summaryrefslogtreecommitdiffstats
path: root/src
AgeCommit message (Collapse)AuthorFilesLines
2018-03-19QoS: publish qos.api.h fileMatus Fabian1-0/+3
Change-Id: Ice041610c23563ead13019216516aff23b7775b9 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-03-19IPIP: Fix coverity error.Ole Troan1-0/+3
Change-Id: Ia2b3350bf8e2c72eee3f33936ba16dd817c75c72 Signed-off-by: Ole Troan <ot@cisco.com>
2018-03-19FIX: Fixed ip6_fib_dump api function response.Dmitry Vakhrushev3-1/+9
Change-Id: I26c5d61bc2f6188bcd4ecac4b5e9385821b0398b Signed-off-by: Dmitry Vakhrushev <dmitry@netgate.com>
2018-03-18Remove unnumbered configuration on interface deleteNeale Ranns6-80/+68
Change-Id: Iae5532c3d53e208831f3b2782242d9e59d367087 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-16cli: make q work againFlorin Coras1-0/+8
After the addition of "qos" cli, "quit" command is not the only match for "q". Therefore, add a separate "q" cli to avoid ambiguity. Change-Id: I84f6ddce14ef7d5fa7089537cb62adfecea0e501 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-16QoS recording and markingNeale Ranns22-18/+1644
Change-Id: Ie5a50def4ec1e4a3b3404a8b6ab9ec248bc16744 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-16Fix a long-latent bi=0 bug in vlib_buffer_add_dataDave Barach3-4/+4
Change vlib_buffer_add_data() so it interprets ~0 to mean please allocate a new buffer, instead of 0. Fixed a couple of calls to pass ~0 instead of 0. Zero has always been a valid buffer index, we never happened to actually use it until recent buffer allocator changes. The presenting symptom: ASSERT failure when running "make TEST=test_mpls test-debug" Change-Id: Ic909913c1d464b3434d6d47e0c58f978806854d5 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-16IPv6 ND Router discovery control plane (VPP-1095)Juraj Sloboda6-1/+1032
Change-Id: I4b5b60e7c6f618bb935eab1e96a2e79bbb14f58f Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-03-16stats: allow configuring poller delayKlement Sekera4-19/+126
This introduces a startup config option for configuring stats poller delay. Use `stats { interval <seconds> }` to configure the delay at startup. The default value remains unchanged - 10 seconds. Change-Id: If12cb1f7f6f1f8ecfa461561bc77847cdf260388 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-16IPSec: fix IPv6 policy deletingMatus Fabian1-1/+1
Change-Id: I9f487d6033edde09557709f94f97fc8a70246b09 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-03-16Fix sample-plugin build on ubuntu 18.04Damjan Marion1-1/+0
Change-Id: Ia10aadc7f969b20e8cd50989230a80e7e21cbff4 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-03-16IPv6 ND Router discovery data plane (VPP-1095)Juraj Sloboda5-6/+615
Add API call to send Router Solicitation messages. Save info from incoming Router Advertisement messages and notify listeners. Change-Id: Ie518b5492231e03291bd4c4280be4727bfecab46 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-03-16session: allow local host bindsFlorin Coras1-4/+4
Change-Id: I906bbc5bc75279f210093fb9276db9e35ee44c1f Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-15Update session local address is_ip4 on bind when not globalKeith Burns (alagalah)1-0/+1
Change-Id: I73ddca5a86e83c9f547778828bb49d2bd4675eaf Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2018-03-15tls: add openssl engineFlorin Coras14-190/+1027
Change-Id: I6c215858d2c9c620787632b570950b15274c0df2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-15Add a helper function to fetch vlib node index for already stacked dposVijayabhaskar Katamreddy2-0/+40
Change-Id: Ie07c6f3723312ce88046570dcbe591b72724657b Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
2018-03-15use system provided ccache linksDamjan Marion1-6/+6
Change-Id: I0860bbd0cf368fc3638b861504ebf642ee9d3807 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-03-14IPIP: Also publish the ipip.api.h file.Jon Loeliger1-0/+1
Change-Id: I0b1237db541b752393483496ea19dec55799454e Signed-off-by: Jon Loeliger <jdl@netgate.com>
2018-03-14Clean up vpp build bootstrap stepDave Barach2-9/+10
Net of rewriting vppapigen in python-ply, there's no need to compile vppinfra. Install a copy of vppapigen in .../build-root/tools/bin, so the sample plugin build will work. Rationalize suffix-rules.mk. Add clang, clang++ links to .../build-root/ccache-bin. Change-Id: Ib4017848b7767b6054238ea544ee5319667c3659 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-14vlib: internal buffer manager reworkDamjan Marion8-284/+190
