Age | Commit message (Collapse) | Author | Files | Lines |
|
Cleanup L2/L3 mode switch to not redirect to/from ethernet-input node
as it is no longer necessary.
L2 patch should use sw_if_index for device feature enable/disable.
Type: fix
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I0f24161d027b07c188fd1e05276146f94c075710
(cherry picked from commit f415a3b53a51b261d08cc3312c25f250d6bc1bd6)
|
|
Type: fix
Change-Id: Id6687780b9a740323bd2eef58447864e70dc0235
Signed-off-by: Ignas Bacius <ignas@noia.network>
(cherry picked from commit f3a522fb3f3a82e579fbdd3f4bb94e399ad95bb1)
|
|
'quit' and 'show terminal' are valid for non-interactive sessions too.
Type: fix
Fixes: a58be82dda89d6496f92e451b42eee31f0cf47b4
Change-Id: Ib63244c7b64ad2e30c257ed19e982295f59bfffa
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit 10a22a629468b18f5b07316980e2761285283939)
|
|
Shut off deprecated declaration warnings
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I65ea4bbc4d5ee5a11d4e8f554f414f57944c7e1c
(cherry picked from commit 18a86c6e6069cbc9a0d2294ebb7f7cca5f616f84)
|
|
When vcl_epoll_wait_handle_mq handles rx events exceeding maxevents, VPP will not signal because cursize > 0, and the remaining rx events cannot be triggered because the eventfd event has been read. Therefore, we should dequeue all events until cursize = 0. And then handle msg up to maxevents with vcl_epoll_wait_handle_mq_event and those beyond with vcl_handle_mq_event.
Type: fix
Signed-off-by: hanlin <hanlin_wang@163.com>
Change-Id: I8a0c87cb41c837deb8284b40f668cc3c7d9d6e56
Signed-off-by: hanlin <hanlin_wang@163.com>
(cherry picked from commit d0e646f6892e9c85278c9538760a8940c86dcdbb)
|
|
If a cli command is run while there are no cli session, then
cm->cli_file_pool will not be initialized and we should not try to
operate on it.
Type: fix
Change-Id: Iaea15a23f7efd5b17fab13e6c1cbb3a9a34080e0
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit a58be82dda89d6496f92e451b42eee31f0cf47b4)
|
|
cxgbe PMD initializes its control channel as part of dev_configure(),
and trying to get link status prior to it will lead to a crash.
DPDK documentation loosely hints that we should not call any device
function before dev_start(), call link_state() only for the relevant
PMDs.
From DPDK API documentation:
The functions exported by the application Ethernet API to setup a device
designated by its port identifier must be invoked in the following
order:
rte_eth_dev_configure()
rte_eth_tx_queue_setup()
rte_eth_rx_queue_setup()
rte_eth_dev_start()
Then, the network application can invoke, in any order, the functions
exported by the Ethernet API to get the MAC address of a given device,
to get the speed and the status of a device physical link, to
receive/transmit [burst of] packets, and so on.
Type: fix
Change-Id: I12d2ab4d84e6bd72a9f695447e86f3222929c804
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit 31eb471d0cb0105ab74ee637028f4ab3cc00cf2a)
|
|
Calling ethernet_set_flags() to switch interface to/from promiscuous
mode must use use hw_if_index instead of sw_if_index.
