aboutsummaryrefslogtreecommitdiffstats
path: root/src
AgeCommit message (Collapse)AuthorFilesLines
2018-10-23dns, dhcp: on-demand udp port registrationDave Barach5-16/+54
Change-Id: I8bf411adc6c5f4caa349d161174b544d2de3ad1d Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-23tcp: fast retransmit improvementsFlorin Coras5-107/+279
Patch is too large to be ported to 18.10 just days before release. - handle fast retransmits outside of established node and limit the retransmit burst size to avoid tx losses and worsening congestion. - in the absance of a tx pacer, use slow start after fast retransmit exists - add fast retransmit heuristic that re-retries sending the first segment if everything else fails - fine tuning Change-Id: I84a2ab8fbba8b97f1d2b26584dc11a1e2c33c8d2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-23vlib: alloc buffers on local numa, not on numa 1Damjan Marion1-1/+2
Change-Id: Icb8172238f735fd0825e474e16a006f1435e175c Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-23lisp: register cp port only if enabledFlorin Coras1-2/+0
Change-Id: I7030951215f0cf7d00c037892ac92d9c304cb5a1 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-23vlib: Add support for pci io read/writeMohsin Kazmi2-31/+108
Change-Id: I9d96e7782a12c2e19eacbb75edb1fb450cf33bed Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-10-23vlib: reduce default buffer memory size to be below RLIMIT_MEMLOCKDamjan Marion1-1/+5
Change-Id: If36be24fa08e21c7718a1dced506a7f254dfb5cf Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-23Numa-aware, growable physical memory allocator (pmalloc)Damjan Marion33-713/+1300
Change-Id: Ic4c46bc733afae8bf0d8146623ed15633928de30 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-23pg: udp length & checsum issueKingwel Xie1-4/+4
if udp length is specified, then use this length to calculate udp checksum otherwise, use length from vlib_buffer Change-Id: I5304a60d5d429993d0524b864b65ec503775412d Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
2018-10-23dpdk: support 18.11 changes to CRC flagsStephen Hemminger1-7/+7
In DPDK 18.11 the device flags for keeping/stripping CRC flags has changed. The old strip flag is gone, and replaced by a CRC keep flag. Change-Id: Iaa162854862a2a0855b418ee8029383fc116d3a2 Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-10-23dpdk: add esp6 decrypt nodes, func declarationsMatthew Smith1-0/+30
The function dpdk_ipsec_process() attempts to initialize some globals that store node indexes after looking up the node dpdk-esp6-decrypt. No such node was declared, so a segv occurs after dereferencing the result of the lookup. Add a node function that invokes dpdk_esp_decrypt_inline() with is_ip6 set to 1. Add a declaration of node dpdk-esp6-decrypt that uses the node function. Change-Id: I31ce23a458c2d4181bf40cbc2118c4ef3b9baf97 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-10-23c11 safe string handling supportDave Barach449-1577/+1858
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-23ipsec: fix wrong counter bumpKlement Sekera1-1/+1
Change-Id: I5105b688ef3df2c949ba09e1e90c1b8913502388 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-10-22vlib: pci improvementsDamjan Marion11-191/+252
- logging - pass vlib_main_t to all APIs - open vfio container only when needed Change-Id: I897e53e0af3f91c3a99f0c827401d1c0ec2e478a Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-22ipsec fix missing node renamesKlement Sekera4-8/+12
Change-Id: I70bc5af646894811d373456ec66aa83f2d75a477 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-10-22vlib: introduce vlib_buffer_get_{pa,va,current_va,current_pa} inlinesDamjan Marion10-75/+81
Change-Id: I0b42ac6b05bc9910904a97924ea4bebc84507d4d Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-22vppinfra: use log2 page size in hugepage functionsDamjan Marion4-20/+28
Change-Id: Ibec32c6df32f4cd9889d378e244f170c93ad295b Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-22Fix buffer overflow when fragmenting packets (VPP-1383)Juraj Sloboda1-2/+3
Change-Id: Idcda9ae55fa2efb0b2e928bac3e8e86ff8d19eba Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-10-22X86_64 perf counter pluginDave Barach12-26/+1627
Change-Id: Ie5a00c15ee9536cc61afab57f6cadc1aa1972f3c Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-22VPP-1420 CDP check memory bounds fixFilip Varga1-4/+17
Change-Id: I7951ffd050acb618dd20b86ae5946e1228ff5d79 Signed-off-by: Filip Varga <fivarga@cisco.com>
2018-10-22PAPI: Add support for format/unformat functions.Ole Troan5-12/+247
