Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I764c6565f96e0cb9078503e54e3cf3bb3fd9ff3f
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
The code that was manipulating interface names with ifreq was
causing warnings about possible truncation and non terminated
strings.
These are warnings only since kernel would allow a interface
name > 15 characters anyway.
Change-Id: I794a94fe310b8568403d4e3523c61d53468a6f02
Reported-by: Burt Silverman <burtms@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
|
|
Doing strncpy(ifr.ifr_name, s, sizeof(ifr.ifr_name)) will cause
a warning about string truncation with GCC 8 (and other tools).
Fix this by using sizeof(ifr.ifr_name) - 1. Also, there is no
need to manually zero the end of the string since the whole
ifr structure is already zeroed by memset.
Change-Id: I9440d602ecdd9f8592b69bab2e77479146d00d76
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
|
|
Change-Id: I47d021522cfc92cfb3877449333cbf31022c06f4
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
Fixed NAT issues with dropping reverse packets in case NAT worked
in 'endpoint-dependent' mode and outside interface has FIB different
from 0 when the output-feature is set.
In this case, the out2in_ed dynamic hash key was not being created
correctly.
Change-Id: I6362967f4b09a375a4606eedaa8e264795b25453
Signed-off-by: Dmitry Vakhrushev <dmitry@netgate.com>
|
|
Allocate physmem on the same numa
set link speed
cap vmxnet3 support version to 3 if the device supports higher version
Change-Id: Id47dd83b0da53e623fd6cf3ad010e58158b1ab15
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I7d2385b9e9bf5a62f3e9382ca2627a74a4e30785
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I2ef33c7c15b3eb1f55bbfd5cbdd230d6a4d58936
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
Change-Id: I78fe58144fa3ba2e1c7135897a13a2541f235c91
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Some dpdk driver does not support rte_eth_dev_rss_hash_conf_get. When that
happens, we display whatever that was in the stack variable for rss_hf which
is confusing.
The fix is to clear rss_hf prior to the call.
Before the fix
--------------
DBGvpp# sh hard
Name Idx Link Hardware
format_dpdk_device:599: rte_eth_dev_rss_hash_conf_get returned -95
GigabitEthernet13/0/0 2 up GigabitEthernet13/0/0
Link speed: 10 Gbps
Ethernet address 00:0c:29:c4:8c:eb
VMware VMXNET3
...
rss avail: ipv4 ipv4-tcp ipv6 ipv6-tcp
rss active: ipv4 ipv4-frag ipv4-tcp ipv4-udp ipv4-other
After the fix
-------------
DBGvpp# sh hard
Name Idx Link Hardware
format_dpdk_device:600: rte_eth_dev_rss_hash_conf_get returned -95
GigabitEthernet13/0/0 2 up GigabitEthernet13/0/0
Link speed: 10 Gbps
Ethernet address 00:0c:29:c4:8c:eb
VMware VMXNET3
..
rss avail: ipv4 ipv4-tcp ipv6 ipv6-tcp
rss active: none
Change-Id: If8f8327f0012eecc8d23cd7f3f9cc581ca025654
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I7e59ae718d2722c49d42b22a0874e1645a191e89
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I747ca01dc8df9fb5e11168ec46979c4a1f1baa7c
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
Allow to display longer interface names, e.g. VirtualEthernet0/0/0.102
The field length (32) is now the same as for 'show interface'.
Change-Id: I1cb1efd459acb800bfaeeec40b672c8b17cd8c3d
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
Change-Id: I1b327309586c9234a22cda011953a1940d31e1ba
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Given n equals to the maximum number of bytes to copy from src in the API,
or the rough estimate strlen of src, strncpy_s_inline should not copy more
than the number of bytes, computed by strlen(src), to dst if n is greater than
strlen(src). The number of bytes to copy is computed by strnlen(src,n), not n.
Change-Id: I088b46125d9776962750e121f1fbf441952efc2b
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: Ied476c417c8ba5b4d7c615125c36eecd9ca64fbc
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ic65f686aaccaf8450732d88d7471b587faccaa9d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ia34a4278eedc8cf450688b1fa0291e1f976868d3
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Iea64d246008b298edeeae338d781b79362f42046
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I68cc509b594b09751ff5e0e09bbca187a4a88edd
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Change-Id: Ia95a75295e4865b4720573f164ccba8bcc7679ae
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Change-Id: I25b2a28513821bc5eab9ac6890a3964d412b0399
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I640e69388f2ab0f66ad60c5165c749f5a5a9f525
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Remove the needless tests and checks which coverity complains about in
string_test.c
Change-Id: I971650cada77136f06528a65625ef99bd3d7e915
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I26f99d95f52c9fe107d17dcbbf5c6185523beade
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: Ic56ee4ce83b282a5f0f5aed500721fe639b941b3
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- fixes in ip.api for dumping mroute path flags
Change-Id: I13b0cfb15d374250ed71bd4e13dda9b798c18204
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Implement API/CLI to clear IP-MAC tables used for ARP-termination
in the specified bridge domain.
