aboutsummaryrefslogtreecommitdiffstats
path: root/test/test_dhcp.py
AgeCommit message (Collapse)AuthorFilesLines
2024-11-27tests: remove use of python 2.7 compatibility module 'six'Dave Wallace1-37/+32
- python 2.7 is no longer supported, clean up technical debt with use of 'six' module in test code Type: test Change-Id: I70e737920a6048c5e9caa20fece5ee21b91bb353 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2024-10-23dhcp: fix buffer length after adding new optionArtem Glazychev1-0/+3
The size of dhcp option should be o.length + 2 additional bytes of the header. Incorrect offset results in an extra byte at the end of the packet: ... 0120 04 00 00 00 04 05 04 AC 10 04 01 FF 00 ... RFC2131 says the last should be the 'end' option (ff) Type: fix Change-Id: I056d755d29465aab8c1c55a0b930f65ece6fafce Signed-off-by: Artem Glazychev <glazychev@mts.ru>
2024-08-07tests: update scapy to version 2.4.5Dave Wallace1-8/+8
- Required for Ubuntu 24.04 LTS jobs - temporarily disable TestIpsecEsp1 and TestIpsecAhAll tests until a patch can be added to fix them Type: test Change-Id: I1ae7b170117182c3252629bbbb770775e2c496c9 Signed-off-by: Benoît Ganne <bganne@cisco.com> Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2024-07-12tests: skip more excluded plugin testsDmitry Valter1-0/+2
Check and skip VPP_EXCLUDED_PLUGINS tests for most of plugins. Type: improvement Signed-off-by: Dmitry Valter <d-valter@yandex-team.com> Change-Id: I23fd3666729251c639aa8da72a676058e3f5bb4e
2023-11-03tests: refactor asf framework codeDave Wallace1-8/+5
- Make framework.py classes a subset of asfframework.py classes - Remove all packet related code from asfframework.py - Add test class and test case set up debug output to log - Repatriate packet tests from asf to test directory - Remove non-packet related code from framework.py and inherit them from asfframework.py classes - Clean up unused import variables - Re-enable BFD tests on Ubuntu 22.04 and fix intermittent test failures in echo_looped_back testcases (where # control packets verified but not guaranteed to be received during test) - Re-enable Wireguard tests on Ubuntu 22.04 and fix intermittent test failures in handshake ratelimiting testcases and event testcase - Run Wiregard testcase suites solo - Improve debug output in log.txt - Increase VCL/LDP post sleep timeout to allow iperf server to finish cleanly. - Fix pcap history files to be sorted by suite and testcase and ensure order/timestamp is correct based on creation in the testcase. - Decode pcap files for each suite and testcase for all errors or if configured via comandline option / env var - Improve vpp corefile detection to allow complete corefile generation - Disable vm vpp interfaces testcases on debian11 - Clean up failed unittest dir when retrying failed testcases and unify testname directory and failed linknames into framwork functions Type: test Change-Id: I0764f79ea5bb639d278bf635ed2408d4d5220e1e Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2022-05-10tests: replace pycodestyle with blackKlement Sekera1-530/+641
Drop pycodestyle for code style checking in favor of black. Black is much faster, stable PEP8 compliant code style checker offering also automatic formatting. It aims to be very stable and produce smallest diffs. It's used by many small and big projects. Running checkstyle with black takes a few seconds with a terse output. Thus, test-checkstyle-diff is no longer necessary. Expand scope of checkstyle to all python files in the repo, replacing test-checkstyle with checkstyle-python. Also, fixstyle-python is now available for automatic style formatting. Note: python virtualenv has been consolidated in test/Makefile, test/requirements*.txt which will eventually be moved to a central location. This is required to simply the automated generation of docker executor images in the CI. Type: improvement Change-Id: I022a326603485f58585e879ac0f697fceefbc9c8 Signed-off-by: Klement Sekera <klement.sekera@gmail.com> Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2022-02-17tests: make tests less make dependentKlement Sekera1-1/+1
