summaryrefslogtreecommitdiffstats
path: root/src
AgeCommit message (Collapse)AuthorFilesLines
2018-02-08add CLIB_HAVE_VEC128 with NEON intrinsics (VPP-1127)Gabriel Ganne3-9/+65
Enable CLIB_HAVE_VEC128 if both aarch64 and __ARM_NEON ie. armv8 only, not armv7 Add more neon compare intrinsics wrappers. I only add simple intrinsics wrappers. More complex ones can be added later as they are needed, with performance tests on the corresponding feature to back them up. Remove wrongly added 128bits definitions defined on both armv7 and armv8 without concern for NEON instructions presence. Notable correspondinf code activations: * MHEAP_FLAG_SMALL_OBJECT_CACHE in mheap.c * ip4 fib mtrie leaves access * enable ixge plugin compilation for aarch64 (conf still disables it by default) Change-Id: I99953823627bdff6f222d232c78aa7b655aaf77a Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
2018-02-08acl-plugin: add whitelisted ethertype mode (VPP-1163)Andrew Yourtchenko5-5/+308
Currently, ACL plugin largely does not care about the ethertypes other than 0x0800 (IPv4) and 0x86dd (IPv6), the only exception being 0x0806 (ARP), which is dealt with by the MACIP ACLs. The other ethertypes in L2 mode are just let through. This adds a new API message acl_interface_set_etype_whitelist, which allows to flip the mode of a given interface into "ethertype whitelist mode": the caller of this message must supply the two lists (inbound and outbound) of the ethertypes that are to be permitted, the rest of the ethertypes are dropped. The whitelisting for a given interface and direction takes effect only when a policy ACL is also applied. This operates on the same classifier node as the one used for dispatching the policy ACL, thus, if one wishes for most of the reasonable IPv4 deployments to continue to operate within the whitelist mode, they must permit ARP ethertype (0x0806) The empty list for a given direction resets the processing to allow the unknown ethertypes. So, if one wants to just permit the IPv4 and IPv6 and nothing else, one can add their ethertypes to the whitelist. Add the "show acl-plugin interface" corresponding outputs about the whitelists, vat command, and unittests. Change-Id: I4659978c801f36d554b6615e56e424b77876662c Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-02-08SCTP: shutdown phaseMarco Varlese3-67/+92
This patch addresses some bugs discovered with the shutdown phase which were causing the actual chunks not to leave the output_node. While fixing the issue some minor refactoring was also performed to align the internal functions to a 'common' design. Change-Id: Ieac4f6e78cffad2e6982536f8e9f190a66f328f7 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-02-08VCL: remove vrf from vppcom api.Dave Wallace5-36/+14
Change-Id: I6d91c8051de786fb8781cd0750ea9c350036b306 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-02-08Minimize bihash memory consumptionDave Barach3-118/+207
Reference-count the number of entries in each bucket. If the reference count goes to zero, free the backing store. Add long-term churn-testing to test_bihash_template.c, thanks to Andrew Yourtchenko for the initial implementation. Change-Id: I4fbd9229cacfaba8027a85cbf87b74afdead6e39 Signed-off-by: Dave Barach <dave@barachs.net>
2018-02-08acl-plugin: VPP-1088: add support for egress filter in macip ACLsAndrew Yourtchenko2-16/+244
This is the second patch, using the new functionality from the change 10002 in order to implement the egress filtering on the MACIP ACLs. This adds an action "2" which means "add also egress filtering rules for this MACIP ACL. The reason for having the two choices is that the egress filtering really takes care of a fairly corner case scenario, and I am not convinced that always adding the performance cost of the egress lookup check is worth it. Also, of course, not breaking the existing implementations is a nice plus, too. Change-Id: I3d7883ed45b1cdf98d7303771bcc75951dff38f0 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-02-08acl-plugin: an elog-based tracing implementation for troubleshooting the ↵Andrew Yourtchenko4-32/+153
