summaryrefslogtreecommitdiffstats
path: root/test/test_bfd.py
AgeCommit message (Collapse)AuthorFilesLines
2019-12-02tests: BFD python3 changessnaramre1-40/+5
Type: fix Change-Id: Ie441e81fe3971d70f96196c79d74658f910b4875 Signed-off-by: snaramre <snaramre@cisco.com>
2019-11-08tests: python3 use byte strings in raw()Ole Troan1-3/+3
Raw('\xaf) and Raw(b'\xaf) are two quite different things in python 2 versus 3. In most cases this didn't make a difference, apart from those cases where length of payload actually mattered. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I3cba5c1486e436a3ca8aa10a7b393da75aa9f6b9
2019-11-05misc: Fix python scripts shebang lineRenato Botelho do Couto1-1/+1
Type: fix Since CentOS 8, RPM build script doesn't accept '#!/usr/bin/env python' as a valid shebang line. It requires scripts to explicitly chose between python2 or python3. Change all to use python3 as suggested by Paul Vinciguerra. Depends-On: https://gerrit.fd.io/r/23170 Signed-off-by: Renato Botelho do Couto <renato@netgate.com> Change-Id: Ie72af9f60fd0609e07f05b70f8d96e738b2754d1
2019-09-04bfd: API cleanupJakub Grajciar1-33/+39
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I4b91ebe8aadbec8b95716ed1cde4b0a13eee3a3f Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-06-18fib: fib api updatesNeale Ranns1-6/+2
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-07bfd: UT for BFD session over GRE tunnelNeale Ranns1-13/+107
Signed-off-by: Neale Ranns <nranns@cisco.com> Adding UT for BFD over GRE tunnel. Ticket: none Type: test Change-Id: I03eca4a0c7114cdc16fde9be4cd6db6216b8c845 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-11VPP-1508: Use scapy.compat to manage packet level library differences.Paul Vinciguerra1-13/+16
Change-Id: Icdf6abc9e53d33b26fd1d531c7dda6be0bb9cb55 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-11Tests: fix time.sleep(0) # yield. Reduce sleep related log messages.Paul Vinciguerra1-2/+2
Reduce the incidence of: 20:04:23,606 unexpected time.sleep() result - slept for 2.187967e-03s instead of ~6.837845e-04s! Change-Id: Ic576fda7f75e571c9019111588a6a936ee2cf5c2 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-02-04VTL Cleanup: Fix missing calls to setUpClass/tearDownClass, fix numerous ↵Paul Vinciguerra1-1/+32
TypeErrors. * TypeError: assertIsNotNone() got an unexpected keyword argument 'msg' * Correct missing calls to setUpClass/tearDownClass. If you want the setUpClass and tearDownClass on base classes called then you must call up to them yourself. The implementations in TestCase are empty. https://docs.python.org/2/library/unittest.html#setupclass-and-teardownclass Cleans up issues in parallel test mode: ------------- FAILURES AND ERRORS IN TESTS: Testcase name: VCL Thru Host Stack Bidir Nsock FAILURE: test_vcl.VCLThruHostStackBidirNsock.test_vcl_thru_host_stack_bi_dir_nsock [test_vcl.VCLThruHostStackBidirNsock.test_vcl_thru_host_stack_bi_dir_nsock] Testcase name: Bidirectional Forwarding Detection (BFD) (changing auth) ERROR: test_bfd.BFDAuthOnOffTestCase.test_auth_change_key_delayed [test_bfd.BFDAuthOnOffTestCase.test_auth_change_key_delayed] ERROR: test_bfd.BFDAuthOnOffTestCase.test_auth_change_key_immediate [test_bfd.BFDAuthOnOffTestCase.test_auth_change_key_immediate] ERROR: test_bfd.BFDAuthOnOffTestCase.test_auth_off_delayed [test_bfd.BFDAuthOnOffTestCase.test_auth_off_delayed] ERROR: test_bfd.BFDAuthOnOffTestCase.test_auth_off_immediate [test_bfd.BFDAuthOnOffTestCase.test_auth_off_immediate] ERROR: test_bfd.BFDAuthOnOffTestCase.test_auth_on_delayed [test_bfd.BFDAuthOnOffTestCase.test_auth_on_delayed] ERROR: test_bfd.BFDAuthOnOffTestCase.test_auth_on_immediate [test_bfd.BFDAuthOnOffTestCase.test_auth_on_immediate] Testcase name: Punt Socket for