summaryrefslogtreecommitdiffstats
path: root/test/test_ip6.py
AgeCommit message (Collapse)AuthorFilesLines
2022-02-18tests: Consolidate the implementations of send_and_expect_XNeale Ranns1-22/+3
Type: test there were multiple instances of send_and_expect_load_balancing and a send_and_expect_one_itf which has the same functionality as send_and_expect_one. Put one implementation of both in framework.py (where the other send_and_X functions reside). Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I7f629d440220bee29368067f475059322e1134f7
2021-10-04ip: fix punt for ipv6Benoît Ganne1-0/+144
Type: fix Change-Id: I583c30e9b63c0b0b6cd5fef0b2cb9ed7ec9856e2 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-08-09ip6-nd: only respond to RS if sending RA is enabledOle Troan1-1/+15
Even when periodic RAs are disabled VPP would respond to router solicitations. Making it impossible to have an IPv6 enabled interface with hosts connected to it without VPP acting as a default router. This change drops RS messages if the radv_info->send_radv is off. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I9a68f8e12c93c1c00125b54f8fd454f48fa22caa Signed-off-by: Ole Troan <ot@cisco.com>
2021-06-17tests: Tests for cross AF routingNeale Ranns1-0/+124
Type: test Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Iebee39d0974c6f458863ce6144c6a83bc3cf4cb7
2021-05-27ip: allow the 'ip6 enable' on tunnel interface typesNeale Ranns1-2/+78
Type: feature This was limited to HW interface types (for historical reason AFAICT) Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I3785a356ae31722fa60d84f64ec9aa53ebdd615f
2021-04-05ip6-nd: Solicitation reply only if target is our link-localNeale Ranns1-0/+12
Type: fix The fib source IP6_ND is used for all link-local entries, hence solicitation responses were sent for a peer's address. Constrain the source check to also in clude the LOCAL flag, which indicates that the link-local address is ours. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Iba7e66049e4d89ee3f36d77aeb09310b978d70de
2021-03-20tests: add support for worker awarenessKlement Sekera1-1/+1
VppTestCase now has vpp_worker_count property set to number of workers. This can be overriden by child classes. Also overriden by VPP_WORKER_CONFIG variable for legacy reasons. Type: improvement Change-Id: Ic328bacb9003ddf9e92815767653bd362aa7f086 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2021-03-16fib: Allow the creation of new source on the APINeale Ranns1-1/+103
Type: feature an client can dump the existing sources, examine their priorities, then define thier own source. Usefull if a client wants to distingusih between say, static, ospf, bgp, etc routes it has added over the API. Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: I5158b4fa1ebe87381ff8707bb173217f56ea274a
2021-02-15ip: Path MTUNeale Ranns1-1/+234
Type: feature Support setting the MTU for a peer on an interface. The minimum value of the path and interface MTU is used at forwarding time. the path MTU is specified for a given peer, by address and table-ID. In the forwarding plane the MTU is enfored either: 1 - if the peer is attached, then the MTU is set on the peer's adjacency 2 - if the peer is not attached, it is remote, then a DPO is added to the peer's FIB entry to perform the necessary fragmentation. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I8b9ea6a07868b50e97e2561f18d9335407dea7ae
2021-02-15tests: test punt policer bound to worker threadBrian Russell1-0/+44
Add to the IP[46] punt policer handoff tests by binding the policer to a particular worker and checking all packets are policed on that thread. Type: test Signed-off-by: Brian Russell <brian@graphiant.com> Change-Id: I7fab28659ccb65f13f841cec65a3f808281b3f90
2021-02-02tests: verify policer stats in punt testsBrian Russell1-0/+25
Add verification of policer stats in the IP[46] punt paths. Type: test Signed-off-by: Brian Russell <brian@graphiant.com> Change-Id: I8b1035afc2d3abe4e98bdb3a76e87a0dd131ef4b
2021-01-28tests: add ip6 punt policer handoff testBrian Russell1-1/+52
Add a test for ip6 punt policer thread handoff. A child class is created that uses common punt test setup but is configured to have 2 worker threads. Type: test Signed-off-by: Brian Russell <brian@graphiant.com> Change-Id: I65c44f5d79455129accd7cf405c15920a5a9b678
2021-01-28tests: move ip6 punt setup to its own classBrian Russell1-23/+24
