summaryrefslogtreecommitdiffstats
path: root/test/test_ip6.py
AgeCommit message (Collapse)AuthorFilesLines
2024-04-03tests: upgrade python packagesDave Wallace1-1/+1
Type: test Change-Id: I01500466f3d15c79e38028677ce7e5c75d427fdc Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2024-03-04fib: fix crash while adding intf-rx routesVladislav Grishenko1-0/+133
Fix crash while adding intf-rx ip4 and ip6 routes via api due invalid exporting of interface rx routes as attached. Also, add missed route path via rx-ip6 cli support. Type: fix Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru> Change-Id: I15711c8c0787398dd7e3baa4787019bb1f317666
2023-11-03tests: refactor asf framework codeDave Wallace1-5/+3
- Make framework.py classes a subset of asfframework.py classes - Remove all packet related code from asfframework.py - Add test class and test case set up debug output to log - Repatriate packet tests from asf to test directory - Remove non-packet related code from framework.py and inherit them from asfframework.py classes - Clean up unused import variables - Re-enable BFD tests on Ubuntu 22.04 and fix intermittent test failures in echo_looped_back testcases (where # control packets verified but not guaranteed to be received during test) - Re-enable Wireguard tests on Ubuntu 22.04 and fix intermittent test failures in handshake ratelimiting testcases and event testcase - Run Wiregard testcase suites solo - Improve debug output in log.txt - Increase VCL/LDP post sleep timeout to allow iperf server to finish cleanly. - Fix pcap history files to be sorted by suite and testcase and ensure order/timestamp is correct based on creation in the testcase. - Decode pcap files for each suite and testcase for all errors or if configured via comandline option / env var - Improve vpp corefile detection to allow complete corefile generation - Disable vm vpp interfaces testcases on debian11 - Clean up failed unittest dir when retrying failed testcases and unify testname directory and failed linknames into framwork functions Type: test Change-Id: I0764f79ea5bb639d278bf635ed2408d4d5220e1e Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2023-10-16ip-neighbor: do not use sas to determine NS source addressOle Troan1-1/+1
Using the source address selection algorithm to determine the best source of an NS for address resolution risks incompatible behavior. It may choose a source address that is off-link to the other host. Which may drop it. A safer approach is to always use the link-local address as the SA. It's recommended to pick a source that an application will later use, as VPP is mostly a router, that rarely applies. And regardlessly we have no mechanism to signal from an application that triggered address resolutiuon what source address it intends to use. Type: fix Change-Id: I3c5de66e41505f3682767706ef1195a20e4f0e54 Signed-off-by: Ole Troan <otroan@employees.org>
2023-08-16tests docs: update python3 venv packagesDave Wallace1-1/+0
- Package update performed by 1. updating pip, pip-tools, setuptools 2. 'make test-refresh-deps' on ubuntu 22.04 3. fixing 'make test' and 'make docs' issues on ubuntu 22.04 4. 'make test-refresh-deps' on ubuntu 20.04 - Add dependency for 'make test-refresh-deps' to insure python venv is set up. - Update of python formatter, black, caused reformating of 41 python code files. Type: make Change-Id: I7cafdf4b5189065ac57cb6b254937f6e0897a924 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2023-02-08ip6-nd: support dump/details for IPv6 RAAlexander Chernavin1-0/+79
Type: improvement With this change, add support for dumping IPv6 Router Advertisements details on a per-interface basis (or all). Also, cover that with a test. Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: I89fa93439d33cc36252377f27187b18b3d30a1d4
2022-09-30fib: fix dpo-receive address in ip6-ll fibsVladislav Grishenko1-1/+3
Need to fill frp_addr for local path, it's used by dpo-receive. If not, address output can be invalid: $ sudo vppctl sh ip6-ll fe80::dcad:ff:fe00:3/128 IP6-link-local:loop3, fib_index:2, locks:[IPv6-nd:1, ] fe80::dcad:ff:fe00:3/128 fib:2 index:55 locks:2 IPv6-nd refs:1 entry-flags:connected,import,local, src-flags:added,contributing,active, path-list:[72] locks:2 flags:shared,local, uPRF-list:58 len:0 itfs:[] path:[82] pl-index:72 ip6 weight=1 pref=0 receive: oper-flags:resolved, cfg-flags:local,glean, [@0]: dpo-receive: 8000:100:fe80::dcad:ff on loop3 forwarding: unicast-ip6-chain [@0]: dpo-load-balance: [proto:ip6 index:57 buckets:1 uRPF:58 to:[0:0]] [0] [@2]: dpo-receive: 8000:100:fe80::dcad:ff on loop3 Type: fix Change-Id: Ib9874c5eac74af789e721098d512a1058cb8e404 Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