The CLI to flush MAC IP tables for a BD is:
set bridge-domain arp entry <bd-id> del-all
The API added is bd_ip_mac_flush.
Change-Id: I34ceb87c0f480c7102f6559312c24081ed485af8
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I6031f3f9cfa048a901a8424d33d47679115c2eb3
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
PR in openssl community is almost done, and need to change some code in VPP
to align with the openssl interface.
Change-Id: Ic7da53e507b67b53958760d07738dd774b1c526d
Signed-off-by: Ping Yu <ping.yu@intel.com>
|
|
It's not OK to crash due to a transient buffer allocation failure.
Return 1 if the requested operation failed, otherwise 0.
Buffer index parameter change to a value-result, so the caller can
differentiate between partial and complete allocation failure: callers
which request an initial allocation (inbound bi = ~0) need to check
the (out) value to decide whether or not to call vlib_buffer_free(...).
Change-Id: I03029d7f2714c17dca4630dfd95a1eb578b68384
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Set TCP checksum to zero, before calculate the TCP checksum.
Change-Id: Id96743334481804b8ebb74afef2f1dbfed29e0cb
Signed-off-by: Andrej Kozemcak <andrej.kozemcak@pantheon.tech>
|
|
Moves LDP logic that allows sharing of sessions between multi-process
app workers into a separate VCL shim layer. Also refactors LDP to use
the new layer.
Change-Id: I8198b51eae7d099a8c486e36b29e3a0cb8cee8e9
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ib474e2af98d98d54c9fc4070fab56799555c0f31
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
* Provide context information and return meaningful information.
VPPStatsIOError: Stat segment client connection returned: -2 Stat client socket open but couldn't connect.
Change-Id: I14ea35c58452a2cb7598a7efd136f0c7e1f5743a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I3d387b5e2b17f89ed688ea6cfee3fb6d782fe326
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
In case of multi process apps, after forking, the parent may decide to
close part or all of the sessions it shares with the child. Because the
sessions have fifos allocated in the parent's segment manager, they must
be moved to the child's segment manager.
Change-Id: I85b4c8c8545005724023ee14043647719cef61dd
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
The socket API used the socket index handle directly in the sock_delete handler,
resulting in "unknown client id" warnings, and a failure in return for socket clients.
Change-Id: Ia69f740ce0f834cd9b62b7157243a1f42bcad765
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I6732adc06fbb3d4b427e671ddcfe6eabc08d4a1b
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Ater this patch, vcl_test_client and vcl_test_server can work happily with
TLS connection.
"-S" is to indicate TLS connection.
Change-Id: I761894b0b5929912691625f0fe63604725b55978
Signed-off-by: Ping Yu <ping.yu@intel.com>
|
|
Change-Id: If6f4d6404753b2d6b96e17f5414079bcdb9edde8
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I3638221e59024d6b7d82499d57e25b8e609f73cb
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
The aarch64 cross-compiler complains about this when building an
optimized image. So we fix it...
Change-Id: Ib2b2089c0534753d7d470311012fa0073ab27d1d
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Curernt code will overwrite parent_app_api_context, and defer the
setting after this value is used in callback.
Change-Id: Ie16e432fd0f4214e6deff3aa3b58b3be824b0331
Signed-off-by: Ping Yu <ping.yu@intel.com>
|
|
This reverts commit be16020c5034bc69df25a8ecd7081aec9898d93c.
The arm verify job actually failed but the result was overwritten by an x86 ubuntu retry.
Change-Id: Idcae7691fc575053563b8ff8bcad661c15891668
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
* u32/u64/uword mismatches
* pointer-to-int fixes
* printf formatting issues
* issues with incorrect "ULL" and related suffixes
* structure alignment and padding issues
Change-Id: I70b989007758755fe8211c074f651150680f60b4
Signed-off-by: David Johnson <davijoh3@cisco.com>
|
|
Change-Id: I31a3ff9e8f70468196c091027592a3aed2d09ac3
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
When adding an IPsec SA, ipsec_check_support_cb() is called. This
invokes a callback for AH and a callback for ESP to check if the
algorithms are supported.
When using AES-GCM on an ESP SA with the DPDK IPsec backend selected,
the AH callback fails. The DPDK IPsec backend has no AH support,
so the callback for the default OpenSSL backend is invoked. This
checks whether the crypto algorithm is AES-GCM and returns failure.
Only invoke the callback to check support for the IPsec protocol
of the SA - either AH or ESP rather than doing both.
Change-Id: Ic10be6a17b580d06ffb7e82ef5866e53a4f8b525
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: I99c0737dfeeec2db267773625ddc9b55324fd237
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I882b4c495426551fad63372dc106496c5e8c141e
Signed-off-by: Florin Coras <fcoras@cisco.com>
|