IPv4 ERROR: test_punt.TestIP4PuntSocket.test_punt_socket_dump [test_punt.TestIP4PuntSocket.test_punt_socket_dump] ERROR: test_punt.TestIP4PuntSocket.test_punt_socket_traffic_multi_port_multi_sockets [test_punt.TestIP4PuntSocket.test_punt_socket_traffic_multi_port_multi_sockets] ERROR: test_punt.TestIP4PuntSocket.test_punt_socket_traffic_multi_ports_single_socket [test_punt.TestIP4PuntSocket.test_punt_socket_traffic_multi_ports_single_socket] ERROR: test_punt.TestIP4PuntSocket.test_punt_socket_traffic_single_port_single_socket [test_punt.TestIP4PuntSocket.test_punt_socket_traffic_single_port_single_socket] Testcase name: Bidirectional Forwarding Detection (BFD) (IPv6) ERROR: test_bfd.BFD6TestCase.test_echo [test_bfd.BFD6TestCase.test_echo] ERROR: test_bfd.BFD6TestCase.test_echo_looped_back [test_bfd.BFD6TestCase.test_echo_looped_back] ERROR: test_bfd.BFD6TestCase.test_intf_deleted [test_bfd.BFD6TestCase.test_intf_deleted] ERROR: test_bfd.BFD6TestCase.test_session_up [test_bfd.BFD6TestCase.test_session_up] ERROR: test_bfd.BFD6TestCase.test_session_up_by_ip [test_bfd.BFD6TestCase.test_session_up_by_ip] Testcase name: Bidirectional Forwarding Detection (BFD) (CLI) ERROR: test_bfd.BFDCLITestCase.test_add_mod_del_bfd_udp [test_bfd.BFDCLITestCase.test_add_mod_del_bfd_udp] ERROR: test_bfd.BFDCLITestCase.test_add_mod_del_bfd_udp6 [test_bfd.BFDCLITestCase.test_add_mod_del_bfd_udp6] ERROR: test_bfd.BFDCLITestCase.test_add_mod_del_bfd_udp6_auth [test_bfd.BFDCLITestCase.test_add_mod_del_bfd_udp6_auth] ERROR: test_bfd.BFDCLITestCase.test_add_mod_del_bfd_udp_auth [test_bfd.BFDCLITestCase.test_add_mod_del_bfd_udp_auth] ERROR: test_bfd.BFDCLITestCase.test_admin_up_down [test_bfd.BFDCLITestCase.test_admin_up_down] ERROR: test_bfd.BFDCLITestCase.test_auth_on_off [test_bfd.BFDCLITestCase.test_auth_on_off] ERROR: test_bfd.BFDCLITestCase.test_auth_on_off_delayed [test_bfd.BFDCLITestCase.test_auth_on_off_delayed] ERROR: test_bfd.BFDCLITestCase.test_set_del_meticulous_sha1_key [test_bfd.BFDCLITestCase.test_set_del_meticulous_sha1_key] ERROR: test_bfd.BFDCLITestCase.test_set_del_sha1_key [test_bfd.BFDCLITestCase.test_set_del_sha1_key] ERROR: test_bfd.BFDCLITestCase.test_set_del_udp_echo_source [test_bfd.BFDCLITestCase.test_set_del_udp_echo_source] ERROR: test_bfd.BFDCLITestCase.test_show [test_bfd.BFDCLITestCase.test_show] Testcase name: VAPI test ERROR: test_vapi.VAPITestCase.test_vapi_c [test_vapi.VAPITestCase.test_vapi_c] Testcase name: Container integration extended testcases ERROR: test_container.ContainerIntegrationTestCase.test_0010_basic_conn_test [test_container.ContainerIntegrationTestCase.test_0010_basic_conn_test] ERROR: test_container.ContainerIntegrationTestCase.test_0011_basic_conn_test [test_container.ContainerIntegrationTestCase.test_0011_basic_conn_test] ERROR: test_container.ContainerIntegrationTestCase.test_0050_loopback_prepare_test [test_container.ContainerIntegrationTestCase.test_0050_loopback_prepare_test] ERROR: test_container.ContainerIntegrationTestCase.test_0110_basic_conn_test [test_container.ContainerIntegrationTestCase.test_0110_basic_conn_test] ERROR: test_container.ContainerIntegrationTestCase.test_0111_basic_conn_test [test_container.ContainerIntegrationTestCase.test_0111_basic_conn_test] ERROR: test_container.ContainerIntegrationTestCase.test_0200_basic_conn_test [test_container.ContainerIntegrationTestCase.test_0200_basic_conn_test] ERROR: test_container.ContainerIntegrationTestCase.test_0210_basic_conn_test [test_container.ContainerIntegrationTestCase.test_0210_basic_conn_test] ERROR: test_container.ContainerIntegrationTestCase.test_0211_basic_conn_test [test_container.ContainerIntegrationTestCase.test_0211_basic_conn_test] ERROR: test_container.ContainerIntegrationTestCase.test_0300_unconfigure_commands [test_container.ContainerIntegrationTestCase.test_0300_unconfigure_commands] ERROR: test_container.ContainerIntegrationTestCase.test_0410_spoof_test [test_container.ContainerIntegrationTestCase.test_0410_spoof_test] ERROR: test_container.ContainerIntegrationTestCase.test_0411_spoof_test [test_container.ContainerIntegrationTestCase.test_0411_spoof_test] Testcase name: Re-enable IPFIX ERROR: test_flowprobe.ReenableIPFIX.test_0011 [test_flowprobe.ReenableIPFIX.test_0011] Testcase name: VXLAN over IPv6 Test Case ERROR: setUpClass [setUpClass (test_vxlan6.TestVxlan6)] Testcase name: JVPP Core Test Case ERROR: test_jvpp.TestJVpp.test_vpp_acl_callback_api [test_jvpp.TestJVpp.test_vpp_acl_callback_api] ERROR: test_jvpp.TestJVpp.test_vpp_acl_future_api [test_jvpp.TestJVpp.test_vpp_acl_future_api] ERROR: test_jvpp.TestJVpp.test_vpp_core_callback_api [test_jvpp.TestJVpp.test_vpp_core_callback_api] ERROR: test_jvpp.TestJVpp.test_vpp_core_future_api [test_jvpp.TestJVpp.test_vpp_core_future_api] ERROR: test_jvpp.TestJVpp.test_vpp_ioamexport_callback_api [test_jvpp.TestJVpp.test_vpp_ioamexport_callback_api] ERROR: test_jvpp.TestJVpp.test_vpp_ioamexport_future_api [test_jvpp.TestJVpp.test_vpp_ioamexport_future_api] ERROR: test_jvpp.TestJVpp.test_vpp_ioampot_callback_api [test_jvpp.TestJVpp.test_vpp_ioampot_callback_api] ERROR: test_jvpp.TestJVpp.test_vpp_ioampot_future_api [test_jvpp.TestJVpp.test_vpp_ioampot_future_api] ERROR: test_jvpp.TestJVpp.test_vpp_ioamtrace_callback_api [test_jvpp.TestJVpp.test_vpp_ioamtrace_callback_api] ERROR: test_jvpp.TestJVpp.test_vpp_ioamtrace_future_api [test_jvpp.TestJVpp.test_vpp_ioamtrace_future_api] ERROR: test_jvpp.TestJVpp.test_vpp_snat_callback_api [test_jvpp.TestJVpp.test_vpp_snat_callback_api] ERROR: test_jvpp.TestJVpp.test_vpp_snat_future_api [test_jvpp.TestJVpp.test_vpp_snat_future_api] Testcase name: LDP Cut Thru Tests FAILURE: test_vcl.LDPCutThruTestCase.test_ldp_cut_thru_iperf3 [test_vcl.LDPCutThruTestCase.test_ldp_cut_thru_iperf3] Testcase name: ACL plugin connection-oriented extended testcases ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_0000_conn_prepare_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_0000_conn_prepare_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_0001_basic_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_0001_basic_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_0002_basic_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_0002_basic_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_0005_clear_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_0005_clear_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_0006_clear_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_0006_clear_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_0011_active_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_0011_active_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_0012_active_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_0012_active_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_1001_basic_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_1001_basic_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_1002_basic_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_1002_basic_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_1005_clear_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_1005_clear_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_1006_clear_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_1006_clear_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_1011_active_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_1011_active_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_1012_active_