conn cleaner threads interactions This replaces some of the early-stage commented-out printf()s with an elog-based debug collector. It is aimed to be "better than nothing" initial implementation to be available in the field. It will be refined/updated based on use. This initial code is focused on the main/worker threads interactions, hence uses just the worker tracks. This code adds a developer debug CLI "set acl-plugin session table event-trace 1", which allows to gather the events pertaining to connection cleaning. The CLI is deliberately not part of the online help, as the express declaration that the semantics/trace levels, etc. are subject to change without notice. Change-Id: I3536309f737b73e50639cd5780822dcde667fc2c Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-02-08ip: move lookup inline functions to header fileVijayabhaskar Katamreddy4-648/+759
Needed to allow other code paths to reuse them. Change-Id: I9e469527c6b2e9a6fec7af5f17d8b400a2e85826 Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
2018-02-07Fix bug with glibc epoll fdKeith Burns (alagalah)1-1/+3
Change-Id: I0b8ebe2c47fdd1e23a91723a7b454a0c1c8b996e Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2018-02-07VXLAN: Allow user to specify a custom vxlan tunnel instance id.Jon Loeliger7-22/+140
If one is not selected by the user, the next available id will be allocated, thus maintaining backward compatibility. Change-Id: I4691ed0638b8072f9cfa9f20b9fe4f981e708800 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2018-02-07acl-plugin: multicore: send the interrupts to thread0 tooAndrew Yourtchenko1-1/+1
The thread0 in some configurations can handle the traffic. Some of the previous fixes accomodated for that, but the interrupt sending for connection clearing was not adapted to that, resulting in a deadlock during clearing of all connections... Change-Id: I32b4c7bac09c91c22b796baab843bdaf41f7045c Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-02-07vhost: Added ARMV8 NEON version of function map_guest_mem()Nitin Saxena1-0/+69
(VPP-1085) The NEON implementation searches particular address in VHOST_MEMORY_MAX_NREGIONS regions. Searching two regions at a time. Change-Id: Icc3c6746bc98e3a1fa71424e51b64f62efbfdc74 Signed-off-by: Nitin Saxena <nitin.saxena@cavium.com>
2018-02-07af_packet: Fix lock positionPierre Pfister1-2/+1
In multi-worker cases, af-packet tx was subject to a pretty serious race condition as the device lock was obtained after some queue values were read from queue. Result could go from packet loss to queue inconsistency, leading to tx being stuck for 'some time'. The fix is really simple. Finding the problem was not... Change-Id: Ib18967b7459a8609428a56de934c577cea87b165 Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2018-02-07classifier-based ACL: refactor + add output ACLAndrew Yourtchenko19-502/+651
For implementation of MACIP ACLs enhancement (VPP-1088), an outbound classifier-based ACL would be needed. There was an existing incomplete code for outbound ACLs, it looked almost exact copy of input ACLs, minus the various enhancements, trying to sync that code seemed error-prone and cumbersome to maintain in the longer run. This change refactors the input+output ACLs processing into a unified routine (thus any changes will have effect on both), and also adds the API to set the output interface ACL, with the same format and semantics as the existing input one (except working on output ACL of course). WARNING: IP outbound ACL in L3 mode clobbers the ip.* fields in the vnet_buffer_opaque_t, since the code is using l2_classify.* The net_buffer (p0)->ip.save_rewrite_length is rescued into l2_classify.pad.l2_len, and used to rewind the header in case of drop, so that ipX_drop prints something sensible. Change-Id: I62f814f1e3650e504474a3a5359edb8a0a8836ed Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-02-07Refactor vlib_buffer flagsDamjan Marion17-169/+152
Change-Id: I853386aebfe488ebb10328435b81b6e3403c5dd0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-07SCTP: address coverity-scan warningsMarco Varlese2-19/+10
Change-Id: Iba7c398a398e24b96eb536bbcefa841bd153a205 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-02-06Fix clang -Wvarargs compile errorsDamjan Marion3-5/+5
