summaryrefslogtreecommitdiffstats
path: root/test/test_ip4.py
AgeCommit message (Collapse)AuthorFilesLines
2021-11-15fib: re-evaluate the import/export state of a prefix.Neale Ranns1-0/+135
Type: fix re-evaluate the import/export state of a prefix when the interface it is attached to rebinds to a different table. Only attached routes have import/export requirements, so we can back walk from the glean adjacency when the interface rebinds tables. There are two cases to consider. 1. the rebind may change the prefix from/to import 2. the import VRF may change Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I25b6af43b3b2d8f701dfbe7a08710dc56b3f5778
2021-03-20tests: add support for worker awarenessKlement Sekera1-1/+1
VppTestCase now has vpp_worker_count property set to number of workers. This can be overriden by child classes. Also overriden by VPP_WORKER_CONFIG variable for legacy reasons. Type: improvement Change-Id: Ic328bacb9003ddf9e92815767653bd362aa7f086 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2021-02-15ip: Path MTUNeale Ranns1-1/+169
Type: feature Support setting the MTU for a peer on an interface. The minimum value of the path and interface MTU is used at forwarding time. the path MTU is specified for a given peer, by address and table-ID. In the forwarding plane the MTU is enfored either: 1 - if the peer is attached, then the MTU is set on the peer's adjacency 2 - if the peer is not attached, it is remote, then a DPO is added to the peer's FIB entry to perform the necessary fragmentation. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I8b9ea6a07868b50e97e2561f18d9335407dea7ae
2021-02-15tests: test punt policer bound to worker threadBrian Russell1-2/+45
Add to the IP[46] punt policer handoff tests by binding the policer to a particular worker and checking all packets are policed on that thread. Type: test Signed-off-by: Brian Russell <brian@graphiant.com> Change-Id: I7fab28659ccb65f13f841cec65a3f808281b3f90
2021-02-11tests: tag the tests that do not work with multi-worker configurationAndrew Yourtchenko1-0/+2
If the multi-worker default VPP configuration is triggered by setting VPP_WORKER_CONFIG="workers 2", some of the tests fail for various reasons. It's a substantial number, so this change marks all of the testsets that have this issue, such that they can be addressed later independently. Type: test Change-Id: I4f77196499edef3300afe7eabef9cbff91f794d3 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2021-02-02tests: verify policer stats in punt testsBrian Russell1-0/+26
Add verification of policer stats in the IP[46] punt paths. Type: test Signed-off-by: Brian Russell <brian@graphiant.com> Change-Id: I8b1035afc2d3abe4e98bdb3a76e87a0dd131ef4b
2021-01-28tests: add ip4 punt policer handoff testBrian Russell1-1/+51
Add a test for ip4 punt policer thread handoff. A child class is created that uses common punt test setup but is configured to have 2 worker threads. Type: test Signed-off-by: Brian Russell <brian@graphiant.com> Change-Id: I34defee85bc5636f9355d0b9aaa007bfaf5e001e
2021-01-28tests: move ip4 punt setup to its own classBrian Russell1-28/+29
Move interface and packet setup for the ip4 punt test to its own class so that child classes can be created that use it. Type: test Signed-off-by: Brian Russell <brian@graphiant.com> Change-Id: I1a976e8fc0e8a44a86fe923a3ae093fe0c9057a8
2021-01-28ip: Router ID included in flow hashNeale Ranns1-14/+35
Type: feature A device/router needs to have a unique ID which is included in the flow has so that flows are not polarised through the network, i.e. each deice in the network chooses the same nth link for the same flow. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I963e03674adbb085902b4084fdc4886b88f5734c
2021-01-21ip: use IPv6 flowlabel in flow hash computationAhmed Abdelsalam1-2/+11
extends ip6_compute_flow_hash() to include IPv6 flowlabel in flowhash computation Type: improvement Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com> Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: Id1aaa20c9dac729c22b714eea1cdd6e9e4d1f75e
2020-12-01tests: remove ip_punt from vpp_papi_provider and add ip_punt object modelsJakub Grajciar1-29/+24
Type: refactor Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I1bf53c2554e6b313467f618717698ed158db9065 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2020-11-26fib: Only track cover if activatedNeale Ranns1-5/+9
