Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
As per the protocol:
A handshake initiation is retried after "REKEY_TIMEOUT + jitter" ms,
if a response has not been received...
Currently, if retransmit handshake timer is started, it will trigger
after "REKEY_TIMEOUT + jitter" ms and will try to send a handshake
initiation via wg_send_handshake() given that no responses have been
received. wg_send_handshake() will verify that time stored in
REKEY_TIMEOUT has passed since last handshake initiation sending and if
has, will send a handshake initiation. Time when a handshake initiation
was last sent is stored in last_sent_handshake.
The problem is that last_sent_handshake is not only updated in
wg_send_handshake() when sending handshake initiations but also in
wg_send_handshake_response() when sending handshake responses. When
retransmit handshake timer triggers and a handshake response has been
sent recently, a handshake initiation will not be sent because for
wg_send_handshake() it will look like that time stored in REKEY_TIMEOUT
has not passed yet. Also, the timer will not be restarted.
wg_send_handshake_response() must not update last_sent_handshake,
because this time is used only when sending handshake intitiations. And
the protocol does not say that handshake initiation retransmission and
handshake response sending (i.e. replying to authenticated handshake
initiations) must coordinate.
With this fix, stop updating last_sent_handshake in
wg_send_handshake_response().
Also, this fixes tests that used to wait for "REKEY_TIMEOUT + 1" seconds
and did not receive any handshake initiations. Then they fail.
Also, long-running tests that send wrong packets and do not expect
anything in reply may now receive handshake intiations, consider them as
replies to the wrond packets, and fail. Those are updated to filter out
handshake initiations in such verifications. Moreover, after sending
wrong packets, error counters are already inspected there to confirm
packet processing was unsuccessful.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I43c428c97ce06cb8a79d239453cb5f6d1ed609d6
|
|
The previous patch[37164] was a bit flawed.
Type: fix
Signed-off-by: Yacan Liu <liuyacan@corp.netease.com>
Change-Id: Ia9d8b9c7853e8f4b960ce7de26d0384243deb667
|
|
Type: improvement
Change-Id: I7f7050c19453a69a7fb6c5e62f8f57db847d9144
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Change-Id: I6edbff9a02fcb3c592ccfe8f47ddb3f848be1b6d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Outgoing packets can be now traced via:
trace add bfd-process <count>
Type: improvement
Change-Id: Ia19af6054289b18f55e518dbea251a2bee9b9457
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
|
|
This patch introduces fast path matching for inbound traffic ipv6.
Fast path uses bihash tables in order to find matching policy.
Adding and removing policies in fast path is much faster than in current
implementation. It is still new feature and further work needs
and can be done in order to improve the perfromance.
Type: feature
Change-Id: Iaef6638033666ad6eb028ffe0c8a4f4374451753
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
|
|
Type: docs
Change-Id: Icfa2bdc9367f8438b53da7c89caec263ed6ab056
Signed-off-by: Filip Varga <fivarga@cisco.com>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
This adds the ability to specify we want an IPv4 route via an IPv6 adj
and vice-versa.
Type: improvement
Change-Id: I5f7f1ab89fc60244d31c26155bbd9b0db690257c
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
When manually adding neighbor entries for proxy-arp, those will be
fib-adj entries. Check for proxy-arp instead of dropping immediately.
Type: improvement
Change-Id: Id311159f2966c99719dc2a67d4d2bc92bf366029
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
When ESTABLISHED TCP connection is terminated by an RST packet,
EPOLLHUP + EPOLLRDHUP would be updeliever by VCL. If not using
VPP, app would receive EPOLLHUP + EPOLLERR + EPOLLIN(if requested) +
EPOLLRDHUP(if requested).
libevent will interpret the two cases as different EV combinations.
