Age | Commit message (Collapse) | Author | Files | Lines |
|
Commit 6c4dae27e75fc66 broke api_format.c soft link between vat at vpp
api. Probably a make fixstyle issue. Thanks to John Lo for catching
this.
Change-Id: I0567b49fb5c70314d7d6e72f8c9f0f1575948702
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Buffers may be allocated for indirect descriptors by tx thread and
they are freed when tx thread is invoked in the next invocation.
This is to allow the recipient (kernel) to have a chance to process
them. But if the tap interface is deleted, the tx thread may not yet
be called to clean up the indirect descriptors' buffers. In that case,
we need to remove them without waiting for the tx thread to be called.
Failure to do so may cause buffers leak when the tap interface is deleted.
For the RX ring, leakage also exists for vring->buffers when the interface
is removed.
Change-Id: I3df313a0e60334776b19daf51a9f5bf20dfdc489
Signed-off-by: Steven <sluong@cisco.com>
(cherry picked from commit d8a998e74b815dd3725dfcd80080e4e540940236)
|
|
Change-Id: I58598f18b9af70e580be4d28a0c40ec0ffcd5dca
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Icde296e956eb89ea3a17d547f04a833916ec6440
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Error messages:
ERROR:VAPI CPP GEN:Cannot find reply to message `udp_ping_add_del_req'
ERROR:VAPI CPP GEN:Cannot find reply to message `udp_ping_export_req'
ERROR:VAPI C GEN:Cannot find reply to message `udp_ping_add_del_req'
ERROR:VAPI C GEN:Cannot find reply to message `udp_ping_export_req'
Api was *_req/*_resp, but when explicitely declared, the reply should
then have been *_req_reply.
Both api response are empty, so I propose to remove them, and use
autoreply
API changes:
rename udp_ping_add_del_req -> udp_ping_add_del
rename udp_ping_export_req -> udp_ping_export
delete udp_ping_add_del_reply (empty response)
delete udp_ping_export_reply (empty response)
vl_api_version 1.0.0 ->2.0.0
Change-Id: Id3456c8101a7689fbc56dc2d9076625c2b3af0ad
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Depends in musdk 17.10 [1], tested on MACCHIATObin [2] board.
currently only coves PP2.
musdk must be compiled with:
./configure --enable-bpool-dma=64
[1] https://github.com/MarvellEmbeddedProcessors/musdk-marvell
[2] http://macchiatobin.net
Change-Id: I0247a6b860b0a067c54190eae0bd3fe08de234ad
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This is a fixup for the commits on
calc base address on AArch64 based on autodetected VA space size
As reported by: Brian Brooks <brian.brooks@arm.com>
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
Change-Id: Id1bd7b7d7e5c188d8547c46134082bd4563b92db
|
|
Improve "show xxx tunnel" output functions format_xxx_tunnel() for
GRE, VXLAN, VXLAN-GPE, GENEVE and GTPU tunnels to make their output
more consistent and provide better information.
Improved the output of "show int addr" to make its info more
consistent with tunnels and provide fib-index info.
Change-Id: Icd4b5b85a5bec417f8ee19afea336c770ad3b4c5
Signed-off-by: John Lo <loj@cisco.com>
|
|
Fixes the remainig apis that explicitly check svm queue length.
Change-Id: I6055c7c50050affee3098e162e15fb12c205e5db
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I94c7315558ccc9f3d4bcdefd09a696234bc56227
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
This does not update api client code. In other words, if the client
assumes the transport is shmem based, this patch does not change that.
Furthermore, code that checks queue size, for tail dropping, is not
updated.
