Age | Commit message (Collapse) | Author | Files | Lines |
|
Request connected udp listener behavior by setting
VPPCOM_ATTR_SET_CONNECTED attribute with vppcom_session_attr
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iba95155c0f41cea8c6e1a4263946270d49c213ac
(cherry picked from commit 1e96617d952e2d5d8cc367a226702f8f825ed039)
|
|
Type: fix
Ticket: VPP-1885
Change-Id: I474fffd4d36f439a19d475a8cb20171ca88274ec
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
(cherry picked from commit 353535bb4856d8ee6d818a3c75b8b576b9967ee4)
|
|
Type: fix
Change-Id: Ic3fc488521636f7f7c9402a20db45fdb599adaae
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
(cherry picked from commit be03b5c15598131355da91967d05321c15fa1f24)
|
|
Type: fix
Ticket: VPP-1885
Fixes: 58db6e1
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I6431e49b315e09490fed8fd70ac53872836c6a09
(cherry picked from commit f3c1e4b61269cd93302073a631a2549f1aeb24d9)
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I83dafe10cdc78fbb9a751f32155cd84d281b12d9
(cherry picked from commit a4dac8af0eb4271db0c528a00beca58f41b51c95)
|
|
Type: fix
Ticket: VPP-1886
Fixes: 58db6e1
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic40018a756e57bfec05ffbc5e30d18f4feb315db
(cherry picked from commit 9b72b153d85d0e3e0ca218bcf1564805424b64b9)
|
|
Type: fix
the hash walk does not give the same guarantees as the bihash so
walk in a safe manner.
Change-Id: Idfe48c3a84ab3a341d887f7d196bc81ba34ae8b0
Signed-off-by: Neale Ranns <nranns@cisco.com>
(cherry picked from commit 22391fa92b95ee0376eb372450d6315523c8a9ae)
|
|
Fix and optimize DMAC check in ethernet-input node to utilize NIC or
driver which support L3 DMAC-filtering mode so that DMAC check can be
bypassed safely for interfaces/sub-interfaces in L3 mode.
Checking of interface in L3-DMAC-filtering state to avoid DMAC check
require the following:
a) Fix interface driver init sequence for devices which supports L3
DMAC-filtering to indicate its capability and initialize interface
to L3 DMAC-filtering state.
b) Fix ethernet_set_flags() function and its associated callback
flags_change() functions registered by various drivers in interface
infra to provide proper L3 DMAC filtering status.
Maintain interface/sub-interface L3 config count so DMAC checks can be
bypassed if L3 forwarding is not setup on any main/sub-interfaces.
Type: fix
Ticket: VPP-1868
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I204d90459c13e9e486cfcba4e64e3d479bc9f2ae
(cherry picked from commit 4a302ee7c75f3d4fd1a73a9d1f6c34b3bde8d620)
|
|
Looks like MAP_LOCK is not enough, so call mlock(...) instead....
Type: fix
Change-Id: I1bc668a2bf3c861ca1c2d376c0fb6bfea87d4f48
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
adding routes should be MP safe. When new prefixes with differrent
prefix lengths are added, adjust the sorted list in an MP safe way.
Change-Id: Ib73a3c84d01eb86d17f8e79ea2bd2505dd9afb3d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
we can probably do better, but for now this is needed
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I07161f5ac07a70a0e6db6608ba31659d9bc2c9ed
|
|
Type: fix
Ticket: VPP-1882
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I342d8f928fcc7de74f9bd288c1a5d63ea1f90020
(cherry picked from commit 0ab36f55753d3d1417c41f8a3aec5e79a882555c)
|
|
Type: fix
when the interpose is on an adj-fib and the cover is removed the adj
source will not install. this lead to no path list being found for the
interpose source and a crash. pick a drop path list in this case.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ied217da043926c913657080f5ffb151201225d23
|
|
Type: improvement
a bihash per-interface used too much memory.
Change-Id: I447bb66c0907e1632fa5d886a3600e518663c39e
Signed-off-by: Neale Ranns <nranns@cisco.com>
(cherry picked from commit 20aec3db441074ee5a861a40d6e02fad2f3dcb37)
|
|
Type: fix
Signed-off-by: Rajesh Goel <rajegoel@cisco.com>
Change-Id: I8d128598b4c872f19b64c779c19b5908ba2f2c08
(cherry picked from commit d1d90f5951df93625594f1904cddd95880838ff0)
|
|
Type: fix
Ticket: VPP-1880
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I1e9652b476bbc07852b4e701a948c36a0d8c67fa
|
|
Type: fix
Fixes: 487507f
Ticket: VPP-1879
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia9813ae09d14111dc8edac0fa6ab082e13ab6e2e
(cherry picked from commit 3b9540966f877ae67d374cab334c31bd6e3f8c8b)
|
|
Obserbed when VPP is running in k8s container
Type: fix
Change-Id: Ibbff9c3921bd7f4f97d47cb6f10eed8ed5efe269
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
In case there is no free space in first buffer for ICV and footer,
additional buffer will be added, but esp_encrypt will stay in single
buffer mode.