Move interface and packet setup for the ip6 punt test to its own class so that child classes can be created that use it. Type: test Signed-off-by: Brian Russell <brian@graphiant.com> Change-Id: I14acedc1bcd12cb320835a36833cd32303c5f793
2021-01-28ip: Router ID included in flow hashNeale Ranns1-4/+22
Type: feature A device/router needs to have a unique ID which is included in the flow has so that flows are not polarised through the network, i.e. each deice in the network chooses the same nth link for the same flow. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I963e03674adbb085902b4084fdc4886b88f5734c
2021-01-22tests: add generalized tags for tests, use them for run-solo testsAndrew Yourtchenko1-5/+2
We have accumulated several scenarios in prod or wishlists where it would be useful to have a general infra to say yes/no about a certain test, and potentially make decisions based on that, for example: - runs solo (aka 'time-dependent') - (wishlist) part of quick smoke-test set - (wishlist) intermittent failure unrelated to timing - (wishlist) test broken with a multi-worker config in vpp Refactor the current "run-solo" code to allow for this extension. Type: test Change-Id: Ia5b3810e57c0543753c8e0dc4dc0cfb4a30b36ac Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> Signed-off-by: Klement Sekera <ksekera@cisco.com>
2021-01-21ip: use IPv6 flowlabel in flow hash computationAhmed Abdelsalam1-3/+3
extends ip6_compute_flow_hash() to include IPv6 flowlabel in flowhash computation Type: improvement Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com> Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: Id1aaa20c9dac729c22b714eea1cdd6e9e4d1f75e
2021-01-20ip: add IPv6 ping test for link-layer addressBenoît Ganne1-31/+27
Type: improvement Change-Id: I9f60e29462c7cb193a8594b7de06418b40573103 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-12-01tests: remove ip_punt from vpp_papi_provider and add ip_punt object modelsJakub Grajciar1-32/+26
Type: refactor Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I1bf53c2554e6b313467f618717698ed158db9065 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2020-10-21ip: convert u32 entry_flags to vl_api_mfib_entry_flags_t on mroute APINeale Ranns1-9/+14
Type: fix This is not an API change, it's the same values, just a different named type. also use VppEnum values in tests Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I3a18b529514f3cc9467ae4e8ac3e88d067fc776b
2020-08-27tests: "force solo" testcase supportAndrew Yourtchenko1-0/+4
Some of the tests are time-sensitive, and at present require a non-trivial modification in order to run at high concurrency. Without these modifications, they intermittently fail, and require the test retries. Rather than setting them to the extended tests and forgetting about them, put them into a "solo" set, which gets run in a single-threaded mode after the rest of the tests are done. Mark a few of the tests that showed errors during TEST_JOBS=48 as forced-solo. Also, give a better diagnostic if the testcase misses a docstring needed to represent it in the diagnostic outputs. Type: fix Change-Id: I33fe62eb17edc1885bd2c3523892051d52da6546 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2020-05-14ip: fix interface ip address del sw_if_index checkyedg1-0/+18
Type: fix Signed-off-by: Ye donggang <yedg@wangsu.com> Change-Id: Ia9f72ff2be455ecd4ff3d16e884c5a50f9df69fe
2020-05-05api: ip: add IP_ROUTE_LOOKUP APIChristian Hopps1-0/+74
Add an IP_ROUTE_LOOKUP function that does either an exact match or longest prefix match in a given fib table for a given prefix returning the match if present. Add API test. Type: improvement Signed-off-by: Christian Hopps <chopps@labn.net> Change-ID: I67ec5a61079f4acf1349a9c646185f91f5f11806
2020-04-24ip: Setting the Link-Local address from the API enables IPv6 on theNeale Ranns1-3/+91
interface Type: fix Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I0b7c189006e30a357cd6be4f3c9c61fded4157cb
2020-04-23ip: Replace Sematics for Interface IP addressesNeale Ranns1-0/+161
Type: feature - replace functions for prefixes attached to interfaces - add ip_interface.[ch] to consoldate the functions Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I9c0c39c09dbf80ea1aadefee02c9bd16f094b6ad
2020-04-06misc: fix python sonarcloud BLOCKER level issuesPaul Vinciguerra1-0/+1
