Age | Commit message (Collapse) | Author | Files | Lines |
|
This saves about 20 clocks/packet in both code paths.
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ib559c74bf8168e3ddd764d51b7e5bcd2a557f591
|
|
Type: feature
Ticket: VPP-1920
Change-Id: I6e30f3594cb30553f3ca5a35e0a4f679325aacec
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Change-Id: Ie0cff37b474f8d85a3ae376e0f547a347fb1ad8a
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: refactor
Change-Id: Ic7ddad20088e069887f81721cceb21f4902e8907
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Previously there's a format_ip4_address in format_ip6...
This patch fixes this typo
Type: fix
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Ice124db6594720ed35a992d069341f399c331e1d
|
|
Type: fix
Signed-off-by: jiangxiaoming <jiangxiaoming@outlook.com>
Change-Id: I85a53ee049a9af371d929364400fe166cf71d53f
|
|
type wrong
Type: fix
Signed-off-by: jiangxiaoming <jiangxiaoming@outlook.com>
Change-Id: I539c431d991234c6cebc0961588f5dfbc9caa3c2
|
|
Also fix session test app name registrations
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7d365154ab9af83b17b026762ab4f0aea85ce486
|
|
This introduces a txq structure mirroring the rxq structure.
This fixes the case when #txq > #rxq, because lock must be per txq.
Type: fix
Fixes: dfb19cabe20ccf1cbd1aa714f493ccd322839b91
Change-Id: Ic1bce64d2b08b9a98c8242a1ba1bfcdbda322bec
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I749f36a7062bf9b073c1b6753436c23ba326a5db
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7fb3a4a2ffc4c5f42aa043e3a317b52d7767fb81
|
|
Type: fix
From kernel 4.20, xdp support has been added in tun_sendmsg.
If sndbuf == INT_MAX, kernel executes xdp data path
for tun driver which assumes packets are ethernet frames.
This patch is avoiding the xdp data path in kernel by setting
the sendbuf value < INT_MAX.
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ia4aa54b177b96d56a2d513d18d26ca01d5b88929
|
|
Type: refactor
Change-Id: I04af90b4d86c00092ce1732aeb3c0517af1808e0
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: feature
Signed-off-by: Jan Cavojsky <Jan.Cavojsky@pantheon.tech>
Change-Id: I84776a50b520134e8a3ca6ae41b4cc29009e6319
|
|
Tests for AES-GCM and AES-CBC with different key lengths
Type: test
Change-Id: Ie7eeebb0f7e8331a717866475cb4ee00042857ce
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Signed-off-by: jiangxiaoming <jiangxiaoming@outlook.com>
Change-Id: I3ace7dfe3ddacb4f7fa7a974a2ffe2b3cf902ff9
|
|
Type: fix
Some debugging declarations were wrapped in an 'ifdef CLIB_DEBUG'.
This seems to always evaluate true because clib.h defines CLIB_DEBUG
to 0 if its not defined.
The result is that if a route table is added and a route is added to
it and then the table is deleted, VPP exits because the debug function
fib_table_assert_empty() gets called whether VPP was started using a
debug build or a release build.
Change the ifdef to 'if CLIB_DEBUG > 0'.
Change-Id: I357dc2c299e81b95244f2f7efaadb8e0de27627a
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I60828bc084b9adbb925c306d26060412c410c516
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Idf7e483de0afc95a7579145fb16689e1853b10f9
|
|
Type: fix
The v6 accept mode input feature was being declared with
the node added to ip4-multicast instead of ip6-multicast. Add to
the correct arc.
Change-Id: I08f6e5e7dde84a37687fa0af750a7a16fe537ea6
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: Ib9c5dff6c825f495400a73869d429b9c2df670fc
Type: fix
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Change-Id: I3bcc8ff1cf0a828ce3ba112694d38e3287d38d8d
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: refactor
Change-Id: I8c1f0c02a4522c1f9e461ddadd59938579ec00c6
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: fix
Fixes: a84cb715f5a4366dd2f32de18ad92bec566924da
Change-Id: Id448d6ae9cfdd3122e8187121c509412835117c5
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Change-Id: If8dbbcb46193fd057fe8d704058609a3a8787d6c
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
unformat_ip6_mask wasn't accounting for customized field names
when deciding if it managed to parse at least one field.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I26cab4c6828b510e277079628af5115ac43af3ff
|
|
Type: test
Change-Id: I3e8e451c5deaf04f519a471369370c383d9cda3b
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Signed-off-by: Ryujiro Shibuya <ryujiro.shibuya@owmobility.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie358b731f8ecb1fcaebd6e79f5ce5c10802c2814
|
|
Type: fix
Change-Id: I4f91175444dec9800d651aa5a5e0472359de63d1
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Based on the comments in the struct, udp_encap_t_ is meant to span 2
cachelines. Due to the 64 bit alignment of dpo_id_t, the struct spanned
3 cachelines. This caused fetching ue_ip_proto to trigger an additional
cache miss. This patch rearranges the ordering of the struct fields
so that udp_encap_t_ only spans 2 cachelines as intended.