Implement command line argument parsing instead of passing arguments via environment variables. Add script for running tests without having to invoke make. Deprecate running tests via make. Type: improvement Change-Id: I2e3054a61a2ae25d460e9be00be7d7705fbf943e Signed-off-by: Klement Sekera <ksekera@cisco.com> Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2021-05-13tests: move test source to vpp/testDave Wallace1-0/+1686
- Generate copyright year and version instead of using hard-coded data Type: refactor Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I6058f5025323b3aa483f5df4a2c4371e27b5914e
2019-10-07dhcp: Move to pluginNeale Ranns1-1650/+0
Type: feature Change-Id: I3fe27a8ef577741d9a5c4f090ec91cf68fb44fe3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-10-03dhcp: API cleanupJakub Grajciar1-140/+123
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: Ia63d920788add2584060a240321acced7a471640
2019-08-06ethernet: change to mark the CFI bit in the L2 header.Prashant Maheshwari1-1/+1
Type: fix Fixes: 039cbfe2 Signed-off-by: Prashant Maheshwari <pmahesh2@cisco.com> Change-Id: Idca91c73758824688dd6ce61df994be66753d838
2019-07-26dhcp ip: DSCP settings for transmitted DHCP packetsNeale Ranns1-10/+62
Type: feature - Define the ip_dscp_t and use in the IP headers - Add DSCP setting to the DHCP client for use with packet TX Change-Id: If220dde0017ea78793747d65f53e11daf23a28fa Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-26dhcp: send unicast and broadcast packets via the IP adjacencyNeale Ranns1-16/+62
Type: feature this means DHCP packets are subject to the IP features configured on the interface - the unicast packets already were sent throught the adj - added UT for DHCP client sending a unicast renewal Change-Id: Id50db0b71822f44bf7cb639a524195cdc9873526 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-10Tests Cleanup: Fix missing calls to setUpClass/tearDownClass.Paul Vinciguerra1-0/+8
Continuation/Part 2 of https://gerrit.fd.io/r/#/c/17092/ Change-Id: Id0122d84eaf2c05d29e5be63a594d5e528ee7c9a Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-11VPP-1508: Use scapy.compat to manage packet level library differences.Paul Vinciguerra1-2/+3
Change-Id: Icdf6abc9e53d33b26fd1d531c7dda6be0bb9cb55 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-04test framework: Fix wrapper functions to match API message names.Ole Troan1-10/+10
In preparation to remove the wrappers in vpp_papi_provider.py, ensure names used in tests match the actual API message names. Change-Id: I230ca4eb75aa727ff68d702e085a2edbbc6b6d19 Signed-off-by: Ole Troan <ot@cisco.com>
2019-01-31DHCP-test: more robust sleep checkNeale Ranns1-8/+13
Change-Id: I48c382797239dc305e01cc35124140d6ce16149a Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-01-30Use IP and MAC API types for neighborsNeale Ranns1-5/+5
use address_t and mac_address_t for IPv6 and ARP entries and all other API calls in ip.api aprat from the route ones, that will follow in a separate commit Change-Id: I67161737c2184d3f8fc1e79ebd2b55121c5b0191 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-12-18PAPI: Add MACAddress object wrapper for vl_api_mac_address_tOle Troan1-11/+11
Change the definition of vl_api_mac_address_t to an aliased type. Change-Id: I1434f316d0fad6a099592f39bceeb8faeaf1d134 Signed-off-by: Ole Troan <ot@cisco.com>
2018-12-10Test framework: StringIO fixes for Python3Ole Troan1-2/+1
Add 2/3 support to binarytomac and mactobinary and move to vpp_mac.py Change-Id: I3dc7e4a24486aee22140c781aae7e44e58935877 Signed-off-by: Ole Troan <ot@cisco.com>
2018-07-18make_test: dhcp - add lease time test and wrong XID in OFFER testJan Gelety1-7/+102
- negative test with wrong XID in OFFER not implemented as issue reported in Jira ticket VPP-99 still not fixed Jira: CSIT-1147 Change-Id: I4ebc622bd81fed421919bc0397a12e32cb26fa1d Signed-off-by: Jan Gelety <jgelety@cisco.com>
2018-06-07DHCP Client DumpNeale Ranns1-0/+23
