Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Id3ad783a7b0321a8fa37b4e606c0c4551ca4edd4
|
|
Add option to use per app private segments for app to vpp message
queues, as opposed to exposing internal message queues segment.
When so configured, internal message queues are still polled by the
session queue node but external app message queues are handled by a new
input node (appsl-rx-mqs-input) that runs in interrupt state. Signaling
of the node, when mqs receive new messages, is done through eventfds
epolled by worker epoll input nodes.
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iffe8ce5a9944a56a14e6d0f492a850cb9e392d16
|
|
Type: fix
Signed-off-by: yedongggang <yedg@wangsu.com>
Change-Id: I5ec690e71fa9119a7bf1cfcb6e36263aa732eff0
|
|
- Refactor make test code to be co-located with
the vpp feature source code
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I66379dfe671628e39dfc9685c4fd70fa0e566f6f
|
|
If configure listen port more than 1 with epoll in nginx, only first
listen port can be registered successed in nginx worker process.
Type: fix
Signed-off-by: nandfan <fanyufei521@outlook.com>
Change-Id: Iec2e058ee972a2cd5b2d1d7d20d373dc17084ce1
|
|
Type: improvement
Change-Id: I1152e58d7bfcb3c4347147f87a834d45ad51cdfe
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Change-Id: I8b273bc3bf16aa360f031f1b2692f766e5fc4613
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I73383eb15186021cd6527d112da8443a0082f129
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: If3da7d4338470912f37ff1794620418d928fb77f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- Refactor make test code to be co-located with
the vpp plugin source code
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I09d55301665449b3f183191537749435f806fb15
|
|
This patch enables ip4, ip6, ip6-n-tuple, l2tpv3 esp ah flows in avf plugin
Type: improvement
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I92c6d4217a6cce4085ee83e8beb4b037c8d7da5f
|
|
Type: improvement
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I24fa52fee88dabad8f0b84446f796ee055819617
|
|
This patch adds the flow support to VPP avf_plugin.
Currently only IP4-N-TUPLE and GTPU flow are supported as
a reference. More flows will be added later.
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I563dbfacecd3eba31e8c3c7769142ea6adba54b6
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I9488ad7e045c908b60b5821d9c48583f6d513c2f
|
|
Sending the bogus acl_add_replace message with count=~0 will result in
an overflow of "expected_len" field which is a u32, thus the message
will pass the validation when it should not.
Solution - make the expected_len a u64 to avoid overflow.
The bug was found while experimenting with libfuzzer as part of
https://gerrit.fd.io/r/c/vpp/+/31763
Type: fix
Change-Id: I4a866d48f2418148236f1b1d77c487b869c7c43d
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
1. When producer invokes svm_msg_q_wait() in svm_msg_q_lock_and_alloc_msg_w_ring(), queue mutex is held by itself.
2. Sometimes, svm msg queue is not full and ring is full, svm_msg_q_wait() do nothing with mutex held, consumer will blocking at svm_msg_q_send_signal().
Type: fix
Signed-off-by: nandfan <fanyufei521@outlook.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ib90b87ab76534cd42e9a4c3e11703e80d93ca678
|
|
Type: fix
Change-Id: I068bfeaf22b9e6cce967c27acdd46d4b8541bdf8
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I17228bd35cc7aa0d207a16502bf1376c75675302
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: fix
|
|
Type: fix
Change-Id: I392d348b1a38affac8761b0614b117cd991958d7
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
This patch introduces a 'program flow' virtchannel event.
The parameter is_add is used to identify adding or deleting the rule from avf
Type: improvement
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I1f5545ddc23e4494a25afa36ff601607405a8c3d
|
|
- Refactor make test code to be co-located with
the vpp feature source code
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: Iceaeab769c08e541b31546663d0e402ced862e5b
|
|
Type: fix
Change-Id: I84d511c30eb5878a1867f5e9d2207a39d4f0926c
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Avoid erroneous double vnet_feature_next if routing buffer manually.
Type: fix
Change-Id: I3f56c12bf57f59a1e5ddad63a2565fa195934cf6
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
This module implement Python access to the VPP statistics segment. It
accesses the data structures directly in shared memory.
VPP uses optimistic locking, so data structures may change underneath
us while we are reading. Data is copied out and it's important to
spend as little time as possible "holding the lock".
Counters are stored in VPP as a two dimensional array.
Index by thread and index (typically sw_if_index).
Simple counters count only packets, Combined counters count packets
and octets.