Fix of the top 11 python issues flagged as BLOCKER. Ticket: VPP-1856 Type: fix Change-Id: Icf4691e62f4a69d6ee196b6d6e2ab52d961b5c76 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-03-17fib: Always install all routers mcast addressesNeale Ranns1-1/+1
Type: improvement Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ia8dff15855a81cf29729bdaa3ff28fbe3254fa97
2020-03-12policer: API cleanupJakub Grajciar1-4/+4
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: Ia14f33992353b419b70b55beed63ab8ed6a2e837 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2020-02-10ip-neighbor: fix MLD reports not being sentNeale Ranns1-1/+31
Type: fix Change-Id: I8f81cd6c29ff8cb4f0b4850b8b1f6611d89ddb38 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-02-07tests: support python 3.8Ole Troan1-1/+1
Make test framework python3 version independence. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I1ef1eb77b6c1f422ebc4dad0818f87c8e587b34b
2019-12-17ip: Protocol Independent IP NeighborsNeale Ranns1-18/+37
Type: feature - ip-neighbour: generic neighbour handling; APIs, DBs, event handling, aging - arp: ARP protocol implementation - ip6-nd; IPv6 neighbor discovery implementation; separate ND, MLD, RA - ip6-link; manage link-local addresses - l2-arp-term; events separated from IP neighbours, since they are not the same. vnet retains just enough education to perform ND/ARP packet construction. arp and ip6-nd to be moved to plugins soon. Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-14tests: changes for scapy 2.4.3 migrationsnaramre1-2/+1
Type: fix Change-Id: I7e041b666dabd90df23a920a1f1d99db4c10ddfe Signed-off-by: snaramre <snaramre@cisco.com>
2019-11-26fib: Table ReplaceNeale Ranns1-2/+143
Type: feature from the API doc, a table replace is: " The use-case is that, for some unspecified reason, the control plane has a very different set of entries it wants in the table than VPP currently has. The CP would thus like to 'replace' VPP's current table only by specifying what the new set of entries shall be, i.e. it is not going to delete anything that already eixts. the CP delcartes the start of this procedure with this begin_replace API Call, and when it has populated all the entries it wants, it calls the below end_replace API. From this point on it is of coursce free to add and delete entries as usual. The underlying mechanism by which VPP implements this replace is purposefully left unspecified. " In the FIB, the algorithm is implemented using mark and sweep. Algorithm goes: 1) replace_begin: this marks all the entries in that table as 'stale' 2) download all the entries that should be in this table - this clears the stale flag on those entries 3) signal the table converged: ip_table_replace_end - this removes all entries that are still stale this procedure can be used when an agent first connects to VPP, as an alternative to dump and diff state reconciliation. Change-Id: I168edec10cf7670866076b129ebfe6149ea8222e Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-15tests: Remove the unrequired VPP IP address/prefix class wrappersNeale Ranns1-10/+9
Type: refactor Change-Id: I204f3f8eebc5f5d5a377e91262f91c615fd00168 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-08tests: python3 use byte strings in raw()Ole Troan1-17/+17
Raw('\xaf) and Raw(b'\xaf) are two quite different things in python 2 versus 3. In most cases this didn't make a difference, apart from those cases where length of payload actually mattered. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I3cba5c1486e436a3ca8aa10a7b393da75aa9f6b9
2019-11-05misc: Fix python scripts shebang lineRenato Botelho do Couto1-1/+1
Type: fix Since CentOS 8, RPM build script doesn't accept '#!/usr/bin/env python' as a valid shebang line. It requires scripts to explicitly chose between python2 or python3. Change all to use python3 as suggested by Paul Vinciguerra. Depends-On: https://gerrit.fd.io/r/23170 Signed-off-by: Renato Botelho do Couto <renato@netgate.com> Change-Id: Ie72af9f60fd0609e07f05b70f8d96e738b2754d1
2019-10-28tests: make RA tests run on VPP timeAndrew Yourtchenko1-7/+7
the IPv6 RA tests take timing into the account, but the time inside VPP may go slightly differently compared to the time inside the driving python thread, if the machine running the tests is heavily loaded. Make a sleep function which sleeps "on VPP time" and use it. Change-Id: I3b34b0164f6e0ec7a619b92ee308089a4a8935e3 Type: test Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-10-16tests: python3 changes for ip6 fib testssnaramre1-1/+1