Done for the following apis:
Plugins
- acl
- gtpu
- memif
- nat
- pppoe
VNET
- bfd
- bier
- tapv2
- vhost user
- dhcp
- flow
- geneve
- ip
- punt
- ipsec/ipsec-gre
- l2
- l2tp
- lisp-cp/one-cp
- lisp-gpe
- map
- mpls
- policer
- session
- span
- udp
- tap
- vxlan/vxlan-gpe
- interface
VPP
- api/api.c
OAM
- oam_api.c
Stats
- stats.c
Change-Id: I0e33ecefb2bdab0295698c0add948068a5a83345
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
If I remember correctly, I added the interface name filter catalog to
avoid cluttering up the vat interface table with [unused] packet
generator interfaces. Since we no longer create pg interfaces we're
not planning to use, the filter catalog does more harm than
good. Every new interface name prefix would have had to be added to
the list, and folks wouldn't likely know they should do that...
Change-Id: I4067f8ba70ad13c8dc5ebaf21a23759a2cf2675e
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Poster-child: 8.8.8.8 resolving mag.ncep.noaa.gov
Change-Id: I600cd0274b9017e9c91817511d3d3366f0bd02b9
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I3ce014da7b514aa766a90cacddd76cd2247406a8
Signed-off-by: Billy McFall <bmcfall@redhat.com>
(cherry picked from commit bbdfeaebf25525a55d9a87ba4c0f789c176cc7bf)
|
|
Add option to NAT44 load balancing static mapping API/CLI to make rule asymmetrical (rule match only in out2in direction).
Change-Id: I325ecef5591e4bf44ce4469a24d44fe56c3bb2e9
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Ib99058323c50f20fcdb44185aee027c5c6ef8c91
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: Ifcca60da3f77c0a4959f98b3365c846badbdc2d0
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
fix proposal for aec8f8984771cabc79a8ed64f56afcf61465d00a
* fix 0/1 bit count
* fix memory leak
Change-Id: I488229917c463be10b8a5a1b0a3d7723f05061d0
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Change-Id: I55d9953851062f7106c66701d46bcd9073cf1ee4
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: If9e9e4fc348d20396713d9017100dda63a107edb
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
At least when testing against "known good" DNS servers: it turns out
that sending 2x requests - one for an A-record and another for a
AAAA-record - seems to work better than sending a single DNS_TYPE_ALL
request.
Fix c-string vs. u8 vector mistakes. Fix server failover.
Change-Id: I26554f0a9c1744376f21372506ebec8658e351e2
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I7487eb74b8deebff849d662b55a6708566ccd9ef
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
provide one label stack per fib_table_entry_path_add2 call. otherwise multiple mheap releases take place.
Change-Id: I475ca1b801fc85dddda0b540c69ad628a274df7f
Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
|
|
Change-Id: I972b7d264e612ab04eb4671253f3654a76578e1c
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
|
|
Packets with a SR policy of one SID list create a malformed packet.
Outer IPv6 header points to a routing extension header that does not
exist since the SID list contains only one SID.
Change-Id: I1effee0457453bab95706a8a24fdabfbd843d5b7
Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
|
|
Change-Id: I056598a1818a39c2da73e252600c14585e5aae83
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
On rx, the ENA PMD sets tx offload flags based on the
received packet's l4 protocol. This means you need
to turn off those offloads for every packet if you
encapsulate packets arriving on an interface using
that PMD. Disable this behavior.
Change-Id: Icae9f32e3d292d767da440ae5c1280902bdaa083
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Coverity complains about divide by zero if tx_queues gets the value of 0
from the macro vec_len(). While we don't anticipate such condition to
happen, programming errors may exist. To defend against divide by zero,
crash and burn if tx_queues gets a value of 0.
Change-Id: I65e014c07e9d4adfe119d5b373b5dc24cb818a03
Signed-off-by: Steven <sluong@cisco.com>
|
|
This reverts commit 4363ad6c96b5641fca1b16c5a6ec22e2364adcfd.