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_1012_active_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_2000_prepare_for_tcp_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_2000_prepare_for_tcp_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_2001_tcp_transient_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_2001_tcp_transient_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_2002_tcp_transient_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_2002_tcp_transient_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_2003_tcp_transient_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_2003_tcp_transient_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_2004_tcp_transient_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_2004_tcp_transient_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_2005_tcp_transient_teardown_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_2005_tcp_transient_teardown_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_2006_tcp_transient_teardown_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_2006_tcp_transient_teardown_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_3001_tcp_transient_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_3001_tcp_transient_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_3002_tcp_transient_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_3002_tcp_transient_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_3003_tcp_transient_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_3003_tcp_transient_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_3004_tcp_transient_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_3004_tcp_transient_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_3005_tcp_transient_teardown_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_3005_tcp_transient_teardown_conn_test] ERROR: test_acl_plugin_conns.ACLPluginConnTestCase.test_3006_tcp_transient_teardown_conn_test [test_acl_plugin_conns.ACLPluginConnTestCase.test_3006_tcp_transient_teardown_conn_test] Testcase name: LDP Thru Host Stack Echo FAILURE: test_vcl.LDPThruHostStackEcho.test_ldp_thru_host_stack_echo [test_vcl.LDPThruHostStackEcho.test_ldp_thru_host_stack_echo] Testcase name: Bidirectional Forwarding Detection (BFD) - API ERROR: test_bfd.BFDAPITestCase.test_activate_auth [test_bfd.BFDAPITestCase.test_activate_auth] ERROR: test_bfd.BFDAPITestCase.test_add_auth_nonexistent_key [test_bfd.BFDAPITestCase.test_add_auth_nonexistent_key] ERROR: test_bfd.BFDAPITestCase.test_add_bfd [test_bfd.BFDAPITestCase.test_add_bfd] ERROR: test_bfd.BFDAPITestCase.test_add_bfd6 [test_bfd.BFDAPITestCase.test_add_bfd6] ERROR: test_bfd.BFDAPITestCase.test_add_bfd_sha1 [test_bfd.BFDAPITestCase.test_add_bfd_sha1] ERROR: test_bfd.BFDAPITestCase.test_add_sha1_keys [test_bfd.BFDAPITestCase.test_add_sha1_keys] ERROR: test_bfd.BFDAPITestCase.test_change_key [test_bfd.BFDAPITestCase.test_change_key] ERROR: test_bfd.BFDAPITestCase.test_deactivate_auth [test_bfd.BFDAPITestCase.test_deactivate_auth] ERROR: test_bfd.BFDAPITestCase.test_double_add [test_bfd.BFDAPITestCase.test_double_add] ERROR: test_bfd.BFDAPITestCase.test_double_add_sha1 [test_bfd.BFDAPITestCase.test_double_add_sha1] ERROR: test_bfd.BFDAPITestCase.test_mod_bfd [test_bfd.BFDAPITestCase.test_mod_bfd] ERROR: test_bfd.BFDAPITestCase.test_set_del_udp_echo_source [test_bfd.BFDAPITestCase.test_set_del_udp_echo_source] ERROR: test_bfd.BFDAPITestCase.test_shared_sha1_key [test_bfd.BFDAPITestCase.test_shared_sha1_key] Testcase name: LDP Thru Host Stack Iperf FAILURE: test_vcl.LDPThruHostStackIperf.test_ldp_thru_host_stack_iperf3 [test_vcl.LDPThruHostStackIperf.test_ldp_thru_host_stack_iperf3] Testcase name: Bidirectional Forwarding Detection (BFD) (SHA1 auth) ERROR: test_bfd.BFDSHA1TestCase.test_session_up [test_bfd.BFDSHA1TestCase.test_session_up] Testcase name: Punt Socket for IPv6 ERROR: test_punt.TestIP6PuntSocket.test_punt_socket_dump [test_punt.TestIP6PuntSocket.test_punt_socket_dump] ERROR: test_punt.TestIP6PuntSocket.test_punt_socket_traffic_multi_port_multi_sockets [test_punt.TestIP6PuntSocket.test_punt_socket_traffic_multi_port_multi_sockets] ERROR: test_punt.TestIP6PuntSocket.test_punt_socket_traffic_multi_ports_single_socket [test_punt.TestIP6PuntSocket.test_punt_socket_traffic_multi_ports_single_socket] ERROR: test_punt.TestIP6PuntSocket.test_punt_socket_traffic_single_port_single_socket [test_punt.TestIP6PuntSocket.test_punt_socket_traffic_single_port_single_socket] Testcase name: Disable Flowprobe feature ERROR: test_flowprobe.DisableFP.test_0001 [test_flowprobe.DisableFP.test_0001] Testcase name: Disable IPFIX ERROR: test_flowprobe.DisableIPFIX.test_0001 [test_flowprobe.DisableIPFIX.test_0001] Testcase name: VPP Object Model Test ERROR: test_vom.VOMTestCase.test_vom_cpp [test_vom.VOMTestCase.test_vom_cpp] Testcase name: BFD-FIB interactions (IPv6) ERROR: test_bfd.BFDFIBTestCase.test_session_with_fib [test_bfd.BFDFIBTestCase.test_session_with_fib] Testcase name: Bidirectional Forwarding Detection (BFD) ERROR: test_bfd.BFD4TestCase.test_echo [test_bfd.BFD4TestCase.test_echo] ERROR: test_bfd.BFD4TestCase.test_echo_looped_back [test_bfd.BFD4TestCase.test_echo_looped_back] ERROR: test_bfd.BFD4TestCase.test_intf_deleted [test_bfd.BFD4TestCase.test_intf_deleted] ERROR: test_bfd.BFD4TestCase.test_session_down [test_bfd.BFD4TestCase.test_session_down] ERROR: test_bfd.BFD4TestCase.test_session_up [test_bfd.BFD4TestCase.test_session_up] ERROR: test_bfd.BFD4TestCase.test_session_up_by_ip [test_bfd.BFD4TestCase.test_session_up_by_ip] Testcase name: VXLAN-GPE Test Case ERROR: test_vxlan_gpe.TestVxlanGpe.test_decap [test_vxlan_gpe.TestVxlanGpe.test_decap] ERROR: test_vxlan_gpe.TestVxlanGpe.test_encap [test_vxlan_gpe.TestVxlanGpe.test_encap] ERROR: test_vxlan_gpe.TestVxlanGpe.test_ucast_flood [test_vxlan_gpe.TestVxlanGpe.test_ucast_flood] Testcase name: Re-enable Flowprobe feature ERROR: test_flowprobe.ReenableFP.test_0001 [test_flowprobe.ReenableFP.test_0001] Testcase name: LDP IPv6 Cut Thru Tests FAILURE: test_vcl.LDPIpv6CutThruTestCase.test_ldp_ipv6_cut_thru_echo [test_vcl.LDPIpv6CutThruTestCase.test_ldp_ipv6_cut_thru_echo] TESTCASES WHERE NO TESTS WERE SUCCESSFULLY EXECUTED: VXLAN over IPv6 Test Case ============================================================================== 0 attempt(s) left. Change-Id: Id202ed6ee7f57670f34ec87380244c568b509416 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-12-20Tests: Cleanup @skip decorator.Paul Vinciguerra1-35/+35
The runnning environment is static as of module load time, so only evalute the conditions once at module load time. Track-by: VPP-1518 Change-Id: I73b0d17ae1ff90789e70307f168d43921829aec8 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-11-27VPP-1508 Fix for bug introduced in tests on use of repr.Paul Vinciguerra1-2/+2
This fixes the change from https://gerrit.fd.io/r/#/c/16175/ ... ====== Totals ====== Ran: 856 tests in 2123.0000 sec. - Passed: 667 - Skipped: 157 - Expected Fail: 0 - Unexpected Success: 0 - Failed: 32 Sum of execute time for each test: 1641.0832 sec. ============== Worker Balance ============== - Worker 0 (416 tests) => 0:35:06.788054 - Worker 1 (440 tests) => 0:31:13.814911 Test id Runtime (s) -------------------------------------------------------------------------------------- ----------- test.test_vcl.VCLCutThruTestCase.test_ldp_cut_thru_bi_dir_nsock 120.382 test.test_vcl.VCLThruHostStackGroupBTestCase.test_ldp_thru_host_stack_bi_dir_nsock 