Below is the code snippet for libevent v2.12:
if (what & EPOLLERR) {
ev = EV_READ | EV_WRITE;
} else if ((what & EPOLLHUP) && !(what & EPOLLRDHUP)) {
ev = EV_READ | EV_WRITE;
} else {
if (what & EPOLLIN)
ev |= EV_READ;
if (what & EPOLLOUT)
ev |= EV_WRITE;
if (what & EPOLLRDHUP)
ev |= EV_CLOSED;
}
Type: fix
Signed-off-by: Yacan Liu <liuyacan@corp.netease.com>
Change-Id: Ice3d2861183b6ea499f66b727bbe175eeae5cb05
|
|
Type: fix
Change-Id: Ib127331507724f853071e66ca1ddfc773a8ed200
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
It's known there're one or more 32-bit increments in the ip
header. So just check ip router alert option length with minimal
performance impact, and don't care of the total options length.
Type: fix
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Signed-off-by: Dmitry Valter <d-valter@yandex-team.ru>
Change-Id: I46dd06516f793846b931a1dc8612f2735f8d24d3
|
|
Also check for non-zero rpath length in CLI cmd.
While there, no need to use "else" after a return.
Also while there, notice and fix numerous input_line
buffer leaks and fix them.
Type: fix
Fixes: 669d07dc016757b856e1014a415996cf9f0ebc58
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Change-Id: I18ea44b7b82e8938c3e793e7c2a04dfe157076d8
|
|
Type: fix
Change-Id: I4eb2a7190de90553c91133f940e068ed649120cb
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
If an attempt is made to delete a teib entry and the entry does not
exist, a message is logged. The format string contained an extra "%U",
which results in a segv.
Change-Id: I9b1d6ba63601982ba6ac8607cf710e34c311702a
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
When we follow arp feature arc for proxy-arp, we should still update
the error reason in case proxy-arp cannot handle the arp request and
drops it.
Type: improvement
Change-Id: I046df017ca2056cfc12af0f0a968b401058bcd6d
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
If unrecognized input was provided to the commands which add or delete a
pair, the error message was being created incorrectly and only displayed
something like "unknown input `'". Provide the correct argument to
format_unformat_error so that the actual unrecognized input is printed.
There also was no error or useful information printed if only the base
command were provided without any additional arguments. This should
print a warning about what required data was missing. Reorganize code to
handle this and to make sure that memory gets freed appropriately.
Change-Id: If454714f50cf41b3b56cfadfbf017f1d160e13a4
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Handle the case of the mapping not being found by GID.
Type: fix
Change-Id: Ibce3b9e8419c0dddca97b4d0d5a71f25dfd529d8
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I21a701a556b88a9d81f0e074a59fa34b3746b1d9
|
|
add hugepage for vcl configure and svm
Type: feature
Signed-off-by: Junfeng Wang <drenfong.wang@intel.com>
Change-Id: I6a8905e3fec23d840e629114b1e5a403d0a258ef
|
|
add dma support to session, acclerate host-stack with dma
Type: feature
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Signed-off-by: Junfeng Wang <drenfong.wang@intel.com>
Change-Id: I3d492921d69d9e3e0b34d33adc33fba3bde9e1cc
|
|
If one attempts to add a pattern with zero length, first time
it will succeed, and the second time it will cause an invalid memcmp call.
Solution: do not allow to add zero-length patterns.
Type: fix
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: Ic08e021486153be605a4b12a2fe4422307bf68d2
|
|
The number of available dynamic ports is set to (0xffff - 1024) =
64511, which is not divisable by the pow2 number of workers - the
only integer divisors are 31 and 2081.
So, total dynamic port range of all workers will be less than it:
1 wrk: n = (port_per_thread = 64511/1)*1 = 64511 + 1025 = 65536
2 wrk: n = (port_per_thread = 64511/2)*2 = 64510 + 1025 = 65535
4 wrk: n = (port_per_thread = 64511/4)*4 = 64508 + 1025 = 65533
8 wrk: n = (port_per_thread = 64511/8)*8 = 64504 + 1025 = 65529
...
As seen, with multiple workers there are unused trailing ports for every
nat pool address and that is the reason of out-of-bound index in the
worker array on out2in path due (port - 1024) / port_per_thread math.
