko1-0/+2
The code path which sets the sw_if_index aimed to restrict the output did not set the flag to trigger that output. Change-Id: I0a1a3977fdddbce9a276960df43fed745d099ca0 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-06-21acl-plugin: vat: acl_interface_list_dump confusing/incorrect output in case ↵Andrew Yourtchenko1-2/+2
n_input == 0 The logic to print the line " output " is wrong for the case of n_input == 0, and the applied ACLs are printed as if they were applied on input. One may still figure out the truth by looking at the n_input value above, but it is confusing. Change-Id: I7b4a4d548e569994678dd1e139eb829456548b88 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-06-20vlib: make runtime_data handling thread-localIgor Mikhailov (imichail)1-16/+26
Change-Id: Ic2f2dc234199a5f882846880cbacff20fc8d477b Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
2017-06-20Parenthesize the usage of the macro argument within vec_search() macro ↵Andrew Yourtchenko1-1/+1
definition Change-Id: I488d7c2b864c0e3661c8abf0363e4b97984d4974 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-06-20SNAT: unknow protocol hairpinning fixMatus Fabian1-1/+1
Change-Id: I15813167e7c8529f229143de4a8f64f0fb530951 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-06-20VPP-879 MAP: s/u32 is_add/u8 is_add in map.apiOle Troan1-1/+1
Change-Id: If35171005e409f77bed4cc16eccb66a85aae5dfb Signed-off-by: Ole Troan <ot@cisco.com>
2017-06-19L2FWD:fix seq_num overwritten + validate l2fib entries when forwardingEyal Bari8-56/+99
l2_classify memeber table_index was overlaid over l2.l2fib_seq_num which over written when table_index gets initialized in l2_input_classify solved by overlaying both table_index and opaque_index as only one is used seperated l2fib seq num from l2_input configs for better handling of theoretical ABA issue where an entry for a deleted interface is considered valid by the ager because a different interface with same sw_if_index and seq_num was created before the ager got a chance to delete Change-Id: I7b0eeded971627406f1c80834d7e02c0ebe62136 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-06-19NAT64: change not supported multi threading behaviourMatus Fabian5-6/+104
Disable CLI/API commands instead of error message on startup. Change-Id: I313ed6e2ea009f573afb5e08b0e85ed1f9091dc3 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-06-19memif: add ip modeDamjan Marion4-35/+132
In IP mode memif interface is L3 point-to-point interfaces and we don't pass l2 header. There is no l2 header rewrite operation and received packets are sent straight to ip4-input / ip6-input nodes. Change-Id: I4177f3fce3004da7ecf14d235006ae053fcf3f09 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-06-19Overall tcp performance improvements (VPP-846)Florin Coras23-568/+945
- limit minimum rto per connection - cleanup sack scoreboard - switched svm fifo out-of-order data handling from absolute offsets to relative offsets. - improve cwnd handling when using sacks - add cc event debug stats - improved uri tcp test client/server: bugfixes and added half-duplex mode - expanded builtin client/server - updated uri socket client/server code to work in half-duplex - ensure session node unsets fifo event for empty fifo - fix session detach Change-Id: Ia446972340e32a65e0694ee2844355167d0c170d Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-06-19SNAT: NAT packet with unknown L4 protocol if match 1:1 NATMatus Fabian2-6/+104
Change-Id: Ic81c6098d615fdb6a874e532921efd833fed872c Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-06-19acl-plugin: bihash-based ACL lookupAndrew Yourtchenko10-10/+1572