before:
(gdb) print (int)&((struct udp_encap_t_*)0)->cacheline1
$8 = 128
after:
(gdb) print (int)&((struct udp_encap_t_*)0)->cacheline1
$1 = 64
Type: fix
Signed-off-by: Vadym Martsynovskyy <vmartsyn@fb.com>
Change-Id: I066c08654d4a8ef3e2d3954e957d4c5d382b209f
|
|
Type: fix
Signed-off-by: Chinmaya Agarwal <chinmaya.agarwal@hsc.com>
Change-Id: I9aa5456bf94356e8702fbfd39b14db4c2e74d3e6
|
|
Short Load/Stores combined with prefetching in the beginning of the loop
place too much pressure on AGUs and memory accesses.
The patch interleaves load/store operations with computational operations
to alleviate the pain point.
vlib_get_buffers is also leveraged.
Redefine u8 dst_and_src[12] instead of dst[6] and src[6] in struct
l2input_trace_t in order to merge two copys into one.
Type: improvement
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Change-Id: I7d3df7732c476069235e3019c68f0f53bca9637e
|
|
Type: fix
When accept mode is enabled, a backup VR will configure the VR virtual
addresses locally and respond to packets sent to those addresses. This
did not work when the primary VR is the address owner and sends
advertisements using the virtual address as the source address. It
also did not work when NAT was configured on the interface with the
virtual address as the NAT pool address. In both cases, advertisements
from other VRs would arrive and be dropped because they appeared to
be spoofed - the source address would be an address that is
configured as an interface address on the instance receiving it.
When accept mode is enabled for a VR and the VR enters the master state,
add an input feature on ip[46]-multicast for the interface which looks
for VRRP advertisements, figures out whether they are for a VR which
is configured with accept mode and is in the master state and kicks
them straight to the VRRP nodes to avoid dropping them.
Change-Id: I240ba1ee0b3fd6d693de729698c1181dc71bb08b
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
add test_lacp.py to cover basic lacp unit test
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I6f7f3d801956e54106f3c55cedaca186d81dad25
|
|
Replace speculative buffer enqueue coding model with
vlib_get_buffers(...)/vlib_buffer_enqueue_to_next(...).
Type: improvement
Change-Id: I7dbfac2234a7bd754c599857eb1d5b601da5bc7c
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: docs
Change-Id: Ie7836543e52bee08d12c565fbb6238d3e82ea3ce
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
This patch adds the IPSec ESP/AH type flow support
Have tested on E810 with Intel iAVF driver
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I6ab8e69f67c423cc4e33f3c363881a97cdb98c30
|
|
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I0b1a1ce085ceb75fe139092e40878566682a7986
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ifeae641ec0aa7de74e33e582234505bf6e28ca87
|
|
Type: improvement
Change-Id: I0893d7cd8b8ab9958f585ac564bd0638bc60e78a
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Change-Id: I39341f201209931392f315ead5adfddd8b567caf
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
These gdb macros should prove very helpul when poking around in core files.
Pifi (pool_is_free_index) is not straighforward. Best to work it out
once.
Others:
bitmap_get = clib_bitmap_get
vl = vec_len
pe = pool_elts
node_name_from_index, as described
vnet_buffer_opaque, prints the primary buffer opaque
vnet_buffer_opaque2, prints the secondary buffer opaque
Fix vppinfra unit-test compile error
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Id2a2391a47e5a07cf3757f473e3805cc04784161
|
|
Return error instead of dividing by zero.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I9f6a942e87ab87e8f1921e744ec1add45884e74a
|
|
Type: fix
Change-Id: I92e8e30e4175229e24dd92471016e9095b5cc83e
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Prevent overflow if input network prefix is too small and crash on
packet #1 due to vector not being allocated/initialized.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I3494cc62ce889df48cc59cc9340b5dd70338c3a8
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4f57a776302e11815fcea433ba8cf6724799ff65
|
|
Type: fix
Change-Id: I3df8d3f277bfadee95bfc329e8ce8b929a986af6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Deal with circular macro definitions instead of crashing due to stack
overflow.
Separate macro tables, per CLI session
Add documentation to the Sphinx docs
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I55fc9152bd37ad0c15fa3959f38b07b63100e634
|
|
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I04952865b7e2b447763d0b67d120c3d933177646
|
|
With this change, punt received neighbor advertisements instead of drop
in order to give other elements of the system an opportunity to handle
them.
Type: improvement
Change-Id: Ie6cde9eebc83e42029967141cb32ebc459fd3680
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|