summaryrefslogtreecommitdiffstats
path: root/test/test_ip4.py
AgeCommit message (Collapse)AuthorFilesLines
2019-06-18fib: fib api updatesNeale Ranns1-132/+69
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-04punt: fix the set_punt API/CLI which was rejecting valid portsNeale Ranns1-1/+20
add a UT for the API Change-Id: I93fb6ec2c5f74b991bf7f229250a30c0395b8e24 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-16tests: refactor. Replace literal constant w/ named constant.Paul Vinciguerra1-19/+21
* change literal packet count vlaues from 65 to a named constant of 67. (This value was recommended to exercise single, dual, and quad loops) Change-Id: Ieb1738dddacb8b6ea7fa25883032ac01a98399e1 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-04-11Tests: Refactor tearDown show command logging, add lifecycle markers.Paul Vinciguerra1-3/+4
This change adds a consistent interface for adding test-specific show commands to log.txt. It also adds log markers for the execution of setUp[Class], tearDown[Class] in the logs. Change-Id: I7d42e396e594a59e866a7d55dac0af25548e657a Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-04-10Tests Cleanup: Fix missing calls to setUpClass/tearDownClass.Paul Vinciguerra1-0/+104
Continuation/Part 2 of https://gerrit.fd.io/r/#/c/17092/ Change-Id: Id0122d84eaf2c05d29e5be63a594d5e528ee7c9a Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-28Typos. A bunch of typos I've been collecting.Paul Vinciguerra1-4/+4
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-15Revert "API: Cleanup APIs interface.api"Ole Trøan1-11/+8
This reverts commit e63325e3ca03c847963863446345e6c80a2c0cfd. Allow time for CSIT to accommodate. Change-Id: I59435e4ab5e05e36a2796c3bf44889b5d4823cc2 Signed-off-by: ot@cisco.com
2019-03-15API: Cleanup APIs interface.apiJakub Grajciar1-8/+11
Use of consistent API types for interface.api Change-Id: Ieb54cebb4ac96b432a3f0b41596718aa2f34885b Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-03-14TEST: link-state up/down notifications on FIB forwardingNeale Ranns1-1/+82
Change-Id: I478c4e5feb9603b7443efdf2967f98f9bde7ea0f Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-11vpp_papi_provider: Remove more wrapper functions.Ole Troan1-8/+12
Split this work up into pieces. Please don't add new wrappers to vpp_papi_provider.py. Change-Id: I0f8f2afc4cd2bba07ea70ddecea2d7319f7b2e10 Signed-off-by: Ole Troan <ot@cisco.com>
2019-03-11VPP-1508: Tests: Fix vpp_api struct.error under py3.Paul Vinciguerra1-2/+2
Fix struct.error: expected bytes object got <class 'str'> Change-Id: I837ae6e97e44c789a9372677151b157956525334 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-11VPP-1508: Use scapy.compat to manage packet level library differences.Paul Vinciguerra1-2/+3
Change-Id: Icdf6abc9e53d33b26fd1d531c7dda6be0bb9cb55 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-07Tests: Refactor payload_to_info()Paul Vinciguerra1-3/+3
All callers of payload_to_info were required to wrap payload with str(). Refactor to call scapy's payload.load for raw payloads or specify the specific fieldname. Change-Id: I1c80599d4df8dc129dbb8274733afaad406d5bcf Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-07VPP-1508: Python3 tests. Explicitly specify string formatting.Paul Vinciguerra1-2/+2
.format() doesn't understand what to do with binary values by default. Specify that we expect coersion to string. Change-Id: Ic4b697f70852124dc85ab231f76b7934d0d71f4d Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-06test framework: vpp_papi_provider.py - further cleanupOle Troan1-14/+12
Part of further cleanups of this file. Removed most wrappers that don't have conflicting signature with message API. Change-Id: I6acd93d20291feb7731eb35ab2eb8c9f22f4632c Signed-off-by: Ole Troan <ot@cisco.com>
2018-12-17Fix TestIPv4FibCrud interdependencies.Paul Vinciguerra1-0/+14
The tests fail if run independently or out of order. This change breaks the dependency between the tests. ERROR: Add 1k routes ------------------------------------------------------------------------------ Traceback (most recent call last): File "/vpp/test/test_ip4.py", line 514, in test_3_add_new_routes self.deleted_routes.remove(x) ValueError: list.remove(x): x not in list Change-Id: I344ceba6bd8b86556f92e50080be6c43092b9faf Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-12-12PAPI: Allow ipaddress object as argument and return values from API callsOle Troan1-6/+6