Type: fix also cleanup any tracking at delete Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Id1037920c88c63e2029384af931064c00ed497aa
2020-10-21ip: convert u32 entry_flags to vl_api_mfib_entry_flags_t on mroute APINeale Ranns1-9/+14
Type: fix This is not an API change, it's the same values, just a different named type. also use VppEnum values in tests Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I3a18b529514f3cc9467ae4e8ac3e88d067fc776b
2020-05-14ip: fix interface ip address del sw_if_index checkyedg1-0/+18
Type: fix Signed-off-by: Ye donggang <yedg@wangsu.com> Change-Id: Ia9f72ff2be455ecd4ff3d16e884c5a50f9df69fe
2020-05-05api: ip: add IP_ROUTE_LOOKUP APIChristian Hopps1-0/+74
Add an IP_ROUTE_LOOKUP function that does either an exact match or longest prefix match in a given fib table for a given prefix returning the match if present. Add API test. Type: improvement Signed-off-by: Christian Hopps <chopps@labn.net> Change-ID: I67ec5a61079f4acf1349a9c646185f91f5f11806
2020-04-23ip: Replace Sematics for Interface IP addressesNeale Ranns1-0/+162
Type: feature - replace functions for prefixes attached to interfaces - add ip_interface.[ch] to consoldate the functions Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I9c0c39c09dbf80ea1aadefee02c9bd16f094b6ad
2020-03-17fib: Always install all routers mcast addressesNeale Ranns1-1/+1
Type: improvement Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ia8dff15855a81cf29729bdaa3ff28fbe3254fa97
2020-03-12policer: API cleanupJakub Grajciar1-4/+4
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: Ia14f33992353b419b70b55beed63ab8ed6a2e837 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-12-17ip: Protocol Independent IP NeighborsNeale Ranns1-1/+1
Type: feature - ip-neighbour: generic neighbour handling; APIs, DBs, event handling, aging - arp: ARP protocol implementation - ip6-nd; IPv6 neighbor discovery implementation; separate ND, MLD, RA - ip6-link; manage link-local addresses - l2-arp-term; events separated from IP neighbours, since they are not the same. vnet retains just enough education to perform ND/ARP packet construction. arp and ip6-nd to be moved to plugins soon. Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-26fib: Fix crash on cover update to non activated adj sourceNeale Ranns1-0/+64
if the adj source is not active then there is no existing cover during a cover update Type: fix Ticket: VPP-1803 Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ie912f1c99345de4fb012bdcd97b443098d4a7351
2019-11-26fib: Table ReplaceNeale Ranns1-1/+131
Type: feature from the API doc, a table replace is: " The use-case is that, for some unspecified reason, the control plane has a very different set of entries it wants in the table than VPP currently has. The CP would thus like to 'replace' VPP's current table only by specifying what the new set of entries shall be, i.e. it is not going to delete anything that already eixts. the CP delcartes the start of this procedure with this begin_replace API Call, and when it has populated all the entries it wants, it calls the below end_replace API. From this point on it is of coursce free to add and delete entries as usual. The underlying mechanism by which VPP implements this replace is purposefully left unspecified. " In the FIB, the algorithm is implemented using mark and sweep. Algorithm goes: 1) replace_begin: this marks all the entries in that table as 'stale' 2) download all the entries that should be in this table - this clears the stale flag on those entries 3) signal the table converged: ip_table_replace_end - this removes all entries that are still stale this procedure can be used when an agent first connects to VPP, as an alternative to dump and diff state reconciliation. Change-Id: I168edec10cf7670866076b129ebfe6149ea8222e Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-15tests: Remove the unrequired VPP IP address/prefix class wrappersNeale Ranns1-18/+20
Type: refactor Change-Id: I204f3f8eebc5f5d5a377e91262f91c615fd00168 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-05misc: Fix python scripts shebang lineRenato Botelho do Couto1-1/+1