Type: fix Change-Id: Ie7764fec13cbb83b6899c7c33b7b2f8cc5d40c8a Signed-off-by: snaramre <snaramre@cisco.com>
2019-08-12ip: allow addrs from the same prefix on intfMatthew Smith1-2/+77
Type: feature Adding a prefix to an interface was not permitted if it overlapped with another prefix on an interface which used the same FIB. Loosen the restriction. Allow 2 or more addresses from the same prefix on a single interface. Reference count the prefix to figure out when a glean/connected route for the prefix needs to be added or removed. Added unit tests to check that the route is only removed when all addresses in the prefix are removed from the interface. Change-Id: I1a962ecb5e1ee65fc6d41f98a4cc097a51a55321 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-06-26api: refactor format_vl_api_prefix_t return keysPaul Vinciguerra1-20/+22
format_vl_api_prefix_t returns a dict with keys 'address' and 'address_length', but other format_vl_api_prefix functions return a dict with 'prefix', and 'len'. Refactor all format_vl_api_prefix_t to return consistent keys 'address' and 'len'. Type: refactor Change-Id: I5f9558fc2da8742a303266e011102f5b2db80aad Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-18fib: fib api updatesNeale Ranns1-109/+58
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-18ip: reassembly-separate feature and custom codeKlement Sekera1-0/+18
This change is made fix a crash, because is_feature flag semantics turn out to be different from "custom app code" semantics. Introduce a flag which custom plugins/apps can use to instead of tying that code to is_feature flag. Change-Id: Ief5898711e68529f9306cfac54c4dc9b3650f9e3 Ticket: N/A Type: fix Fixes: 21aa8f1022590b8b5caf819b4bbd485de0f1dfe5 Signed-off-by: Klement Sekera <ksekera@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com>
2019-05-28Add an ip6 local hop-by-hop protocol demux tableDave Barach1-1/+14
Add a minimal ip6 hbh header processing test. ioam plugin: use ip6_local_hop_by_hop_register_protocol() in udp_ping_init(). Please test the ioam plugin udp_ping path AYEC, so I can publish the patch. Change-Id: I74e35276d6c38c31022026cfd238fad5e4a54485 Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-16tests: refactor. Replace literal constant w/ named constant.Paul Vinciguerra1-3/+6
* change literal packet count vlaues from 65 to a named constant of 67. (This value was recommended to exercise single, dual, and quad loops) Change-Id: Ieb1738dddacb8b6ea7fa25883032ac01a98399e1 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-04-10Tests Cleanup: Fix missing calls to setUpClass/tearDownClass.Paul Vinciguerra1-0/+76
Continuation/Part 2 of https://gerrit.fd.io/r/#/c/17092/ Change-Id: Id0122d84eaf2c05d29e5be63a594d5e528ee7c9a Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-28Typos. A bunch of typos I've been collecting.Paul Vinciguerra1-15/+16
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-11vpp_papi_provider: Remove more wrapper functions.Ole Troan1-4/+8
Split this work up into pieces. Please don't add new wrappers to vpp_papi_provider.py. Change-Id: I0f8f2afc4cd2bba07ea70ddecea2d7319f7b2e10 Signed-off-by: Ole Troan <ot@cisco.com>
2019-03-11VPP-1508: Tests: Fix vpp_api struct.error under py3.Paul Vinciguerra1-3/+3
Fix struct.error: expected bytes object got <class 'str'> Change-Id: I837ae6e97e44c789a9372677151b157956525334 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-11VPP-1508: Use scapy.compat to manage packet level library differences.Paul Vinciguerra1-0/+1
Change-Id: Icdf6abc9e53d33b26fd1d531c7dda6be0bb9cb55 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-07Tests: Refactor payload_to_info()Paul Vinciguerra1-1/+1
All callers of payload_to_info were required to wrap payload with str(). Refactor to call scapy's payload.load for raw payloads or specify the specific fieldname. Change-Id: I1c80599d4df8dc129dbb8274733afaad406d5bcf Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-06test framework: vpp_papi_provider.py - further cleanupOle Troan1-10/+8
Part of further cleanups of this file. Removed most wrappers that don't have conflicting signature with message API. Change-Id: I6acd93d20291feb7731eb35ab2eb8c9f22f4632c Signed-off-by: Ole Troan <ot@cisco.com>