The issue happens for the following payload sizes:
- TCP packets with payload 1992
- ICMP packets with payload 2004
This fix moves the single/chained buffer ops selection to after
esp_add_footer_and_icv call.
Type: fix
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: PiotrX Kleski <piotrx.kleski@intel.com>
Change-Id: Ic5ceba418f738933f96edb3e489ca2d149033b79
(cherry picked from commit fdca4dd1a1a817e65bf44e435261d893fc0c51d6)
|
|
Document update to reflect merged SRv6 functions into 20.05 of lookup and forwarding for inner IP packet encapsulated with outer IP and GTP-U headers.
Type: docs
Signed-off-by: Satoru Matsushima <satoru.matsushima@gmail.com>
Change-Id: I85c9ddf6bf9fa63f2b8b6e03eff3ecec1e7615ab
|
|
Type: fix
Change-Id: Idf7c80b7d81f796bd0512bca4276bcfcf2af241a
Signed-off-by: Neale Ranns <nranns@cisco.com>
(cherry picked from commit fc74697ed3b45499027b272332af786e8e7917bb)
|
|
Type: fix
Ticket: VPP-1870
Change-Id: Ife726d2f6baaa3516c209011183f39670cf6a55d
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
(cherry picked from commit 88120824acc299a0aec17ce4c208dbc8be394779)
|
|
Type: fix
Signed-off-by: Ye donggang <yedg@wangsu.com>
Change-Id: Ia9f72ff2be455ecd4ff3d16e884c5a50f9df69fe
(cherry picked from commit dbd366b239c0506b0d9984e7481967e038f10a23)
|
|
Type: fix
Change-Id: I7349840af48eec209532dab43a8ad0bd68993268
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit c32a84c70efb45081568fc8aa5fa1884d74865fe)
|
|
Removing the comments around eid_type which seem to have been overlooked
by the original patch https://gerrit.fd.io/r/c/vpp/+/24663.
NOTE: This patch is a doc-only change. It does two things:
1. Remove comments around obsolete eid_type type
2. Update the comments to reflect the new vl_api_eid_t type
This is to ensure correct documentation is displayed to user/reader of
VPP docs in 20.05.
Type: fix
Signed-off-by: Onong Tayeng <otayeng@cisco.com>
Change-Id: I48e1993cf8869cb32e159d1956f3ec1e5943e33f
(cherry picked from commit 4ab5190eb4167ac4c06cd649ec8a860784ab1d41)
|
|
Swap byte order for fields of type vl_api_rx_mode_t.
Ticket: VPP-1871
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Ia1745257b57209d41661d38067e0dd7618f9a9b9
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
(cherry picked from commit aefcd1a3579ec2c93f606b151d563d87ea211387)
|
|
Type: refactor
Ticket: VPP-1875
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I145ff3301f168973c4f7f32c337bbcac47900705
(cherry picked from commit 3ca663e743dda703e76d8493a0c5cf13d7004c63)
|
|
Type: fix
Ticket: VPP-1874
Seems clang needs explicit casting to u64 of u64 and f64 multiplication
before truncating to u32
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ib0d7a33d4c5e68577e401e854fc3e55e0723da93
(cherry picked from commit 17b5c3d6ab83a597e7c79613041f2fd7470825bd)
|
|
When vcl_epoll_wait_handle_mq handles rx events exceeding maxevents, VPP will not signal because cursize > 0, and the remaining rx events cannot be triggered because the eventfd event has been read. Therefore, we should dequeue all events until cursize = 0. And then handle msg up to maxevents with vcl_epoll_wait_handle_mq_event and those beyond with vcl_handle_mq_event.
Type: fix
Ticket: VPP-1873
Signed-off-by: hanlin <hanlin_wang@163.com>
Change-Id: I8a0c87cb41c837deb8284b40f668cc3c7d9d6e56
Signed-off-by: hanlin <hanlin_wang@163.com>
(cherry picked from commit d0e646f6892e9c85278c9538760a8940c86dcdbb)
|
|
Calling ethernet_set_flags() to switch interface to/from promiscuous
mode must use use hw_if_index instead of sw_if_index.
