aboutsummaryrefslogtreecommitdiffstats
path: root/src
AgeCommit message (Collapse)AuthorFilesLines
2023-11-14flowprobe: fix L3 header offset calculation for tx flowsAlexander Chernavin1-1/+1
The recent TX flows generation fix introduced "l3_hdr_offset" which represents the offset of the IP header in the buffer's data. The problem is that it is erroneously defined as a 16-bit unsigned integer. If the calculated offset is negative, "l3_hdr_offset" will get a value close to UINT16_MAX. And the code will search the IP header somewhere beyond the buffer's data. For example, this will occur in the case when an ICMP error is being sent in response to a received packet. With this fix, make "l3_hdr_offset" a signed integer. Type: fix Change-Id: I6f1283c7ba02656d0f592519b5863e68348c5583 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2023-11-14vppinfra: respect indent in format_tableDamjan Marion1-2/+3
Change-Id: Ib7e5cb5adfe81e5cc6243125d91f5179608a7733 Type: improvement Signed-off-by: Damjan Marion <damarion@cisco.com>
2023-11-14vppinfra: add unformat_{single,double}_quoted_string functionDamjan Marion2-0/+44
Change-Id: I8ee90be1b772074c1130b98c71b3be48c973b2e2 Type: improvement Signed-off-by: Damjan Marion <damarion@cisco.com>
2023-11-13ena: Amazon Elastic Network Adapter (ENA) native driverDamjan Marion20-1/+4434
Type: feature Change-Id: Icd9de05f2cbac0e5a6dfb1f1414f21dc4b893104 Signed-off-by: Damjan Marion <damarion@cisco.com>
2023-11-13dev: add change_max_rx_frame_size capabilityDamjan Marion9-30/+55
Type: improvement Change-Id: I922e216818b78f2fe7689c21a1d27d74a0ae28b8 Signed-off-by: Damjan Marion <damarion@cisco.com>
2023-11-12flowprobe: fix tx flows generated for rewritten trafficAlexander Chernavin1-5/+7
Currently, when IPFIX records generation is enabled for an interface in the TX direction, some rewritten traffic is being sent from that interface, and the Ethernet header's location has changed due to rewriting, generated TX flows will contain fields with wrong and zero values. For example, that can be observed when traffic is rewritten from a subinterface to a hardware interface (i.e. when tags are removed). A TX flow generated in this case will have wrong L2 fields because of an incorrectly located Ethernet header. And zero L3/L4 fields because the Ethernet type will match neither IP4 nor IP6. The same code is executed to generate flows for both input and output features. And the same mechanism is applied to identify the Ethernet header in the buffer's data. However, such general code usually works with the buffer's data conditionally based on the direction. For most input features, the buffer's current_data will likely point to the IP header. For most output features, the buffer's current_data will likely point to the Ethernet header. With this fix: - Keep relying on ethernet_buffer_get_header() to locate the Ethernet header for input features. And start using vlib_buffer_get_current() to locate the Ethernet header for output features. The function will account for the Ethernet header's position change in the buffer's data if there is rewriting. - After fixing Ethernet header determination in the buffer's data, L3/L4 fields will contain non-zero but still incorrect data. That is because IP header determination needs to be fixed too. It currently relies on the fact that the Ethernet header is always located at the beginning of the buffer's data and that l2_hdr_sz can be used as an IP header offset. However, this may not be the case after rewriting. So start calculating the actual offset of the IP header in the buffer's data. - Add a unit test to cover the case. Type: fix Change-Id: Icf3f9e6518912d06dff0d5aa48e103b3dc94edb7 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2023-11-10tls: fix forced ho cleanupFlorin Coras1-3/+13
Do not force cleanup of tcp half-open connection if tcp's cleanup notification to tls is pending. Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I7bccbe8429a4aab10df1c89b66138b967e04ac19
2023-11-10gtpu: support non-G-PDU packets and PDU SessionRune E. Jensen8-527/+2551
