summaryrefslogtreecommitdiffstats
path: root/src
AgeCommit message (Collapse)AuthorFilesLines
2017-10-06VCL: add epoll_* functions.Dave Wallace4-85/+813
Change-Id: Ife27795ea96919c116fb6ff33d106663b54df72d Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-10-06tuntap: Introduce per thread structure to suport multi-threadsSteven2-65/+99
https://gerrit.fd.io/r/#/c/8551/ decoupled the global variable, namely tm->iovecs from TX and RX. However, to support multi-threads, we have to eliminate the use of this global variable with per thread variable. I notice that rx_buffers must also be per thread variable. So, we introduce per thread struct to contain rx_buffers and iovecs. Each thread will find the per thread struct with thread_index. Change-Id: I61abf2fdace8d722525a382ac72f0d04a173b9ce Signed-off-by: Steven <sluong@cisco.com>
2017-10-06Initial GENEVE TUNNEL implementation and tests.Marco Varlese16-2/+4265
Notes on this first implementation: * First version of the implementation does NOT support GENEVE OPTIONS HEADER: it isn't well understood what the purpose of the OPTIONS will be and/or what content would be placed in the variable option data; Once the IETF work will evolve and further information will be available it could be possible to modify the frame rewrite to contemplate the actual GENEVE OPTIONS. Change-Id: Iddfe6f408cc45bb0800f00ce6a3e302e48a4ed52 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2017-10-06Separate CP and DP fib table for PPPoEHongjun Ni3-56/+66
CP table: link_table DP table: session_table Change-Id: I2adbfd8f6a63d51d00d6dd291f32aebf20d13e4d Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2017-10-05dpdk/ipsec: rework plus improved cli commandsSergio Gonzalez Monroy14-1702/+2522
This patch reworks the DPDK ipsec implementation including the cryptodev management as well as replacing new cli commands for better usability. For the data path: - The dpdk-esp-encrypt-post node is not necessary anymore. - IPv4 packets in the decrypt path are sent to ip4-input-no-checksum instead of ip4-input. The DPDK cryptodev cli commands are replaced by the following new commands: - show dpdk crypto devices - show dpdk crypto placement [verbose] - set dpdk crypto placement (<device> <thread> | auto) - clear dpdk crypto placement <device> [<thread>] - show dpdk crypto pools Change-Id: I47324517ede82d3e6e0e9f9c71c1a3433714b27b Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2017-10-05Clean up "show api ring" debug CLIDave Barach2-4/+15
Add a primary svm_region_t pointer to the api_main_t so we can always find the primary region, even when processing an API message from a memfd segment. Change-Id: I07fffe2ac1088ce44de10a34bc771ddc93af967d Signed-off-by: Dave Barach <dave@barachs.net>
2017-10-05Distributed Virtual Router SupportNeale Ranns13-109/+545
A distributed virtual router works by attmpeting to switch a packet, but on failing to find a local consumer (i.e. the packet is destined to a locally attached host) then the packet is sent unmodified 'upstream' to where the rest of the 'distributed' router is present. When L3 switching a packet this means the L2 header must not be modifed. This patch adds a 'l2-bridge' object to the L3 FIB which re-injects packets from the L3 path back into the L2 path - use with extreme caution. Change-Id: I069724eb45956647d7980cbe40a80a788ee6ee82 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-04[aarch64] Fixes CLI crashes on dpaa2 platform.Christophe Fontaine74-130/+130
- always use 'va_args' as pointer in all format_* functions - u32 for all 'indent' params as it's declaration was inconsistent Change-Id: Ic5799309a6b104c9b50fec309cba789c8da99e79 Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
2017-10-04Set MAC address needs the HW interface indexNeale Ranns2-2/+6
Change-Id: I7b175d57b85e626aab00221b6dac0498aebcbeae Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-04dpdk: use vpp physmem allocator for dpdk buffersDamjan Marion2-63/+144