60.368 test.test_vcl.VCLIpv6ThruHostStackGroupBTestCase.test_ldp_thru_host_stack_bi_dir_nsock 60.356 test.test_igmp.TestIgmp.test_igmp_host 47.411 test.test_reassembly.TestFIFReassembly.test_fif6 38.561 test.test_reassembly.TestFIFReassembly.test_fif4 37.045 test.test_gbp.TestGBP.test_gbp 30.041 test.test_dhcp.TestDHCP.test_dhcp_proxy 29.339 test.test_vcl.VCLCutThruTestCase.test_ldp_cut_thru_iperf3 20.489 test.test_neighbor.ARPTestCase.test_arp 19.004 Change-Id: Ic1565f14962f157d5041230de3aeeab0b85f21e1 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-11-25VPP-1508 python3 tests: python3 repr.Paul Vinciguerra1-9/+13
Use six.reprlib. Uses repr for python 2 and reprlib for python 3. Change-Id: Ia343a492d533bd511ed57166381e10a37e452d36 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-11-08make test: bfd refactorKlement Sekera1-1/+1
Change-Id: I14a126521d8c8138904c8b9da05d4144c72c51a5 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-10-02BFD: add get echo source API (VPP-1367)Matus Fabian1-0/+45
Change-Id: I45f540128e038ddb17ba96ce30965e8f7c732067 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-09-11GBP Endpoint UpdatesNeale Ranns1-1/+2
- common types on the API - endpoints keyed in various ways for DP lookup - conparison functions for VPP IP address types Change-Id: If7ec0bbc5cea71fd0983fe78987d147ec1bd7ec8 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-06-25make test: fix broken interfaces #2Klement Sekera1-2/+2
Change-Id: I9d5b5d925fd2c09a1113fc51e433a16d729a241b Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-06-24Revert "Revert "make test: fix broken interfaces""Klement Sekera1-3/+3
This reverts commit c8efa29b6f9a91381897b54f1147daf922ed7164. Change-Id: I1d5c5773d5f86a63073e255336bd9de628e26179 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-06-22Revert "make test: fix broken interfaces"Ole Troan1-3/+3
This reverts commit d5c60b96a3fd93916fc4af5c8d6d25625c28242e. Change-Id: I3632b9c3f76c615aee897f28f76d094e7031e689 Signed-off-by: Ole Troan <ot@cisco.com>
2018-06-22make test: fix broken interfacesKlement Sekera1-3/+3
Change-Id: I2e092774f81503e04b53cc6c6b5d357fe3fc52ab Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-04-17Add logging supportDamjan Marion1-2/+6
Change-Id: Ieac9cf50156dbbb4962411e900d59256441915ef Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-10-21test bfd - DPO_PROTO_IP6 is part of DpoProtoGabriel Ganne1-2/+2
Change-Id: I63d336a1ba366a60a2a8f1124e3f37f742cccb65 Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
2017-08-08L2 over MPLSNeale Ranns1-3/+3
[support for VPWS/VPLS] - switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths - VLIB nodes to handle pop/push of MPLS labels to L2 Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-02BFD: don't crash if interface is deletedKlement Sekera1-0/+30
Instead, drop the BFD session associated with it.. Change-Id: Ie09877d5c94844be2e833900d9dde7f23edaf8cd Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-04-24make test: mark all BFD tests as extendedKlement Sekera1-0/+5
Change-Id: Iaed59cca1c9fd69eadb86c15be6417a956cb9d5a Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-04-20make test: improve bfd reliabilityKlement Sekera1-18/+30
Change-Id: Iaf446a2d7d8e595c3379fb9ed61a954351c17b90 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-04-06BFD-FIB interactionsNeale Ranns1-1/+103
- single-hop BFD: attach a delegate to the appropriate adjacency - multi-hop BFD [not supported yet]: attach a delegate to the FIB entry. adjacency/fib_entry state tracks the BFD session state. when the state is down the object does not contribute forwarding hence and hence dependent objects will not use it. For example, if a route is ECMP via two adjacencies and one of them is BFD down, then only the other is used to forward (i.e. we don't drop half the traffic). Change-Id: I0ef53e20e73b067001a132cd0a3045408811a822 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-03make test: relax BFD time intervalsKlement Sekera1-7/+9