Updated the gtpu plugin code to support the PDU Session user plane protocol, required for 5G, as specified in 3GPP TS 38.415 version 17.0.0. This enables some initial support of 5G gNodeB's with the gtpu plugin. New features: - Basic support for the GTP-U Extension Header Flag. Packets with one extension can now be decapsulated. This enables basic support of the PDU Session user plane protocol (3GPP TS 38.415 version 17.0.0). New tunnels can be created with a PDU enable flag and a 6-bit QoS Flow Identifier (QFI). With this, encapsulated packets will have the PDU Session extension header, and the QFI set. - Ability to forward GTP-U packets that are not handled by the plugin directly. Only GTP-U packets with a message type of 255 (G-PDU) are handled directly. However, 3GPP TS 29.281 defines several other message types like echo and error indication. A new feature is added to optionally forward unknown or unsupported packets to a new IP address. This works separately for unknown GTP-U message types, unknown TEIDs, and packets with an unknown GTP-U header. This allows both echo and error indications from a 5G gNodeB to be handled by a different system outside VPP. - Simple way to get metrics for active tunnels and on tunnel close. In 5G session/tunnel lifetime is often short and created frequently. The normal API becomes too slow and inaccurate when too many tunnels are created and deleted every second. Improvements: - A clean ground structure to handle multiple message type in the future. The code path for G-PDU packets is optimized for performance, representing the typical case. Unsupported GTP-U packets enter a slow path that decodes the nature of the error. This presents a easy hook to handle other message types in the future. - Improved error reporting When using traces there is more details in the tunnel descriptions. - Updated the API with several enums. Fixes: - gtpu0->length field in IPv6 was computed with IPv4 header lengths in the encapsulation code. - vec_set_len (t->rewrite, ...) size was computed with the IPv4 header size also for IPv6 tunnels. Issues: - This PR does not enable full support of the 3GPP specification. In particular it only supports a single QoS/QFI flow for each tunnel. It ignores all incoming extension header flags. - API functions might change again when/if more support of the 3GPP TS 38.415 spec is added. Note that I have bumped the API version to 2.1.0 as it seems to be the correct approach based on my API changes. Type: feature Signed-off-by: Rune E. Jensen <runeerle@wgtwo.com> Change-Id: I91cd2b31f2561f1b3fb1e46c4c34a5a3c71b4625
2023-11-09iavf: interrupt mode supportDamjan Marion7-86/+241
Type: improvement Change-Id: Ie5fcaa706ab0995e0021cf1ee74b95c5a3b30283 Signed-off-by: Damjan Marion <damarion@cisco.com>
2023-11-09tls: fix handling of client and server init errorsFlorin Coras1-11/+9
- notify app on failed connect - avoid cleanup of ctx before transport cleanup to be able to handle pending rx notifications. Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I1b70ad45109d4c942afa1990dfce4fc44a50a637
2023-11-09ipsec: IPsec fix constant propagationMaxime Peim1-2/+3
In some anti-replay, some functions weren't using the boolean telling if the window was huge or not. Hence, limiting the constant propagation at compilation. Type: fix Change-Id: Ie5f2dda38339bb32113c6f7b2b82c82135fc92a8 Signed-off-by: Maxime Peim <mpeim@cisco.com>
2023-11-08tls: avoid reads after tcp transport removedFlorin Coras1-4/+18
Make sure underlying transport connection is not removed on rescheduled read event. Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I0137a2e43aa84d9442279e036c25771aeefd207f
2023-11-08dev: remove unused codeDamjan Marion3-37/+0
Change-Id: If380e4ab6ca30243137fd31fbe51845c0414721a Type: improvement Signed-off-by: Damjan Marion <damarion@cisco.com>
2023-11-08dev: interrupt mode supportDamjan Marion10-154/+306
Type: improvement Change-Id: I4a0578598182339bcf76e6b01da76b590a06f773 Signed-off-by: Damjan Marion <damarion@cisco.com>
2023-11-07af_packet: remove UNIX_FILE_EVENT_EDGE_TRIGGERED flagArtem Glazychev1-1/+0