This allows us to have single contignuous allocation for DPDK buffers with single mmap FD, so buffer memory can be easily shared with diffrent process. As a consequence dpdk socket-mem is no longer in charge for allocating buffer memory, but still we need some space allocated for dpdk structures so default socket-mem is reduced form 256 to 64 MB. For a default of 16K buffers per numa node, physmem allocation is now 40MB, so basically this change reduces footprint from 256MB per socket to 48 (64 + 40). Change-Id: Ic8cfe83930a18411545b37a12b14aac89affd04f Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com> Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-10-04Dump of deag/lookup routes has is_drop=1 (VPP-995)Neale Ranns1-0/+2
Change-Id: I58772a83e22885a9ea8a7a981d2bcb4b31a050d2 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-04memif: crash on slave modeSteven1-0/+1
Crash was seen on recent image with this BT on top of the stack (gdb) bt full (mif=0x7fffb6226568) at /vpp/build-data/../src/plugins/memif/memif.c:297 ring = 0x0 <<<<<<<<<< i = 0 j = 0 buffer_offset = 65792 r = 0x7fffb5e59f80 alloc = {flags = 1, name = 0x7fffb449f965 "memif region", size = 4260096, numa_node = 0, addr = 0x7fff41dac000, fd = 11, log2_page_size = 12, n_pages = 1041} err = 0x0 __FUNCTION__ = "memif_init_regions_and_queues" The crash happened at this line. ring = memif_get_ring (mif, MEMIF_RING_S2M, i); ring=>head = ring->tail = 0; <===== Please note that the crash is caused by dereferencing NULL rinng. Put breakpoint into the function. I notice that mif->regions[0].shm is not initialized. (gdb) p mif->regions[0].shm $8 = (void *) 0x0 It looks like we forgot to set shm after clib_mem_vm_ext_alloc(). Add the missing cide and the crash is fixed. Change-Id: Ib722a6c241c77acfa8e33962106b57faa50e1ea7 Signed-off-by: Steven <sluong@cisco.com>
2017-10-04VPP-1001 - update AF Packet Driver to for modern kernelsAnton Ivanov4-10/+119
1. Add VNET headers support for checksumming - required to operate correctly on any recent Linux 2. Bypass QDISC on transmit - improves performance by ~ 5%. Enabled only if the macro is detected - apparently not present on archaic distributions. This still does not solve all issues with TSO - it can be fixed only by going to tpacket v3 and dynamic rx ring as well as significant changes in the TX (sendmmsg?). Change-Id: Iea14ade12586c0a8da49e6dd1012108a08bc85b3 Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
2017-10-04Add API support to dump IPsec SAsMatthew Smith3-0/+292
Add an API request message type to dump IPsec SAs. Either all IPsec SAs can be dumped or it can be limited to a single SA ID (numeric ID set at creation time - not an index). Add a handler for incoming messages with the new request type. Add an API response message type containing the data for an IPsec SA. Add VAT support for new message type. Change-Id: Id7828d000efc637dee7f988a87d3f707a8b466b7 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2017-10-03api: fix internal client registrationsFlorin Coras1-0/+2
Makes sure vlib_rp and shmem_hdr are initialized for internal registrations. They are needed for keepalive msg exchanges. Change-Id: I805dec2d2aa84b1efdc1fdd692fc1d94389b776e Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-10-03Update L2FIB entry timestamp only if BD aging enabled (VPP-1002)John Lo3-3/+6
Change L2 learning path so it update stale timestamp in MAC entry only if aging is enabled on the BD for the MAC entry. Change-Id: I7babe986ceef3c030d8ef9185076c42b405f7b0f Signed-off-by: John Lo <loj@cisco.com>
2017-10-03tcp: updates to connection closing procedure (VPP-996)Florin Coras4-17/+63
- add separate TIME_WAIT time constant - fix output node for TIME_WAIT acks - ensure snd_nxt is snd_una_max after retransmitting fin - debugging improvements Change-Id: Ic947153346979853f2526824b229126e47aead86 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-10-03jvpp: added logs for sending and receiving event messages (VPP-982)Matej Perina5-0/+30
Change-Id: I47f9d12d934378f18c6f841b902af2a64ee7b187 Signed-off-by: Matej Perina <mperina@cisco.com>