2022-08-09ip-neighbor: ARP and ND stats per-interface.Neale Ranns1-0/+54
Type: feature stats of the like from: https://datatracker.ietf.org/doc/html/draft-ietf-rtgwg-arp-yang-model-03#section-4 Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Icb1bf4f6f7e6ccc2f44b0008d4774b61cae96184
2022-05-10tests: replace pycodestyle with blackKlement Sekera1-1065/+1286
Drop pycodestyle for code style checking in favor of black. Black is much faster, stable PEP8 compliant code style checker offering also automatic formatting. It aims to be very stable and produce smallest diffs. It's used by many small and big projects. Running checkstyle with black takes a few seconds with a terse output. Thus, test-checkstyle-diff is no longer necessary. Expand scope of checkstyle to all python files in the repo, replacing test-checkstyle with checkstyle-python. Also, fixstyle-python is now available for automatic style formatting. Note: python virtualenv has been consolidated in test/Makefile, test/requirements*.txt which will eventually be moved to a central location. This is required to simply the automated generation of docker executor images in the CI. Type: improvement Change-Id: I022a326603485f58585e879ac0f697fceefbc9c8 Signed-off-by: Klement Sekera <klement.sekera@gmail.com> Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2022-03-24ip6-nd: stop sending RA by defaultAlexander Chernavin1-2/+5
Type: improvement Currently, RA message sending is enabled by default - both periodic and in response to RS message. However, RFC 4861 section 6.2.1 says the following: Note that AdvSendAdvertisements MUST be FALSE by default so that a node will not accidentally start acting as a router unless it is explicitly configured by system management to send Router Advertisements. With this change, RA message sending is disabled by default and "test_ip6.TestIPv6.test_rs" updated appropriately. Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: I2a8865199cb665c59268504aefe2976e5ee96dc2
2022-03-10tests: fix test failure with parrallel testTianyu Li1-26/+26
Several test cases re-use the same test class name, which leads to test error when do parrallel test with TEST_JOBS=16, change the test class names to unique values. Type: fix Signed-off-by: Tianyu Li <tianyu.li@arm.com> Change-Id: Iefc01d40a25ebd60533baf3a2dc98a537437e8e9
2022-03-07ip: Fixes for IPv6 and MPLS fragmentationNeale Ranns1-0/+7
Type: fix - IPv6 fragmentation did not work if the packet spaneed multiple buffers, because the 'len' calculation to did max out at the size of a buffer - IPv6 fragmentation did not work when the l2unfragmentable size was non-zero, it was not used in the correct places - IPv6oMPLS fragmentation would fragment all IPv6, it should do so only for link local - IPv6oMPLS should send back TooBig ICMP6 for non locally generated Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ie8f02cdfdd7b7e8474e62b6d0acda8f20c371184
2022-03-04ip: rate-limit the sending of ICMP error messagesNeale Ranns1-5/+7
Type: improvement For error conditions, such as TTL expired, dest unreach, etc, Rate limit the sending of ICMP error messages. The rate limiting is done based on src,dst IP address of the received packet. the rate limit has been chosen, somewhat arbitrarily, to be 1e-3. This is the same limit as the ARP throttling. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I4a0b791cde8c941a9bf37de6aa5da56779d3cef4
2022-02-18tests: Consolidate the implementations of send_and_expect_XNeale Ranns1-22/+3
Type: test there were multiple instances of send_and_expect_load_balancing and a send_and_expect_one_itf which has the same functionality as send_and_expect_one. Put one implementation of both in framework.py (where the other send_and_X functions reside). Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I7f629d440220bee29368067f475059322e1134f7
2021-10-04ip: fix punt for ipv6Benoît Ganne1-0/+144
Type: fix Change-Id: I583c30e9b63c0b0b6cd5fef0b2cb9ed7ec9856e2 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-08-09ip6-nd: only respond to RS if sending RA is enabledOle Troan1-1/+15
