Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: test
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Iabc8f2b09ee10a82aacebd36acfe8648cf69b7d7
|
|
Make the ipsec[46]-tun-input nodes siblings of device-input so that
input features can be enabled on them. Register ipsec-tun for feature
updates. When a feature is enabled on the device-input arc and the
ifindex is an IPSec tunnel, change the end node of the arc for that
ifindex to be the appropriate ESP decrypt node. Set a flag on the
tunnel to indicate that the feature arc should be started for packets
input on the tunnel.
Test input policing on ESP IPSec tunnels.
Type: improvement
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: I3b9f047e5e737f3ea4c58fc82cd3c15700b6f9f7
|
|
support
Type: feature
attmpet 2. this includes changes in ah_encrypt that don't use
uninitialised memory when doing tunnel mode fixups.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ie3cb776f5c415c93b8a5ee22f22586fd0181110d
|
|
This reverts commit c7eaa711f3e25580687df0618e9ca80d3dc85e5f.
Reason for revert: The jenkins job named 'vpp-merge-master-ubuntu1804-x86_64' had 2 IPv6 AH tests fail after the change was merged. Those 2 tests also failed the next time that job ran after an unrelated change was merged.
Change-Id: I0e2c3ee895114029066c82624e79807af575b6c0
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
support
Type: feature
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I6d4a9b187daa725d4b2cbb66e11616802d44d2d3
|
|
Type: feature
Change-Id: I9f7742cb12ce30592b0b022c314b71c81fa7223a
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
it's been 2 releases since it was marked deprecated.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I0eba7ed607826ed0d00e7d2d8f9b27d09e8e9a6e
|
|
Type: refactor
Change-Id: I9096e3b473110350e1e8e5936e3c4c164f8969a7
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: feature
- use tunnel_encap_decap_flags to control the copying of DSCP/ECN/etc
during IPSEC tunnel mode encap.
- use DSCP value to have fixed encap value.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: If4f51fd4c1dcbb0422aac9bd078e5c14af5bf11f
|
|
Not all ESP crypto algorithms require padding/alignment to be the same
as AES block/IV size. CCM, CTR and GCM all have no padding/alignment
requirements, and the RFCs indicate that no padding (beyond ESPs 4 octet
alignment requirement) should be used unless TFC (traffic flow
confidentiality) has been requested.
CTR: https://tools.ietf.org/html/rfc3686#section-3.2
GCM: https://tools.ietf.org/html/rfc4106#section-3.2
CCM: https://tools.ietf.org/html/rfc4309#section-3.2
- VPP is incorrectly using the IV/AES block size to pad CTR and GCM.
These modes do not require padding (beyond ESPs 4 octet requirement), as
a result packets will have unnecessary padding, which will waste
bandwidth at least and possibly fail certain network configurations that
have finely tuned MTU configurations at worst.
Fix this as well as changing the field names from ".*block_size" to
".*block_align" to better represent their actual (and only) use. Rename
"block_sz" in esp_encrypt to "esp_align" and set it correctly as well.
test: ipsec: Add unit-test to test for RFC correct padding/alignment
test: patch scapy to not incorrectly pad ccm, ctr, gcm modes as well
- Scapy is also incorrectly using the AES block size of 16 to pad CCM,
CTR, and GCM cipher modes. A bug report has been opened with the
and acknowledged with the upstream scapy project as well:
https://github.com/secdev/scapy/issues/2322
Ticket: VPP-1928
Type: fix
Signed-off-by: Christian Hopps <chopps@labn.net>
Change-Id: Iaa4d6a325a2e99fdcb2c375a3395bcfe7947770e
|
|
Type: feature
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ie8bd50df163aea2798e9f9d35a13dcadc4a4a4b2
|
|
Fix of the top 11 python issues flagged as BLOCKER.
Ticket: VPP-1856
Type: fix
Change-Id: Icf4691e62f4a69d6ee196b6d6e2ab52d961b5c76
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: feature
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Iaba2ab11bfaa1c8db4023434e3043ac39500f938
|
|
Type: feature
Change-Id: Ie072a7c2bbb1e4a77f7001754f01897efd30fc53
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: test
Change-Id: I97e02ebc5989eee794511c1ed6049e300be7d64e
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Change-Id: I63d4df68eed6589763b5ce62bcd7f3fd867c60e1
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
1 - big packets; chained buffers and those without enoguh space to add
ESP header
2 - IPv6 extension headers in packets that are encrypted/decrypted
3 - Interface protection with SAs that have null algorithms
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ie330861fb06a9b248d9dcd5c730e21326ac8e973
|
|
Type: fix
Change-Id: I5cb9a3845ddbc5f4de4eb4e9c481f606fe5cec9a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I7e041b666dabd90df23a920a1f1d99db4c10ddfe
Signed-off-by: snaramre <snaramre@cisco.com>
|
|
APIs for dedicated IPSec tunnels will remain in this release and are
used to programme the IPIP tunnel protect. APIs will be removed in a
future release.
