Age | Commit message (Collapse) | Author | Files | Lines |
|
The sys/random.h header, which provides the getrandom syscall wrapper,
was only added in glibc2.25. To make it compatible with older version,
we can directly call the syscall.
Type: improvement
Signed-off-by: Guillaume Solignac <gsoligna@cisco.com>
Change-Id: I93c5f8a49c0323511a4e34273f0b3c0e24663bfd
|
|
GCC added asm inline in 8.3, so we change asm inline to asm volatile.
Type: fix
Fixes: d5045e68a782 ("vppinfra: introduce clib_perfmom")
Signed-off-by: Guillaume Solignac <gsoligna@cisco.com>
Change-Id: I9f7781ba9de66211404348ff477a17059b408a78
|
|
clang start to support parse asm inline from clang-11,
Use asm volatile instead.
Type: fix
Fixes: d5045e68a782 ("vppinfra: introduce clib_perfmom")
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: I00e5e19856caaed94e22f8fa6cf4f918483976a4
|
|
Type: improvement
Change-Id: I37c187af80c21b8fb1ab15af112527a837e0df9e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
After changes made in f840880, VRRP IPv6 cannot reply for neighbor
solicitations requesting the link layer address of the configured
virtual address.
VRRP IPv6 enables the vrrp6-nd-input feature in the ip6-local feature
arc for an interface on which a virtual router is configured. When
neighbor solicitations arrive on that interface, ip6-local should start
feature arc walk for that interface and the messages should be processed
by vrrp6-nd-input. The problem is that currently, the feature arc is
started for the interface obtained from the receive DPO that has
interface unset (i.e. max u32) for local mfib entries. Thus, the feature
arc is started not on the interface the messages were received on and
vrrp6-nd-input is not traversed.
With this fix, if interface obtained from the receive DPO is unset, use
RX interface from the buffer to start the ip46-local feature arc.
Also, enable tests of this case for both IPv4 and IPv6 address families
that are currently tagged as extended and not run on every change. They
configure VRRP with priority 255 and are expected to be stable.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I11ef3d5a7a986e04431e8613d1510b8666094bd7
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I9cf21ee7ad363dd1af5ca75f07bfe38d8fe749f9
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I45c63e0a7d7179a0f27ca3f093bd3cf7458a12d3
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie1ae401d5105aa42761d3cac5dfbe523f3995c87
|
|
In test_bihash_threads, if a test thread fails to be created,
it is still counted towards the total thread count, which could
lead to never-ending test loop. This patch fixes the issue.
Type: fix
Signed-off-by: Jing Peng <pj.hades@gmail.com>
Change-Id: Ic0f1d4dde9c5ea672b52f0e2e49f16d42f982b77
|
|
Use the specified nexthop table id instead of the interface table id.
Type: fix
Change-Id: I61bf61d50d2716fcd9a6e35df4d60222dc4f36d5
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I9f3d1a8574b15f09a458baad98c815e087fd60b8
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I805131b4e3d0cb2fab1d3bf76db659c67522c2e8
|
|
This patch fixes test_bihash_unittest in two ways:
1. The number of searches, namely tm->search_iter, defaults to 0,
thus disabling the test. This patch changes the default to 1.
2. Test errors are reported by clib_warning() instead of being
returned, thus the caller test/test_bihash.py is never aware of them.
This patch returns the errors constructed by clib_error_return().
Type: fix
Signed-off-by: Jing Peng <pj.hades@gmail.com>
Change-Id: I60e99a829ebe6aa2a56e7a9332cf973afa100311
|
|
Type: refactor
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I9e68ecb91f6433f68a8a87dd066f3e369f25a3c9
|
|
clang-14 is default for Upcoming Ubuntu 22.04 LTS...
Type: make
Change-Id: I65328d0e90a4c13d5766e51da8b90a8899b773d9
Signed-off-by: Damjan Marion <dmarion@me.com>
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I12b2e53ddb797cc809a2d742d17a1a60edde385d
|
|
Type: fix
Fixes: 616447c39231
In lcp_router_link_mtu(), either vnet_hw_interface_set_mtu() or
vnet_sw_interface_set_mtu() is called, based on whether this appears to
be a physical interface. The test to determine whether this is true was
incorrect and probably never worked right so vnet_sw_interface_set_mtu()
was always being called. This causes some breakage with Recent changes
to code which manages interface MTUs. Fix the test so the right function
is called.
Change-Id: I1ecccbce37d5a1e53b2349ed40f3d0d27eb03569
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I9f061a05d947bc2867e1b962bf0522ad344bcc1a
|
|
Do not access allocated elements beyond the end of the vector. They are
allocated, but not yet valid both logically (they are at best NULLs) and
according to ASAN.
Type: fix
Change-Id: Iaf43767d6d3bd4c24c7c5a0ba9b3410bbeeb0556
Signed-off-by: Dmitry Valter <d-valter@yandex-team.ru>
|
|
Type: improvement
Change-Id: I85a90774eb313020435c9bc2297c1bdf23d52efc
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
The clib interrupt structure has a couple of fields at the start of
the cacheline, and then in the next cacheline it has a bitmap, which
is then followed by an atomic bitmap. The size of the bitmaps is
based on the number of interrupts, and when the memory is allocated
the number of interrupts needed is used to size the overall block of
memory. The interrupts typically map to pool entries, so if we want
to store 512 entries then we store them in indices 0..511. This
would then take 8 6 4bit words, so each bitmap would be this size
when the struct is allocated.