Change-Id: Ie71ee265659e06ada37f40cfceed4c20b1cbf6e5
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
- separate client/server code for both memory and socket apis
- separate memory api code from generic vlib api code
- move unix_shared_memory_fifo to svm and rename to svm_fifo_t
- overall declutter
Change-Id: I90cdd98ff74d0787d58825b914b0f1eafcfa4dc2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
override the default CXXFLAGS (which provides a -O2) with the
system set CFLAGS (providing -O0/-O2 for debug/release builds)
Change-Id: Ic84e51baafdc22d37139303566d705d759e36721
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Follow up fix - vl_api_gre_add_del_tunnel_t_handler should pass
outer_fib_id from API message to vnet_gre_add_del_tunnel() and
not convert it to fib_index, since vnet_gre_add_del_tunnel()
already perform the lookup to get fib_index from fib_id.
Change-Id: I24967a97f82ce018ddef596e556bd3eb1706cb63
Signed-off-by: John Lo <loj@cisco.com>
|
|
- rename l2_bridged to is_dvr. Including on the ip.api
this was new in the 18.01 release so no compatability issues.
- steal the free space in vnet_buffer_opaque_t for use with flags.
- run the ipX-output feature arc from the DVR DPO
Change-Id: I040e5976d1dbe076fcdda3a40a7804f56337ce3f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ie291468ea9d05c47cefe39c4ff7fea3e016bacf2
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Iddd754d00ace3d042336e5c2c40431566275051a
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I123259c131f1bd16c70990bf7f48d9a275c53ce2
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: Ib90dc5613c9fdac0344b3bd7f163e2f7163c64d8
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I5e080d69f28661cc0b1846885d5001526b54fbd9
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Combine implementer, part, variant, and revision into one cpu
description line.
For example : ARM (Cortex-A57 PASS 1.2)
* get infos from /proc/cpuinfo
* only recognize armv8 processors
* add all given cavium processors
* Cavium starts counting variants from 1 instead of 0
Change-Id: I4f3820fb13a6bd2a0dc59e28fbe6f48a5b0ceb25
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
- WIP: taking a LARGE patch and breaking into smaller chunks
- large LDP/VCL refactor in progress. This minimizes rebase.
- LARGE patch removed clib_warning()s erroneously
- VPPCOM_DEBUG checks duplicated deliberately as clib_warning()
usage will be refactored.
Change-Id: I5905ed074187fe22c9f1320fd07ffcaab3a0f63c
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
|
|
The code path in src/vnet/gre/interface.c uses fib_id as a
component to generate hash key for GRE tunnel. This should be
fib_index as the GRE rx/decap data path will be using fib_index
to generate the hash key to lookup the GRE tunnel.
Change-Id: Ia7f0892d84f9dac79223a6e016775892b61eb5fb
Signed-off-by: John Lo <loj@cisco.com>
(cherry picked from commit 72247c803250894834d15952a6fddcd8f4a39a9c)
|
|
Change-Id: I66ae618edaa12c2b4e4afe276da689673b02c9cd
Signed-off-by: zhaoqingling <zhao.qingling@zte.com.cn>
|
|
Change-Id: I2032b5fc8e1904005b8eb871b9be06d025ed9b71
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- add function to sock client that bootstraps shm api
- allow sock clients to request custom shm ring configs
Change-Id: Iabc1dd4f0dc8bbf8ba24de37f4966339fcf86107
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Move the functions hash_set_key_copy() and hash_unset_key_free()
which are dupilicated in various tunnel support code modules to
hash.h as hash_set_mem_alloc() and hash_unset_mem_free() to be
used by all.
Change-Id: I40723cabe29072ab7feb1804c221f28606d8e4fe
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I24e7a26972bbbfcea100292b212b29ae7a349335
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: I2e311f8b7f50133678b9172e8d071826af491609
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: Id6607adbe5da8ae8472dde8bb442ca5f68f6d84f
Signed-off-by: zhaoqingling <zhao.qingling@zte.com.cn>
|
|
Change-Id: Ic55ad2e0a1435f552ce84ed1a9b1981191bc178b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: If16943e564b11ff7ac456b16896c62db1152d6dd
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|