This was fixed in 5c9f9968de63fa627b4a72b344df36cdc686d18a, so packets
to unused ports will go to existing worker and dropped there.
Per RFC 6335 https://www.rfc-editor.org/rfc/rfc6335#section-6:
6. Port Number Ranges
o the System Ports, also known as the Well Known Ports, from 0-1023
(assigned by IANA)
o the User Ports, also known as the Registered Ports, from 1024-
49151 (assigned by IANA)
o the Dynamic Ports, also known as the Private or Ephemeral Ports,
from 49152-65535 (never assigned)
According that let's allocate dynamic ports from 1024 and have full port
range with a wide range of the workers number - 64 integer divisors in
total, including pow2 ones:
1 wrk: n = (port_per_thread = 64512/1)*1 = 64512 + 1024 = 65536
2 wrk: n = (port_per_thread = 64512/2)*2 = 64512 + 1024 = 65536
3 wrk: n = (port_per_thread = 64512/3)*3 = 64512 + 1024 = 65536
4 wrk: n = (port_per_thread = 64512/4)*4 = 64512 + 1024 = 65536
5 wrk: n = (port_per_thread = 64512/5)*5 = 64510 + 1024 = 65534
6 wrk: n = (port_per_thread = 64512/6)*6 = 64512 + 1024 = 65536
7 wrk: n = (port_per_thread = 64512/7)*7 = 64512 + 1024 = 65536
8 wrk: n = (port_per_thread = 64512/8)*8 = 64512 + 1024 = 65536
...
Modulo from 5c9f9968de63fa627b4a72b344df36cdc686d18a is still required
when the numbers of workers is not the integer divisor of 64512.
Type: fix
Fixes: 5c9f9968de63fa627b4a72b344df36cdc686d18a
Change-Id: I9edaea07e58ff4888812b0d86cbf41a3784b189e
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
|
|
Type: fix
Signed-off-by: luoyaozu <luoyaozu@foxmail.com>
Change-Id: Ibfebe4da0197d1f60bf9edd3873fe1f776b680a4
|
|
Type: improvement
Change-Id: I371237803e2c3cb0e1b42b94f422867465e2bff6
Signed-off-by: Damjan Marion <dmarion@me.com>
|
|
Type: feature
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: I4e03f60f34acd7809ddc5a743650bedbb95b2e98
|
|
Type: improvement
Change-Id: I2f3fab893a10b060f91b07ee17b8727d241830ea
Signed-off-by: Damjan Marion <dmarion@me.com>
|
|
This patch introduces fast path matching for inbound traffic ipv4.
Fast path uses bihash tables in order to find matching policy. Adding
and removing policies in fast path is much faster than in current
implementation. It is still new feature and further work needs
and can be done in order to improve perfromance.
Type: feature
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: Ifbd5bfecc21b76ddf8363f5dc089d77595196675
|
|
DPO in the new copy was not locked ...
Type: fix
Fixes: 0bfe5d8
Change-Id: I39f1368de459af91c4bb857d98a4b531bd5692a6
Signed-off-by: Damjan Marion <dmarion@me.com>
|
|
Free node frames in worker mains on refork. Otherwise these frames are
never returned to free pool and it causes massive memory leaks if
performed under traffic load
Type: fix
Signed-off-by: Dmitry Valter <d-valter@yandex-team.ru>
Change-Id: I15cbf024a3f4b4082445fd5e5aaa10bfcf77f363
|
|
Type: improvement
Change-Id: Idf1fb054d5ff495d772d01a79cbc6cd1b409d377
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
When a session is found expired, the next node of in2out fast path
should be in2out slow path instead of out2in slow path.
Type: fix
Signed-off-by: Jing Peng <jing@meter.com>
Change-Id: If1dd920502089c25b33bea5434823b0496a44499
|
|
Type: improvement
Change-Id: I7f52222706200c31a731fadfb84513549ccb532d
Signed-off-by: Damjan Marion <dmarion@me.com>
|
|
Type: improvement
Roaming functionality allows the peer address to change. The main thread
was being called to update a peer's address if necessary after
processing a received packet. Check in the worker whether this is
necessary before incurring the overhead of the RPC to the main thread.
