Age | Commit message (Collapse) | Author | Files | Lines |
|
Ticket: FDIO-753
Type: fix
Change-Id: I4a8cf06970b658dfa15768459a3ff76571d6dfff
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Valgrind never really worked well with VPP. Remove the partial support.
Type: refactor
Change-Id: Ic09773fd85f904fdd2240bc161e23a4c2b196cf6
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
In ethernet_input_inline(), when verifying that the destination
mac address on a received packet matches the mac address of the
interface where the packet was received, check the secondary
addresses on the interface if the primary address does not match.
This was done previously for eth_input_single_int().
Change-Id: I45716184dd789d83852271f9c79cedf5f6cbf75b
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: feature
from the API doc, a table replace is:
"
The use-case is that, for some unspecified reason, the control plane
has a very different set of entries it wants in the table than VPP
currently has. The CP would thus like to 'replace' VPP's current table
only by specifying what the new set of entries shall be, i.e. it is not
going to delete anything that already eixts.
the CP delcartes the start of this procedure with this begin_replace
API Call, and when it has populated all the entries it wants, it calls
the below end_replace API. From this point on it is of coursce free
to add and delete entries as usual.
The underlying mechanism by which VPP implements this replace is
purposefully left unspecified.
"
In the FIB, the algorithm is implemented using mark and sweep.
Algorithm goes:
1) replace_begin: this marks all the entries in that table as 'stale'
2) download all the entries that should be in this table
- this clears the stale flag on those entries
3) signal the table converged: ip_table_replace_end
- this removes all entries that are still stale
this procedure can be used when an agent first connects to VPP,
as an alternative to dump and diff state reconciliation.
Change-Id: I168edec10cf7670866076b129ebfe6149ea8222e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
check the return result from fcntl, and if error, behave
the same way the expansion of _IOCTL macro does.
Type: fix
Change-Id: I6d537d1bdedae64470612aef64b46e07387fe84b
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: fix
Change-Id: I36558b67d38266def9dfe45777d9757a33ce2569
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: Icc8cd05cb9c1844a9f8b0399797ad554f4ccf1a1
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
If an arc declaration includes '.last_in_arc = "some-node"', assume
that folks mean it and add explicit ordering constraints.
Fix the "arp" arc declaration which claimed that the arc ends at
arp-disabled, but the arc really ends at error-drop.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ie2de1fb30091671cbc7c62770903a2e05987f141
|
|
Type: fix
Change-Id: I91063e2096fb09c34898a611184c8381fccdb333
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: style
Change-Id: Ib8febf8ea83f7ce1aeb93f227d00d3111fbef4ab
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Change-Id: I6b42bb9fb9d2e57f523022e321770bb1ff7415f3
|
|
Type: fix
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Change-Id: Id47e3f2c348f07c84d9c2499122fa25d6c74fb13
|
|
File "/vpp/src/vpp-api/python/vpp_papi/vpp_serializer.py", line 512, in __init__
'Unknown message type {}'.format(f_type))
vpp_papi.vpp_serializer.VPPSerializerValueError: Unknown message type i16
Type: fix
Change-Id: Ibf73dc8df90153db586afe614e47be49739bac2f
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: feature
Change-Id: Id3cd89eca0deddb70f506239f9d0543fc28cf7f4
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: refactor
Change-Id: I1d90c8807e7eea4a77403bafc0628ec0d393c572
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: feature
* Remove the retry mechanism in case of failed connect
* Limit the number of simultaneous connects (default
to mqsize / 2)
Change-Id: I7a0ed2e349ee3e8ca71639c2a2ec4cdf84f5c13e
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: feature
Change-Id: Ia016fee107859d5ad22fe7959c8e9d32758e0787
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
We don't need the pool anymore as we store
the ctx index in the underlying UDP session opaque
Change-Id: Iec9be9c84a1f929d94b084176a143d304b0acb83
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: refactor
Use ipsecmb single GCM enc/dec API to furthuer improve single
buffer performance for small packets.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: I2d34ff50d34b09f194fc0c88b6e9a3928a86fc33
|
|
set the address to MMAP_FAILED if mmap has failed,
so that we do not attempt to free it in the error
handling path.
Change-Id: I6e6b51a365fb68086dc20aa40a676a36af59a3ba
Type: fix
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Add PAPI support for VppTypeAlias decaying to BaseType.
E.g vl_api_interface_index_t sw_if_index [default=0xffffffff]
Type: feature
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I2061392157c9c11fbb0ff9e5406ea65489b017e9
|
|
IPsec writes trailing data at the end of the buffer without checking
if there is enough space. If the packet length equals buffer size this
leads to rewiting of the next buffer header in the pool.