Increased time intervals mean longer test runs, but also reduce the chance of getting annoying (especially in gerrit) random failures. Now that tests are split into `basic' and `all', the increased runtime of BFD tests (of which majority doesn't run in basic case) doesn't matter too much.. Change-Id: I4a15bb4facad634f123bc9cc6f45eddbf4976fd1 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-03-13Add MAC address check in ethernet-input node if interface in L3 modeJohn Lo1-1/+10
Interface can be in promiscuous mode if more than one of its sub- interface is in L2 mode. In promiscuous mode, L3 interface need to verify DMAC of packet to match that of the interface and drop if not. This check was done on sub-interface only and now also added to main interface path. Fix incorrect MAC addresses in the flow-per-pkt plugin test, which caused it to fail. Fix MAC address usage in BFD tests. Change-Id: I12a17ec05c7ab298ad10d400c90d082c97eca521 Signed-off-by: John Lo <loj@cisco.com> Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-03-08make test: split into basic and extended testsKlement Sekera1-2/+33
Implement plumbing to allow decorating tests as extended, e.g.: @unittest.skipUnless(running_extended_tests(), "part of extended tests") both methods and classes can be decorated this way. Change make test and make test-debug to run only non-extended tests. Introduce make test-all and make test-all-debug to run the full suite. Run full suite as part of make verify. Decorate most BFD tests as extended. Change-Id: I3bc64f59e9fe238f7f767d7e043dc165d03e9dfa Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-03-02BFD: command line interfaceKlement Sekera1-20/+559
Implement command line interface to the BFD binary APIs. Add corresponding unit tests. Change-Id: Ia0542d0bc4c8d78e6f7b777a08fd94ebfe4d524f Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-26BFD: echo functionKlement Sekera1-48/+429
Change-Id: Ib1e301d62b687d4e42434239e7cd412065c28da0 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-17BFD: put session admin-up/admin-downKlement Sekera1-8/+36
Change-Id: I7d8889dce8495607106593ad83320c9af0f2fa07 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-15BFD: loop back echo packetsKlement Sekera1-19/+103
Change-Id: I772b63ac25ebfccaff9ab9d8d0b1445e85f21df7 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-14BFD: respect remote demand modeKlement Sekera1-328/+509
Change-Id: I5063d31f5305c848043afb32fcacff6e61aed79f Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-08make test: BFD tests speedupKlement Sekera1-2/+4
Change-Id: I0b3064a311f28ebf7cd9db0a59cb04c7c25c9d58 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-08BFD: modify session parametersKlement Sekera1-13/+151
Change-Id: I666e5c0cc71a3693640960c93cdd1907f84fbe23 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-02BFD: SHA1 authenticationKlement Sekera1-37/+696
Add authentication support to BFD feature. Out of three existing authentication types, implement SHA1 (sole RFC requirement). Simple password is insecure and MD5 is discouraged by the RFC, so ignore those. Add/change APIs to allow configuring BFD authentication keys and their usage with BFD sessions. Change-Id: Ifb0fb5b19c2e72196d84c1cde919bd4c074ea415 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-01-25make test: elegantly handle expected API failuresKlement Sekera1-6/+3