- use types on the DHCP API so that the same data is sent in comfing messages and in dumps - add the DHCP client dump API - update VOM to refelct API changes - rename VOM class dhcp_config* dhcp_client* - the VOM dhcp_client class maintains the lease data (which it reads on a dump) for clients to read Change-Id: I2a43463937cbd80c01d45798e74b21288d8b8ead Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-03-23Add client hw address to DHCP offer and ack in test caseNeale Ranns1-6/+11
Change-Id: Ifc9bb4ea39b504372a6a39bbf56c29761d0c6111 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-23Drop dhcp pkts w/ hardware address mismatchesDave Barach1-0/+1
Add a few dhcp client rx packet/state counters Temporarily disable the dhcp client unit test, since it trips over the newly-added hardware address check. Change-Id: I7f68607e6ed3d738cba357c3fe76664a99b71cd8 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-19Scapy upgrade to 2.4.0.rc5Neale Ranns1-1/+2
- many of the patches fd.io applies in test/patches/2.3.3 are now upstreamed in 2.4 - 2.4 adds support for IGMPv3 which is my main motivation for the upgrade Change-Id: If2c0a524e3cba320b4a5d8cd07817c6ea2bf0c5a Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-01-23For DHCP client configuration control the setting of the broadcast flag in theNeale Ranns1-4/+105
DISCOVER message sent. According to RFC2131: In the case of a client using DHCP for initial configuration (before the client's TCP/IP software has been completely configured), DHCP requires creative use of the client's TCP/IP software and liberal interpretation of RFC 1122. The TCP/IP software SHOULD accept and forward to the IP layer any IP packets delivered to the client's hardware address before the IP address is configured; DHCP servers and BOOTP relay agents may not be able to deliver DHCP messages to clients that cannot accept hardware unicast datagrams before the TCP/IP software is configured. To work around some clients that cannot accept IP unicast datagrams before the TCP/IP software is configured as discussed in the previous paragraph, DHCP uses the 'flags' field [21]. The leftmost bit is defined as the BROADCAST (B) flag. The semantics of this flag are discussed in section 4.1 of this document. The remaining bits of the flags field are reserved for future use. They MUST be set to zero by clients and ignored by servers and relay agents. Figure 2 gives the format of the 'flags' field. this changes means VPP conforms to the: "SHOULD accept and forward to the IP layer any IP packets delivered to the client's hardware address before the IP address is configured" with the caveat that VPP allows DHCP packets destined to the stanard client DHCP port to be delivered. With this enhancement the control-plane is now able to choose the setting of the broadcast flag. Change-Id: Ia4eb2c9bb1e30c29f9192facc645e9533641955a Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-01-09test: consolidate the multiple versions of send_and_*Neale Ranns1-7/+0
Change-Id: I7fa7d0ebf73dab8264a2e5ddbd412600d78ead05 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-16Add Support of DHCP VSS Type 0 where VPN-ID is ASCIIJohn Lo1-170/+298
Enhence support of DHCP VSS (Virtual Subnet Selection) to include VSS type 0 where VSS info is a NVT (Network Virtual Terminal) ASCII VPN ID where the ASCII string MUST NOT be terminated with a zero byte. Existing code already support VSS type 1, where VSS information is a RFC 2685 VPN-ID of 7 bytes with 3 bytes OUI and 4 bytes VPN index, and VSS type 255 indicating global VPN. Change-Id: I54edbc447c89a2aacd1cc9fc72bd5ba386037608 Signed-off-by: John Lo <loj@cisco.com>
2017-10-25VPP-1033: Python API support arbitrary sized input parameters.Ole Troan1-1/+2
Dynamically calculate the required buffer size to pack into based on message definition. Also add input parameter length checking. Change-Id: I7633bec596e4833bb328fbf63a65b866c7985de5 Signed-off-by: Ole Troan <ot@cisco.com>
2017-09-11FIB table add/delete APINeale Ranns1-3/+21
part 2; - this adds the code to create an IP and MPLS table via the API. - but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass. Change-Id: Id124d884ade6cb7da947225200e3bb193454c555 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-03DHCP Client: receive unicast ACKsNeale Ranns1-21/+71