error: passing an object that undergoes default argument promotion to 'va_start' has undefined behavior [-Werror,-Wvarargs] Change-Id: Id342beea916ec73e29e399087532caecfa19055f Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-06Fix clang implicit conversion errorsDamjan Marion2-14/+16
Change-Id: I1771a1cca2a4bc394677b2a18f14c47f0633fa77 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-06vlib: epoll on worker threadsDamjan Marion12-42/+204
This patch teaches worer threads to sleep and to be waken up by kernel if there is activity on file desctiptors assigned to that thread. It also adds counters to epoll file descriptors and new debug cli 'show unix file'. Change-Id: Iaf67869f4aa88ff5b0a08982e1c08474013107c4 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-06SCTP: handling of heartbeating and max-retransmitsMarco Varlese4-57/+164
This patch address the need to send/receive heartbeats between peers. At the same time, the number of unacked heartbeats is tracked and when the peer requests to send DATA to the remote-peer the value of unacked heartbeats needs to be checked against the maximum value allowed for retransmissions. If the unacked heartbeats value is higher then the remote-peer is considered unreachable and the connetion needs to be shutdown. Change-Id: I2b1a21c26775e734dbe82486f40982ed5702dc63 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-02-06BIER: fix support for longer bit-string lengthsNeale Ranns11-144/+157
Change-Id: I2421197b76be58099e5f8ed5554410adff202109 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-02-06VCL: Fix type in trace output.Dave Wallace1-2/+2
Change-Id: I7834e676c23a697a12a6e06111c68450ba787fc9 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-02-06SCTP: missing spinlock init when multiple threadsMarco Varlese1-2/+5
When the number of threads results being more than 1, the spinlock structure requires to be initialized otherwise subsequent calls to the "lock" API (clib_spinlock_lock_if_init) would result in a void operation. Change-Id: Ia268c4687252e41962bb3f1217f0a849d8c40385 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-02-06Reflexive ACL support on ICMPSteve Shin1-25/+113
Normally session keys are generated by mirroring the packets sent. ICMP message type should be used and inverted for the stateful ACL. Supported ICMP messages with this patch: - ICMPv4: Echo/Timestamp/Information/Address Mask requests - ICMPv6: Echo request/Node Information Queury The invmap & valid_new tables can be modified to make any other ICMP messages to be reflexive ACL. Change-Id: Ia47b08b79fe0a5b1f7a995af78de3763d275dbd9 Signed-off-by: Steve Shin <jonshin@cisco.com>
2018-02-06Provide page-aligned length to ftruncate.Igor Mikhailov (imichail)1-1/+1
For some files such as hugepages files, ftruncate() fails with the error "Invalid argument" if the 'length' parameter is not on a page boundary. Change-Id: I42a9cde98707da15e3c5d1653046e2277fc7a424 Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
2018-02-05session: segment manager refactorFlorin Coras20-619/+815
- use valloc as a 'central' segment baseva manager - use per segment manager segment pools and use rwlocks to guard them - add session test that exercises segment creation - embed segment manager properties into application since they're shared - fix rw locks Change-Id: I761164c147275d9e8a926f1eda395e090d231f9a Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-02-05NAT64: Run nat64-expire-worker-walk only when NAT64 is configured (VPP-1162)Matus Fabian2-4/+48
Change-Id: Ic5e8d74bf5ac84cce5661de44778c89541c67636 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-02-05Fix ip4/6_reass_main.ip4/6_reass_expire_node_idx used before setDave Barach3-8/+17
Add an ASSERT to vlib_process_signal_event_helper to catch future instances of passing node_index = 0 to vlib_process_signal_event(). Change-Id: Iec896fc7c3917feb2fd3198cea42851ba88e64e5 Signed-off-by: Dave Barach <dave@barachs.net>
2018-02-05SCTP: calculate RTO / RTT and RTTVAR as per RFCMarco Varlese4-47/+122