Allow writing simple code to expect API failure when needed: with self.vapi.expect_negative_api_retval(): do_api_call() # expected to return negative retval in response Change-Id: Id58d91d9ce38d20ad6ff7a43a6897e79ffbd23bf Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-01-17BFD: IPv6 supportKlement Sekera1-79/+142
Change-Id: Iaa9538c7cca500c04cf2704e5bf87480543cfcdf Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-01-17make test: add checkstyle targetKlement Sekera1-2/+0
Change-Id: I59d3c3bc77474c96e1d6fa51811c1b13fb9a6c5b Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-01-11BFD: fix bfd_udp_add APIKlement Sekera1-8/+25
Fix reporting of bs_index in the return message. Enhance test suite to cover this case. Change-Id: I37d35b850818bc1a05abe67ca919c22aeac978b6 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-01-03BFD: immediately honor reduced remote_min_rx intervalKlement Sekera1-24/+62
Change-Id: I7f09b45c926557d2ad0e2706b38fa56ff8194a3d Signed-off-by: Klement Sekera <ksekera@cisco.com>
2016-12-23make test: improve handling of packet capturesKlement Sekera1-4/+4
Perform accounting of expected packets based on created packet infos. Use this accounting info to automatically expect (and verify) the correct number of packets to be captured. Automatically retry the read of the capture file if scapy raises an exception while doing so to handle rare cases when capture file is read while only partially written during busy wait. Don't fail assert_nothing_captured if only junk packets arrived. Change-Id: I16ec2e9410ef510d313ec16b7e13c57d0b2a63f5 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2016-12-19make test: work around timing issue in bfd testKlement Sekera1-1/+1
Change-Id: I3f70091950b9288670969e54eadd35ac733905e4 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2016-12-16make test: improve robustness and performanceKlement Sekera1-1/+1
Introduce an API which asserts empty capture for interface. Throw exception in old API if the capture does not exist, thus making it clear if the test expects packets to arrive or not. Improve performance by not doing sleeps after starting the packet generator, rather lazily deleting captures when needed. Fix wrong usage of packet.show() in various tests. Change-Id: I456cb23316eef99b3f35f80344fe595c4db9a21c Signed-off-by: Klement Sekera <ksekera@cisco.com>
2016-12-09BFD: handle timing wheel prematurely firing eventsKlement Sekera1-3/+3
Improve handling of timeouts. Add a workaround for when timing wheel fires an event a tiny amount of time before it should actually be fired. Don't delete unneeded events at all from timing wheel, instead ignoring unexpected events. Enable the skipped BFD test, which passes now. Change-Id: I6ffd4fc0ba7a049ffe63bb0e5290641a7300dd6f Signed-off-by: Klement Sekera <ksekera@cisco.com>
2016-12-09BFD: fix timing in the main loopKlement Sekera1-34/+35
Properly wakeup the main process loop only when necessary to avoid missed events. Improve BFD unit test reliability and speed. Add timestamps to logs and replace Queue with more efficient deque. Change-Id: I01255a02057d3146917b43b669ccdc74f31ef0c8 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2016-12-08BFD: improve ip header handling, fix assertKlement Sekera1-0/+1
Instead of storing a pointer, store an offset within vlib_buffer marking the start of the ip header (similar to storing start of ethernet header). Handle negative timeout in the bfd process main loop. Change-Id: I05a1ff3ac41da5bdc3b2ac6f9e03b3241994688b Signed-off-by: Klement Sekera <ksekera@cisco.com>
2016-12-07BFD: basic asynchronous session up/downKlement Sekera1-0/+273
This is a work-in-progress basic BFD session handling. Only asynchronous mode is supported at the moment. Setting the session flags doesn't work. Change-Id: Idba27f721b5c35be5a66a6d202a63d23ff7ecf6f Signed-off-by: Klement Sekera <ksekera@cisco.com>