Age | Commit message (Collapse) | Author | Files | Lines |
|
Clean up license / copyright headers
Type: fix
Ticket: VPP-1771
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ibfc2a46632e17578fd74357b83f417987b8447be
|
|
Use consistent API types.
memif_create now enables zero-copy by default.
Add no_zero_copy param to memif_create which
if set, disables zero copy.
Type: refactor
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I11df8b9212c40de179ee71dc9da14039b982ede5
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Separate debug CLI arg parsing from the underlying action
function. Fixes a number of subtle ordering dependencies, and will
allow us to add a binary API to control the feature at some point in
the future.
Type: refactor
Ticket: VPP-1762
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I1240fe3f61a0acf5ee9faed60d6ad3386e72e569
|
|
When checksumming chained buffers with odd lengths: insert a
NULL byte, or the calculation fails.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I380f7c42897bdb28c8c29aa1c4cdaaa849cc9ecc
|
|
Type: fix
Change-Id: If827fe348fe35d1221d29f91b7e6ea1624d13999
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Not all interfaces have the same characteristics within the bonding group.
For active-backup mode, we should do our best to select the slave that
performs the best as the primary slave. We already did that by preferring
the slave that is local numa. Sometimes, this is not enough. For example,
when all are local numas, the selection is arbitrary. Some slave interfaces
may have higher speed or better qos than the others. But this is hard to
infer.
One rule does not fit all. So we let the operator to optionally specify the
weight for each slave interface. Our primary slave selection rule is now
1. biggest weight
2. is local numa
3. current primary slave (to avoid churn)
4. lowest sw_if_index (for deterministic behavior)
This selection rule only applies to active-backup mode which only one slave
is used for forwarding traffic until it becomes unreachable. At that time,
the next "best" slave candidate is automatically promoted. The slaves are
sorted according to the preference rule when they are up. So there is no need
to find the next best candidate when the primary slave goes down.
Another good thing about this rule is when the down slave comes back up, it
is selected as the primary slave again unless there is indeed a "better"
slave than this down slave that were added during that period.
To set the weight for the slave interface, do this after the interface is
enslaved
set interface bond <interface-name> weight <value>
Type: feature
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I59ced6d20ce1dec532e667dbe1afd1b4243e04f9
|
|
Previously, if the first thing a server did was to open a stream and
send data, this could trigger a crash on the clilent side VPP as the
quic session wouldn't be allocated.
Change-Id: I43990ce2a71217d6719ecae4da60111d05fbcfc0
Type: fix
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
Type: fix
Ticket: VPP-1766
revert e4ac48e792f4eebfce296cfde844ee73b1abd62f
Change-Id: I03feea4008a47859d570ad8d1d08ff3f30d139ef
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
(cherry picked from commit 623a1b7053424b539a51faf866ab839d3da3f45b)
|
|
VERSION_GREATER_EQUAL is not supported before CMake version 3.7.
Type: fix
Signed-off-by: Jianlin Lv <Jianlin.Lv@arm.com>
Change-Id: Id690b7b7c26121f9d289ebd0aaea0860be63795f
|
|
Extended stats are not displayed due to incorrect condition.
Type: fix
Change-Id: Ie04664e6274137462dce832bf7ee06204cd77be5
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I4b91ebe8aadbec8b95716ed1cde4b0a13eee3a3f
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Add /if/lacp/<bond-sw_if_index>/<slave-sw_if_index>/state
<bond-sw_if_index> is a vector of the bond sw_if_index
<slave-sw_if_index> is a vector of the slave sw_if_index
Content is the integer value of the lacp actor state. The state is actually
a bitfield as described in the lacp protocol spec.
Type: feature
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ic6eca8ce2a1acd2d858e4e50b7eac1d000ea08e5
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I823b6297e1d2bdd438633ec7b877960e6d8423fa
|
|
Type: feature
Allow session cli filtering based on thread index, transport protocol,
session state and range of session pool indices. For instance
show session thread 1 proto tcp state ready range 0 20 verbose
Shows the session ids for the first 20 tcp sessions in thread 1 that are
in ready state.