Type: fix
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I72da286b913893227e32193ee11fbbc56e04804d
(cherry picked from commit 5b960c60f61c937d0f862be8a7573922b616de75)
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: If3372e3edd403240c2c9da746246170549a3e644
(cherry picked from commit 69d97256d5ca5b06b4399d8369a7a4c3b544a94d)
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I84ec1c91a3a7b2195aad58923fa6f17f551444cb
(cherry picked from commit f2fe353cc829f2074d63ebba9bb3b25e5ceb20af)
|
|
Fix a couple endian conversions for displaying Marker Protocol packet
in the trace
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I746a67fb6143b5ad52bc4af9604ff8760dbdec9b
(cherry picked from commit 9a244b0a29b3ed517fc3442c9358d79907f67a24)
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie35dc623394cfb6c358740361fd85aa0924ab187
(cherry picked from commit 1ae16c8f3bebe33b2404ad845a2f09f910a06390)
|
|
While https://gerrit.fd.io/r/c/vpp/+/26948 fixed avoid using -1 to
index into h->free_lists[b][l] by changing the loop counter, the
check for the value of the loop counter (l < 0) cannot be trusted
to decide whether we've found a large enough object within the bin
or not. When the loop is terminated, the value of the variable l
could be ambiguous if it equals to 0 and it is never less than 0,
ie, when we bail out of the loop, we don't know if it was due to the
breaking out of the condition in
if ((s = f_size - size) >= 0)
break;
or
while (l > 0);
The fix is to explicitly set a variable when we have found a large enough
object inside the loop to be used to test whether the loop was prematurely
terminated (found == 1) or the loop just ran exhausted (found == 0)
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I0161813fbd44dcba8982a767eac2e0930e9d77e3
(cherry picked from commit a5436ae2516edc955f26c6aa4103f5946ee8653c)
|
|
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I20daa023eed50f8b42e8dc2d17e47a54aa16ae31
(cherry picked from commit 13f64ce2272539d97b8c499e8e298a053fb3c9e2)
|
|
In search_free_list(), we have this do while loop.
do
{
l--;
f_index = h->free_lists[b][l];
f = elt_at (h, f_index);
f_size = heap_elt_size (v, f);
if ((s = f_size - size) >= 0)
break;
}
while (l >= 0);
When (l == 0), we still go back up to execute l--. Then l become -1. The
next statement is we index h->free_lists[b][-1]. After that, elt_at() would
probably cause a crash in the ASSERT.
Type: fix
Ticket: VPPSUPP-63
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I617d122aa221cfdfe38f8be50f4e0f0e76e11bb5
(cherry picked from commit ec7012e51edef4aec2239cb5b3a249f46d9b2cb0)
|
|
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I51660e4b02f449bd2db12a8cfd395c6c343d2dee
(cherry picked from commit c72950e811880c22e5b350c4b1cb5e31b0735b4d)
|
|
Type: fix
Change-Id: I9b613f0af484f601dd20a851e2f59ee5e06b5c37
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit 971c5be27996985e40f178c8d540a5807a428283)
|
|
When using vppcom_session* apis to setup TCP sessions in applications build outside of the VPP repository, it is necessary to set the worker_index explicitly when these apis are called from the none-VCL worker threads. An example is when data is to be sent to the TCP session that is originated from a different thread, like the main program thread or from the bin api thread. This change allows the application to set it.
Type: fix
Signed-off-by: IJsbrand Wijnands <ice@cisco.com>
Change-Id: I37f3654a49ea9a8cf3a0d3d0e672583018c12299
(cherry picked from commit 6017ff0dd7a27c062d0ad4687bfc70a69747ac55)
|
|
The path to VPP source might contain a '+' when building it
with Yocto/OpenEmbedded.
Type: fix
Signed-off-by: Ruslan Babayev <ruslan@babayev.com>
Change-Id: I205ac0de7d8726724af0e30f5b199391e05dc615
(cherry picked from commit 7f286f720d6fe2115423212dda6af66dd810691d)
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I6697296b45c5816a31535b0cf44b8e726292b8bb
(cherry picked from commit dc0ded7dd7a6b8ee68df25cd56666de804e55e64)
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Idb81e2901398dd6ae94931c705a704c7b52bbb36
(cherry picked from commit d7586d50f68655631482f33a83a1fe6f4f21ff64)
|
|
GCC-10 increase overflows-related warnings but gets confused by 0-length
arrays. Use C99 flexible length array instead.