Type: fix Since CentOS 8, RPM build script doesn't accept '#!/usr/bin/env python' as a valid shebang line. It requires scripts to explicitly chose between python2 or python3. Change all to use python3 as suggested by Paul Vinciguerra. Depends-On: https://gerrit.fd.io/r/23170 Signed-off-by: Renato Botelho do Couto <renato@netgate.com> Change-Id: Ie72af9f60fd0609e07f05b70f8d96e738b2754d1
2019-11-05ip: Fragmentation fixesNeale Ranns1-0/+11
Type: fix if the packet is about to be fragmented, then don't call any of the actions that expect the rewrite to have been written. 1) don't double count packets thru the adjacency (original & fragments) 2) don't double decrement the TTL for fragments 3) return to ip4-midchain post ip-frag if that's where we started. 4) only run midchain/mcast fixups if not fragmenting (if no errors) Change-Id: Ib2866787a42713ee5871b87b597d8f74b901044b Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-10-21ip: test support python3Ole Troan1-33/+33
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I9c66bce900f78e5fbd435515df94e327ad25c3c6
2019-10-16tests: cli wrapper should return stringOle Troan1-3/+3
Python3 fixes. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I648b2142d45dfab9146a02eeb1b12de11103ff9f Signed-off-by: Ole Troan <ot@cisco.com>
2019-08-20api: Cleanup APIs interface.apiJakub Grajciar1-8/+11
Use of consistent API types for interface.api Type: fix Change-Id: I88206d7d0907cffd564031f73c9a996df2e5e21a Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-08-12ip: allow addrs from the same prefix on intfMatthew Smith1-6/+59
Type: feature Adding a prefix to an interface was not permitted if it overlapped with another prefix on an interface which used the same FIB. Loosen the restriction. Allow 2 or more addresses from the same prefix on a single interface. Reference count the prefix to figure out when a glean/connected route for the prefix needs to be added or removed. Added unit tests to check that the route is only removed when all addresses in the prefix are removed from the interface. Change-Id: I1a962ecb5e1ee65fc6d41f98a4cc097a51a55321 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-07-19ip: admin change affects intf IPv4 addr routesMatthew G Smith1-0/+74
Type: feature When admin status is changed on an interface, add or delete the routes for the IPv4 addresses configured on that interface. This is already being done for IPv6 interface addresses. Change-Id: Ib1e7dc49c499921dd287e075640243520ffa5589 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-06-18fib: fib api updatesNeale Ranns1-132/+69
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-04punt: fix the set_punt API/CLI which was rejecting valid portsNeale Ranns1-1/+20
add a UT for the API Change-Id: I93fb6ec2c5f74b991bf7f229250a30c0395b8e24 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-16tests: refactor. Replace literal constant w/ named constant.Paul Vinciguerra1-19/+21
* change literal packet count vlaues from 65 to a named constant of 67. (This value was recommended to exercise single, dual, and quad loops) Change-Id: Ieb1738dddacb8b6ea7fa25883032ac01a98399e1 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-04-11Tests: Refactor tearDown show command logging, add lifecycle markers.Paul Vinciguerra1-3/+4
This change adds a consistent interface for adding test-specific show commands to log.txt. It also adds log markers for the execution of setUp[Class], tearDown[Class] in the logs. Change-Id: I7d42e396e594a59e866a7d55dac0af25548e657a Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-04-10Tests Cleanup: Fix missing calls to setUpClass/tearDownClass.Paul Vinciguerra1-0/+104
Continuation/Part 2 of https://gerrit.fd.io/r/#/c/17092/ Change-Id: Id0122d84eaf2c05d29e5be63a594d5e528ee7c9a Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-28Typos. A bunch of typos I've been collecting.Paul Vinciguerra1-4/+4
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-15Revert "API: Cleanup APIs interface.api"Ole Trøan1-11/+8
This reverts commit e63325e3ca03c847963863446345e6c80a2c0cfd. Allow time for CSIT to accommodate. Change-Id: I59435e4ab5e05e36a2796c3bf44889b5d4823cc2 Signed-off-by: ot@cisco.com
2019-03-15API: Cleanup APIs interface.apiJakub Grajciar1-8/+11