It is possible to walk over the end of the allocated data with certain
sizes, one of which is 512. The reason this happens with 512 is that
the check to see when to exit the loop is returning when offset is
greater than the value needed to fit all the values. In this case
512 >> 6 = 8. If there had only been 511 entries then the size would
have been 511 >> 6 = 7, and so it would have fitted in the space.
Therefore modify the check to also check that we are not looking into
the memory beyond what we have allocated in the case where the
number of interrupt is one of the boundary values like 512.
Also add a similar check first time round the loop as it is
possible we could have ate same problem there too.
Add a new test file to verify the new code works. The old version
of the code made this test fail when run with the address
sanitizer. Without the sanitiser it tended to pass because the
following memory was typically set to 0 even though it was
uninitialised.
Type: fix
Signed-off-by: Paul Atkins <patkins@graphiant.com>
Change-Id: I2ec4afae43d296a5c30299bd7694c072ca76b9a4
|
|
Type: improvement
Change-Id: I21de21af6dea9e39df5e912e20e56d878a40659f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Short message lengths are correctly handled by the code, asserting makes unit tests that verify this behaviour (e.g. test_ip_punt_api_validation) fail/crash with a debug image.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ib3a377e5d49fde0eee252b92f0e58a8a0d0d83ec
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia4d8aaafeb3629f421601edffefe9c61c3e69dba
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I68ada775810bb4a4f280962a979605b211562a52
|
|
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I33a29cf11998736347eca5016eee112619d847c1
|
|
Type: improvement
Change-Id: Iab3d65b6276829ad1e522e66380d1797e37579b8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ie5f2bdb8fb559680bab863a7c24a49360e005b58
|
|
Type: improvement
Change-Id: Ie4cdc6d8906da3d1cd18a8f1d7076283546d3003
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: I2562ae5833b542c29bcd5025a9a6756e5de95a42
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I1bca733d2a35733275efa46ee0a23bf572365c74
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: If4a7ac244832ef72d82c71b0277bc110b9500537
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
|
|
An unexpected packet that shows up on a Wireguard interace
that happens not to have a forwarding peer will cause a
segfault trying to index the vector of peers by adjacency.
Rather than segfaulting, recognize a non-adjacent packet
and drop it instead.
This leaves open the question of what _should_ be
happening to, say, IPv6 multicast packets.
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Type: fix
Fixes: edca1325cf296bd0f5ff422fc12de2ce7a7bad88
Change-Id: Ic0a29e6cf6fe812a4895ec11bedcca86c62e590b
|
|
New dpdk version deprecates some macros used by VPP.
This patch changes them to 22.03 version.
Type: improvement
Signed-off-by: Dastin Wilski <dastin.wilski@gmail.com>
Change-Id: Ic362ed318dc1ad88bb682ef13fbd6159171fbaef
|
|
New version of dpdk changes some macros names.
This patch ensures VPP will be compatible with older dpdk versions.
Type: improvement
Signed-off-by: Dastin Wilski <dastin.wilski@gmail.com>
Change-Id: I3d9736278e70064610a1dcad5f2d2f6eb26e0d4b
|
|
Type: fix
Change-Id: I70f9ec2eb6c9c1494a4ecd56e06898f6162a0e0e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Two similar CLI paths "nat44" and "nat44 add interface address"
caused unexpected behavior. If "nat44 add interface address"
command would fail the vlib cli processing function would
call "nat44" handler. This would also clean any previously
set errors from the first command and basically return
same error returned by "nat44" handler for every failed
command that starts with the same path string.
Fixes nat44-ed and nat44-ei plugin.
Change-Id: I1aac85c8ae2932da582a2b78243521d1bf8a0653
Ticket: VPP-2021
Type: fix
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: refactor
Change-Id: I5ca142ec1557d5b5c3806b43553ad9d3b5ea1112
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I609fb28e58286ff490d12384b03dd713830379b3
|
|
Type: refactor
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Id485f525057163582dc7a83f7dab7a8b2e759270
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: If7d9c94dcdc32fa66763e18bd3be7d28b2d17946
|
|
Type: improvement
Change-Id: I84d594d8baaf18056580455f3b2790d0f31b7b0f
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
This commit only update is_equal flavours to use
_mm512_cmpneq_epi64_mask() but clang-format decided to also reformat the
whole block.
Type: improvement
Change-Id: I530cf91e8bceaf15022556f803b27de4f8583217
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ie647fb280831af23925c4b5f659f1dade6d37eff
|
|
Use of _vec_len() to set vector length breaks address sanitizer.
Users should use vec_set_len(), vec_inc_len(), vec_dec_len () instead.
Type: improvement
Change-Id: I441ae948771eb21c23a61f3ff9163bdad74a2cb8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5bd0b300af07424d1ce4807fa0b17e375001f089
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I8ba93643236aaa50eeb4755b74821a8c4ca6179b
|
|
vl_api_sw_interface_tx_placement_get_t_handler is autoendian.
So (contrary to most other uses) the context is in native order there.
Thus, send_interface_tx_placement_details needs to convert back
before using REPLY_MACRO_DETAILS5 macro.
Type: fix
Fixes: 0d05c0d214ffd326e531bea58f3c971bb9a58252
Change-Id: I00a3734cafa66d7d76c7edaea526a1eae0448ad9
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7287e40ad95dfe061fd8a7b0e99921d5540e030d
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5d4e68730a75337a2e532e72f366b62d6973235e
|