Counters can be accessed in either dimension.
stat['/if/rx'] - returns 2D lists
stat['/if/rx'][0] - returns counters for all interfaces for thread 0
stat['/if/rx'][0][1] - returns counter for interface 1 on thread 0
stat['/if/rx'][0][1]['packets'] - returns the packet counter
for interface 1 on thread 0
stat['/if/rx'][:, 1] - returns the counters for interface 1 on all threads
stat['/if/rx'][:, 1].packets() - returns the packet counters for
interface 1 on all threads
stat['/if/rx'][:, 1].sum_packets() - returns the sum of packet counters for
interface 1 on all threads
stat['/if/rx-miss'][:, 1].sum() - returns the sum of packet counters for
interface 1 on all threads for simple counters
Type: refactor
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I1fe7f7c7d11378d06be8276db5e1900ecdb8f515
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I35b5ae5a58ab38cc4328f9f438938fab4fbd7942
|
|
Type: improvement
Change-Id: If3b44682e5bbf68b83adc12fb6c71899aecf8a98
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I56dadb852f63da0597ddf4db395a22afdf2d9cc0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I58a7d75da2db0ec84c7c1f08fd1ca7a72946f14d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Don't switch nodes from interrupt to polling state unless adaptive mode
flag set. For starters, flag set only on interface input nodes
with no polling rx queue and at least one in adaptive mode.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ica1c75f605ead82b7cf74c45c6a774461008f054
|
|
Type: improvement
Change-Id: I46459a0c0a79677092aa9f8c92b67c0d06f7242e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
1. added additional checks for pending data in
openssl_ctx_read_tls().
2. fixed read/write typo issues.
Signed-off-by: Sivaprasad Tummala <Sivaprasad.Tummala@intel.com>
Change-Id: Id018c62bb9e02bf0d5f9abf929b6030b965a5d61
|
|
We call vls_epoll_wait with 0 timeout to process unhandled_evts_vector
in ldp_epoll_pwait_eventfd. But vls_epoll_wait will then call
vppcom_epoll_wait_eventfd to process events in event queue. If there are
continuous events to be handled, then libc_epoll_pwait have no chance to be called.
Type: fix
Signed-off-by: wanghanlin <wanghanlin@corp.netease.com>
Change-Id: Ia4f61d0d438a3475bfde9f6715805274671d4e75
|
|
Possibility to draw only the active nodes on the graph.
These are scaled and colored according to their utilization.
Type: improvement
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
Change-Id: I7ddb7b62b3a141cb03750dca24f044138fcc577f
|
|
Type: fix
- the CLI was broken when a nh-table-id was present, since it overwrote
the next-hop address
- bouncing interface state stacked the adjacencies on the tunnel's
destination (which is all zeros)
- don't crash in the switch path if the interface has no hw-address
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I1ba9fdc9b2185899b753a2d40f23afa847a3ef4f
|
|
VppTestCase now has vpp_worker_count property set to number of workers.
This can be overriden by child classes. Also overriden by
VPP_WORKER_CONFIG variable for legacy reasons.
Type: improvement
Change-Id: Ic328bacb9003ddf9e92815767653bd362aa7f086
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: improvement
Signed-off-by: Drenfong Wong <drenfong.wang@intel.com>
Change-Id: Ia81aaa86fe071cbbed028cc85c5f3fa0f1940a0f
|
|
This issue happens if:
- the API client connects via Unix socket
- the client issues the *_dump API call and immediately disconnects
What happens after is that the API handler keeps sending the *_details
messages, however at some point the write fails, and the socket is
deleted.
The attempt of a use of the registration pointer results in interpreting
the socket as a shared memory socket. This results in a crash, because
the data in this structure then does not make sense, like the below:
|
|Thread 1 "vpp_main" received signal SIGSEGV, Segmentation fault.
|__GI___pthread_mutex_lock (mutex=0x0) at ../nptl/pthread_mutex_lock.c:67
|67 ../nptl/pthread_mutex_lock.c: No such file or directory.