The API calls that use any of vl_api_address_t, vl_api_ip4_address, vl_api_ip6_address_t, vl_api_prefix_t, vl_api_ip4_prefix_t, vl_api_ip6_prefix_t now accepts either the old style dictionary, a text string (2001:db8::/32) or an ipaddress ojbect. Unless it is called with '_no_type_conversion':True, it will also return an appropriate ipaddress object. Change-Id: I84e4a1577bd57f6b5ae725f316a523988b6a955b Signed-off-by: Ole Troan <ot@cisco.com>
2018-12-10IP-local: any IP can appear as the source (VPP-1522)Neale Ranns1-0/+19
Change-Id: Ib0d9b533d72c899b77c9a7bd1daa9b4a55b7221c Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-12-06API: Change ip4_address and ip6_address to use type alias.Ole Troan1-1/+1
Change-Id: Id8669bbadd1d6b2054865a310a654e9b38d1667d Signed-off-by: Ole Troan <ot@cisco.com>
2018-12-05VPP-1508 python3 tests: xrangePaul Vinciguerra1-11/+13
xrange is not supported. Use six.range. py27 runtests: commands[5] | stestr --test-path ./test run --slowest test_ip4 test_ip6 ============================================================================== IPv4 disabled ============================================================================== ============================================================================== ICMP Echo Test Case ============================================================================== {0} test.test_ip4.TestIPDisabled.test_ip_disabled [5.256819s] ... ok 07:24:41,902 Couldn't stat : /tmp/vpp-unittest-TestICMPEcho-hU4IsB/stats.sock {1} test.test_ip4.TestICMPEcho.test_icmp_echo [0.367035s] ... ok ============================================================================== IPv4 Deaggregate Routes ============================================================================== ============================================================================== IPv4 Input Exceptions ============================================================================== 07:24:47,314 Couldn't stat : /tmp/vpp-unittest-TestIPDeag-eE1VgC/stats.sock {1} test.test_ip4.TestIPDeag.test_ip_deag [5.895646s] ... ok {0} test.test_ip4.TestIPInput.test_ip_input [5.819001s] ... ok ============================================================================== IPv4 longest Prefix Match ... output truncated ... ============================== Failed 4 tests - output below: ============================== test.test_ip4.TestIPv4FibCrud.test_3_add_new_routes --------------------------------------------------- Captured traceback: ~~~~~~~~~~~~~~~~~~ Traceback (most recent call last): File "/vpp/test/test_ip4.py", line 509, in test_3_add_new_routes self.deleted_routes.remove(x) ValueError: list.remove(x): x not in list test.test_ip4.TestIPv4FibCrud.test_2_del_routes ----------------------------------------------- Captured traceback: ~~~~~~~~~~~~~~~~~~ Traceback (most recent call last): File "/vpp/test/test_ip4.py", line 478, in test_2_del_routes self.configured_routes.remove(x) ValueError: list.remove(x): x not in list test.test_ip4_vrf_multi_instance.TestIp4VrfMultiInst.test_ip4_vrf_03 -------------------------------------------------------------------- Captured traceback: ~~~~~~~~~~~~~~~~~~ Traceback (most recent call last): File "/vpp/test/test_ip4_vrf_multi_instance.py", line 465, in test_ip4_vrf_03 self.create_vrf_and_assign_interfaces(1) File "/vpp/test/test_ip4_vrf_multi_instance.py", line 189, in create_vrf_and_assign_interfaces pg_if.set_table_ip4(vrf_id) File "/vpp/test/vpp_interface.py", line 322, in set_table_ip4 self.sw_if_index, 0, self.ip4_table_id) File "/vpp/test/vpp_papi_provider.py", line 264, in sw_interface_set_table 'vrf_id': table_id}) File "/vpp/test/vpp_papi_provider.py", line 196, in api raise UnexpectedApiReturnValueError(msg) test.vpp_papi_provider.UnexpectedApiReturnValueError: API call failed, expected 0 return value instead of -114 in sw_interface_set_table_reply(_0=91, context=1007, retval=-114) test.test_ip4_vrf_multi_instance.TestIp4VrfMultiInst.test_ip4_vrf_02 -------------------------------------------------------------------- Captured traceback: ~~~~~~~~~~~~~~~~~~ Traceback (most recent call last): File "/vpp/test/test_ip4_vrf_multi_instance.py", line 445, in test_ip4_vrf_02 self.reset_vrf_and_remove_from_vrf_list(1) File "/vpp/test/test_ip4_vrf_multi_instance.py", line 208, in reset_vrf_and_remove_from_vrf_list self.vapi.reset_fib(vrf_id, is_ipv6=0) File "/vpp/test/vpp_papi_provider.py", line 1137, in reset_fib 'is_ipv6': is_ipv6, File "/vpp/test/vpp_papi_provider.py", line 196, in api raise