Age | Commit message (Collapse) | Author | Files | Lines |
|
This patch achieves complete separation of
endpoint-dependent and endpoint-independent IPv4 NAT
features. Some common stuff is also moved to NAT
library.
Type: refactor
Change-Id: I52468b7e2b5ac28958a2baf8e2ea01787322e801
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ic25ffe9c8e37826733cfb9e62cefb491bb3322bc
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I755e6da1fcf6f3bf3c72d6d36c4243b0919b7209
|
|
The move from ip4(6)_src_address_for_packet to fib_sas4(6)_get changed
the behavior, so that the new looked only to adjacent gleans. This
caused a problem for destinations routed according to FIB table.
To reproduce:
vpp# create tap
vpp# set interface state tap0 up
vpp# set interface ip address tap0 192.168.11.1/24
vpp# ip route add 192.168.20.0/24 via 192.168.11.2
linux$ sudo ip addr add 192.168.20.1/24 dev lo
linux$ sudo ip link set tap0 up
linux$ sudo ip addr add 192.168.11.2/24 dev tap0
vpp# ping 192.168.20.1
Failed: no source address for egress interface
Type: fix
Signed-off-by: Július Milan <julius.milan@pantheon.tech>
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I22899f4dbbf8c1c85ccce72f801b92c183195b5d
|
|
explicit null dereferenced
Type: fix
Signed-off-by: Artem Glazychev <artem.glazychev@xored.com>
Change-Id: Id1e4b0e048dbd0a68063c63374172ab6d3653aff
|
|
Type: improvement
Also:
- state as enum so my GDB life is easier
- typo; s/indice/indices/;
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I3320f5ef1ccd7d042071ef336488a41adfad7463
|
|
- "PNAT: 1:1 match and rewrite programmable NAT" link
was hanging out on the top level of the doc tree.
Move it to VPP->Developer Documentation.
Type: fix
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: Iadb7d3463567a2414eece68db0a3743237ab26f9
|
|
Coverify complains deref_ptr before null check.
deref_ptr: Directly dereferencing pointer reg.
1214 vl_reg = vl_api_client_index_to_registration (reg->client_index);
1215 ALWAYS_ASSERT (vl_reg != NULL);
1216
CID 216104 (#1 of 1): Dereference before null check (REVERSE_INULL)
check_after_deref: Null-checking reg suggests that it may be null, but it
has already been dereferenced on all paths leading to the check.
1217 if (reg && vl_api_can_send_msg (vl_reg))
I believe the check is for vl_reg instead of reg because vl_reg may be NULL
after the call vl_api_client_index_to_registration.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ic4eb2284e65c48396f20d5024a4241c80c70c886
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I907b2e560d6ecd748aa7c6d775c4f7122a39b4cb
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: If8840d455f8841264136adb19cc9a2046ba37b11
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id9f922eafe4a68661d2858d72fc548a372e9596a
|
|
When a buffer is freed and re-allocated for a new packet, opaque2 is
not reset, so the offload flags can be set to a stale value.
Make sure the offload flags are reset to the current value on 1st set.
Type: fix
Fixes: 6809538e646bf86c000dc1faba60b0a4157ad898
Change-Id: I4048febedf25b9995dbd080a11495ee7dbe59153
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
The old_sa is rewrite with vls_intercept_sigchld_handler when parent
process fork child second time, parent process will call
vls_intercept_sigchld_handler recursively when received child signal.
Type: fix
Signed-off-by: nandfan <fanyufei521@outlook.com>
Change-Id: Ia58a254d58058489aa2d91b76a3b3cab1e38f802
|
|
I noticed the memory leak while sending a lot of cli_inband APIs:
DBGvpp# memory-trace on main-heap
... send a lot of API cli_inband ...
DBGvpp# show memory main-heap
Thread 0 vpp_main
base 0x7f85c8302000, size 1g, locked, unmap-on-destroy, name 'main heap'
page stats: page-size 4K, total 262144, mapped 33129, not-mapped 229015
numa 0: 33129 pages, 129.41m bytes
total: 1023.99M, used: 125.78M, free: 898.22M, trimmable: 897.59M
Bytes Count Sample Traceback
9751632 145034 0x7f85d01696e8 clib_mem_alloc_aligned_at_offset + 0x80
vec_resize_allocate_memory + 0xa8
_vec_resize_inline + 0x240
va_unformat + 0xe4
unformat + 0x159
vlib_cli_dispatch_sub_commands + 0x11e
vlib_cli_input + 0x8f
vl_api_cli_inband_t_handler + 0xd9
vl_msg_api_handler_with_vm_node + 0x488
void_mem_api_handle_msg_i + 0x6f
vl_mem_api_handle_msg_main + 0x38
vl_api_clnt_process + 0x28d
9723904 145034 0x7f85cd677238 clib_mem_alloc_aligned_at_offset + 0x80
vec_resize_allocate_memory + 0xa8
_vec_resize_inline + 0x240
unformat_init_string + 0x10d
vl_api_cli_inband_t_handler + 0xc1
vl_msg_api_handler_with_vm_node + 0x488
void_mem_api_handle_msg_i + 0x6f
vl_mem_api_handle_msg_main + 0x38
vl_api_clnt_process + 0x28d
vlib_process_bootstrap + 0x5d
0x7f8608b0e038
290077 total traced objects
Solution: free the input data structure.