|(gdb) bt
|#0 __GI___pthread_mutex_lock (mutex=0x0) at ../nptl/pthread_mutex_lock.c:67
|#1 0x00007ffff500f957 in svm_queue_lock (q=0x0) at /home/ubuntu/vpp/src/svm/queue.c:101
|#2 svm_queue_add (q=0x0, elem=0x7fffa76c2de0 "\210\365\006\060\001", nowait=0) at /home/ubuntu/vpp/src/svm/queue.c:274
|#3 0x00007ffff6e131e3 in vl_api_send_msg (rp=<optimized out>, elem=<optimized out>) at /home/ubuntu/vpp/src/vlibmemory/api.h:43
|#4 send_sw_interface_details (am=<optimized out>, rp=<optimized out>, swif=0x7fffb957a0bc, interface_name=<optimized out>, context=<optimized out>)
| at /home/ubuntu/vpp/src/vnet/interface_api.c:353
|#5 0x00007ffff6e0edeb in vl_api_sw_interface_dump_t_handler (mp=<optimized out>) at /home/ubuntu/vpp/src/vnet/interface_api.c:412
|#6 0x00007ffff7daeb48 in msg_handler_internal (am=<optimized out>, the_msg=0x7fffb839a5e0, trace_it=<optimized out>, do_it=1, free_it=0)
| at /home/ubuntu/vpp/src/vlibapi/api_shared.c:501
|#7 vl_msg_api_socket_handler (the_msg=0x7fffb839a5e0) at /home/ubuntu/vpp/src/vlibapi/api_shared.c:790
|#8 0x00007ffff7d7c608 in vl_socket_process_api_msg (rp=<optimized out>, input_v=0x7fffa76c2de0 "\210\365\006\060\001") at /home/ubuntu/vpp/src/vlibmemory/socket_api.c:212
|#9 0x00007ffff7d89ff1 in vl_api_clnt_process (vm=<optimized out>, node=<optimized out>, f=<optimized out>) at /home/ubuntu/vpp/src/vlibmemory/vlib_api.c:405
|#10 0x00007ffff53bf9a7 in vlib_process_bootstrap (_a=<optimized out>) at /home/ubuntu/vpp/src/vlib/main.c:1490
|#11 0x00007ffff4da0b2c in clib_calljmp () from /home/ayourtch/vpp/build-root/install-vpp-native/vpp/lib/libvppinfra.so.21.06
|#12 0x00007fffa99a4d90 in ?? ()
|#13 0x00007ffff53b6cb2 in vlib_process_startup (vm=0x7ffff56a9880 <vlib_global_main>, p=0x7fffb5d41380, f=0x0) at /home/ubuntu/vpp/src/vlib/main.c:1515
|#14 dispatch_process (vm=0x7ffff56a9880 <vlib_global_main>, p=0x7fffb5d41380, f=0x0, last_time_stamp=<optimized out>) at /home/ubuntu/vpp/src/vlib/main.c:1571
|#15 0x0000000000000000 in ?? ()
|(gdb) frame 3
|#3 0x00007ffff6e131e3 in vl_api_send_msg (rp=<optimized out>, elem=<optimized out>) at /home/ubuntu/vpp/src/vlibmemory/api.h:43
|43 vl_msg_api_send_shmem (rp->vl_input_queue, (u8 *) & elem);
|(gdb) l
|38 {
|39 vl_socket_api_send (rp, elem);
|40 }
|41 else
|42 {
|43 vl_msg_api_send_shmem (rp->vl_input_queue, (u8 *) & elem);
|44 }
|45 }
|46
|47 always_inline int
|(gdb)
|
The approach in this change is to avoid the closing operations "here and
now", but instead mark the the registration as a zombie and place
a forced RPC towards a callback that does the actual cleanup work.
Forced RPC is handled via the API processing loop with barrier sync,
so we are guaranteed not to have any API processing in-process.
Type: fix
Change-Id: I1972d42da620bdb4fd773c83262863c2781d9005
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: improvement
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ic17096c80fbde89f9bb74c29256abbe845130992
|
|
Type: improvement
This patch adds flags to represent the modern NICs capabilities.
Change-Id: I96d38d9ab7eac55974d72795cd100d8337168e1e
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
It is well known that for some NICs, masking
interrupts results in delaying desc writebacks,
which breaks poll mode. This fix introduces an
"int-unmaskable" dpdk device flag to identify such
devices (typically Intel FVL). For such devices,
interrupts are masked by a call to
file_update(...,UNIX_FILE_UPDATE_DELETE) instead
of rte_eth_dev_rx_intr_disable (...)
Change-Id: Ifbc701aebe8572319b7aae19382bd683a47fc3cf
Type: fix
Fixes: 19ff0c3699342b512c03362b3815df684a661f49
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Type: fix
Signed-off-by: Ivan Shvedunov <ivan4th@gmail.com>
Change-Id: I3fdc1711d508bc5b0c2f56b3bd3fb4a56056eb54
|
|
Ensure that dpdk_cryptodev engine async handlers are registered for the set of algorithms supported by all cryptodevices in the system.
Type: improvement
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I8293d87c6f07e935a1a0637704f24918cd3e132a
|
|
Account for occasional instances with the misses rates between caches
are inconsistent.
Type: fix
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: Idfb8bb7543401405cfe04291ad201c28be030cc9
|
|
Add perfmon plugin support to output raw counter and timestamps, both
are useful for debug.
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: Ia5a73d1f05e3464c18991c2346f0ed8b7ef63099
|
|
Type: feature
an client can dump the existing sources, examine their
priorities, then define thier own source.
Usefull if a client wants to distingusih between say, static,
ospf, bgp, etc routes it has added over the API.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I5158b4fa1ebe87381ff8707bb173217f56ea274a
|
|
This functionality is used in make test when DEBUG=gdb is used.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I1339e6460aa624a3bcb4b03db46991590e126f92
|
|
Make code easier to read and debug.
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ib52a4cdd3bcdcc475053aa32af3964c00859e1cd
|
|
Change-Id: Ia304488900bd9236ab4e7cc6f17ae029ee6f2c00
Type: fix
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Type: feature
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I8e48bdcc4c311717e067bb0a4e0b409a2eb8e83d
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
%U format, arguments out of order, etc.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I829a3e5808923f096369ccf6af6386060ee8b62f
|