UnexpectedApiReturnValueError(msg) test.vpp_papi_provider.UnexpectedApiReturnValueError: API call failed, expected 0 return value instead of -3 in reset_fib_reply(_0=259, context=1198, retval=-3) ====== Totals ====== Ran: 57 tests in 266.0000 sec. - Passed: 53 - Skipped: 0 - Expected Fail: 0 - Unexpected Success: 0 - Failed: 4 Sum of execute time for each test: 157.3925 sec. ============== Worker Balance ============== - Worker 0 (29 tests) => 0:03:52.608995 - Worker 1 (28 tests) => 0:04:08.615473 Test id Runtime (s) --------------------------------------------- ----------- test.test_ip_mcast.TestIPMcast.test_ip6_mcast 8.535 test.test_ip4.TestIPPunt.test_ip_punt 8.082 test.test_ip6.TestIP6Punt.test_ip_punt 6.582 test.test_ip6.TestIPDeag.test_ip_deag 6.175 test.test_ip6.TestIPv6.test_ns 6.171 test.test_ip4.TestIPDeag.test_ip_deag 5.896 test.test_ip6.TestIPv6.test_fib 5.846 test.test_ip4.TestIPInput.test_ip_input 5.819 test.test_ip6.TestIPv6.test_rs 5.737 test.test_ip4.TestIPv4.test_fib 5.267 ERROR: InvocationError for command '/vpp/.tox/py27/bin/stestr --test-path ./test run --slowest test_ip4 test_ip6' (exited with code 1) ______________________________________________________ summary ______________________________________________________ ERROR: py27: commands failed Change-Id: Id9f6ecb4897386f790d82ab908963e4971a3aac8 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-11-29VPP-1507: Added binary api to dump configured ip_punt_redirectPavel Kotucek1-4/+37
Change-Id: I790f7785e183cc9aaffd5b593617c4e12a32e20d Signed-off-by: Pavel Kotucek <pavel.kotucek@pantheon.tech>
2018-11-27VPP-1508 python3 tests: .encode('hex')Paul Vinciguerra1-6/+5
Change to binascii.hexlify() for consistent bahavior. Change-Id: Ie430cdd1ffeb6510db4aa037546e42d85992093b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-11-26Python3 tests: Fix asserts.Paul Vinciguerra1-2/+2
Use assert(Not)Equal() Use assert{Greater,Less}[Equal] Change-Id: I7c14570b8dce463ee13a67e9c1f10beb1a0308a8 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-10-22Fix buffer overflow when fragmenting packets (VPP-1383)Juraj Sloboda1-0/+50
Change-Id: Idcda9ae55fa2efb0b2e928bac3e8e86ff8d19eba Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-10-15VPP-1448: Fix error when recurse on down the trie.mu.duojiao1-0/+49
Change-Id: Idfed8243643780d3f52dfe6e6ec621c440daa6ae Signed-off-by: mu.duojiao <mu.duojiao@zte.com.cn>
2018-09-07IP route update fix when multipath and drop setNeale Ranns1-1/+27
Change-Id: I9cec7486cb6e3c5261d74d2b15a4d19469285a30 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-08-03loop counter to prevent infiinte number of look ups per-packetNeale Ranns1-0/+18
Change-Id: I59235d11baac18785a4c90cdaf14e8f3ddf06dab Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-07-20IP directed broadcastNeale Ranns1-0/+69
with ip direct broadcast enable a packet to the interface's subnet broadcast address with be sent L2 broadcast on the interface. dissabled, it will be dropped. it is disabled by default, which preserves current behaviour Change-Id: If154cb92e64834e97a541b32624354348a0eafb3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-02make_test: add icmp packet size sweep and icmp echo testsJan Gelety1-24/+100
Jira: CSIT-1141 Change-Id: I162bb4e718bff188abefc7b2f33501de9c55bb03 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2018-06-11MTU: Software interface / Per-protocol MTU supportOle Troan1-2/+4
This patch separates setting of hardware interfaec and software interface MTU. Software MTU is L2 payload MTU (i.e. not including L2 header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set. Currently only IP4, IP6 are enabled in adjacency / rewrite code. Documentation in src/vnet/MTU.md Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690 Signed-off-by: Ole Troan <ot@cisco.com>
2018-05-23VPP-1283: IPv4 PMTU missing MTU value in ICMP4 message.Ole Troan1-1/+1
Change-Id: I7a4133c59ff45b0744b48e246a049d9f015026fc Signed-off-by: Ole Troan <ot@cisco.com>
2018-04-13Revert "MTU: Setting of MTU on software interface (instead of hardware ↵Damjan Marion1-1/+1
interface)" This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa. Reverting as this patch is causing following crash: 0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails Aborted Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-13MTU: Setting of MTU on software interface (instead of hardware interface)Ole Troan1-1/+1
Change-Id: I98bd454a761a1032738a21edeb0fe847e801f901 Signed-off-by: Ole Troan <ot@cisco.com>