Use of consistent API types for interface.api Change-Id: Ieb54cebb4ac96b432a3f0b41596718aa2f34885b Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-03-14TEST: link-state up/down notifications on FIB forwardingNeale Ranns1-1/+82
Change-Id: I478c4e5feb9603b7443efdf2967f98f9bde7ea0f Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-11vpp_papi_provider: Remove more wrapper functions.Ole Troan1-8/+12
Split this work up into pieces. Please don't add new wrappers to vpp_papi_provider.py. Change-Id: I0f8f2afc4cd2bba07ea70ddecea2d7319f7b2e10 Signed-off-by: Ole Troan <ot@cisco.com>
2019-03-11VPP-1508: Tests: Fix vpp_api struct.error under py3.Paul Vinciguerra1-2/+2
Fix struct.error: expected bytes object got <class 'str'> Change-Id: I837ae6e97e44c789a9372677151b157956525334 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-11VPP-1508: Use scapy.compat to manage packet level library differences.Paul Vinciguerra1-2/+3
Change-Id: Icdf6abc9e53d33b26fd1d531c7dda6be0bb9cb55 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-07Tests: Refactor payload_to_info()Paul Vinciguerra1-3/+3
All callers of payload_to_info were required to wrap payload with str(). Refactor to call scapy's payload.load for raw payloads or specify the specific fieldname. Change-Id: I1c80599d4df8dc129dbb8274733afaad406d5bcf Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-07VPP-1508: Python3 tests. Explicitly specify string formatting.Paul Vinciguerra1-2/+2
.format() doesn't understand what to do with binary values by default. Specify that we expect coersion to string. Change-Id: Ic4b697f70852124dc85ab231f76b7934d0d71f4d Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-06test framework: vpp_papi_provider.py - further cleanupOle Troan1-14/+12
Part of further cleanups of this file. Removed most wrappers that don't have conflicting signature with message API. Change-Id: I6acd93d20291feb7731eb35ab2eb8c9f22f4632c Signed-off-by: Ole Troan <ot@cisco.com>
2018-12-17Fix TestIPv4FibCrud interdependencies.Paul Vinciguerra1-0/+14
The tests fail if run independently or out of order. This change breaks the dependency between the tests. ERROR: Add 1k routes ------------------------------------------------------------------------------ Traceback (most recent call last): File "/vpp/test/test_ip4.py", line 514, in test_3_add_new_routes self.deleted_routes.remove(x) ValueError: list.remove(x): x not in list Change-Id: I344ceba6bd8b86556f92e50080be6c43092b9faf Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-12-12PAPI: Allow ipaddress object as argument and return values from API callsOle Troan1-6/+6
The API calls that use any of vl_api_address_t, vl_api_ip4_address, vl_api_ip6_address_t, vl_api_prefix_t, vl_api_ip4_prefix_t, vl_api_ip6_prefix_t now accepts either the old style dictionary, a text string (2001:db8::/32) or an ipaddress ojbect. Unless it is called with '_no_type_conversion':True, it will also return an appropriate ipaddress object. Change-Id: I84e4a1577bd57f6b5ae725f316a523988b6a955b Signed-off-by: Ole Troan <ot@cisco.com>
2018-12-10IP-local: any IP can appear as the source (VPP-1522)Neale Ranns1-0/+19
Change-Id: Ib0d9b533d72c899b77c9a7bd1daa9b4a55b7221c Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-12-06API: Change ip4_address and ip6_address to use type alias.Ole Troan1-1/+1
Change-Id: Id8669bbadd1d6b2054865a310a654e9b38d1667d Signed-off-by: Ole Troan <ot@cisco.com>
2018-12-05VPP-1508 python3 tests: xrangePaul Vinciguerra1-11/+13
xrange is not supported. Use six.range. py27 runtests: commands[5] | stestr --test-path ./test run --slowest test_ip4 test_ip6 ============================================================================== IPv4 disabled ============================================================================== ============================================================================== ICMP Echo Test Case ============================================================================== {0} test.test_ip4.TestIPDisabled.test_ip_disabled [5.256819s] ... ok 07:24:41,902 Couldn't stat : /tmp/vpp-unittest-TestICMPEcho-hU4IsB/stats.sock {1} test.test_ip4.TestICMPEcho.test_icmp_echo [0.367035s] ... ok ============================================================================== IPv4 Deaggregate Routes ============================================================================== ============================================================================== IPv4 