af_packet does not process data until the interface is UP. If after interface creation, but before it is UP, the host interfaces are flooded, then blocking case may occur - VPP interface will never be able to process the data. If the EDGE_TRIGGERED flag is set, the event will not arrive, because nothing new is happening anymore (probably because the queue is already full). Therefore, we need to use LEVEL_TRIGGERED (default value), which indicates that there is still unprocessed data (accumulated after interface creation, but before it was UP). Type: fix Signed-off-by: Artem Glazychev <artem.glazychev@xored.com> Change-Id: Ied459fd194149d09f226bcb0a5907b3e327b148a
2023-11-07flowprobe: fix clearing interface state on feature disablingAlexander Chernavin1-0/+3
As a result of recent fixes, all currently stored flows of an interface are deleted when the feature is being disabled for the interface. This includes stopping the timer and freeing the flow entries for further reuse. The problem is that meta information is not cleared in the flow entries being deleted. For example, packet delta count will keep its value. The next flow that gets one of these pool entries will already have a non-zero packet count. So the counting of packets will start from a non-zero value. And incorrect packet delta count will be exported for that flow. With this fix, clear meta information too when clearing interface state. Also, update the corresponding test to cover this case. Type: fix Change-Id: I9a73b3958adfd1676e66b0ed50f1478920671cca Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2023-11-07build: disable bogus warnings for GCC 12Jieqiang Wang1-0/+8
The array bounds and string overread check on GCC 12 report a dozen of false positives that result in VPP build failures on ubuntu 22.04. Work around this build issue by unconditionally disabling these two warnings if C compiler is GCC 12 or newer version. Type: fix Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com> Change-Id: I999e847bb625ebdf3ef5f11b11598c553f306670
2023-11-07misc: silence -Wmaybe-uninitialized warningsJieqiang Wang4-4/+4
GCC 12 complains about such errors while the code itself looks good. Type: fix Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com> Change-Id: I021719fdbf7d9bd93a12eac76aeac8cbca13a810
2023-11-06vppinfra: fix ASAN issue in vec_foreach_pointer and pool_foreach_pointerDamjan Marion2-5/+6
Change-Id: If9381ae7283488b352a3c22f85732cd56ac6bfd9 Type: fix Fixes: 9937359, 91ff0e9 Signed-off-by: Damjan Marion <damarion@cisco.com>
2023-11-06ipsec: delete redundant codeDengfeng Liu1-4/+0
Type: fix Change-Id: I0de1c51455b0d3958c75ab5626a318ac656adbe7 Signed-off-by: Dengfeng Liu <liudf0716@gmail.com>
2023-11-06dpdk: correct the printing of Rx offloading flagsJieqiang Wang1-1/+1
DPDK added new Rx checksum flags[1] to handle cases like the virtual drivers. Current check of flags is not strict enough for flags like RTE_MBUF_F_RX_IP_CKSUM_NONE and will always be true no matter the checksum in packet is good or bad. Fix this issue by comparing the result of AND operation with the correspinding Rx checksum flags. Before this patch, packet trace prints the offload flags as below: Packet Offload Flags PKT_RX_IP_CKSUM_GOOD (0x0080) IP cksum of RX pkt. is valid PKT_RX_IP_CKSUM_NONE (0x0090) no IP cksum of RX pkt. PKT_RX_L4_CKSUM_GOOD (0x0100) L4 cksum of RX pkt. is valid PKT_RX_L4_CKSUM_NONE (0x0108) no L4 cksum of RX pkt. After this patch, packet offload flags would be like: Packet Offload Flags PKT_RX_IP_CKSUM_GOOD (0x0080) IP cksum of RX pkt. is valid PKT_RX_L4_CKSUM_GOOD (0x0100) L4 cksum of RX pkt. is valid Type: fix [1] https://github.com/DPDK/dpdk/commit/5842289a546ceb0072bd7faccb93821e21848e07 Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com> Change-Id: I3182022d9ccd46b2fc55bb3edfbfac9062ed7c89
2023-11-06pci: remove unnecessary ioctl() call and improve logging in vfio_set_irqsDamjan Marion3-34/+49
Type: improvement Change-Id: Ic8e2785bf375882defe5a1d299948d522cdd4895 Signed-off-by: Damjan Marion <damarion@cisco.com>
2023-11-06pci: fix VFIO set IRQ codeDamjan Marion1-2/+2
Type: fix Fixes: 599a16b Change-Id: I954e037ab944028798f9aa2a93f45322c8c7b4bb Signed-off-by: Damjan Marion <damarion@cisco.com>
2023-11-04bonding: add checks for sw_if_index in apiStanislav Zaikin1-0/+12
Type: fix Signed-off-by: Stanislav Zaikin <stanislav.zaikin@46labs.com> Change-Id: I16b48460b3fcd82bbb89c375402cb2455414d8bb
2023-11-03vppinfra: refactor interrupt codeDamjan Marion11-165/+127
Type: improvement Change-Id: Ie6987736faf7d8a641762e276775da8ee0c03ea4 Signed-off-by: Damjan Marion <damarion@cisco.com>