To avoid excessive output that could reasult in the worker barrier being
held by the main thread for long periods of time, the session cli will
only output:
- session ids (verbose == 1) for a maximum of 50 sessions / worker
- verbose > 1 details for a maximum of 10 sessions
Change-Id: I2cfb351b548e2e0a1d5b4345810be613e2917d17
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: refactor
Change-Id: I15b10a22d0d0b83075a0eef5ef8c09cf76989866
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
In eth_input_process_frame(), destination MAC addresses are
compared to the interface hardware address in a loop. Move
this to a separate inline function to facilitate making changes
to the filtering logic more cleanly.
Type: refactor
Change-Id: I0978f01667e78af5214dbbc9ba223f5b84ce6b7e
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Fixes: b4ff07a
Change-Id: I361ec71944048734b73eec700e32531fb070194e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Idad79286b7730c8e85202c4b8e675ea50f8bbc48
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: fix
Change-Id: I1dbc822061f43fcc25dfa5d1728f5c7575139f45
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
In eth_input_process_frame(), a loop which checks the destination
MAC address of received packets had a different condition for avx2
than it did for the non-avx2 version of the loop. It could result
in one unnecessary execution of the loop body after all packets
had been processed.
Type: fix
Fixes: 8d6f34e2b1cbfde5702e88686631527d5e1e10a0
Change-Id: Ib673f45917a0dea461987fdc8f0ca318b749fb1a
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Enforce that variable length fields are the last element of API messages.
Add a 'fixed' version of string type, since dealing with
multiple variable length strings turned out too painful
for the C language bindings.
The string type is now:
{
string name[64]; // NUL terminated C-string. Essentially decays to u8 name[64]
string name[]; // Variable length string with embedded len field (vl_api_string_t)
};
The latter notation could be made available to other types as well.
e.g.
{
vl_api_address_t addresses[];
}
instead of
{
u32 n_addr;
vl_api_address_t addresses[n_addr];
};
Type: fix
Change-Id: I18fa17ef47227633752ab50453e8d20a652a9f9b
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
vlib_node_get_nodes() creates a duplicate node structure which was never freed.
Type: fix
Fixes: 1ddbc0138b
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ib1200854937faaa694b398607d2f0ba65aa81c01
|
|
Do not use low-level sw_interface_set_mac_address() directly and use
higher-level set_mac() instead, otherwise interface local_mac and
configured mac are out-of-sync
Type: fix
Fixes: 25b049484f
Change-Id: I9366e7afb95ef00e25a94ca3b0e6309871169878
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Add controls to list / not list a specific bihash in clib_all_bihashes,
to immediately initialize a bihash.
clib_bihash_init2 is now the primary API. It takes a typical args_t
structure. clib_bihash_init becomes a compatibility widget. It
fabricates an args_t and calls init2...
Type: refactor
Ticket: VPP-1758
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ib3e1304884997cf7025af20bdc67a7dda290f15b
|
|
The VPP code tries to set all userspace memory in the table via IOCTL
to VHOST_SET_MEM_TABLE. But on aarch64, the userspace address range is
larger (48 bits) than that on x86 (47 bits). Below is an segment from
/proc/[vpp]/maps.
fffb41200000-fffb43a00000 rw-s 00000000 00:0e 532232
/anon_hugepage (deleted)
Instead of setting all userspace memory space to vhost-net, will only set
the address space reserved by pmalloc module during initialization.
Type: fix
Change-Id: I91cb35e990869b42094cf2cd0512593733d33677
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
Reviewed-by: Steve Capper <Steve.Capper@arm.com>
|
|
Type: feature
Change-Id: I3e97e05a31806afb6b2e84ecf05fb96d285db92e
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I8eb243e80ff043a23cb3efae186164dad6c11ca8
Type: fix
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
vlib_increment_combined_counter takes sw_if_index, not hw_if_index. Using
hw_if_index may work as long as there is no subinterface created to cause
hw_if_index and sw_if_index to differ.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I6db042186eeeacf32250f7ef261af8cd6f5ce56e
|
|
Credits to ray.kinsella@intel.com who spotted the issue and identified
root cause.
