summaryrefslogtreecommitdiffstats
path: root/src
AgeCommit message (Collapse)AuthorFilesLines
2018-10-10vmxnet3: better error handlingSteven2-20/+42
try harder on output - if there is no descriptor space available, try to free up some and check again. make sure we free the buffer if error is encoutered on input. Change-Id: I41a45213e29de71935afe707889e515037cd081f Signed-off-by: Steven <sluong@cisco.com>
2018-10-10Integer underflow and out-of-bounds read (VPP-1442)Neale Ranns2-8/+13
Change-Id: Ife2a83b9d7f733f36e0e786ef79edcd394d7c0f9 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-10L2-flood: no clone for 1 replicationNeale Ranns1-59/+69
Change-Id: If178dd38e7920f35588f5d821ff097168b078026 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-10acl-plugin: reduce the syslog level for debug messagesAndrew Yourtchenko1-5/+6
Change-Id: Ie8380cb39424548bf64cb19aee59ec20e29d1e39 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-10-09vppinfra: Fix extendto_high aarch64 NEON api.v19.01-rc0Sirshak Das1-1/+1
This fixes the l2BD and ip4 test case failures. Fixes VPP-1432, VPP-1428, VPP-1430 Change-Id: I48b5c961bab60cc3b39fcd6db47e098c81579480 Signed-off-by: Sirshak Das <sirshak.das@arm.com>
2018-10-09memif: coverity fixJakub Grajciar1-2/+4
Change-Id: I2b14e2a035a37b04816aac1e610146be58ad1e92 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-10-09API: Spurious timeouts from timeout thread.Ole Troan1-13/+27
Change-Id: I1be1101ba4d82688a32b5ae2c39ca5d92dc244b7 Signed-off-by: Ole Troan <ot@cisco.com>
2018-10-09vnet: ethernet-input incorrectly sets l3_hdr_offset in some casesAndrew Yourtchenko1-26/+26
The issue surfaced when developing the tap GSO code, with an iteration where output path is reliant on vnet_buffer (b0)->l3_hdr_offset being set correctly in the input path, during performance testing. Adding a workaround in the TX path shows that the issue surfaces only for relatively few packets during the test (about 100 out of 600000). Analysis shows the issue arises if the ethernet-input is handling two untagged packets with different sw_if_index values - then the accelerated path punts to slow path, before the setting of the l2.l2_len values is done, thus resulting in them being 0, and l3_hdr_offset being the same as l2_hdr_offset, wreaking havoc on TX path. The solution is to move the l2_hdr_offset calculation into a place where it is done for all the packets, and move the l3_hdr_offset calculation into the determine_next_node() function - as that function is also the one setting the special-case l2.l2_len value for tagged packets and moving the current_data for the L2 case. Change-Id: If728c7715e011930c1887691188c98055bddde67 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-10-08memif: socket filename add/del bugfixJakub Grajciar1-3/+3
Check access rights using effective user/group IDs Change-Id: I3683258c24bcd7817024bffbd56b54b2f596fdd7 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-10-08Adding Multipath support for exclusive DPO based fib path entries via rpathVijayabhaskar Katamreddy2-2/+16
Change-Id: I3c84daf046dbad972b36e48fa2548bbe20c7b338 Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
2018-10-08Fix coverity issue for NSH pluginHongjun Ni1-69/+70
Change-Id: Ie99ff9aebe3c896e3e104a5a7bebd84f7766e713 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2018-10-08Stats: prometheus export coverity errors.Ole Troan1-0/+6
Change-Id: Ibc0a25dcf7d734215e0cffe789b5726f23e1c3d7 Signed-off-by: Ole Troan <ot@cisco.com>
2018-10-08NAT44: do not create session record for identity mapping (VPP-1439)Matus Fabian10-103/+233
Change-Id: I39a3146a4e4ba8eadf50af7113b9ae6b1c1d688f Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-10-08replicate trace fixNeale Ranns1-2/+6
Change-Id: I785ecadbf30812a500629870aa717e64f4cf0cdd Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-07vcl: cleanup and fixes for vcl test codeFlorin Coras8-979/+958