Type: fix
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I72da286b913893227e32193ee11fbbc56e04804d
|
|
Type: fix
... it's not a feature anymore
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ifbcaf7d832aa76336feb0556d0dc7d2002f19c35
|
|
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I2a70db3a25450e014adaed84989f4da9bb77b14d
|
|
This fixes a situation where long-lived inactive session blocks LRU
list. Solution is to have multiple LRU lists based on session type.
This helps because session timeout is same for all sessions of same
type.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I5e54b2aab73b23911d6518d42e8c3f166c69a38c
|
|
Use a lookup table instead.
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ia8461099828bb8824bf016201f135e6b69c444d1
|
|
Type: fix
In quad loop, checksum will be calculated for all four packets,
if one packet needs checksum computation, without respecting their
respective flags. This patch fixes it.
Change-Id: I479b420ba0dcbd178ea4180bf05a0e55a6b13843
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
it is possible for a user to change the end node of a feature arc, but
this change should only apply to that 'instnace' of the arc, not all
arcs. for example, if a tunnel has its ipx-output end node changed to
adj-midchain-tx, this shouldn't affect all ipx-output arcs. obviously...
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I41daea7ba6907963e42140307d065c8bcfdcb585
|
|
Type: fix
Only add GSO and Checksum offload flags when gso is
enabled.
Change-Id: I58945a4ffbb9a0e6a8640fc01424c63feef16306
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
the es4-encrypt and esp6-encrypt nodes need to be siblings so they both have the same edges for the DPO on which the tunnel mode SA stacks.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I2126589135a1df6c95ee14503dfde9ff406df60a
|
|
Type: fix
Change-Id: I14e323e7bb1db7a3d40668212535c07504374e59
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: fix
Change-Id: Idf9b0ffb4e3a0113bece80d1195192bdf46feb89
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Avoids issues if thread with non-zero __os_thread_index attaches to
binary api.
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ib981f12c867fdee7590391ec43128145bb1abce6
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: If3372e3edd403240c2c9da746246170549a3e644
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I84ec1c91a3a7b2195aad58923fa6f17f551444cb
|
|
Fix a couple endian conversions for displaying Marker Protocol packet
in the trace
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I746a67fb6143b5ad52bc4af9604ff8760dbdec9b
|
|
Avoids crash due to missing symbol, when build system detects toolchain
which is not able to produce binaries for all targets we need....
Type: fix
Change-Id: I77ee63cb8dca3c9e4e83a6235c60f1439a472444
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie35dc623394cfb6c358740361fd85aa0924ab187
|
|
Fix the issue that vppctl show ip4{6} neighbor [interface] command can't
show entries correctly, example: both ip4 and ip6 entries can be shown
with command:
vppctl show ip4 neighbor.
Type: fix
Signed-off-by: Michael Yu <michael.a.yu@nokia-sbell.com>
Change-Id: I229368b71cd285adce994c8290cc9d7e4c4f5aa6
Signed-off-by: Michael Yu <michael.a.yu@nokia-sbell.com>
|
|
Type: fix
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Change-Id: I617fb365def22a28d48f75013dea38f8e1703a44
|
|
crcchecker is a tool for enforcement of the binary API.
1. Production APIs should never change.
2. An API can be deprecated across three release cycles.
Release 1: API is marked as deprecated.
option deprecated="vyy.mm";
option replaced_by="new_api_2";
Release 2: both old and new APIs are supported
Release 3: the deprecated API is deleted.
3. APIs that are experimental / not released are not checked.
An API message can be individually marked as in progress, by:
option status="in_progress";
In the API definition.
The definition of a "production API" is if the major version in the API file is > 0.
extras/scripts/crcchecker.py --check-patchset # returns -1 if backwards incompatible
extras/scripts/crcchecker.py --dump-manifest
extras/scripts/crcchecker.py --git-revision v20.01 <files>
extras/scripts/crcchecker.py -- diff <oldfile> <newfile>
This patch integrates the tool in "make checkstyle-api".
A future patch is required to integrate the tool in the verify job.
I.e. this patch does not enable enforcement through Jenkins.
Change-Id: I5f13c0976d8a12a58131b3e270f2dc9c00dc7d8c
Type: feature
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Fix coverity issue #210194 in gtpu-decap
Type: fix
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I5b172c8494527e7117c4e7e7083a8473165aa40f
|