Age | Commit message (Collapse) | Author | Files | Lines |
|
To enable this, applications set the proxy flag in their attach requests
and pass the transport protocols they want to act as proxies for as part
of the attach options.
When proxy is enabled, session rules that point incoming packets to the
proxy app are addedd to the local and global session tables, if these
scopes are accessible to the app. In particular, in case of the former,
the rule accepts packets from all sources and all ports destined to the
namespace's supporting interface address on any port. While in case of
the latter, a generic any destination and any port rule is addedd.
Change-Id: I791f8c1cc083350f02e26a2ac3bdbbfbfa19ece3
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I2feb3e07c3070e8a525c539dd2feffa0dd1bca21
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
|
|
VPP-1034
Change-Id: I02b4db9e52446ab8578df1f011dd27f39de64c70
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
|
|
The VOM is a C++ library for use by clients/agents of VPP for programming
state. It uses the binary APIs to do so. Various other common client side
functions are also provided. Please see om.hpp for a more detailed description.
Change-Id: Ib756bfe99817093815a9e26ccf464aa5583fc523
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Co-authored-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
When adding a filter MAC entry, the default sw_if_index of -1
was incorrectly validated and rejected.
Change-Id: Id7f122b6269ea7c299a4335b05b748afaf01383c
Signed-off-by: John Lo <loj@cisco.com>
|
|
Store and pass MAC address as 6 byte u8 array instead of u64 to
make MAC address handling in set interface MAC endian neutral.
The previous API handler only works for little endian.
Change-Id: Ie4ec33a840bc5122ab1f17e25977e58f3466253b
Signed-off-by: John Lo <loj@cisco.com>
|
|
A bug in the decoder of messages when there was a non-array compound type.
The typical result was an error message from the struct library:
"error:unpack_from requires a buffer of at least 4 bytes"
Change-Id: Ie30fec6fc39b9f4177b54fa4adc4fc69674f0e12
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I25937cd7470c826d1e833e65530ae959c39139d8
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
As per proposal on the mailing list, this patch fixes
the represntation of MAC address in VPP API calls for
· L2fib_add_del
· L2_fib_table_details
Change-Id: I31e17efd1a6314cded69666e693cb8fc33158d02
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: If4a128186a732266eb27b6aa3caf6f1feff449bf
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
VFIO file descriptor is extracted in a hackish way, as DPDK doesn't
provide imethod to retrieve it.
This fixes issue with DPDK drivers not working correctly when IOMMU is
enabled and external buffer memory is used.
Change-Id: I5eaa8e78741c50504d87d44e706b5997c8189554
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I7aafdecd6f370411138e6ab67b2ff72cda6e0666
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Add new cli api: "test lb flowtable flush" which flushes everything.
Call this new cli function after the end of each lb unit test.
Change-Id: I71d04a7bfba398f7d4dd9cc3ed24bba786943663
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Change-Id: I7fe34e99f566dd2e0a36a9ba38f894973989ca8a
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
This is an all-purpose octet-vector memory hash, intended as a
thread-safe replacement for hash_create_mem / hash_create_string. All
u8 * key vectors are memorized by the hash table.
Change-Id: I22944daea8fda07dde8ba118a6529a6d382491f9
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
- The binary API method for executing commands was superceded
by the unix-socket CLI approach used by the C vppctl utility.
The API call it makes will soon be deprecated.
- This Python vppctl script was still being copied to the install
directory, and then later overwritten by the binary vppctl.
Change-Id: I0a4b09b7c733049d0545b4c83b9ac5ac499a7300
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
Change-Id: Ifc0296834e25ddbdd0ad8283c061f309801b053c
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
- message sending method inside synchronization blocks causes
deadlock between sending and receiving part
- breaking atomicity of sending message and putting future with
corresponding id to map needs additional handling by writer and receiver,
regardless which part get access to sync block first will create
new future and second one will complete it and remove from map,
in case of dump calls where control ping reply is required
as confirmation that all information were send, if ping reply is
received before writer put future in map, reader will create
regular control ping future instead and writer needs to made association
between these two futures
Change-Id: Id29a19be7a5319291a5e07cf931080610178f00c
Signed-off-by: Matej <matej.perina@pantheon.tech>
|
|
Build fails on ubuntu 17.10...
Change-Id: I98dfffa3f8f5f9bca2ba97a856709714fbeec49c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Also add vat test code to test the subject API. The format is
sw_interface_set_rx_mode sw_if_index <index> [queue <id>]
<polling|nterrupt|adaptive>
Change-Id: Ib810d85d430077865bead8cc08a070f8ae478225
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: Ib87eccb853cafceea5f5513f6bb51c2364449afa
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
This introduces 5-tuple lookup tables that may be used to implement
custom session layer actions at connection establishment time (session
layer perspective).
The rules table build mask-match-action lookup trees that for a given
5-tuple key return the action for the first longest match. If rules
overlap, ordering is established by tuple longest match with the
following descending priority: remote ip, local ip, remote port, local
port.
At this time, the only match action supported is to forward packets to
the application identified by the action.
Change-Id: Icbade6fac720fa3979820d50cd7d6137f8b635c3
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- Interactive commands like "ping" read extra input from the
input stream.
- In the case of "ping" it is simply a signal to cease the current
operation.
- "vppctl", in non-interactive mode, will issue a "quit" immediately
after the requested command to queue up closing of the session.
- This resulted in "ping" thinking a keypress was seen and returning
control to the CLI; the "quit" command however is consumed by the
keypress event handler and thus the session does not close.
- This patch reworks vppctl slightly to only issue "quit" after the
command has completed. In particular it uses the fact that VPP issues
NUL bytes as a surrogate prompt between output of commands to signal
acknowledgement that the command has completed; vppctl now flags
that the quit should be issued after the next such acknowledgement.