- better approximate time when test finishes - move common vcl and sock test code to vcl_test.h - overall refactor of variable names Change-Id: I8e6b43fc017cd05a0ddaa3891767a44fb300c09e Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-07vcl: use want_tx_evt for ct sessionsFlorin Coras1-5/+4
Change-Id: Id46c651c41b1c633326081583ee3383e27ef475d Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-06bond: active-backup mode is using the wrong load balance algoSteven1-2/+4
active-backup mode is using l2 load balance algo. It should be using active-backup. Also notice that the output is missing a character. vpp# create bond mode active-backup create bond mode active-backup vpp# sh bond sh bond interface name sw_if_index mode load balance active slaves slaves BondEthernet0 6 xor l34 2 2 BondEthernet1 9 xor l34 1 1 BondEthernet2 10 active-backu l2 0 0 vpp# Change-Id: If5ed0cc6c25f6c2ddabec15ff6188b34923d38e3 Signed-off-by: Steven <sluong@cisco.com>
2018-10-05vfio: don't display error if no pci devices are assigned to containerDamjan Marion1-3/+4
Change-Id: I21429ce084cfd39af6a9997b4c1e459f5a6ef672 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-05bond: tx perf improvement, part troisDamjan Marion2-67/+166
Introduce bond_tx_inline which takes lb as a constant for gcc to do the optimization The number appears a tad better for 256 bytes frame. with the patch -------------- Thread 2 vpp_wk_1 (lcore 3) Time 4.3, average vectors/node 224.00, last 128 main loops 40.00 per node 222.61 vector rates in 8.4836e6, out 1.6967e7, drop 0.0000e0, punt 0.0000e0 Name State Calls Vectors Suspends Clocks Vectors/Call BondEthernet0-output active 141054 36109824 0 2.51e1 256.00 BondEthernet0-tx active 141054 36109824 0 2.55e1 256.00 TenGigabitEthernet6/0/0-output active 141054 18055469 0 9.43e0 128.00 TenGigabitEthernet6/0/0-tx active 141054 18055469 0 6.97e1 128.00 TenGigabitEthernet6/0/1-output active 141054 18054355 0 9.54e0 127.99 TenGigabitEthernet6/0/1-tx active 141054 18054355 0 7.05e1 127.99 bond-input active 141054 36109824 0 1.76e1 256.00 dpdk-input polling 70527 36109824 0 5.03e1 512.00 ethernet-input active 141054 36109824 0 6.12e1 256.00 ip4-input active 141054 36109824 0 3.26e1 256.00 ip4-lookup active 141054 36109824 0 2.94e1 256.00 ip4-rewrite active 141054 36109824 0 3.27e1 256.00 without the patch ----------------- Thread 2 vpp_wk_1 (lcore 3) Time 4.3, average vectors/node 224.00, last 128 main loops 40.00 per node 222.61 vector rates in 8.4443e6, out 1.6889e7, drop 0.0000e0, punt 0.0000e0 Name State Calls Vectors Suspends Clocks Vectors/Call BondEthernet0-output active 142744 36542464 0 2.51e1 256.00 BondEthernet0-tx active 142744 36542464 0 2.67e1 256.00 TenGigabitEthernet6/0/0-output active 142744 18270813 0 9.19e0 127.99 TenGigabitEthernet6/0/0-tx active 142744 18270813 0 6.98e1 127.99 TenGigabitEthernet6/0/1-output active 142744 18271651 0 9.43e0 128.00 TenGigabitEthernet6/0/1-tx active 142744 18271651 0 7.02e1 128.00 bond-input active 142744 36542464 0 1.76e1 256.00 dpdk-input polling 71372 36542464 0 5.08e1 512.00 ethernet-input active 142744 36542464 0 6.15e1 256.00 ip4-input active 142744 36542464 0 3.23e1 256.00 ip4-lookup active 142744 36542464 0 2.96e1 256.00 ip4-rewrite active 142744 36542464 0 3.28e1 256.00 Change-Id: I9fd43eda3c735cbff680ac6d2f01ecdae81f0eda Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-05Source VRF Select testsNeale Ranns2-9/+15
Change-Id: Id6c16462fccf890eaa0e526ad048e032c9da8800 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-05NAT: convert remaining clib_warning to nat_log_*Juraj Sloboda4-30/+30
Change-Id: Ie999ab852cc3775ec90820624d97be746d2590a4 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-10-05node_cli: Give the user a hint as to the problem.Paul Vinciguerra1-5/+15
