Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: Ic9bc303b65c95a0e06f90c75b067056b0b11e654
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- We now have several developer-focused docs, so create an index page
for them.
- Rework several docs to fit into the index structure.
- Experiment with code highlighting; tweak the CSS slightly to make
it slightly nicer to look at.
Change-Id: I4185a18f84fa0764745ca7a3148276064a3155c6
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
It was observed that under heavy traffic, VPP accidentally sent traffic
with the wrong source and destination to the tun/tap interface. Traffic
appears to be sent to the wrong direction. This problem is only
seen when worker thread is configured.
When worker thread is used, TX and RX may reside in different
core. Yet both TX and RX threads are sharing the same global variable,
namely iovecs without any mutex or memory barrier protection.
This creates a race condition when heavy traffic is blasted to VPP,
like 1000 pps.
We could create a mutex or memory barrier to ensure atomic memory access.
But why bother? It is a lot cheaper to just decouple the iovecs such
that TX and RX have their own iovecs.
Change-Id: I86a5a19bd8de54d54f32e1f0845bae6a81bbf686
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I5ca5763f0dc0a73cc6f014b855426b7ac180f356
Signed-off-by: Matej Perina <mperina@cisco.com>
|
|
Change-Id: Ib675164c475edcdbe3013df7b847adf5e050c53f
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
On host interface if a VLAN tagged packet is received, linux kernel removes
the VLAN header from packet byte stream and adds metadata in tpacket2_hdr.
This patch explicitely checks for the presense of VLAN metadata and adds it
in VPP packet.
Change-Id: I0ba35c1e98dbc008ce18d032f22f2717d610c1aa
Signed-off-by: Akshaya N <akshaya@rtbrick.com>
|
|
UIO binding is not required for Mellanox NIC and calling vlib_pci_bind_to_uio()
should be skipped.
Change-Id: I10ea457bc3c8d4be8117dec51d5bd940ee416a44
Signed-off-by: Steve Shin <jonshin@cisco.com>
|
|
174267: Revisit this string termination issue
174816: Add check for NULL when trace is enabled
177211: Add notation that mutex is not required here
177117: Added check for log2_page_size == 0 and returns an error if so
163697,163698: Added missing sw_if_index validation
Change-Id: I5a76fcf6505c785bfb3269e353360031c6a0fd0f
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
The replacement of [] with pool_elt_at_index and subsequent fixing it
was incorrect - it was equivalent to &[], since it returns a pointer to
the element. I've added VPP-993 previously to create a testcase,
so this commit partially fulfills that one as well.
Change-Id: I5b15e3ce48316f0429232aacf885e8f7c63d9522
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I2cf4c4850b9c3c093a7dce0cec89b9f710f69393
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Update ping code to use the new function
Change-Id: Ieb753b23f8402cbe5667c22747896784c8ece937
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I3873d3e411bf93cac82e73a0b8e3b22563aaf217
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I7d8f807fb502d61688aa1dee25fa4edcbeb32f41
Signed-off-by: Aequitas <wang.junqi@zte.com.cn>
|
|
Change-Id: I365c31607332a944ef498369881332b515894ed7
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
vector elements
bb7f0f644 aimed to fix the coverity issue has incorrectly replaced the previous [] access
with pool_elt_at_index(), for an element of a vector, with predictably interesting result.
VPP-991 has uncovered the issue.
Change-Id: Ifd3fb70332d3fdd1c4ff8570372f394913f7b6c8
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: Idad65cbb3765500a66f1097126076a2c5fdb4f1b
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
|
|
For bonded interface in Active/Backup mode (mode 1), we need to
send a GARP/NA packet, if IP address is present, on slave link
state change to up or down to help with route convergence. The
callback from DPDK happens in a separate thread so we need to make
sure RPC call is used to signal the send_garp_na process in the
main thread. Also need to fix DPDK polling so the slave links are
not polled.
Change-Id: If5fd8ea2d28c54dd28726ac403ad366386ce9651
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: Id1a5da12b13d87bacfa81094f471b95db40c39be
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I7f18f8c4ba609d96950dc1f833feb967d4a099b7
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
In this specific corner-case setup, ioctl (0, TIOCGWINSZ) returns
window height = 0 and width = 0. Rather than declaring the terminal to
be non-interactive, set the window size parameters to 80 x 24.