- Since input it still accepted, the user can still terminate the
"ping" early, if desired.
Change-Id: I7e3dbe767f32f8e364ccb5f81799759b311585df
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
Change-Id: I39d634b7691a524e5221c28997a737102298c281
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
>>> CID 178271: Memory - illegal accesses (RETURN_LOCAL)
>>> Using "ep", which points to an out-of-scope variable "_ep".
Change-Id: Icf21e602bc2718bfedd9480e9da41aff8693048e
Signed-off-by: Steven <sluong@cisco.com>
|
|
MACIP ACLs
The classifier tables upper bound of memory was just big enough
to cause the unittests pass most of the time but not always.
Increase the amount of space and run several hundred iterations
of unittests to ensure they always pass.
Change-Id: Ieb7876c6ebdde1f8c5273dbb9b090f12f2c38915
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: Ib0797faaa3f21c7577330bb8d0e801d43e01110e
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
vcom.c:
CID 178227: Logically dead code in vcom.c
vcom_socket.c:
CID 178254: Dereference after null check
CID 178250: Out-of-bounds access
vppcom.c:
CID 178252: Unused value
Suppress vppcom_session_attr() debug output.
Change-Id: I1d47bafb84fc0ad00c642392ae3cb6761fd3fb17
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
- CID 178251 Dereference after null check in vcom_socket.c
- CID 178253 Logically dead code in vppcom.c
Change-Id: I2a24cd53727fec76cf1a6d60f90414ff92567818
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
When creating 32K classify sessions, VPP crashes.
Default heap size is 2MB.
Need to configure it when requiring large number sessions.
Change-Id: I16678ee4a9e0ba61cbd2d3b38c43d10c59325968
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Administratively delete NAT44 session for specific inside/outside addresses and port pair.
Change-Id: If5ab500ac3592c7153d6d8f2cc0297df7309fbc3
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
format()
The vppctl was getting upset with large chunks of info generated
by repeated format() functions, so convert to use vlib_cli_output instead.
Also, refactor the show functionality into smaller functions,
separate from the input handling.
Change-Id: I5d0db5ac45ce4c1b59cd41526b837412e06b1ce0
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I355433e0f07b328c441ed642705b31ca5157fabe
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
warning: passing an object that undergoes default argument promotion
to 'va_start' has undefined behavior [-Wvarargs]
Change-Id: Ic9cfd61e38983bd67f30bf92f605e6c87d103ca5
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Change-Id: I04f1b63e66260d99c0dd180b0295a55a9b750df7
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Make it easier to integrate with external IKE daemon.
IPsec interfaces can have one or both SAs replaced after
creation. This allows for the possibility of setting a
new child SA on an interface when rekeying occurs. It also
allows for the possibility of creating an interface ahead
of time and updating the SA when parameters that are
negotiated during IKE exchange become known.
Change-Id: I0a31afdcc2bdff7098a924a51abbc58bdab2bd08
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Implement recvfrom(MSG_PEEK) by returning data in the provided buffer
without moving the read pointer
Change-Id: Idc1b22632d78e8a499cce7d48c15e8bab0b0bf88
Signed-off-by: Steven <sluong@cisco.com>
|
|
When lldp interface is set, it's better to check valid interface index.
Change-Id: I0db0ab6483ad73d28c69893576aa9b719c3b087c
Signed-off-by: Steve Shin <jonshin@cisco.com>
|
|
Change-Id: If8fb5484b64a5b1c04e34573490fedcf63feabc9
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: Icaf7d7ad47284aea7a56e8006b69f45874d64202
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This fixes compilations on arm platforms.
The call to the function itself was protected, and used clib_xxhash instead.
Only the header protection was missing.
Change-Id: I9fac252a5732e1a9808cf7de93fa3d5f07bcebe6
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Dynamically calculate the required buffer size to pack into based on
message definition. Also add input parameter length checking.
Change-Id: I7633bec596e4833bb328fbf63a65b866c7985de5
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I4164c4c19c8dbfd73e6ddf94a12056325cc093b9
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Use a single physical interface in order to accomplish NAT44/NAT64.
Change-Id: I0c8138953a7a4075df306172e125abad771315e4
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Add support for getsockopt, sendto, and recvfrom. Not all options
for the system calls are supported yet. Only the options used by
curl and wget are supported for now.
Change-Id: I2e0ed7349a0273616b3831c201e7c117725ca287
Signed-off-by: Steven <sluong@cisco.com>
|
|
- CID 178225: Constant expression result
- CID 178220: Logically dead code
- CID 178222: Logically dead code
- CID 178227: Logically dead code
- CID 178223: Same on both sides
- CID 178226: Same on both sides
Change-Id: Ie0c80edb41390cf2308e54938be85d865e292138
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
- Move VCL & VCL-LDPRELOAD source into src/vcl
- Statically link vppcom into libvcl-ldpreload.so
Change-Id: I778300b37e8b06640d9dbc01caf297edf7a6edb7
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: I5c1df59bce7c9654101672a12981e5bd62e9adc4
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- Global variables declared in header files without
the use of the 'extern' keword will result in multiple
instances of the variable to be created by the compiler
-- one for each different source file in which the
the header file is included. This results in wasted
memory allocated in the BSS segments as well as
potentially introducing bugs in the application.
Change-Id: I6ef1790b60a0bd9dd3994f8510723decf258b0cc
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: I1075e5d2a1b6dfe3a443b40b41b8458a30505680
Signed-off-by: Jakub Grajciar <Jakub.Grajciar@pantheon.tech>
Signed-off-by: Jakub.Grajciar@pantheon.tech <Jakub.Grajciar@pantheon.tech>
|