despite VPP DHCP client setting neither ciaddr nor giaddr and setting the broadcast bit (see RFC 2131 section 4.1) some DHCP servers will still send a unicast DCHPACK. So as not to drop this VPP must have both 1) a receive FIB entry for the OFFERED IP adress and 2) a 'don't drop me because of uRPF' FIB entry for the DHCP server's address. Change-Id: I167d858deb45629318cbdccf5bf67d971730a42f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-07-18DHCP client option 61 "client_id"Neale Ranns1-2/+32
the existing seeting of client_id to a VPP version number was unused and so overridden Change-Id: If9ebea936336f1fcca8d07e67186c95f8f8f0ccd Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-07-18DHCP client - remove interface address when DHCP de-configuredNeale Ranns1-21/+137
Change-Id: I63c59e3c13859b51999d283774f7783ef0a6a5ed Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-19Learn IP6 link-local ND entries from NSs sourced from link-local addressNeale Ranns1-7/+1
Change-Id: I4c3ce4d58df7977490fc94991291422ea1e31ee3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-07DHCP Multiple Servers (VPP-602, VPP-605)Neale Ranns1-44/+312
Multiple DHCP (4 and/or 6) servers can be added and removed through multiple calls to the 'set dhcp server' API. All 4/6/ discover/solicit messages will then be replicated to all servers in the list. The expectation is that the servers/system is configured in such a way that this is viable. If VSS information is providied for the clinet VRF which also has multiple servers configured, then the same VSS information is sent to each server. Likewise the source address of packets sent to from VPP to each server is the same. Change-Id: I3287cb084c84b3f612b78bc69cfcb5b9c1f8934d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-03Changing the IP table for an interface is an error if the interface already ↵Neale Ranns1-0/+7
has an address configured (VPP-601) Change-Id: I311fc264f73dd3b2b3ce9d7d1c33cd0515b36c4a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-16Consolidate DHCP v4 and V6 implementation. No functional change intendedNeale Ranns1-1/+1
The DHCP proxy and VSS information maintained by VPP is the same for v4 and v6, so we can manage this state using the same code. Packet handling is cleary different, so this is kept separate. Change-Id: I10f10cc1f7f19debcd4c4b099c6de64e56bb0c69 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-21dhcp: multiple additionsNeale Ranns1-82/+84
DHCP additions: 1) DHCPv4 will only relay a message back to the client, if the Option82 information is present. So make this the default. 2) It is no longer possible to select via the API to "insert circuit ID" - since this is now default 3) Remove the version 2 API since it's now the same as version 1. 4) Adding the VSS option is now conditional only on the presence of VSS config (not the 'insert' option in the set API) 5) DHCP proxy dump via API Change-Id: Ia7271ba8c1d4dbf34a02c401d268ccfbb1b74f17 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-01-27IP Multicast FIB (mfib)Neale Ranns1-16/+0
- IPv[46] mfib tables with support for (*,G/m), (*,G) and (S,G) exact and longest prefix match - Replication represented via a new replicate DPO. - RPF configuration and data-plane checking - data-plane signals sent to listening control planes. The functions of multicast forwarding entries differ from their unicast conterparts, so we introduce a new mfib_table_t and mfib_entry_t objects. However, we re-use the fib_path_list to resolve and build the entry's output list. the fib_path_list provides the service to construct a replicate DPO for multicast. 'make tests' is added to with two new suites; TEST=mfib, this is invocation of the CLI command 'test mfib' which deals with many path add/remove, flag set/unset scenarios, TEST=ip-mcast, data-plane forwarding tests. Updated applications to use the new MIFB functions; - IPv6 NS/RA. - DHCPv6 unit tests for these are undated accordingly. Change-Id: I49ec37b01f1b170335a5697541c8fd30e6d3a961 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-01-26DHCPv[46] proxy testsNeale Ranns1-0/+739
Change-Id: I6aaf9c602cd515ed9d4416d286f9191d048c1a87 Signed-off-by: Neale Ranns <nranns@cisco.com>