This patch addresses the need to calculate the RTO / RTT and RTTVAR according to the rules depicted by the RFC4960 at section 6.3.1 Change-Id: I1d346f3c67610070b3f602f32c7738d58b99ffed Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-02-05vhost_user: code cleanupHaiyang Tan1-4/+4
1. Replace the magic number '-1' with MAP_FAILED 2. On x86 platform, QEMU uses vhostuser required the memory back-end is file based, the file could be tmpfs(4K page size) or hugetlbfs(2M or 1G page size) Change-Id: If1818cb6833728d641f68e4d4a3bc645e70f2ee6 Signed-off-by: Haiyang Tan <haiyang.tan.dev@gmail.com>
2018-02-03IP reassembly: workaround coverity warningsKlement Sekera2-0/+2
Change-Id: Ide577f036d9d8dcedd99cdb4666a0eaf8a19b92e Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-02-02Clean up for vcl.am, making vppcom.h C++ awareKeith Burns (alagalah)2-10/+22
Change-Id: I2548ebd37e16bed50b5c8046b728415a341413e3 Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2018-02-02lisp-cp: fix handling of ndp without source link addr VPP-1159Florin Coras1-4/+21
Change-Id: Idddb60bbc7fcc701d39212f6422a6b2f6dc75221 Signed-off-by: Florin Coras <fcoras@cisco.com> (cherry picked from commit cba3675fabe618194bf80a9de0e9c53b89a541ca)
2018-02-02VOM: route-domain find() fixNeale Ranns3-24/+5
Change-Id: I5b7117f3568e3ba979baa15521b2cfc180abb682 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-02-02vlmemory/svm: fix client detach from svm regionFlorin Coras6-13/+59
Clients cannot know at svm region detach time if the shm backing files have been recreated (e.g., if vpp restarts) and therefore should not try to unlink them. Otherwise, terminating clients attached to previous instantiations of a re-allocated region end up making the new instance un-mappable by removing its backing file. Change-Id: Idcd0cab776e63fd75b821bc9f0fac58217b9ccbe Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-02-02vlib_buffer_clone: allow client to request the maximum number of clones; 256Neale Ranns1-12/+50
Change-Id: Id96dc5d86719546268b50a9999a06387d2d9075c Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-02-02Add L3DSR feature in LB pluginHongjun Ni8-88/+246
L3DSR is used to overcome Layer 2 limitations of Direct Server Return Load Balancing. It maps VIP to DSCP bits, and reuse TOS bits to transfer it to server, and then server will get VIP from DSCP-to-VIP mapping. Please refer to https://www.nanog.org/meetings/nanog51/presentations/Monday/NANOG51.Talk45.nanog51-Schaumann.pdf Change-Id: I403ffeadfb04ed0265086eb2dc41f2e17f8f34cb Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2018-02-01Out-of-order data chunks handling and moreMarco Varlese4-69/+235
This patch addresses the need to handle out-of-order data chunks received by a peer. To do that effectively, we had to add the handling of data chunks flags (E/B/U bit) to understand whether the stream is fragmenting user-message data and in that case if a fragment is the FIRST/MIDDLE/LAST one of a transmission. The same patch also addresses the security requirement to have a HMAC calculated and incorporated in the INIT_ACK and COOKIE_ECHO chunks. The algorithm used is the HMAC-SHA1. Change-Id: Ib6a9a80492e2aafe5c8480d6e02da895efe9f90b Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-02-01IPv4/6 reassemblyKlement Sekera22-8/+2930
Change-Id: Ic5dcadd13c88b8a5e7896dab82404509c081614a Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-02-01vxlan: Lookup FIB in either IPv4 or IPv6 families.Jon Loeliger1-4/+5
Prior to this commit, the VXLAN "create" API assumed the vrf_id belonged to only the IPv4 FIB tables space. With this commit, the FIB table is found in either the IPv4 or IPv6 table as determined by the is_ipv6 flag. This follows the same pattern that was already being done in the CLI code for the VXLAN "create" command. Change-Id: I35d5e37db24efa858e4696dc2c004fa64bb4a4a8 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2018-02-01FIB: Consolidate several copies of fib_ip_proto() into one.Jon Loeliger5-24/+11
Rather than having multiple copies of the same function scattered around, promote the function into the FIB PROTOCOL definitions in fib_types.h. Change-Id: I11c4d85931167d3a5f3dc1278afecc8845b23cd7 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2018-02-01tcp: tcp_output.c failed to compile when VLIB_BUFFER_TRACE_TRAJECTORY is enabledSteven1-1/+1