Type: fix
Change-Id: I42de5572e8760237e793a53c1a94bce65a4ac5fa
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I412024731c1f561680736ad7bfabb99b595e3dff
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I639560ee3dd0a1d605ec2866dce5cdd13fda8201
|
|
Type: fix
Signed-off-by: wanghanlin <wanghanlin@corp.netease.com>
Change-Id: I800cfffb07bf7d4c4d1454b73febdba03f7d6b75
|
|
Type: improvement
Signed-off-by: Ivan Shvedunov <ivan4th@gmail.com>
Change-Id: I77ade50425e88d2da979f732d2248bed383f4ba4
|
|
Ensure chunk alloc distribution is maintained on fifo detach.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5aa5524e06a703dc50e90da6d177663d2d997aa4
|
|
Type: fix
This patch fixes the missed crypto and integ offset update for
every packet. Previously the offset is updated only when the
key is changed. This is ok for encryption but not always true
for decryption.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: Iccd0011f4ae488746ce487a14b94ddd24fb0c07c
|
|
Test worker thread handoff on an interface input policer.
Type: test
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: I1deddcc9711bccfde377290bc66a00f2cd4163e1
|
|
Add worker thread handoff for policers on the device input feature arc
on an interface.
Type: improvement
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: Ib795457a09a5b3be3c4e6422c91e33100192b8e2
|
|
The IP punt policer currently checks if it needs to do worker thread
handoff based on the thread index stored in the policer. Move this
functionality into the policer code so it can be common for all users
of the policer.
Type: improvement
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: Ia8d11e62898a58b19d7b27b296f8369baa3e5aa1
|
|
Apply a policer to an interface, check it's policing packets.
Remove it and check it no longer polices packets.
Type: test
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: I6f694c8a9804cadf010b5831770aaae81f42e027
|
|
Add a new API to apply a policer to an input interface.
Type: improvement
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: Ie8aff9120149b63d85363a9a5afdcaed60a93700
|
|
Add input per-interface policing as an input feature, repurposing
vnet_policer_inline which formermly allowed input policing to be
configured via a CLI.
Type: improvement
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: I2fd00e964ae358a05e507c844f5476372124fae1
|
|
This fixes an issue when initiator is expecting request with intitial
msgid being 0 but 1 is received instead which results in retransmission
(instead of normally processing the new request).
Type: fix
Change-Id: I60062276bd93de78128847c5b15f5d6cecf1df65
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie709d76438542783cbc8c6174b5e712ef18a6276
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Idf44f8d54c97fc43da5d5760e5ce477af07e5fbf
|
|
The policer test class overrides setup and teardown methods from
VppTestCase but doesn't do anything other than call the parent's
method.
Type: test
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: I76bac084c4cb5cb5195e34afe95b38affd585942
|
|
To add arbitrary text to the vlib log. Combines nicely with
comment/uncomment and the macro expander:
define MY_FEATURE uncomment # or comment
...
$(MY_FEATURE) { vpplog { My feature was enabled } }
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ia019f0a8fa670d8593ae01595f5ef410796e5b1c
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia37d8474224f6074826c9ffb82feb919b2ef52f7
|
|
Re-enable the test for 2-worker config test
Change-Id: Ie108c5d244c6704ffa152177ca77f6b6055fe38e
Type: test
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Keep coverity happy by checking the return value of unformat calls.
Type: test
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: Iccd0296da527d079f79cc7bd8b57af1b524299bd
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I8348645927519800d2390d27e01fae612602a6eb
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I3cd56690fe52402d4cfa9ea67f1de53d8d919dee
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I43283c59fd121dcb2486b26151108c90b027748b
|
|
Type: fix
If no host interface name is passed to the CLI command which creates
an interface pair, NULL gets passed to lcp_itf_pair_create() and a
seg fault occurs. Check whether a host interface name was provided
and fail gracefully if none was given.
Change-Id: I82886f4c2ee710e206c751c34a74399112e9062c
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I9a7bb617a3fa87d6ef49c75277e53425310cdcf9
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I30fde452fdeeb9877f3e3fecb0dd723f10f61019
|
|
Type: fix
Change-Id: Ia22b1189b82e885eb380f638ea6d05923a858f01
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I21368e37d70c5a64babd904bcf5f79339a5ab064
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I424c2f283dab99c1856eb8d9a1444486d09e8e29
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I92e03a5a3fcbdab6ce4d178193dceb4450ac0f62
|
|
See if this fixes the coverity issues.
Now at 324a6ac9a9b285ff7a5a3e5b2071e3624b94f2db
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I2cd281ebaeda69e214e6dc93a84888298741d0ee
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: refactor
Change-Id: I1fbabb743f20e21557c69bdaf97eda6f63584903
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I1914366c17fa05305d57d842793fad372319256a
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic28ee0e7cd313686b820e7003a47d17b844b8a89
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2a55a2fe0c483359c3b42ebe93cd0e8e279131d1
|
|
Type: refactor
This patch refactors the offload flags in vlib_buffer_t.
There are two main reasons behind this refactoring.
First, offload flags are insufficient to represent outer
and inner headers offloads. Second, room for these flags
in first cacheline of vlib_buffer_t is also limited.
This patch introduces a generic offload flag in first
cacheline. And detailed offload flags in 2nd cacheline
of the structure for performance optimization.
Change-Id: Icc363a142fb9208ec7113ab5bbfc8230181f6004
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|