2018-02-12Improve MTU handlingNeale Ranns1-0/+26
- setting MTU on an interface updates the L3 max bytes too - value cached in the adjacency is also updated - MTU exceeded generates ICMP to sender Change-Id: I343ec71d8e903b529594c4bd0543f04bc7f370b3 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-01-09test: consolidate the multiple versions of send_and_*Neale Ranns1-73/+0
Change-Id: I7fa7d0ebf73dab8264a2e5ddbd412600d78ead05 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-11MPLS disposition actions at the tail of unicast LSPsNeale Ranns1-1/+0
Change-Id: I8c42e26152f2ed1246f91b789887bfc923418bdf Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-31Refactor IP input checks for re-use at MPLS dispositionNeale Ranns1-0/+135
Change-Id: I7aafdecd6f370411138e6ab67b2ff72cda6e0666 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-14Source Lookup progammable via APINeale Ranns1-1/+109
Change-Id: I5d5d4f22b6369d504455a644f73076d772fbcfb4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-10punt and drop features:Neale Ranns1-1/+111
- new IPv4 and IPv6 feature arcs on the punt and drop nodes - new features: - redirect punted traffic to an interface and nexthop - police punted traffic. Change-Id: I53be8bf4e06545add8a3619e462de5ffedd0a95c Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-11FIB table add/delete APINeale Ranns1-3/+8
part 2; - this adds the code to create an IP and MPLS table via the API. - but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass. Change-Id: Id124d884ade6cb7da947225200e3bb193454c555 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-01Tests for recursive load-balancing with no choices.Neale Ranns1-5/+35
Change-Id: I90bb3369576741d03628a818ffa63cc99d6e4c98 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-06-06Packets recieved on VLAN-0 map to the main interfaceNeale Ranns1-0/+46
Change-Id: I21b1ad39275495d4d006023b58f630a213445854 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-25MPLS hash function improvementsNeale Ranns1-18/+43
Change-Id: I28e98f445c01493562b6196a4f5b532a51f178af Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-26IP Flow Hash Config fixesNeale Ranns1-0/+137
- the flow hash config is (and was) cached on the load-balance object so the fib_table_t struct is not used a switch time. Therefore changes to the table's flow hash config need to be propagated to all load-balances and hance all FIB entries in the table. - enable API for setting the IPv6 table flow hash config - use only the hash config in the fib_table_t object and not on the ipX_fib_t - add tests. Change-Id: Ib804c11162c6d4972c764957562c372f663e05d4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-29Sub-net broadcast addresses for IPv4Neale Ranns1-1/+124
Change-Id: Ib2189d01e8bc61de57404159690fb70f89c47277 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-17Fix IP feature ordering.Neale Ranns1-1/+98
Drop comes before lookup when enabled. is_first_or_last is not required when setting a feature, the anchor is added in find_config_with_features(). Don't make the PG interfaces automatically L3 enabled, this way we can have tests that check the L3 protocol disbaled behaviour. Change-Id: Icef22a920b27ff9cec6ab2da6b05f05c532cb60f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-09Tests to target holes in adjacency and DPO test coverageNeale Ranns1-1/+82
Change-Id: Ic6ac7e441a7b75baa02f03c1585d1ae00903a399 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-01-11make test: improve documentation and PEP8 complianceKlement Sekera1-7/+10
Change-Id: Ib4f0353aab6112fcc3c3d8f0bcbed5bc4b567b9b Signed-off-by: Klement Sekera <ksekera@cisco.com>
2016-12-23make test: improve handling of packet capturesKlement Sekera1-11/+8
Perform accounting of expected packets based on created packet infos. Use this accounting info to automatically expect (and verify) the correct number of packets to be captured. Automatically retry the read of the capture file if scapy raises an exception while doing so to handle rare cases when capture file is read while only partially written during busy wait. Don't fail assert_nothing_captured if only junk packets arrived. Change-Id: I16ec2e9410ef510d313ec16b7e13c57d0b2a63f5 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2016-12-09make test: FIB add/update/delete - ip4 routesMatej Klotton1-2/+266
- JIRA:CSIT-483 Change-Id: Idb4c5bd7a234bc975f3380ece58c0e8d4bfdafd9 Signed-off-by: Matej Klotton <mklotton@cisco.com>