tested with: DBGvpp# show node foo show node: unknown node name: 'foo' DBGvpp# show node error-drop node error-drop, type internal, state active, index 543 node function variants: ... DBGvpp# show node error-drop bar show node: unknown input 'bar' Change-Id: I896cee9e60028a189dce83666fa4d32a14983a7b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-10-05session: fix local session tagging and cleanupFlorin Coras6-9/+11
Change-Id: I0d42a0c71fea7dd669fb1fe5ded7e6e944245c7d Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-05On interface deletion - make sure any vlan qinq table is clearedJohn Lo1-0/+2
Change-Id: Ie9bb1cfce2369b448ca55a21b2f8b8bbbb81c59c Signed-off-by: John Lo <loj@cisco.com>
2018-10-05Improve ip_mroute_add_del documentationIan Wells1-4/+24
Change-Id: Ieb882cc67c37bf591b6c737234263c7c35416e6d Signed-Off-By: Ian Wells <iawells@cisco.com>
2018-10-05vxlan:ip4 decap:remove access to tunnel objectEyal Bari3-183/+190
store local/remote addresses + vrf + vni in hash key store complete decap info in hash value (sw_if_index + next_index + error) this removes the need to access the tunnel object when matching both unicast and mcast. however for mcast handling it requires 3 hash lookups: * one failed unicast lookup (by src+dst addrs) * lookup by mcast(dst) addr . * unicast lookup (tunnel local ip as dst + pkt's src addr) where previously it needed 2: * lookup by src to find unicast tunnel + compare dst to local addr (failing for mcast) * lookup by mcast to find the mcast tunnel Change-Id: I7a3485d130a54194b8f7e2df0431258db36eceeb Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-10-04vcl: fix test throughput computationFlorin Coras1-2/+2
Change-Id: I78260cd1a412e93a5d6686888b6ea17f52245a4a Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-04Support reassembly for fragments coming to ip4-local nodeJuraj Sloboda3-0/+9
Change-Id: I3aa4708c1c3cdda344f282d56b617677080eaaa1 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-10-04acl-plugin: tuplemerge: avoid batch-resize of the applied entries vector - ↵Andrew Yourtchenko1-2/+6
VPP-1352 If the number of rules within a given partition exceeds the limit, the split_partition() might get called, in which we calculate the relaxed mask, create a new partition with that mask and attempt to reallocate some entries from the overcrowded partition. The non-TM code was pre-expanding the vector with rules by the number of rules in the new ACL being applied - which caused the split_partition() to iterate over the rules filled with zeroes. Most of the time it is benign, but if a newly created relaxed partition is such that these entries can be "relocated", then the code attempts to do so, which does not end well. Change-Id: I2dbf3ccd29ff97277b21cdb11c4424ff0915c3b7 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-10-04udp_echo: fix cut-through server modeFlorin Coras3-225/+243
Change-Id: I20dd2071c936eb2c1870d45860553007c8e20587 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-04MFIB-API: when programming an (S,G) fix the grp-lenNeale Ranns1-0/+4
Change-Id: I97052d29080501de53fe95499c860faf0765e81d Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-10-04clib_count_equal_*: don't read of the end of a small array and init data ↵Neale Ranns1-8/+28
only if used (VPP-1429) Change-Id: I8afa57ecca590698d3430746968aa0a5b0070469 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-04VPP-1430: remove unnecessary paddingMarco Varlese1-2/+0
A copy/paste mistake caused to add padding to the buffer used to send data. Change-Id: I04d8dfec4ae195927be1675c5ce8b30230d5b376 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-10-04Fix handling of mpls_tunnel_add_del APIJohn Lo3-23/+79
Handles next_hop_weight, next_hop_preference and next_hop_table_id properly in vl_api_mpls_tunnel_add_del_t_handler(). Also updated vpp_api_test and custom_dump handling of related APIs. Change-Id: I89e211bfa3b9d8ead396b24b3c46b7c7f6511f44 Signed-off-by: John Lo <loj@cisco.com>