Type: fix
Change-Id: Ie62cfa8faaa408479a598785fd3f06ffd0233c7a
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit 049d0b438ef2971181549f195c7e0338cd1c60f4)
|
|
vlib_free_simple_counter()
vlib_free_combined_counter()
Frees the name and two dimensional vector from the stats segment.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: If1becf7d09520ba41a3d59e2df94958ecfcf6948
(cherry picked from commit a568a19b2956ed8b94b11c2ef041412473dc8442)
|
|
vxlan_gpe_init() is already defined in libvnet. When loading ioam plugin
we end up having 2 different objects using the same symbol.
ASan in GCC-10 started to enforce the One-Definition-Rule and it seems
like good hygiene anyway.
Type: fix
Change-Id: I2ea9af1821bca6482a290742e9a109fc25692f37
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit 83ceffcd980494c6146ca67a0fa709b2c37ef13e)
|
|
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Icce7eab4510785e15bdcf97e4d1881b0f46f6899
(cherry picked from commit d4a639bbd2257a88fa3f06939a23c13af1d56dd3)
|
|
GCC-10 increase overflows-related warnings but is confused by SIMD
operations.
Type: fix
Change-Id: Iafde754c2fbec60e2d0a328f295b1f5c156d8234
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit a66971f980187efd03a84d340b80a7d3cf39deac)
|
|
When use the kv->v.memory_owner_thread_index as the index to get the
reass in pool, maybe this element is freed by the owner thread because
of timeout, too many fragments, and so on.
So we should check if do_handoff with kv->v.memory_owner_thread_index
before get the reass from pool.
Type: fix
Signed-off-by: Gao Feng <davidfgao@tencent.com>
Change-Id: Ie0f1dc368f86d0fd65292ca0c5e1908348015e09
(cherry picked from commit 9165e0365cc21575fd3e4a98be59317a839553f4)
|
|
GCC-10 increase overflows-related warnings but failed to infer that
b->n_cached_bytes is always < sizeof(uword).
Type: fix
Change-Id: I956ae609abc9e39d4a932e5801510999d7d27b79
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit ffbcf6178891bd68a97543ac91d28f37256d5e13)
|
|
To allow the use of WARN_ON/OFF macros to selectively disable build
warnings.
Type: fix
Change-Id: Iceb9d28b2b80c373afb51900880c23041be836db
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit be7dbbbfdd49fcfff851f38d1d36d08fc9710604)
|
|
Type: fix
Use the up parameter in vnet_netlink_set_link_state(). It was
ignoring the parameter and always setting IFF_UP on an interface.
Change-Id: I0d44406d982afbdc43bc6b26d0f22c0bdd47abdc
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
(cherry picked from commit 81284163a293759bc5c2d6a124639c6796589d15)
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I3429f9d0406b6d710846fc82d77400f26f77fdf4
(cherry picked from commit 5e6222a0332e38316b5a58b23c35cca69bb72025)
|
|
Minor change to vec_sort_with_function(...): don't depend on the qsort
implementation to deal with null, zero-long, or 1-long vectors
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I7bd7b0421673d2a025363089562aa7c6266fba66
(cherry picked from commit f593b5792031b3797cdcdfd3fbb33ac4de8c9a5d)
|
|
Type: fix
Fixes: b86437b79b82493c2e9728929df417f55b153824
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I2c833928dcdceb4d23dfc161bcc3358272076980
(cherry picked from commit e7f420177620868275add23ba5fcea7c7d18c91a)
|
|
Type: fix
if the ,api/.json specifies that a enum should be u8/u16 that the
generated c enum needs to be packed.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ia0497b45e4c510a5c63cd02e966769bf20686838
(cherry picked from commit b5c0d35f9445d4d99f2c5c7bd3175e68721a8ee5)
|
|
Extending the fib_index_to_table_index could leave entries uninitialized,
pointing to the session tables at index 0. That session index exists by
default, but it is a IPv4 session table. That would break all IPv6 on
the unitilized fib indexes.