2023-11-03dev: strip debig log function name prefix during compilationDamjan Marion6-32/+14
Type: improvement Change-Id: I9b9bb37a0895366b412f042b0e2da5bbdd477325 Signed-off-by: Damjan Marion <damarion@cisco.com>
2023-11-02tcp: fix reset w pktFlorin Coras1-24/+3
Do not add ip header as that's added by tcp output and fix checksum. Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I9439acf5c66184af0350b1d4d7406b3feb2e79a1
2023-11-02iavf: new driver using new dev infraDamjan Marion16-4/+4582
Type: feature Change-Id: I9ae0dbf28b4571a37c568b587b771f90c06f200d Signed-off-by: Damjan Marion <damarion@cisco.com>
2023-11-02dev: new device driver infraDamjan Marion33-5/+5454
Type: feature Change-Id: I20c56e0d3103624407f18365c2bc1273dea5c199 Signed-off-by: Damjan Marion <damarion@cisco.com>
2023-11-01tcp: remove redundant ack checksFlorin Coras1-18/+0
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I4001f39afde8c33b60c15f74034bcce013fbbf70
2023-11-01tcp: allow ooo data in syn-rcvdFlorin Coras1-9/+0
As long as ack and segment are legitimate accept ooo data as we transition to established. Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I85cdc65d70cb8ae689a9ce9bbe4f86228b1ac533
2023-11-01tcp: postpone cleanup on connect failuresFlorin Coras1-2/+6
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I231b319d4d7aa3e17cc8cfe8aaa4762995a5b2c4
2023-10-31hsa: use common app session interface in echo testsFilip Tehlar4-86/+56
Type: test Change-Id: Ib320cfb5e20f12614c013a92ac15490f8ca3a7ce Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2023-10-31ipsec: separate UDP and UDP-encapsulated ESP packet processingvinay tripathi1-8/+33
This fix differentiates UDP and UDP-encapsulated ESP packets processing. While UDP-encapsulated ESP traffic is processed as IPsec traffic, UDP as other plain-text protocols is NOT dispatched against SPD policies. Key logic is taken from RFC 3948, and is based on the fact that the checksum of UDP packet encapsulating ESP packet must be zero. Type: fix Signed-off-by: vinay tripathi <vinayx.tripathi@intel.com> Change-Id: Ib1b4d240eea8e89f2daf17ec833905f26cdb31bd
2023-10-31ipsec: move udp/esp packet processing in the inline function ↵vinay tripathi1-174/+181
ipsec_esp_packet_process This inline function is introduced to simplify code readability and allows to splitting of UDP and ESP processing in the next step. Type: improvement Change-Id: Ida4d6abbed141ac74d4d285900777778eb8a5a1d Signed-off-by: Vinay Tripathi <vinayx.tripathi@intel.com>
2023-10-30hsa: preallocate sessions on server sideFilip Tehlar1-107/+110
Type: test Change-Id: Ib809f5a6c9e2f08d87f0070231df04d5f0040ca0 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2023-10-30vcl: propagate correctly EADDRINUSE for UDP bindMohammed Hawari1-2/+6
Change-Id: Ia8b5421cbaaf861ddb3ad7aeca53a077ff18864e Signed-off-by: Mohammed Hawari <mohammed@hawari.fr> Type: fix
2023-10-30ipsec: huge anti-replay window supportMaxime Peim13-178/+695
Type: improvement Since RFC4303 does not specify the anti-replay window size, VPP should support multiple window size. It is done through a clib_bitmap. Signed-off-by: Maxime Peim <mpeim@cisco.com> Change-Id: I3dfe30efd20018e345418bef298ec7cec19b1cfc
2023-10-30flowprobe: fix accumulation of tcp flags in flow entriesAlexander Chernavin1-0/+1
Currently, TCP flags of a flow entry don't get reset once the flow is exported (unlike other meta information about a flow - packet delta count and octet delta count). So TCP flags are accumulated as long as the flow is active. When the flow expires, it is exported the last time, and its pool entry is freed for further reuse. The next flow that gets this pool entry will already have non-zero TCP flags. If it's a TCP flow, the flags will keep being accumulated. This might look fine when exported. If it's a non-TCP flow, that will definitely look erroneous. With this fix, reset TCP flags once the flow is exported. Also, cover the reuse case with tests. Type: fix Change-Id: I5f8560afffcfe107909117d3d063e8a69793437e Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2023-10-27session: fix bind replies with errorsFlorin Coras1-1/+1