2017-10-03Repair vlib API socket serverDave Barach87-1104/+2510
- Teach vpp_api_test to send/receive API messages over sockets - Add memfd-based shared memory - Add api messages to create memfd-based shared memory segments - vpp_api_test supports both socket and shared memory segment connections - vpp_api_test pivot from socket to shared memory API messaging - add socket client support to libvlibclient.so - dead client reaper sends ping messages, container-friendly - dead client reaper falls back to kill (<pid>, 0) live checking if e.g. a python app goes silent for tens of seconds - handle ping messages in python client support code - teach show api ring about pairwise shared-memory segments - fix ip probing of already resolved destinations (VPP-998) We'll need this work to implement proper host-stack client isolation Change-Id: Ic23b65f75c854d0393d9a2e9d6b122a9551be769 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-10-03Propagate duplicate IF addr add/del error up to API.Jon Loeliger3-8/+30
Identify and complain when the same IP prefix is assigned to two different SW interfaces: vpp# set int ip address TenGigabitEthernet6/0/0 1.2.3.4/32 vpp# set int ip address TenGigabitEthernet6/0/1 1.2.3.4/32 set interface ip address: Prefix 1.2.3.4/32 already found on interface TenGigabitEthernet6/0/0 Change-Id: I1aee1b6a7ddd00d3109a53d8e1b6ce97bf45e372 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-10-02L2-FIB:add mac learn events testEyal Bari1-56/+49
fixes an issue where events were not sent if BD doesn't enable mac aging Change-Id: Iddc53cb5c45e560633e6c5cff2731dccfc70ad5b Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-09-28cdp/lldp: punt for no bufferSteven2-0/+6
When making a call to vlib_packet_template_get_packet(), it is possible to get back a NULL if the system runs out of buffer. This can happen when there is buffer leaks. But don't crash just because we run out of buffers, just punt. Change-Id: Ie90ea41f3dda6e583d48959cbd18ff124158d7f8 Signed-off-by: Steven <sluong@cisco.com>
2017-09-28C++ API: remove deprecated throw listsKlement Sekera1-8/+4
Change-Id: Ia58664438c9dc949884a794bd123555a13a02e6c Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-09-28drop python3 dependencyKlement Sekera3-22/+25
Change-Id: I99c2c1d0d5b96f33efdb58dd3a2897a752e65349 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-09-27Update package versionFlorin Coras1-1/+1
Change-Id: Ic9bc303b65c95a0e06f90c75b067056b0b11e654 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-28General documentation updatesChris Luke3-40/+45
- We now have several developer-focused docs, so create an index page for them. - Rework several docs to fit into the index structure. - Experiment with code highlighting; tweak the CSS slightly to make it slightly nicer to look at. Change-Id: I4185a18f84fa0764745ca7a3148276064a3155c6 Signed-off-by: Chris Luke <chrisy@flirble.org>
2017-09-28tun/tap: Bad packets sent to kernel via tun/tap interfaceSteven2-22/+29
It was observed that under heavy traffic, VPP accidentally sent traffic with the wrong source and destination to the tun/tap interface. Traffic appears to be sent to the wrong direction. This problem is only seen when worker thread is configured. When worker thread is used, TX and RX may reside in different core. Yet both TX and RX threads are sharing the same global variable, namely iovecs without any mutex or memory barrier protection. This creates a race condition when heavy traffic is blasted to VPP, like 1000 pps. We could create a mutex or memory barrier to ensure atomic memory access. But why bother? It is a lot cheaper to just decouple the iovecs such that TX and RX have their own iovecs. Change-Id: I86a5a19bd8de54d54f32e1f0845bae6a81bbf686 Signed-off-by: Steven <sluong@cisco.com>
2017-09-27VPP-990 remove registered handler if control ping failsv18.01-rc0Matej Perina3-0/+14
Change-Id: I5ca5763f0dc0a73cc6f014b855426b7ac180f356 Signed-off-by: Matej Perina <mperina@cisco.com>
2017-09-27LISP: add API handlers for set/get transport protocolFilip Tehlar4-0/+194