see:
https://wiki.fd.io/view/VPP/IPSec
Type: feature
Change-Id: I0f01f597946fdd15dfa5cae3643104d5a9c83089
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Id13da9371c71c10c12a0120ec89ba21c1ca47524
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I3255702e7c562c8d04a91a095e245756c6443a9e
|
|
Type: fix
Ticket: VPP-1756
the block-size was set to 0 resulting in incorrect placement of the ESP
footer.
add tests for NULL encrypt + integ.
Change-Id: I8ab3afda8e68f9ff649540cba3f2cac68f12bbba
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I1fa8c5326d6f22cfb8dd40e97d8a22d11a716922
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I01eeedf8d5015b07b9422c65afe78bfe8177c22c
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Several Fixes:
1 - Anti-replay did not work with GCM becuase it overwrote the sequence
number in the ESP header. To fix i added the seq num to the per-packet
data so it is preserved
2 - The high sequence number was not byte swapped during ESP encrypt.
3 - openssl engine was the only one to return FAIL_DECRYPT for bad GCM
the others return BAD_HMAC. removed the former
4 - improved tracing to show the low and high seq numbers
5 - documented the anti-replay window checks
6 - fixed scapy patch for ESN support for GCM
7 - tests for anti-reply (w/ and w/o ESN) for each crypto algo
Change-Id: Id65d96b6d1d4dd821b2ab557e87468fff6d70e5b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Change-Id: I87cc1168466f267e8c4bbec318401982f4bdf03a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
please consult the new tunnel proposal at:
https://wiki.fd.io/view/VPP/IPSec
Type: feature
Change-Id: I52857fc92ae068b85f59be08bdbea1bd5932e291
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ic6e6ac0629bbf07f7dad1803a85aabfdccbc2035
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
The current code only allowed access to the main thread error counters.
That is not so useful for a multi worker instance.
No return a vector indexed by thread of counter_t values.
Type: fix
Change-Id: Ie322c8889c0c8175e1116e71de04a2cf453b9ed7
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
* Configure tests to raise exception if cli_inband fails.
* Fix failing tests.
* Add filename detail to pcap.stat clib_error_return for debugging.
Note: this change identifies spurious issues with packet-generator such as:
CliFailedCommandError: packet-generator capture: pcap file
'/tmp/vpp-unittest-Test6RD-v09RPA/pg0_out.pcap' does not exist.
These issues resolve themselves on remaining test passes.
Change-Id: Iecbd09daee954d892306d11baff3864a43c5b603
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: Id7fcaf8590f9f2dcccdebea0ad31c7ecd1cbc8af
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ia3474e5bfea5764eae9b2987bf78296535df6778
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I8977100d7a22b50260858bd1ea9db419b53284ff
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ia8cea13f7b937294e6a080a55fb2ceff30063acf
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Id2ddb77b4ec3dd543d6e638bc882923f2bac011d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This change adds a consistent interface for adding test-specific show commands to
log.txt.
It also adds log markers for the execution of setUp[Class], tearDown[Class]
in the logs.
Change-Id: I7d42e396e594a59e866a7d55dac0af25548e657a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I81b3888816b064bd6bf0f38f5380dae93d7bb349
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
refactor the IPSEC tests a bit so we can parameterise
the setup.
Change-Id: I777e5eb8f29ca1dce3dd273ebd05dae5846790af
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Continuation/Part 2 of https://gerrit.fd.io/r/#/c/17092/
Change-Id: Id0122d84eaf2c05d29e5be63a594d5e528ee7c9a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I925aa5bf9472e81f98072d63df499b19e6ddf43d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
failing test disabled on ARM
Change-Id: I6b7535cd8f51fdaf9786ba77f9f61a7d8d049bbd
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I63741a22bc82f5f861e1c0f26a93b5569cc52061
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ib828ea5106f3ae280e4ce233f2462dee363580b7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I4d3ba18ab5205317219989de55b6e50d3b1d8a79
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: Iad6c4b867961ec8036110a4e15a829ddb93193ed
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Id546c56a4904d13d4278055f3c5a5e4548e2efd0
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I46f1db6579835c6613fdbb2b726246cc62b135fe
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I6a76907dc7bed2a81282b63669bea2219d6903c9
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|