2018-10-03vmxnet3: coverity woeSteven2-12/+12
Coverity complains that hb might be null when !prev_b0 is true. It may be right, but not likely. To make the code more explicit when it parses a complete packet, set got_packet = 1 and test got_packet instead of prev_b0 which is somewhat obscure. Use vlib_buffer_free_one rather than vlib_buffer_free_no_next in output.c which takes care of chain buffers. Change-Id: I6e0587605fdc622c3f55fedd74c474666631ed91 Signed-off-by: Steven <sluong@cisco.com>
2018-10-03ipsec: add missing ipv6 ah code & ipv6 testsKlement Sekera4-27/+103
Change-Id: I89e90193ded1beb6cb0950c15737f9467efac1c3 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-10-03session: fix first segment manager cleanupFlorin Coras2-4/+5
Change-Id: I750db7617ff9fd36647743094e0fa855e7dada86 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-03memif: include interface name in logsJuraj Sloboda3-29/+57
Change-Id: I67f58aa93c721dbd518cc2ddcea330006693662f Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-10-03VPP-1440: clean up coverity warningsDave Barach1-2/+2
Change-Id: Ie315d4e83c0575d82aee0369ef50e8dd2dad6a2a Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-03VPP-1426: CLI crash on 'set int feature'Paul Vinciguerra1-1/+1
Change-Id: Ib2221a43347c66940b6b5f71914a451ca4627d2f Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-10-03sock api: fix registrations and client readsFlorin Coras5-28/+69
- When clients connect, instead of returing registration indicies return handles. By convention socket registrations will have the MSB set to 1. This makes it easy to distinguish them from shm registrations. - Fix client reads to allow for messages larger than 4kB (needed for the creat reply wherein the message table is provided). Change-Id: I7bc0a072d066dffbf2e3ad9ba3ed50291231af9d Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-03stat_client.c coverity error.Ole Troan1-2/+0
Change-Id: Ic072beb8882981425f436936f239e8c8bf229a99 Signed-off-by: Ole Troan <ot@cisco.com>
2018-10-03vmxnet3: error handlingSteven4-60/+84
outbound -- if we have to drop the packet due to no descriptor space is available, drop the whole packet, not fragments. inbound -- check and drop error packets Change-Id: Ida1d32e61521bafd67f714d729ad53cd7c487dc6 Signed-off-by: Steven <sluong@cisco.com>
2018-10-03fix format error in show logging config outputJerome Tollet1-3/+6
Change-Id: Idc41a219db185b524f497b096eb71892b5f9ebf8 Signed-off-by: Jerome Tollet <jtollet@cisco.com>
2018-10-02Enabled untagged vs default functionalityMike Bly2-6/+5
Removed 0-tags attribute for default-sub-if config Moved default-sub-if check before untagged Change-Id: I68043445aa2f79846e0743567b9015257fd87f8d Signed-off-by: Mike Bly <mbly@ciena.com>
2018-10-02VPP-1440: clean up coverity warningsDave Barach5-8/+23
Change-Id: Ic6823fb617ecae547a5f0e28b1e037848e40f682 Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-02Stats: vpp_prometheus_export fixes.Ole Troan3-1/+16
- Crash on /sys/nodes if per-node-counters off - Require patterns parameters. Change-Id: If4fddefb17504a92ba462c7af91e373601b66a5c Signed-off-by: Ole Troan <ot@cisco.com>
2018-10-02PAPI: Use UNIX domain sockets instead of shared memoryOle Troan11-151/+427
Adds support for running the API purely across Unix domain sockets. Usage: vpp = VPP(use_socket=True) Change-Id: Iafc1301e03dd3edc3f4d702dd6c0b98d3b50b69e Signed-off-by: Ole Troan <ot@cisco.com>
2018-10-02vcl: fix coverity warningFlorin Coras1-1/+1
Change-Id: I08b0244ba8b0e8a463224b39e1f7b878ba8e4e6f Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-02ip4-local: classify protos that skip csum and src checkFlorin Coras1-13/+38
Makes it easy to add protocols that skip L4 checks. Change-Id: I80ff95685bfa17e29c5800d9c96153cdc7739be2 Signed-off-by: Florin Coras <fcoras@cisco.com>