Change-Id: Ib675164c475edcdbe3013df7b847adf5e050c53f Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-09-27VLAN support on host(af-packet) interface.Akshaya N1-3/+26
On host interface if a VLAN tagged packet is received, linux kernel removes the VLAN header from packet byte stream and adds metadata in tpacket2_hdr. This patch explicitely checks for the presense of VLAN metadata and adds it in VPP packet. Change-Id: I0ba35c1e98dbc008ce18d032f22f2717d610c1aa Signed-off-by: Akshaya N <akshaya@rtbrick.com>
2017-09-27Fix: unnecesary uio binding for Mellanox NICSteve Shin1-1/+3
UIO binding is not required for Mellanox NIC and calling vlib_pci_bind_to_uio() should be skipped. Change-Id: I10ea457bc3c8d4be8117dec51d5bd940ee416a44 Signed-off-by: Steve Shin <jonshin@cisco.com>
2017-09-27Various fixes for issues found by Coverity (VPP-972)Chris Luke5-3/+25
174267: Revisit this string termination issue 174816: Add check for NULL when trace is enabled 177211: Add notation that mutex is not required here 177117: Added check for log2_page_size == 0 and returns an error if so 163697,163698: Added missing sw_if_index validation Change-Id: I5a76fcf6505c785bfb3269e353360031c6a0fd0f Signed-off-by: Chris Luke <chrisy@flirble.org>
2017-09-27acl-plugin: take 2 at VPP-991 fix, this time with a test case which verifies it.Andrew Yourtchenko1-2/+2
The replacement of [] with pool_elt_at_index and subsequent fixing it was incorrect - it was equivalent to &[], since it returns a pointer to the element. I've added VPP-993 previously to create a testcase, so this commit partially fulfills that one as well. Change-Id: I5b15e3ce48316f0429232aacf885e8f7c63d9522 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-09-26tcp: update snd_nxt after congestion recoveryFlorin Coras2-9/+7
Change-Id: I2cf4c4850b9c3c093a7dce0cec89b9f710f69393 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-26Add thread-safe event signaller, use RPC where requiredDave Barach5-5/+73
Update ping code to use the new function Change-Id: Ieb753b23f8402cbe5667c22747896784c8ece937 Signed-off-by: Florin Coras <fcoras@cisco.com> Signed-off-by: Dave Barach <dave@barachs.net>
2017-09-26NAT: remove worker_by_in lookup hash table (VPP-992)Matus Fabian4-97/+30
Change-Id: I3873d3e411bf93cac82e73a0b8e3b22563aaf217 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-09-26Memory overwritten when using unformat %u (VPP-987)Aequitas3-19/+19
Change-Id: I7d8f807fb502d61688aa1dee25fa4edcbeb32f41 Signed-off-by: Aequitas <wang.junqi@zte.com.cn>
2017-09-25tcp: do not sample rtt for retransmitted segmentsFlorin Coras3-81/+100
Change-Id: I365c31607332a944ef498369881332b515894ed7 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-25acl-plugin: use vec_elt_at_index rather than pool_elt_at_index to access ↵Andrew Yourtchenko1-2/+2
vector elements bb7f0f644 aimed to fix the coverity issue has incorrectly replaced the previous [] access with pool_elt_at_index(), for an element of a vector, with predictably interesting result. VPP-991 has uncovered the issue. Change-Id: Ifd3fb70332d3fdd1c4ff8570372f394913f7b6c8 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-09-25Fix usage string for vatJerome Tollet1-1/+2
Change-Id: Idad65cbb3765500a66f1097126076a2c5fdb4f1b Signed-off-by: Jerome Tollet <jtollet@cisco.com>
2017-09-25Fix sending GARP/NA on Bonded Interface Active/Backup Link Up/DownJohn Lo5-72/+101
For bonded interface in Active/Backup mode (mode 1), we need to send a GARP/NA packet, if IP address is present, on slave link state change to up or down to help with route convergence. The callback from DPDK happens in a separate thread so we need to make sure RPC call is used to signal the send_garp_na process in the main thread. Also need to fix DPDK polling so the slave links are not polled. Change-Id: If5fd8ea2d28c54dd28726ac403ad366386ce9651 Signed-off-by: John Lo <loj@cisco.com>
2017-09-25Add binary API documentationDave Barach3-71/+474
Change-Id: Id1a5da12b13d87bacfa81094f471b95db40c39be Signed-off-by: Dave Barach <dave@barachs.net>