Type: fix
Change-Id: Iceb27bb724c7243863a4b532aad0808051b7d74c
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Change-Id: I5ad27b05c34494c5a2ea28706130612b547aaf67
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: feature
Change-Id: I77b3ee74229f3c85e99f74bf9000cb5aedbc1760
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: I8ff60cf8726c463491c687e170ad0b1026a1303a
Signed-off-by: jiangxiaoming <jiangxiaoming@outlook.com>
|
|
Type: feature
To avoid excessive bursts, pacer must be provided with an estimated rtt
for the connection. That's used to compute an idle timeout, i.e., time
after which the bucket is reset to 1 mtu due to inactivity. For now,
idle timeout is computed as 5% of the rtt.
Change-Id: Ia0b752fe7b4ad0ce97b477fb886b0133a2321541
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Finish the feature, and fix a couple of doc bugs
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I2c62745fda137776204c8fc4fca0e7e288051573
|
|
Type: test
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: If31f4b50da7a6e4a9704ceb3415c582143c08355
|
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: If41f154c354772f5b32cfd35ea231b8f59c2c0c5
|
|
Type: fix
Change-Id: I6f25d9295b973ab7133071b6dc325ecd86386898
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
traffic selector vector isn't freed when freeing child SA
Type: fix
Change-Id: Icf6c240db5093f45d141451bad6f6627a61821cf
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Ticket: VPP-1771
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I48854befbd3d1514ad8b41ac5b194259c2a577a4
|
|
Type: feature
Adding:
VNET_FLOW_TYPE_IP4_GTPC
VNET_FLOW_TYPE_IP4_GTPU
VNET_FLOW_TYPE_IP4_GTPU_IP4
VNET_FLOW_TYPE_IP4_GTPU_IP6
VNET_FLOW_TYPE_IP6_GTPC
VNET_FLOW_TYPE_IP6_GTPU
VNET_FLOW_TYPE_IP6_GTPU_IP4
VNET_FLOW_TYPE_IP6_GTPU_IP6
in this patch
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I4ad53895b5ac0771432bb039b8c79e48e3c19f25
|
|
Type: feature
Change-Id: I7dcc8c6911d02729b3bda1b3a21a211c82c3b949
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: I689649ad163e76fecdabe96a8c2be5be3068ffde
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Change-Id: Ic67d9da65d937f56ecf994a5504c6351624b32ff
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Change-Id: Iac8d4ed4997c4fce802589585e6a9424957152ca
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: I38a5cbd53b278c21142bac4ee1bbe5dc8bcaaac9
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: Ia4b1eb3c704374e27b260d88ae6ab628754468d3
|
|
Type: fix
Change-Id: I522db62db50fc0fa46a6dd7cddd32e2f09b5e5a6
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: Ia28cf193f7fed2a1702774f3f74f505cc7bad954
|
|
Type: fix
Change-Id: Ic221cd4fcad89aece71239ed96152bf0311f3286
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Change-Id: I7f64fb1a13d90fa1679ca2ca35206092682f0c8f
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: feature
Plug-in for IPv6 Segment Routing Mobile
This funcion was developed by
Signed-off-by: Satoru Matsuchima <satoru.matsushima@gmail.com>
Signed-off-by: Filip Varga <filipvarga89@gmail.com>
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
Change-Id: Ie995adc73d8f8d444339aab71619c3599e69f12d
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
|
|
ip4_map_get_domain returns d0 = 0 in case of no domain,
and sets error MAP_ERROR_NO_DOMAIN. Rearrange the clauses
in the logical check that relies on dereferencing d0
such that boolean shortcutting takes care of not
referencing the null pointer.
Change-Id: I378adc120836ea920fc530808ac3c1f98ab8d593
Type: fix
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: fix
Ticket: VPP-1747
Change-Id: If282aae3e584d7017c200f897b99c8a37eb1b2e5
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Original MSS clamp patch by Vladimir Ratnikov.
Modified to apply only to TCP packets.
Type: fix
Test: Wrote new unit test to ensure MAP-E TCP MSS clamping.
Change-Id: I77c69714a2e3cc3b7473aa12b645243bb595c2a2
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Type: feature
For some deployments(mobile traffic) we need few extra bytes of space
Signed-off-by: Srikanth Akula <srakula@cisco.com>
Change-Id: I3367561dc23dbb8b266dea583e23b9430fd7dcab
|
|
Type: fix
Adding few extra checks while doign session validationwq!
Signed-off-by: Srikanth Akula <srakula@cisco.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4d18b5ad97d1802ce38a07aeb56b5f35939c1187
|
|
Type: test
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I2dc4c09730f77931a2b484a6dd5dc669068f8e57
|