Fixed a typo in tcp_push_header(). The typo only kicks in when the macro VLIB_BUFFER_TRACE_TRAJECTORY is enabled. Change-Id: I62832a4932ec5b14e3063d5eac113780851aae59 Signed-off-by: Steven <sluong@cisco.com>
2018-02-01dpdk:fix typo in prefetch sequenceEyal Bari1-2/+2
Change-Id: I7110436626352d45ffe0ca71fb88dea2c77ab639 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-02-01Add flowhash hash table to vppinfraPierre Pfister5-0/+1009
This hash table intends to provide an alternative to the widely used bihash table in places where either: - Hash entry timeout is required - The hash table data does not fit in CPU cache Although the bihash table is very fast, each lookup requires accessing two cache lines in a serialized fashion. It works fine when the hash table is in cache, but hits a wall when it does not. The 'flowhash' table uses a simplified design (at the cost of a less good bucket auto-scaling) where each access only requires a single memory lookup (in the absence of collision). The hash table also uses a reduced number of registers. In practice, a VPP node implementing a stateful feature would typically: - prefetch buffer metadata (in-cache) - prefetch packet header (in-cache) - compute hash & prefetch hash bucket (possibly in RAM) - read/write key and value from bucket Using this hash table, it is possible to pipeline accesses in a way that does not exhaust CPU's line field buffers, even when the requested value is located in RAM (i.e. not in cache). Measurements showed it was possible to scale to tens of millions of flows (with a full 5-tuple matching and 32B value, i.e. 1 cache line per flow) with no performance degradation when the hash table grows to the point it doesn't fit in cache anymore. I have used this table in a couple of non-open-sourced projects, but think it might be useful to lb, nat, and possibly other VPP subsystems. More information in the .h file. Change-Id: I2b13dde0eabd868b75da1cedbfca0bf74d705102 Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2018-02-01srv6-ad: fixing coverity issuesFrancois Clad1-8/+32
Change-Id: Ica6d8dd773bb3b478f1c7e40d59dfbdd4b588b85 Signed-off-by: Francois Clad <fclad@cisco.com>
2018-02-01srv6-as: fixing coverity issuesFrancois Clad1-8/+32
Change-Id: I911e09aadd3df1123634fd97098920f107f9a2fc Signed-off-by: Francois Clad <fclad@cisco.com>
2018-01-31Fix VNET_BUFFER_F_SPAN_CLONE flagDamjan Marion1-1/+1
Change-Id: I670e41bcfc61a45555431603c937f8dad4d165e9 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-01-31vlib: allocating buffers on thread-x and freeing them on thread-y causesSteven4-25/+17
a crash on debug image (VPP-1151) In debug image, there is extra code to validate the buffer when it is freed. It uses the hash table to lookup the buffer index with spinlock to prevent contention. However, there is one spinlock for each worker thread. So allocating the buffer on thread-x and freeing the same buffer on thread-y causes the validation to fail on thread-y. The fix is to have only one spinlock, stored in vlib_global_main. Change-Id: Ic383846cefe84a3e262255afcf82276742f0f62e Signed-off-by: Steven <sluong@cisco.com> (cherry picked from commit a7effa1b072463f12305a474f082aeaffb7ada4b)
2018-01-31Improved tracing for the IP[46] not-enabled case.Neale Ranns6-24/+77
now we get 00:00:03:665501: pg-input ... 00:00:03:665681: ethernet-input ... 00:00:03:665691: ip6-input UDP: 2001::1 -> ffef::1 tos 0x00, flow label 0x0, hop limit 64, payload length 108 UDP: 1234 -> 1234 length 108, checksum 0x7b25 00:00:03:665695: ip6-not-enabled UDP: 2001::1 -> ffef::1 tos 0x00, flow label 0x0, hop limit 64, payload length 108 UDP: 1234 -> 1234 length 108, checksum 0x7b25 00:00:03:665706: error-drop ethernet-input: no error Same goes for IPv4 Change-Id: Ia360df39b43281d3a0aa1b686f04b73cfa37c546 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-01-31NAT66 1:1 mapping (VPP-1108)Matus Fabian9-2/+1378
Support the 1:1 translation of source address for IPv6 Change-Id: I934d18e5ec508bf7422d796ee5f172b79c048011 Signed-off-by: Matus Fabian <matfabia@cisco.com>