Type: fix Signed-off-by: Mohammed Hawari <mohammed@hawari.fr> Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Icdff3528fcaf863b400b9aca6c30d284bc17d5f0
2023-10-27hsa: fix coverity warningFilip Tehlar1-0/+5
Type: test Change-Id: Iba94edb7eb439ddc994d9a16cb52108373d052ce Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2023-10-26devices: remove unused codeDamjan Marion4-39/+0
Type: improvement Change-Id: I2427e1a93e89e9a7ac884b84352b96cf523ae11e Signed-off-by: Damjan Marion <damarion@cisco.com>
2023-10-26hsa: unify echo test setupFilip Tehlar10-544/+1026
Type: test Change-Id: I8665492c2f7755901a428aacdb27e98329ff557a Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2023-10-26build: allow for reproducible buildsAndrew Yourtchenko1-1/+16
Setting and using the SOURCE_DATE_EPOCH variable takes care of most of the magic necessary. https://reproducible-builds.org/docs/source-date-epoch/ vpp-ext-deps packages after this change is being built with that date set to date of the last modification of the subtree (similar logic to deriving the "number" for the package version) For the rest of the packages, pinning the following three variables should result in bit-identical artifacts across multiple runs: export SOURCE_DATE_EPOCH=$(date +%s) export VPP_BUILD_HOST="buildhost" export VPP_BUILD_USER="builduser" Add a blurb in the docs describing this new functionality. Type: improvement Change-Id: I71b085f0577b2358aa98f01dafd8e392239420a6 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2023-10-25lisp: fix missing symbol issueDamjan Marion2-3/+0
Type: fix Change-Id: I9373dabcdb2c4ba987e732b59e63b52603010873 Signed-off-by: Damjan Marion <damarion@cisco.com>
2023-10-25buffers: buffer name is vector, not c stringDamjan Marion1-6/+7
Type: fix Fixes: 8973b07 Change-Id: Iba6e29bab35be0148b469965c3af8391b5ab9140 Signed-off-by: Damjan Marion <damarion@cisco.com>
2023-10-25marvell: fix compilation issuesDamjan Marion3-9/+4
Type: fix Fixes: unknown Change-Id: I81ee03aaea2e1e6ffb9d6ee91db7fb9acd6debb7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2023-10-25fib: only update glean for interface if necessaryMatthew Smith2-8/+81
Type: improvement If an interface address is added, the glean adjacency for it's covering prefix is updated with that address. In the case of multiple addresses within the same prefix being added, the most recently added one will end up being used as the sender protocol address for ARP requests. Similar behavior occurs when an interface address is deleted. The glean adjacency is updated to some appropriate entry under it's covering prefix. If there were multiple interface addresses configured, we may update the address on the adjacency even though the address currently in use is not the one being deleted. Add a new value PROVIDES_GLEAN to fib_entry_src_flag_t. The flag identifies whether a source interface entry is being used as the address for the glean adjacency for the covering prefix. Update logic so that the glean is only updated on adding an interface address if there is not already a sibling entry in use which has the flag set. Also, only update the glean on deleting an interface address if the address being deleted has the flag set. Also update unit test which validates expected behavior in the case where multiple addresses within a prefix are configured on an interface. Signed-off-by: Matthew Smith <mgsmith@netgate.com> Change-Id: I7d918b8dd703735b20ec76e0a60af6d7e571b766
2023-10-24crypto: fix algo selectionDmitry Valter1-1/+4
Check if crypto ops vector is matching actual ops instead if blindly dereferencing it. Type: fix Signed-off-by: Dmitry Valter <d-valter@yandex-team.com> Change-Id: Ib88ab44137d9360ee96228e72349a62b2fa7a7e0
2023-10-18flowprobe: fix sending L4 fields in L2 template and flowsAlexander Chernavin2-3/+13
Currently, when L2 and L4 recording is enabled on the L2 datapath, the L2 template will contain L4 fields and L2 flows will be exported with those fields always set to zero. With this fix, when L4 recording is enabled, add L4 fields to templates other than the L2 template (i.e. to the IP4, IP6, L2_IP4, and L2_IP6 templates). And export L2 flows without L4 fields. Also, cover that case in the tests. Type: fix Change-Id: Id5ed8b99af5634fb9d5c6e695203344782fdac01 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>