Input Exceptions ============================================================================== 07:24:47,314 Couldn't stat : /tmp/vpp-unittest-TestIPDeag-eE1VgC/stats.sock {1} test.test_ip4.TestIPDeag.test_ip_deag [5.895646s] ... ok {0} test.test_ip4.TestIPInput.test_ip_input [5.819001s] ... ok ============================================================================== IPv4 longest Prefix Match ... output truncated ... ============================== Failed 4 tests - output below: ============================== test.test_ip4.TestIPv4FibCrud.test_3_add_new_routes --------------------------------------------------- Captured traceback: ~~~~~~~~~~~~~~~~~~ Traceback (most recent call last): File "/vpp/test/test_ip4.py", line 509, in test_3_add_new_routes self.deleted_routes.remove(x) ValueError: list.remove(x): x not in list test.test_ip4.TestIPv4FibCrud.test_2_del_routes ----------------------------------------------- Captured traceback: ~~~~~~~~~~~~~~~~~~ Traceback (most recent call last): File "/vpp/test/test_ip4.py", line 478, in test_2_del_routes self.configured_routes.remove(x) ValueError: list.remove(x): x not in list test.test_ip4_vrf_multi_instance.TestIp4VrfMultiInst.test_ip4_vrf_03 -------------------------------------------------------------------- Captured traceback: ~~~~~~~~~~~~~~~~~~ Traceback (most recent call last): File "/vpp/test/test_ip4_vrf_multi_instance.py", line 465, in test_ip4_vrf_03 self.create_vrf_and_assign_interfaces(1) File "/vpp/test/test_ip4_vrf_multi_instance.py", line 189, in create_vrf_and_assign_interfaces pg_if.set_table_ip4(vrf_id) File "/vpp/test/vpp_interface.py", line 322, in set_table_ip4 self.sw_if_index, 0, self.ip4_table_id) File "/vpp/test/vpp_papi_provider.py", line 264, in sw_interface_set_table 'vrf_id': table_id}) File "/vpp/test/vpp_papi_provider.py", line 196, in api raise UnexpectedApiReturnValueError(msg) test.vpp_papi_provider.UnexpectedApiReturnValueError: API call failed, expected 0 return value instead of -114 in sw_interface_set_table_reply(_0=91, context=1007, retval=-114) test.test_ip4_vrf_multi_instance.TestIp4VrfMultiInst.test_ip4_vrf_02 -------------------------------------------------------------------- Captured traceback: ~~~~~~~~~~~~~~~~~~ Traceback (most recent call last): File "/vpp/test/test_ip4_vrf_multi_instance.py", line 445, in test_ip4_vrf_02 self.reset_vrf_and_remove_from_vrf_list(1) File "/vpp/test/test_ip4_vrf_multi_instance.py", line 208, in reset_vrf_and_remove_from_vrf_list self.vapi.reset_fib(vrf_id, is_ipv6=0) File "/vpp/test/vpp_papi_provider.py", line 1137, in reset_fib 'is_ipv6': is_ipv6, File "/vpp/test/vpp_papi_provider.py", line 196, in api raise UnexpectedApiReturnValueError(msg) test.vpp_papi_provider.UnexpectedApiReturnValueError: API call failed, expected 0 return value instead of -3 in reset_fib_reply(_0=259, context=1198, retval=-3) ====== Totals ====== Ran: 57 tests in 266.0000 sec. - Passed: 53 - Skipped: 0 - Expected Fail: 0 - Unexpected Success: 0 - Failed: 4 Sum of execute time for each test: 157.3925 sec. ============== Worker Balance ============== - Worker 0 (29 tests) => 0:03:52.608995 - Worker 1 (28 tests) => 0:04:08.615473 Test id Runtime (s) --------------------------------------------- ----------- test.test_ip_mcast.TestIPMcast.test_ip6_mcast 8.535 test.test_ip4.TestIPPunt.test_ip_punt 8.082 test.test_ip6.TestIP6Punt.test_ip_punt 6.582 test.test_ip6.TestIPDeag.test_ip_deag 6.175 test.test_ip6.TestIPv6.test_ns 6.171 test.test_ip4.TestIPDeag.test_ip_deag 5.896 test.test_ip6.TestIPv6.test_fib 5.846 test.test_ip4.TestIPInput.test_ip_input 5.819 test.test_ip6.TestIPv6.test_rs 5.737 test.test_ip4.TestIPv4.test_fib 5.267 ERROR: InvocationError for command '/vpp/.tox/py27/bin/stestr --test-path ./test run --slowest test_ip4 test_ip6' (exited with code 1) ______________________________________________________ summary ______________________________________________________ ERROR: py27: commands failed Change-Id: Id9f6ecb4897386f790d82ab908963e4971a3aac8 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-11-29VPP-1507: Added binary api to dump configured ip_punt_redirectPavel Kotucek1-4/+37
Change-Id: I790f7785e183cc9aaffd5b593617c4e12a32e20d Signed-off-by: Pavel Kotucek <pavel.kotucek@pantheon.tech>