2017-09-25NAT: session number limitation to avoid running out of memory crash (VPP-984)Matus Fabian4-38/+120
Change-Id: I7f18f8c4ba609d96950dc1f833feb967d4a099b7 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-09-22Fix vpp "unix interactive" when running under emacs + gdbDave Barach1-3/+8
In this specific corner-case setup, ioctl (0, TIOCGWINSZ) returns window height = 0 and width = 0. Rather than declaring the terminal to be non-interactive, set the window size parameters to 80 x 24. Change-Id: If66f5f0883f1940518ec1c6e26228c9bb6f32852 Signed-off-by: Dave Barach <dave@barachs.net>
2017-09-22vhost-user: fix link-up statusYoann Desmouceaux1-1/+1
When changing the admin state of a vhost-user interface, do not put it in link-up mode if the interface is not actually ready. Change-Id: Idbc631a7126efa79d199909f9e7656d21bd412ca Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
2017-09-22acl-plugin: remove the clib_warning "ACL enabling..."Andrew Yourtchenko1-4/+0
It was useful for debugging once upon a time... but time to say goodbye to it... Also remove the warning printed when sending ACL details. Change-Id: I43b2537e176556831eb7ff34b25c9068aa05ee27 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-09-22IP-MAC,ND:wildcard events,fix sending multiple eventsEyal Bari6-101/+216
wildcard ND events publisher was sending the last event mutiple times Change-Id: I6c30f2de03fa825e79df9005a3cfaaf68ff7ea2f Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-09-21vppctl,cli: Improve non-interactive vppctl (VPP-944)Chris Luke2-89/+404
Short version: Make vppctl behave as expected when run from scripts, or without a controlling terminal, and especially when using it with VPP commands on its command line ("non-interactively"). In particular, prevent the welcome banner and VPP CLI prompt from being sent by VPP when being used in these ways. vppctl ------ - Improve vppctl's detection of non-interactive sessions. - Pass non-interactiveness in the terminal type telnet option as a value distinct from "dumb" (which means non-ANSI capable.) - Make tty setup handling more robust. - Only send non-interactive command once we've sent the terminal type, to ensure correct event sequence; we need the VPP cli session to be in line-by-line mode. - Ignore stdin when it looks something like /dev/null. - Skip NUL bytes received from VPP. VPP CLI ------- - Detect "non-interactive" terminal types and set session parameters accordingly. - Add an "interactive" flag that controls whether the welcome banner and CLI prompt are sent. - Detect if telnet options processing switched us into line mode and act accordingly for the rest of the current input buffer. This was causing the command string to be echoed by the CLI editor code. - For non-interactive sessions, send a NUL byte after the input buffer has been processed. This is because vppctl depends on seeing traffic before it will try to close the session; a command with no output would cause it to hang. NUL bytes are ignored by all decent terminals, but we have vppctl strip them out anyway. - Prevent certain commands from running in non-interactive sessions since they manipulate interactive-related features. - For interactive sessions, quench the prompt that prints on VPP shutdown. - Detect and handle socket errors in the CLI; sessions were leaking. - Pevent SIGPIPE from ever being raised; handle EPIPE instead. We don't need VPP to die just because a socket closed just before we try to write to it! - Add a command to dump a list of current CLI sessions; mostly this was to detect session leakage, but it may have some general utility. Change-Id: Ia147da013317180882c1d967b18eefb8519a55fb Signed-off-by: Chris Luke <chrisy@flirble.org>
2017-09-21NAT: remove worker_by_out lookup hash table (VPP-989)Matus Fabian3-133/+120
Change-Id: Ibcd2cf22348ae5a72770a8f8ad25cbe8df7fd390 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-09-20session: store tep port in net orderFlorin Coras4-14/+14
Change-Id: Ie3a99f09f44ec081d9b88a213bdb8d987fb462de Signed-off-by: Florin Coras <fcoras@cisco.com>