aboutsummaryrefslogtreecommitdiffstats
path: root/test/test_gso.py
AgeCommit message (Collapse)AuthorFilesLines
2023-11-03tests: refactor asf framework codeDave Wallace1-10/+4
- Make framework.py classes a subset of asfframework.py classes - Remove all packet related code from asfframework.py - Add test class and test case set up debug output to log - Repatriate packet tests from asf to test directory - Remove non-packet related code from framework.py and inherit them from asfframework.py classes - Clean up unused import variables - Re-enable BFD tests on Ubuntu 22.04 and fix intermittent test failures in echo_looped_back testcases (where # control packets verified but not guaranteed to be received during test) - Re-enable Wireguard tests on Ubuntu 22.04 and fix intermittent test failures in handshake ratelimiting testcases and event testcase - Run Wiregard testcase suites solo - Improve debug output in log.txt - Increase VCL/LDP post sleep timeout to allow iperf server to finish cleanly. - Fix pcap history files to be sorted by suite and testcase and ensure order/timestamp is correct based on creation in the testcase. - Decode pcap files for each suite and testcase for all errors or if configured via comandline option / env var - Improve vpp corefile detection to allow complete corefile generation - Disable vm vpp interfaces testcases on debian11 - Clean up failed unittest dir when retrying failed testcases and unify testname directory and failed linknames into framwork functions Type: test Change-Id: I0764f79ea5bb639d278bf635ed2408d4d5220e1e Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2023-02-06ipsec: fix SA names consistency in testsArthur de Kerhor1-12/+12
In some IPsec tests, the SA called scapy_sa designs the SA that encrypts Scapy packets and decrypts them in VPP, and the one called vpp_sa the SA that encrypts VPP packets and decrypts them with Scapy. However, this pattern is not consistent across all tests. Some tests use the opposite logic. Others even mix both correlating scapy_tra_spi with vpp_tra_sa_id and vice-versa. Because of that, sometimes, the SA called vpp_sa_in is used as an outbound SA and vpp_sa_out as an inbound one. This patch forces all the tests to follow the same following logic: - scapy_sa is the SA used to encrypt Scapy packets and decrypt them in VPP. It matches the VPP inbound SA. - vpp_sa is the SA used to encrypt VPP packets and decrypt them in Scapy. It matches the VPP outbound SA. Type: fix Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com> Change-Id: Iadccdccbf98e834add13b5f4ad87af57e2ea3c2a
2022-05-10tests: replace pycodestyle with blackKlement Sekera1-262/+390
Drop pycodestyle for code style checking in favor of black. Black is much faster, stable PEP8 compliant code style checker offering also automatic formatting. It aims to be very stable and produce smallest diffs. It's used by many small and big projects. Running checkstyle with black takes a few seconds with a terse output. Thus, test-checkstyle-diff is no longer necessary. Expand scope of checkstyle to all python files in the repo, replacing test-checkstyle with checkstyle-python. Also, fixstyle-python is now available for automatic style formatting. Note: python virtualenv has been consolidated in test/Makefile, test/requirements*.txt which will eventually be moved to a central location. This is required to simply the automated generation of docker executor images in the CI. Type: improvement Change-Id: I022a326603485f58585e879ac0f697fceefbc9c8 Signed-off-by: Klement Sekera <klement.sekera@gmail.com> Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2022-03-04ip: rate-limit the sending of ICMP error messagesNeale Ranns1-1/+1
Type: improvement For error conditions, such as TTL expired, dest unreach, etc, Rate limit the sending of ICMP error messages. The rate limiting is done based on src,dst IP address of the received packet. the rate limit has been chosen, somewhat arbitrarily, to be 1e-3. This is the same limit as the ARP throttling. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I4a0b791cde8c941a9bf37de6aa5da56779d3cef4
2021-07-09gso: add ipsec tunnel testsMohsin Kazmi1-0/+247
Type: test Change-Id: I831bc8c21f8ce869054eafcb14542508039c1b82 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-05-13tests: move test source to vpp/testDave Wallace1-0/+722
- Generate copyright year and version instead of using hard-coded data Type: refactor Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I6058f5025323b3aa483f5df4a2c4371e27b5914e
2020-11-17tests: move GSO/GRO tests to src/vnet/gso/testDave Wallace1-713/+0
- Refactor make test code to be co-located with the vpp feature source code Type: test Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: Id9c5bf2cd01b6c1fd1750b4978d01597ee3bbf53
2020-06-16gso: fix the udp checksum in testMohsin Kazmi1-2/+2
Type: fix Change-Id: I7005e4763e73f3679c40f94bdab26d439cd23188 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-06-08vxlan: Fixed checksum caclculation offsetVladimir Isaev1-2/+2
VXLAN uses csum_offload for IPv6 packets. But without gso node we have csum calculated only for inner packet. This patch adds support for outer header csum calculation. Checksum for inner packet should be calculated before interface-output node (for example in vxlan node). Type: fix Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Signed-off-by: Vladimir Isaev <visaev@netgate.com> Change-Id: Ica68429ede4426293769207cd83c791ebe72fe56
2020-05-29gso: add checksum and payload size testingMohsin Kazmi1-49/+148
Type: test Change-Id: I9e4f7cf44d465712aa26e5dd6a0ff38588964a39 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-05-05gso: fix the make test for ipipMohsin Kazmi1-2/+15
Type: test This commit fixes the make test for GSO/IPIP which are added in following commit id: 84f91fa9c54f82c54b58ea3bf6e9ba22ff735d3a Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: I66a57fe195e626b432ff0acba3a5bdf242a7a46e
2020-05-05gso: add support for IP-IPMohsin Kazmi1-6/+199
Type: feature Change-Id: I37752af8496e0042a1da91124f3d94216b39ff11 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-04-22gso: add vxlan tunnel supportMohsin Kazmi1-50/+250
Type: feature Change-Id: I85f6ec77187a4983c66c5e22fd39fbb2cef82902 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-11-05misc: Fix python scripts shebang lineRenato Botelho do Couto1-1/+1
Type: fix Since CentOS 8, RPM build script doesn't accept '#!/usr/bin/env python' as a valid shebang line. It requires scripts to explicitly chose between python2 or python3. Change all to use python3 as suggested by Paul Vinciguerra. Depends-On: https://gerrit.fd.io/r/23170 Signed-off-by: Renato Botelho do Couto <renato@netgate.com> Change-Id: Ie72af9f60fd0609e07f05b70f8d96e738b2754d1
2019-10-18gso: python3 support in testsOle Troan1-5/+5
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I166019cc69fd01cb43f1a3fad699f3d2e5ec5b19
2019-10-14gso: Add gso feature arcMohsin Kazmi1-0/+2
Type: refactor Change-Id: Ib4a8e7e64093b2db1deda6663325080bc8337605 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-08-26gso: fix segmentation when gso_size greater than vlib buffer sizeMohsin Kazmi1-0/+32
Type: fix Ticket: VPP-1751 Change-Id: I5ffb078492adc97374290de404f2ec0102b75184 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-07-31gso: fix the test caseMohsin Kazmi1-1/+0
Type: fix Fixes: 22e9cfd760be613f33a4135e9247729b64619cc6 Change-Id: Idb198642e439dc3d54c04d8bde9d3e8382ebf830 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-07-28pg: add GSO supportMohsin Kazmi1-0/+175
Type: feature Change-Id: I72676495a85fbecc946aa266a75234cce70c3a5e Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>