Even when periodic RAs are disabled VPP would respond to router solicitations. Making it impossible to have an IPv6 enabled interface with hosts connected to it without VPP acting as a default router. This change drops RS messages if the radv_info->send_radv is off. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I9a68f8e12c93c1c00125b54f8fd454f48fa22caa Signed-off-by: Ole Troan <ot@cisco.com>
2021-06-17tests: Tests for cross AF routingNeale Ranns1-0/+124
Type: test Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Iebee39d0974c6f458863ce6144c6a83bc3cf4cb7
2021-05-27ip: allow the 'ip6 enable' on tunnel interface typesNeale Ranns1-2/+78
Type: feature This was limited to HW interface types (for historical reason AFAICT) Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I3785a356ae31722fa60d84f64ec9aa53ebdd615f
2021-04-05ip6-nd: Solicitation reply only if target is our link-localNeale Ranns1-0/+12
Type: fix The fib source IP6_ND is used for all link-local entries, hence solicitation responses were sent for a peer's address. Constrain the source check to also in clude the LOCAL flag, which indicates that the link-local address is ours. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Iba7e66049e4d89ee3f36d77aeb09310b978d70de
2021-03-20tests: add support for worker awarenessKlement Sekera1-1/+1
VppTestCase now has vpp_worker_count property set to number of workers. This can be overriden by child classes. Also overriden by VPP_WORKER_CONFIG variable for legacy reasons. Type: improvement Change-Id: Ic328bacb9003ddf9e92815767653bd362aa7f086 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2021-03-16fib: Allow the creation of new source on the APINeale Ranns1-1/+103
Type: feature an client can dump the existing sources, examine their priorities, then define thier own source. Usefull if a client wants to distingusih between say, static, ospf, bgp, etc routes it has added over the API. Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: I5158b4fa1ebe87381ff8707bb173217f56ea274a
2021-02-15ip: Path MTUNeale Ranns1-1/+234
Type: feature Support setting the MTU for a peer on an interface. The minimum value of the path and interface MTU is used at forwarding time. the path MTU is specified for a given peer, by address and table-ID. In the forwarding plane the MTU is enfored either: 1 - if the peer is attached, then the MTU is set on the peer's adjacency 2 - if the peer is not attached, it is remote, then a DPO is added to the peer's FIB entry to perform the necessary fragmentation. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I8b9ea6a07868b50e97e2561f18d9335407dea7ae
2021-02-15tests: test punt policer bound to worker threadBrian Russell1-0/+44
Add to the IP[46] punt policer handoff tests by binding the policer to a particular worker and checking all packets are policed on that thread. Type: test Signed-off-by: Brian Russell <brian@graphiant.com> Change-Id: I7fab28659ccb65f13f841cec65a3f808281b3f90
2021-02-02tests: verify policer stats in punt testsBrian Russell1-0/+25
Add verification of policer stats in the IP[46] punt paths. Type: test Signed-off-by: Brian Russell <brian@graphiant.com> Change-Id: I8b1035afc2d3abe4e98bdb3a76e87a0dd131ef4b
2021-01-28tests: add ip6 punt policer handoff testBrian Russell1-1/+52
Add a test for ip6 punt policer thread handoff. A child class is created that uses common punt test setup but is configured to have 2 worker threads. Type: test Signed-off-by: Brian Russell <brian@graphiant.com> Change-Id: I65c44f5d79455129accd7cf405c15920a5a9b678
2021-01-28tests: move ip6 punt setup to its own classBrian Russell1-23/+24
Move interface and packet setup for the ip6 punt test to its own class so that child classes can be created that use it. Type: test Signed-off-by: Brian Russell <brian@graphiant.com> Change-Id: I14acedc1bcd12cb320835a36833cd32303c5f793
2021-01-28ip: Router ID included in flow hashNeale Ranns1-4/+22
Type: feature A device/router needs to have a unique ID which is included in the flow has so that flows are not polarised through the network, i.e. each deice in the network chooses the same nth link for the same flow. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I963e03674adbb085902b4084fdc4886b88f5734c
2021-01-22tests: add generalized tags for tests, use them for run-solo testsAndrew Yourtchenko1-5/+2