With the introduction of new types, like vl_api_address_t it is now possible to call a message using one of those functions with a string representation. E.g. for an IP address ip_add_address(address="1.1.1.1/24") The language wrapper will automatically convert the string into the vl_api_address_t representation. Currently the caller must do the reverse conversion from the returned named tuple with the unformat function. rv = get_address_on_interface(sw_if_index=1) print(VPPFormat.unformat(rv.address)) Change-Id: Ic872b4560b2f4836255bd5260289bfa38c75bc5d Signed-off-by: Ole Troan <ot@cisco.com>
2018-10-22Fix dereferencing null string in dpdk_early_initJuraj Sloboda2-0/+3
Change-Id: Iffba7ebe5af8fadc0251f3a10022739d45f394ce Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-10-22Fix stat_segment.c issue.Paul Vinciguerra1-5/+8
* using default socket name even when overridden in config. Change-Id: I1849bf5269629873afd1dd48d2df785a491781c3 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-10-22stats: Add wrapper for vec_freeOle Troan3-0/+8
The result vector from stat_segment_ls must be freed by the caller. Add wrapper for non-C language bindings. Change-Id: I7eee7f80ec98b41696d354add47b26978e12ef0f Signed-off-by: Ole Troan <ot@cisco.com>
2018-10-22ipsec: split ipsec nodes into ip4/ip6 nodesKlement Sekera15-390/+764
Change-Id: Ic6b27659f1fe9e8df39e80a0441305e4e952195a Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-10-22dpdk: use rte_vfio_dma_map API instead of digging for vfio fdDamjan Marion1-63/+17
This is new API introduced in DPDK 18.08. Change-Id: I66d49fe54a6abf2af621b597e8d4535e29cecec4 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-22lisp-gpe: register udp port only if enabled (VPP-1468)Florin Coras1-5/+7
Change-Id: I7d0930a19d927bbd7ba3fc879d5a0c8064827629 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-21tcp: count first lost hole (VPP-1465)Florin Coras2-17/+46
Change-Id: I3ac136e2a10796d8fa86ddb6f0d6cabe5fa749f8 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-20dpdk: add netvsc PMDStephen Hemminger3-1/+40
Teach DPDK plugin about the netvsc Poll Mode Driver. The speed of the Netvsc device matches the speed of the external port on the underlying vswitch. Therefore 1G, 10G, 25G, 56G and even 100G are possible. Change-Id: I14ab6907b7d8d350b63a083409d45fb9c348a364 Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-10-20acl-plugin: use the L2 feature arc infrastructure instead of L2 classifier ↵Andrew Yourtchenko3-699/+304
for plumbing This makes ACL plugin use the new feature arcs, which slightly increases performance. Since for ethertype whitelisting we were using the L2 classifier, to retain the functionality, make a simple node doing that, and plug it into non-ip L2 feature arc whenever needed. Change-Id: I3add377a6c790117dd3fd056e5615cb4c4438cf4 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-10-20pipes: fix the l2.l2_len and the l[23]_hdr_offset setting behavior of ↵Andrew Yourtchenko1-29/+30
pipe-rx node to match that of ethernet-input node Since pipe-rx is a sibling node of ethernet-input, it ought to perform similarly: set l2/l3 header offsets, and l2.l2_len value if the interface is in the l2 mode. The use cases of pipes do not assume the tagged traffic, so assume the simple ethernet header. Change-Id: I7c9b5f4f2b1402cfbd10513f76cdd59b2db7a7a6 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-10-20dpdk: use rx/tx_offload_names to formatStephen Hemminger1-38/+53
Rather than keeping our own list of offload capabalities, use the function in 18.08 or later to decode the value. Also, introduce a formatter to convert to lower case because DPDK API returns upper case names. Change-Id: I87546fa2bec67f8a8b44288f5994514114cb6faf Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2018-10-19avf: fix crash in rss key calculationDamjan Marion1-1/+1
Change-Id: Id13a0b6ed54885babf679f05207170e36709d9fa Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-19vppinfra: use memfd_create for hugepage mounts if supportedDamjan Marion2-25/+52
Starting with kernel 4.14 hugepage fd can be retrieved with memfd_systemcall Change-Id: I0f3bd6d0a7757ffe7b98e83763502013ac763ecb Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-19NAT44: fix ICMP virtual fragmentation reassembly (VPP-1466)Matus Fabian4-63/+122
Change-Id: I8006bca02948d9121f474a3d14f0576747bb3c51 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-10-19vppinfra: add atomic macros for __sync builtinsSirshak Das39-128/+160
This is first part of addition of atomic macros with only macros for __sync builtins. - Based on earlier patch by Damjan (https://gerrit.fd.io/r/#/c/10729/) Additionally - clib_atomic_release macro added and used in the absence of any memory barrier. - clib_atomic_bool_cmp_and_swap added Change-Id: Ie4e48c1e184a652018d1d0d87c4be80ddd180a3b Original-patch-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Sirshak Das <sirshak.das@arm.com> Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com> Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com> Reviewed-by: Steve Capper <steve.capper@arm.com>