- buffer_main is no longer part of vlib_main_t - pool of free lists is still part of vlib_main_t - mheap is not used anymore for buffer allocation - simple bitmap bassed buffer alloc scheme is introduced Change-Id: I3e1e6d00e2c8122293ed0a741245eb841315a1ff Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-03-14Prevent calling rte_eth_xstats_get not initialized devSzymon Sliwa1-0/+2
DPDK API forbids calling rte_eth_xstats_get on a port which has not been setup up yet. Citing the DPDK docs (reformated): " The functions exported by the application Ethernet API to setup a device designated by its port identifier must be invoked in the following order: rte_eth_dev_configure() rte_eth_tx_queue_setup() rte_eth_rx_queue_setup() rte_eth_dev_start() Then, the network application can invoke, in any order, the functions exported by the Ethernet API to get the MAC address of a given device, to get the speed and the status of a device physical link, to receive/transmit [burst of] packets, and so on. " original can be found here: http://dpdk.org/doc/api/rte__ethdev_8h.html#a36ba70a5a6fce2c2c1f774828ba78f8d Change-Id: I91854b8b0dd12dd028b4b36665cca49f16eac24c Signed-off-by: Szymon Sliwa <szs@semihalf.com>
2018-03-14IPIP: Add IP{v4,v6} over IP{v4,v6} configured tunnel support.Ole Troan19-1112/+2188
Change-Id: I166301c9e2388bae5f70ec0179d663a2703e27f5 Signed-off-by: Ole Troan <ot@cisco.com>
2018-03-14VCL: Handle epoll HUP events in sock_test_serverDave Wallace1-1/+10
Change-Id: I7b13319228c498a565f8556b73628e7ff3b106c4 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-03-14srv6-plugins: fixing documentationFrancois Clad4-201/+254
Change-Id: I72439df585e56b3cbb7051f056fc35cddf0c864b Signed-off-by: Francois Clad <fclad@cisco.com>
2018-03-14srv6: minor CLI modificationsFrancois Clad4-15/+14
'sr steer [...] via sr policy [...]' -> 'sr steer [...] via [...]' 'show sr steering policies' -> 'show sr steering-policies' 'clear sr localsid counters' -> 'clear sr localsid-counters' Change-Id: I0efbf38753a4bd0b7fba8cd08250e136e8e55199 Signed-off-by: Francois Clad <fclad@cisco.com>
2018-03-14Improve l2_macs_events API to provide MAC move informationJohn Lo5-10/+24
Change mac_entry layout in l2_macs_event API message so the MAC entry can be either add, delete or move where the sw_if_index of an existing MAC entry changed. Also added a 8-bit flags field in mac_entry for any future expansion. Change-Id: I3bf9e1cf2556f2938202025a5d0772c2ce2fc99f Signed-off-by: John Lo <loj@cisco.com>
2018-03-14VOM: acl: Add support for acl ethertype unbind and dumpMohsin Kazmi3-1/+182
Change-Id: I667b9ccabe54c8f9cff5b1a2e63864965f5064f5 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-03-14At AF_PACKET socket create, do intf bind before rx ring cfg to avoid ↵Chaoyu Jin1-12/+12
receiving pkts from other interfaces Change-Id: Ie40ee9129edaac717e716b469f4d10f3c29a4932 Signed-off-by: Chaoyu Jin <chjin@cisco.com>
2018-03-13VCL: Fix race condition in event thread functionDave Wallace1-11/+17
Change-Id: I8586faee0b3a40932cd711b60cebe1a23ff82a56 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-03-13SCTP: data retransmission & snd_space fixMarco Varlese3-4/+88
This patch addresses two things: 1) The data retransmission which needs to be taken care of when the SCTP_TIMER_T3_RXTX; 2) The correct calculation of the amount of data transmittable considered: the local window, the peer window and any data inflight. Change-Id: I2d03a6cb43e4e7770c4910f8547c66e1026aeace Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-03-13Common form of fib-path reproting in dumpsNeale Ranns10-130/+321
Change-Id: I8f6fdbbeef2ac7e9fe5d87490ae5cba6e9a0b294 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-13FIB: DVR paths are not considered L3 attachedNeale Ranns1-0/+10
Change-Id: Ie473dca3264b480b007d2eb500aaa557b889c7c1 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-03-13Rationalize plugin symbol error reportingDave Barach3-5/+14
Change-Id: I64f2b2007f30fc1c6bd2990ba0d7ccbcd43cdb38 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-13SCTP: cumulative SACK fixMarco Varlese4-15/+44