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Change-Id: I02184b92dc658e0f57dd39993a3b2f9944187b45
|
|
The ability to modify the vlan setting must be checked prior to using
VIRTCHNL_OP_DISABLE_VLAN_STRIPPING_V2 both for inner and outer vlan
stripping
Change-Id: Iffe306c34b81a6077ad6ba5deb3f5b61b5475897
Type: fix
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Originally initialization cryptodev device(s) calls double request
to enabled async mode and increased ref count twice for async mode.
Due to this cannot be change any assigned async handlers to other
async crypto engine.
The fixes reduce double request to enable async mode in initialization
cryptodev device(s) and VPP can be change assigned async handlers
to other crypto engine after disabled all async feature, for example:
ipsec, wireguard.
Type: fix
Signed-off-by: Gabriel Oginski <gabrielx.oginski@intel.com>
Change-Id: If22e682c3c10de781d05c2e09b5420f75be151c3
|
|
test output before fix:
DBGvpp# vrrp proto start sw_if_index 1 vr_id 1
vrrp proto: unknown input `sw_if_index 1 vr_id 1'
DBGvpp# vrrp vr track-if add sw_if_index 1 vr_id 1 track-index 1
priority 30
vrrp vr track-if: Please specify an interface
Type: fix
Signed-off-by: luoyaozu <luoyaozu@foxmail.com>
Change-Id: Ib8ba67e920b23008d9246318ec8f8f17bf0bea95
|
|
client_pathname is usually smaller than pc->caddr.sun_path. snprint()
ensures we stop at the NULL character or sizeof(sun_path) whichever
comes 1st. It also guarantees NULL character termination.
Type: fix
Change-Id: I9fc2a706beab931d50d32d03f7fafca7c6c2fb0b
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
cmake MATCHES directive with the empty regex "" always match, including
non-empty strings.
Type: fix
Fixes: 534dfc1f18db74f4a2c78d62fe6893daba56dc86
Change-Id: If085b29da15a6d7fc680cebb823183fd3c7eea68
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
zero-initialize the variables
Type: fix
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: I51c3856865eab037f646a0d184e82ecb3b5b3216
|
|
Store mss and sw_if_index to udp_connection_t and display them via
show sessipn verbose 2
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I32928f3f4195b178873dc1bada702e035d99c464
|
|
Zero-initialize a variable.
Type: fix
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: Iccf2eb4bf26755d6cd93fc70df3c5481d69ce7eb
|
|
Zero-initialize the variable
Type: fix
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: I4ee127ac3e2a3beffa11bbc96db1f3254b3f7c5d
|
|
Initialize the session index in case of error to ~0,
so is defined in case trace needs to copy it.
Type: fix
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: Iddf6df42c09d2abc11e5821944eb4f41692e6e3e
|
|
It may contain garbage in debug builds resulting in wrong
gho detected flags and offsets.
Type: fix
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Change-Id: Ia79633262185016f527e7dc6c67334cda6f055f2
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I0a58c0f54d8be31a0a78bef00152fb2cc193840e
|
|
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I8d84dc8b7f5c5e863c32838cfafc3d366e2a7e00
|
|
Mark arp packet as locally originated when probing/replying and don't apply any
arp-term logic against it.
Type: fix
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
Change-Id: I305ff5cac8cac456decf92f21b961aa4ce286079
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic81702bffb5b3189db48efe1ab3b237fa2bf75f2
|
|
The unformat type for "%d" should be u32 or int, otherwise the 'did' in
high stack address will be overflow to zero by the 'qid' which is in the
low stack address.
Like input "dev wq3.2" will return "did=0, qid=2".
Type: fix
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Change-Id: I0fe1d5b03e2c47e0a7925193e2c2f1ccc31d3e90
|