Type: fix
Change-Id: Ie3f0a87a7f829ceb39f75ec06658b0ad1d3813ae
Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
(cherry picked from commit 30a28c187b0eb9216d5d7918712d98a4b7a5ba6a)
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I98f943c8862fa74fb576f9ec1fb9186289b1216b
(cherry picked from commit c17ff6ec3b69ef228047bf346e0b524c48d2c96e)
|
|
Make sure we disconnect from vlib prior to free-ing the last worker, as
we'll need to access it.
Type: fix
Change-Id: Id5bdd17f0f5efa1ce52021b4270eb4f1e95cc61d
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit 38ab5672b599df8ef201ca6733c9b008c37fdfa3)
|
|
bts can be freed by the call to bt_fix_overlapped(). Save flags for
later use.
Type: fix
Change-Id: If8b48c96ce39e38f2ed7f4db2815122523eb2e05
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit a04adbf5368f9ec907508ff36d42fbd72d287120)
|
|
vl_api_address_t uses a packed enum for the address family, compare
a->af directly with ADDRESS_IP4 / ADDRESS_IP6 instead of running a->af
through clib_host_to_net_u32(...) before compare.
Indirectly fixes api_ip_route_add_del(...) w/ count > 1.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ib7f562ec9e92ee63e52a338d318fcf1ce6221755
(cherry picked from commit 54582663ab7d7105bc2407036a311d68707e5ab9)
|
|
Adapt queue_hi_thresh value using num_threads to avoid risk of deadlock
between threads which could happen for example when different NAT
threads try to handoff work to each other at the same time when their
frame queues are congested. This change ensures that each thread can
reserve a queue entry without causing problems even in the most extreme
case when all threads attempt to add to the same queue simultaneously
when the queue is nearly full.
Type: fix
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
Change-Id: I9e02f753bd00833d8dd500d181b0d4f9a454d703
(cherry picked from commit 368104d06ad6d667a8cce152426916fc654b6627)
|
|
Type: fix
Change-Id: Ia5ae0e893a5358f61353d20f444d88d79953e482
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit b9753540d2a69bbab807653fc3d0c1b43ec4d6d5)
|
|
Type: fix
Change-Id: Ie60b07abe76ad166f048f5885accd7038d8153b2
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit 7ce23f25bbc01d534ca294ce88ab0d709e3e03a7)
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iba37e528e968104c3ba9c8324438ba695ddddfd1
(cherry picked from commit da302e4fce1003a2fdd2ace7e1ae09987399092c)
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4d56b61af574dfdaf6028160ce331606bdf65609
(cherry picked from commit f49cf470c583507fa1b5b841887107071701ef5e)
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I56c487821233cebf2146745a4706cb573cc088a5
(cherry picked from commit cbce80aaa3f1853856d4d64c95f10d65caa4d786)
|
|
Type: fix
Change-Id: Ib455b0a57f9b4f9cb82bb295c220270d0c6e5fe5
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit 040d47c2cce87255a101f301239192c5599b0db5)
|
|
Type: fix
Change-Id: I42c3e3514ba50d40e09ee688d083f3e78fa0713a
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit 101fc278c3b7009c42574a25b96c4fb7fcd15e39)
|
|
replace hand crafted version with existing vector function
Type: fix
Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
Change-Id: I94834852469ed316c7bdbd48bb7f479648b2c8e5
(cherry picked from commit 63551351b75d1363b57ed1810b0d7065ca5cd600)
|
|
Now UDP encapsulation doesn't work in transport mode because:
- the encrypt node misses filling of UDP header and it gets sent with
all zeros;
- the decrypt node misses filling of new IP header and it contains
garbage data.
With this commit, fill UDP header during encryption and fill IP header
during decryption.
Change-Id: I87a7bd594f0e312b16d3e5eb19e568b4e3164d36
Type: fix
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
(cherry picked from commit 82fc98fa4578dbbfb156effb11dea6a4e2d0b898)
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I21daa87b1a301142270a1bf20680dd9e9395aac9
(cherry picked from commit ce815deb72fd3941b000aecec931131afc9d6c34)
|