Add a bihash-based ACL lookup mechanism and make it a new default. This changes the time required to lookup a 5-tuple match from O(total_N_entries) to O(total_N_mask_types), where "mask type" is an overall mask on the 5-tuple required to represent an ACE. For testing/comparison there is a temporary debug CLI "set acl-plugin use-hash-acl-matching {0|1}", which, when set to 0, makes the plugin use the "old" linear lookup, and when set to 1, makes it use the hash-based lookup. Based on the discussions on vpp-dev mailing list, prevent assigning the ACL index to an interface, when the ACL with that index is not defined, also prevent deleting an ACL if that ACL is applied. Also, for the easier debugging of the state, there are new debug CLI commands to see the ACL plugin state at several layers: "show acl-plugin acl [index N]" - show a high-level ACL representation, used for the linear lookup and as a base for building the hashtable-based lookup. Also shows if a given ACL is applied somewhere. "show acl-plugin interface [sw_if_index N]" - show which interfaces have which ACL(s) applied. "show acl-plugin tables" - a lower-level debug command used to see the state of all of the related data structures at once. There are specifiers possible, which make for a more focused and maybe augmented output: "show acl-plugin tables acl [index N]" show the "bitmask-ready" representations of the ACLs, we well as the mask types and their associated indices. "show acl-plutin tables mask" show the derived mask types and their indices only. "show acl-plugin tables applied [sw_if_index N]" show the table of all of the ACEs applied for a given sw_if_index or all interfaces. "show acl-plugin tables hash [verbose N]" show the 48x8 bihash used for the ACL lookup. Change-Id: I89fff051424cb44bcb189e3cee04c1b8f76efc28 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-06-19NAT64: Hairpinning (VPP-699)Matus Fabian7-52/+477
Change-Id: I83a6c277fa211ac2c2ca2d603650c992886af0a7 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-06-17Fix map-notify processing with multiple workersFlorin Coras2-13/+44
Change-Id: Id160346ebf533ee5f55bd735803624a75ed997b9 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-06-16memif: show memif CLI enhancementSteven1-39/+115
Add optional keywords to show memif to allow display a particular interface and option to display the descriptor tables. The new syntax for the show memif command is now show memif [<interface>] [descriptors] Change-Id: I20696bbea1142bdc152b6e351c6ece24b1cf5500 Signed-off-by: Steven <sluong@cisco.com>
2017-06-16memif: jumbo frames supportSteven2-148/+272
Current memif interface supports frame size up to 2048. This patch is to enhance memif to support jumbo frames. On tx (writing buffers to the ring), keep reading the next buffer in vlib when the flag VLIB_BUFFER_NEXT_PRESENT and merge it to the same ring entry. Use descriptor chaining if the buffer is not big enough. On rx (reading buffers from the ring), if the packet is greater than 2048, create multiple vlib buffers, chained with the VLIB_BUFFER_NEXT_PRESENT. Testing: Because the ping command provided by VPP does not support jumbo frames, I have to use linux ping. Here is the set up that I use for testing. VM1 --- vhost ---- VPP1 --- memif --- VPP2 --- vhost --- VM2 Create vhost-user interfaces between VM1 and VPP1 and between VPP2 and VM2 VM configuration: Set the interface mtu on the VM, e.g 9216 to support jumbo frames. create static route and static arp on VM1 to VM2 and vice versa. Use iperf3 or ping -s 8000 from VM1 to VM2 or vice versa. Sample run sluong@ubuntu:~$ ping 131.1.1.1 -c1 -s 8000 ping 131.1.1.1 -c1 -s 8000 PING 131.1.1.1 (131.1.1.1) 8000(8028) bytes of data. 8008 bytes from 131.1.1.1: icmp_seq=1 ttl=62 time=0.835 ms --- 131.1.1.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.835/0.835/0.835/0.000 ms sluong@ubuntu:~$ DBGvpp# sh interface memif0 Name Idx State Counter Count memif0 1 up rx packets 1 rx bytes 8042 tx packets 1 tx bytes 8042 ip4 1 DBGvpp# Change-Id: I469bece3d45a790dceaee1d6a8e976bd018feee2 Signed-off-by: Steven <sluong@cisco.com>
2017-06-16LISP-GPE: add test CLI for NSHFilip Tehlar2-0/+132
Change-Id: I9999474c1a4b744f5d5880ee99a0293c576f2819 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-06-16Add missing barrier sync to rx placement infra codeDamjan Marion2-6/+18
Change-Id: I25ccf8260dbe7e1550aee3904a688fc135ce1f03 Signed-off-by: Damjan Marion <damarion@cisco.com>