Change-Id: If66f5f0883f1940518ec1c6e26228c9bb6f32852
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
When changing the admin state of a vhost-user interface, do not put it
in link-up mode if the interface is not actually ready.
Change-Id: Idbc631a7126efa79d199909f9e7656d21bd412ca
Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
|
|
It was useful for debugging once upon a time...
but time to say goodbye to it...
Also remove the warning printed when sending ACL details.
Change-Id: I43b2537e176556831eb7ff34b25c9068aa05ee27
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
wildcard ND events publisher was sending the last event mutiple times
Change-Id: I6c30f2de03fa825e79df9005a3cfaaf68ff7ea2f
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Short version: Make vppctl behave as expected when run
from scripts, or without a controlling terminal, and
especially when using it with VPP commands on its
command line ("non-interactively").
In particular, prevent the welcome banner and VPP CLI
prompt from being sent by VPP when being used in these
ways.
vppctl
------
- Improve vppctl's detection of non-interactive sessions.
- Pass non-interactiveness in the terminal type telnet option
as a value distinct from "dumb" (which means non-ANSI capable.)
- Make tty setup handling more robust.
- Only send non-interactive command once we've sent the
terminal type, to ensure correct event sequence; we need
the VPP cli session to be in line-by-line mode.
- Ignore stdin when it looks something like /dev/null.
- Skip NUL bytes received from VPP.
VPP CLI
-------
- Detect "non-interactive" terminal types and set session
parameters accordingly.
- Add an "interactive" flag that controls whether the welcome
banner and CLI prompt are sent.
- Detect if telnet options processing switched us into line
mode and act accordingly for the rest of the current input
buffer. This was causing the command string to be echoed
by the CLI editor code.
- For non-interactive sessions, send a NUL byte after the
input buffer has been processed. This is because vppctl
depends on seeing traffic before it will try to close the
session; a command with no output would cause it to hang.
NUL bytes are ignored by all decent terminals, but we have
vppctl strip them out anyway.
- Prevent certain commands from running in non-interactive
sessions since they manipulate interactive-related features.
- For interactive sessions, quench the prompt that prints on
VPP shutdown.
- Detect and handle socket errors in the CLI; sessions were
leaking.
- Pevent SIGPIPE from ever being raised; handle EPIPE instead.
We don't need VPP to die just because a socket closed just
before we try to write to it!
- Add a command to dump a list of current CLI sessions; mostly
this was to detect session leakage, but it may have some
general utility.
Change-Id: Ia147da013317180882c1d967b18eefb8519a55fb
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
Change-Id: Ibcd2cf22348ae5a72770a8f8ad25cbe8df7fd390
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Ie3a99f09f44ec081d9b88a213bdb8d987fb462de
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Iedcea2fb45052852666b91a21eed011f5593313d
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Ib5d335d6130617d6135615c6c8fa8deaac971331
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
When one starts VPP, types a command, presses up rather than enter,
then types a new command, unix_cli_line_process_one() segfaults.
This is due to cf->cursor not being reset upon pressing up if the
history is empty.
Change-Id: Ie503f20a9cb551e735abb8b0f4feb8c0006d2b61
Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
|
|
When given a single IPv6 address, the "tcp src-address" command incorrectly
infers the end of the range by copying sizeof(ip4_address_t) bytes from the
given address.
Change-Id: I100d5c6674d3a3980b8c018588988bdd32ff7269
Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
|
|
Until now, if the stack didn't find a connection for a packet, it sent
back a reset. With the punt option enabled, packets are now enqueued to
error-punt where they can be handed off to the host os.
Change-Id: I12dea8694b8bd24c92b0d601412928aa7b8046cb
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
Fix dhcp_client_for_us() function to utilize rpc_call_main_thread
to call vlib_process_signal_event() to ensure proper handling
irrespective of it being called in main thread or worker thread.
Added ASSERT to vlib_process_sinal.. path to make sure it is called
in main thread.