Type: fix
Change-Id: I4afe74c47769484309f6aebca2de56ad32c8041f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: I5d0ac1fe6a6770ab8b3a9c366d10387718391199
Signed-off-by: Ping Yu <ping.yu@intel.com>
|
|
vlib_increment_combined_counter takes sw_if_index, not hw_if_index. Using
hw_if_index may work as long as there is no subinterface created to cause
hw_if_index and sw_if_index to differ.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: If50412dc1e84c4f1f5b977b58d0e1aeb5ab8ebe6
|
|
Type: fix
Change-Id: Iff4a13da654dbdf7f08bb6d0743b466a1e6be01b
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
in case the app requests another dequeue notification, it should not be cleared
Change-Id: I7e94e8e30ef098f87f5e7f4880af276970ee5b37
Signed-off-by: Vladimir Kropylev <vladimir.kropylev@enea.com>
|
|
gso option for vmxnet3 is per VPP process currently. There is no reason why
we cannot provide per interface gso support.
Type: feature
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ife962b52221191050dedd18252b859880ccd7599
|
|
Per interface, next hop graph node can be customized
with vnet_hw_interface_rx_redirect_to_node function,
but it doesn't work well for af-packet type interface.
In current implementation, with function
af_packet_set_interface_next_node invoked next hop graph
node index can be set to apif->per_interface_next_index,
but it's not set to next0 properly for packet processing
in af_packet_device_input_fn.
Type: fix
Signed-off-by: Michael Yu <michael.a.yu@nokia-sbell.com>
Change-Id: I8e132ddd1c3c01b6f476de78546d4a9389b3ff87
Signed-off-by: Michael Yu <michael.a.yu@nokia-sbell.com>
|
|
Type: feature
Change-Id: I7c5684a9f88e56fd62d83a59c14c4e4a6f096b89
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I3ee59106ba45164a4ee3788bf4dcf5bf4c2dc1c2
|
|
Type: fix
Use different mss for v4 and v6 packets.
Change-Id: Ifcd322c1fd74f749a42bae671dd6cfed8c32b150
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: I1b9c8b0f9292f039b941e18d8aca5d734d5f1e77
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: feature
Change-Id: I55349f482ce6781337f747b2f0d2c0a027c3a675
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: feature
Distinguish between rcv window errors and errors after we advertised a
zero rcv window, i.e., potential window probes.
Change-Id: I6cb453c7aaae456c0a05a8328cfaa55eaca10bf7
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
show session rules tcp
vpp/src/vnet/session/application_namespace.c:34 (app_namespace_get)
assertion `! pool_is_free (app_namespace_pool, _e)' fails
Thread 1 "vpp_main" received signal SIGABRT, Aborted.
Signed-off-by: Guanghua Zhang <ghzhang@fiberhome.com>
Change-Id: I3430339a598a92d0a38826471adeb4547b0b7df4
|
|
Type: fix
Fixes: d991a798ff
Change-Id: I1920a40d7bbb01593676d9d8564158fdba9452bb
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
lacp gets the packet from the device driver. Let's continue the input
packet trace's trajectory instead of restarting it in lacp-input.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I4d4537e050742a23f74287086d38d39673ebd60f
|
|
Type: refactor
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
Change-Id: I8674ff5f6f6336b256b7df8187afbb36ddef71fb
|
|
vl_api_prefix_t size is 21 byte, ip46_address_t size is 16 byte, only copy
16 byte of vl_api_prefix_t to ip46_address_t is not correct.
Type:fix
Change-Id: I35ede7836a0c878d39388b29b15d91bb08f87a07
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
|
|
Type: fix
Change-Id: Ia362ad821db1fd506e973e1844cc3ec74703cc17
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Use consistent API types.
Type: fix
Change-Id: I416171c729193e64a68e85a3f1f25d03a9a559d1
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Type: style
Change-Id: I8dbf2197b78690b94a346d6ff564648ab42f8235
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I041c011ee955acba656b774049b530efe1d50f22
|