A bug was found affecting the cumulative sending of SACK messages. Because the next0 was never assigned to the next_output the SACK message was never leaving the peer. Further, two new flags have been added to distinguish when a peer is AWAITING a SACK message (e.g. DATA is inflight and waiting to be acknowledged). Change-Id: Ibb5a98f7e5fed15cdc76710b74195cac031d59ed Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-03-12SPAN: Add 'is_l2" flag to DETAILS response messages.Jon Loeliger3-2/+7
Change-Id: I375bb0e663bc082d98a29fb101c653557ddc8f55 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2018-03-12Remove md5.[ch] from vppinfraDave Barach5-535/+2
Removed the sole use of it from ip6_neighbor.c Change-Id: Ie53cb3b6a3a41ec0917ec2042e5006d0cfaefc01 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-12License text cleanupDave Barach1-0/+13
Change-Id: I105375c653b1a1dce8f0f71005b281ff137c6f42 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-12NAT44: fix nat_not_translate_output_feature in dual loop (VPP-1194)Matus Fabian1-2/+2
Change-Id: Icb858414145db0e5fef495e155903b3b935e50ba Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-03-12NAT44: fix nat_not_translate_output_feature for ICMP (VPP-1191)Matus Fabian1-8/+7
Change-Id: I1552e1418b704fdf1f1fa2c0174313b9b82a37a3 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-03-11vnet: l2-classify: prefetch (n+2, n+3) rather than (n+1, n+2) inside dual ↵Andrew Yourtchenko2-10/+10
loop code The dual loop within the L2 classifier processes the (n, n+1) packets, the prefetching was trying to prefetch (n+1, n+2) - thus half of the prefetches were not used - because the next iteration needs (n+2, n+3). Change-Id: I827d20845dbdd0dcdcf463ee25661a7921428992 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-03-11dpdk-input node packet trace intermittent on IP forwading pathJohn Lo1-36/+37
Packet trace initiated by dpdk-input node would occasionally not fully function if next node is ip4-input. Change packet trace saving order in the quad-loop so "sho trace" will display trace in packet receive order. Fold calling of vlib_trace_buffer() into dpdk_add_trace(). Change-Id: I9d7a9bf3b9391f95590e66150b26b0b15912d803 Signed-off-by: John Lo <loj@cisco.com>
2018-03-10Move the vnet cdp protocol implementation to a pluginDave Barach15-41/+574
Add a binary API and debug cli to enable/disable cdp. cdp is disabled by default. Change-Id: I307c7e38dfda38e36ff3325f65de7036c34d89b1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-09Coordinate known Ethernet speeds with Linux kernel and DPDKLee Roberts5-6/+77
Linux kernel and DPDK recognize the following Ethernet speeds: 10M, 100M, 1G, 2.5G, 5G, 10G, 20G, 25G, 40G, 50G, 56G and 100G. Add consistent Ethernet speeds to VPP. Change-Id: I4cfcf378fb34425c1206db5aa2f6bdcc66e0a6ab Signed-off-by: Lee Roberts <lee.roberts@hpe.com>
2018-03-09Correct address calculation for VPP-1168Lee Roberts2-2/+2
Use (u64) cast to ensure proper address calculations. Change-Id: I6bad50010b140189f1b0af177e55da0045bd7a93 Signed-off-by: Lee Roberts <lee.roberts@hpe.com>
2018-03-09VCL API for external callback for listener/connect eventKeith Burns (alagalah)7-23/+323
Change-Id: Ic59355683b581945d10a2df97d9b2deae87a998e Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2018-03-09dpdk: move DPDK vfio hack to dpdk pluginDamjan Marion4-50/+70
Change-Id: I806cbf8c6c49643fe6c317bcceab93c1b9d441ab Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-03-09VCL: add event registration to listen session in select()Dave Wallace1-5/+27
Change-Id: Ie2e8f4ec3a7ec1018e5f9ca6f28f8cb18beaa814 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-03-09when exceed max reass,ahdj0071-6/+12
frag packet can't get reass. adding bihash,it can rewrite new hash value. so need to delete hash after compare hash value. Change-Id: I83b5c47890110e9a598b78cfbe8fcd27bbe291bb Signed-off-by: ahdj007 <dong.juan1@zte.com.cn>
2018-03-09MPLS Unifom modeNeale Ranns40-599/+1754
- support both pipe and uniform modes for all MPLS LSP - all API programming for output-labels requires that the mode (and associated data) is specificed - API changes in MPLS, BIER and IP are involved - new DPO [sub] types for MPLS labels to handle the two modes. Change-Id: I87b76401e996f10dfbdbe4552ff6b19af958783c Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-09ACL: Fix the detail for ethertype whitelistMohsin Kazmi2-3/+3
Change-Id: Ie8b4effbd25e1e26b625d451ec059bac58a5a5a1 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>