2018-10-19Add pool_get_zero, pool_get_aligned_zero macrosDave Barach1-1/+13
Shorthand for the pattern: pool_get (<pool>, ep); memset (ep, 0, sizeof(*ep)); Should have done this years ago. Change-Id: Ideeb27a79ff4ca3e9a077c973b297671d1fa2d26 Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-18tcp: fix sacks lost bytes counting (VPP-1465)Florin Coras2-50/+118
Change-Id: Ie46b3a81de4ed39b7b40e3879436f7e5a2908d98 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-18tls: fix connection failures/interrupts at scale (VPP-1464)Florin Coras5-29/+45
Change-Id: I0bc4062c1fd3202ee201acb36a2bb14fc6ee1543 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-18tcp: fix cleanup of non established connections (VPP-1463)Florin Coras2-1/+5
- fix delete of connection in syn-received - fix delete of half-open connection Change-Id: I72ff4b60406a2762d998328c52f41adea40d2c1b Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-18Ping; remove unused arraysNeale Ranns1-3/+0
Change-Id: I104f2b4e0b1c354d3671962be3f6002f2721388d Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-18PAPI: Expose API enums to tests / applicationsOle Troan2-16/+43
e.g: from vpp_papi import VppEnum VppEnum.vl_api_address_family_t.ADDRESS_IP4 Change-Id: I10c22d57234a1a06e98a889cf80b19085b468ed3 Signed-off-by: Ole Troan <ot@cisco.com>
2018-10-17vxlan:decap caching error (VPP-1462)Eyal Bari1-1/+1
Change-Id: I3ef0725684bcb8ea526abe0ce62562b35a0070f5 Signed-off-by: Eyal Bari <ebari@cisco.com> (cherry picked from commit 0d87894bf279a4678cfca6cc438583090b166f85)
2018-10-17fix ip6 prefix check for tap_v2Michal Cmarada1-1/+1
Change-Id: Ifbb1393fc3c50c140c09e8baedcd4a92189ba56e Signed-off-by: Michal Cmarada <mcmarada@cisco.com>
2018-10-17IP Route add/del API is MP safeNeale Ranns1-0/+6
Change-Id: I0bfa4c9a3bb22155d7862cc13019cb172e77407c Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-17tcp: fix multiple fin retries (VPP-1461)Florin Coras2-10/+10
Change-Id: I1be7c59df7b48875f81ebeebf5f39ed15a43d2d8 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-17stats: vpp_get_stats missing last interface in dumpOle Troan1-2/+2
Change-Id: Ie1fa560cb255a9b13ddb4929da8f33286a8c137e Signed-off-by: Ole Troan <ot@cisco.com>
2018-10-17acl-plugin: tuplemerge: refresh the pointer to hash-readied ACL entries per ↵Andrew Yourtchenko1-0/+2
each collision in split_partition() (VPP-1458) A pointer to hash-ready ACL rules is only set once, which might cause a crash if there are colliding entries from more than one ACL applied. Solution: reload the pointer based on the element being processed. Change-Id: I7a701c2c3b4236d67293159f2a33c4f967168953 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> (cherry picked from commit 84112dd4f98e5a31a8c7340a741f89e77fd03363)
2018-10-17tcp: avoid sack processing when not needed (VPP-1460)Florin Coras3-4/+7
Change-Id: If81ee34e1f1e929de1a5b758ddb9aede4002e858 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-10-17bond: tx optimizationsDamjan Marion4-307/+342
Break up bond tx function into multiple small workloads: 1. parse the packet header and hash it based on the configured algorithm 2. optionally, trace the packet 3. convert the hash value from (1) to the slave port 4. update the buffers with the slave sw_if_index 5. Add the buffers to the queues 6. Create and send the frames old numbers ----------- Time 5.3, average vectors/node 223.74, last 128 main loops 40.00 per node 222.61 vector rates in 3.3627e6, out 6.6574e6, drop 3.3964e4, punt 0.0000e0 Name State Calls Vectors Suspends Clocks Vectors/Call BondEthernet0-output active 68998 17662979 0 1.89e1 255.99 BondEthernet0-tx active 68998 17662979 0 2.60e1 255.99 TenGigabitEthernet3/0/1-output active 68998 8797416 0 1.03e1 127.50 TenGigabitEthernet3/0/1-tx active 68998 8797416 0 7.85e1 127.50 TenGigabitEthernet7/0/1-output active 68996 8865563 0 1.02e1 128.49 TenGigabitEthernet7/0/1-tx active 68996 8865563 0 7.65e1 128.49 new numbers ----------- BondEthernet0-output active 304064 77840384 0 2.29e1 256.00 BondEthernet0-tx active 304064 77840384 0 2.47e1 256.00 TenGigabitEthernet3/0/1-output active 304064 38765525 0 1.03e1 127.49 TenGigabitEthernet3/0/1-tx active 304064 38765525 0 7.66e1 127.49 TenGigabitEthernet7/0/1-output active 304064 39074859 0 1.01e1 128.51 Change-Id: I3ef9a52bfe235559dae09d055c03c5612c08a0f7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-17VPP-1459:Ip4 lookup fail when exist prefix cover.mu.duojiao1-3/+1
Change-Id: I4ba0aeb65219596475345e42b8cd34019f5594c6 Signed-off-by: mu.duojiao <mu.duojiao@zte.com.cn>