Change-Id: I4109cc049d8e4225d896ce492ce201011dc9c911
Signed-off-by: John Lo <loj@cisco.com>
|
|
ip4-local feature arc existed but not ip6-local one.
This patch also adds node name to the 'show ip local' command and fixes
a minor include issue in vnet/ip/ip4.h file.
Change-Id: I9bb8a7159917d58f89afcce974680de20d946a70
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
Change-Id: Id98b523f7b20f82291a34e73762978fa65e24140
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I41a51bb36e31e05c76fef0b34fe006afbee27729
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
There isn't anything useful to print. Return a unique name since the
unix cli uses the returned string to create a node name. Node names
must be unique, or vpp will quit abruptly.
Change-Id: I8f85ae8fececdbfd26c729bc32c2c2007c06d1ea
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Iff634f22d43470e2dc028387b3816257fd7b4156
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
- add preallocated segment flag
- don't remove pre-allocated segments except if application detaches
- when preallocating fifos in multiple segments, completely fill
a segment before moving to the next
- detach server application from segment-managers when deleting app
- batch syn/syn-ack/fin (re)transmissions
- loosen up close-wait and time-wait times
Change-Id: I412f53ce601cc83b3acc26aeffd7fa2d52d73b03
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I831226111d26f5c8a795e0773e23fddcddfb1613
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I0f1a051dd3b5786dc7c457bc6fc7ce4fcd0f530c
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
For routed IPsec, set the RX sw_if_index on inbound packets
to the index of the IPsec interface. When a packet is
decrypted into a new buffer, bring along the RX sw_if_index
of the encrypted packet to the new buffer.
Change-Id: I093e9d37def2082c8d2f1deb96b1c5b97126e023
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: I1f3c0f879f636e587aa518c41e5ad99af65129a7
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I717ce3cd7c867c155de149ec56623269d26d0ff7
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Checksum offload is implemented in VXLAN encap over both IPv4 and
IPv6. It is enabled, however, only for VXLAN over IPv6 because UDP
checksum is needed only for IPv6 and optional for IPv4.
Change-Id: Ib879f4f6da7346ba5e079d321c1dfd630f5058b8
Signed-off-by: John Lo <loj@cisco.com>
|
|
Plus fixed problem with acl heap.
Change-Id: I3d91db549ebe4595f1dab9b8780f90722540024b
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
Change-Id: Ifda4d22c9d1de210165932a0996f75cc8428ae7a
Signed-off-by: Alberto Rodriguez-Natal <natal@cisco.com>
|
|
177117: fstat() returns -1 on error; the code is
checking for any positive value instead
175142: final return could never be reached; simple
refactoring
175235,175236: Warning suppressed with an explicit
cast to (void)
174817: Final return couldn't be reached; is
is_in_order is 0 then 'rv' is already returned
above
172095,172093: If is_is_set does not get set to 1,
then return 0 has already been invoked
174405: Re-kill this (nothing sets rv)
171136: Looks like a cmd line flag to set test_bytes
was missing; added it, and refactored the
argc/argv processing to avoid two other
potential segv's
176813: Add range checking for term width/height.
First stab at a reasonable range is 1-512
for both.
175350: Fix implicit casting in shift operation
174272: Not a c+p error; try using a coverity
annotation to ignore it
174273,175320: Annotated FORWARD_NULL
Change-Id: I58d0f860fc2209f59f8d1b6b344d631b8d429ace
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
previous mechanism was emitting duplicates of last event, when handling multiple arp queries.
tests:
* arp events sent for graps
* duplicate suppression
* verify no events when disabled
Change-Id: I84adc23980d43b819261eccf02ec056b5cec61df
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Fix coverity CIDs 176805, 176806, 176811, 176812
Change-Id: I73591c922307e7a98d38d5d92ebf37c8b2ff0145
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
- Existing Vagrantfile is symbolic link to the
default Vagrantfile.
- In order to run the multi-host vcl test,
change Vagrantfile -> Vagrantfile.vcl_test
- Fix socket_test.sh & vppcom bugs.
Change-Id: I965b7f799135c86e989c08bf6c5909677ef38dea
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|