We have accumulated several scenarios in prod or wishlists where it would be useful to have a general infra to say yes/no about a certain test, and potentially make decisions based on that, for example: - runs solo (aka 'time-dependent') - (wishlist) part of quick smoke-test set - (wishlist) intermittent failure unrelated to timing - (wishlist) test broken with a multi-worker config in vpp Refactor the current "run-solo" code to allow for this extension. Type: test Change-Id: Ia5b3810e57c0543753c8e0dc4dc0cfb4a30b36ac Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> Signed-off-by: Klement Sekera <ksekera@cisco.com>
2021-01-21ip: use IPv6 flowlabel in flow hash computationAhmed Abdelsalam1-3/+3
extends ip6_compute_flow_hash() to include IPv6 flowlabel in flowhash computation Type: improvement Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com> Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: Id1aaa20c9dac729c22b714eea1cdd6e9e4d1f75e
2021-01-20ip: add IPv6 ping test for link-layer addressBenoît Ganne1-31/+27
Type: improvement Change-Id: I9f60e29462c7cb193a8594b7de06418b40573103 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-12-01tests: remove ip_punt from vpp_papi_provider and add ip_punt object modelsJakub Grajciar1-32/+26
Type: refactor Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I1bf53c2554e6b313467f618717698ed158db9065 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2020-10-21ip: convert u32 entry_flags to vl_api_mfib_entry_flags_t on mroute APINeale Ranns1-9/+14
Type: fix This is not an API change, it's the same values, just a different named type. also use VppEnum values in tests Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I3a18b529514f3cc9467ae4e8ac3e88d067fc776b
2020-08-27tests: "force solo" testcase supportAndrew Yourtchenko1-0/+4
Some of the tests are time-sensitive, and at present require a non-trivial modification in order to run at high concurrency. Without these modifications, they intermittently fail, and require the test retries. Rather than setting them to the extended tests and forgetting about them, put them into a "solo" set, which gets run in a single-threaded mode after the rest of the tests are done. Mark a few of the tests that showed errors during TEST_JOBS=48 as forced-solo. Also, give a better diagnostic if the testcase misses a docstring needed to represent it in the diagnostic outputs. Type: fix Change-Id: I33fe62eb17edc1885bd2c3523892051d52da6546 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2020-05-14ip: fix interface ip address del sw_if_index checkyedg1-0/+18
Type: fix Signed-off-by: Ye donggang <yedg@wangsu.com> Change-Id: Ia9f72ff2be455ecd4ff3d16e884c5a50f9df69fe
2020-05-05api: ip: add IP_ROUTE_LOOKUP APIChristian Hopps1-0/+74
Add an IP_ROUTE_LOOKUP function that does either an exact match or longest prefix match in a given fib table for a given prefix returning the match if present. Add API test. Type: improvement Signed-off-by: Christian Hopps <chopps@labn.net> Change-ID: I67ec5a61079f4acf1349a9c646185f91f5f11806
2020-04-24ip: Setting the Link-Local address from the API enables IPv6 on theNeale Ranns1-3/+91
interface Type: fix Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I0b7c189006e30a357cd6be4f3c9c61fded4157cb
2020-04-23ip: Replace Sematics for Interface IP addressesNeale Ranns1-0/+161
Type: feature - replace functions for prefixes attached to interfaces - add ip_interface.[ch] to consoldate the functions Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I9c0c39c09dbf80ea1aadefee02c9bd16f094b6ad
2020-04-06misc: fix python sonarcloud BLOCKER level issuesPaul Vinciguerra1-0/+1
Fix of the top 11 python issues flagged as BLOCKER. Ticket: VPP-1856 Type: fix Change-Id: Icf4691e62f4a69d6ee196b6d6e2ab52d961b5c76 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-03-17fib: Always install all routers mcast addressesNeale Ranns1-1/+1
Type: improvement Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ia8dff15855a81cf29729bdaa3ff28fbe3254fa97
2020-03-12policer: API cleanupJakub Grajciar1-4/+4
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: Ia14f33992353b419b70b55beed63ab8ed6a2e837 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2020-02-10ip-neighbor: fix MLD reports not being sentNeale Ranns1-1/+31
Type: fix Change-Id: I8f81cd6c29ff8cb4f0b4850b8b1f6611d89ddb38 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-02-07tests: support python 3.8Ole Troan1-1/+1
Make test framework python3 version independence. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I1ef1eb77b6c1f422ebc4dad0818f87c8e587b34b
2019-12-17ip: Protocol Independent IP NeighborsNeale Ranns1-18/+37
Type: feature - ip-neighbour: generic neighbour handling; APIs, DBs, event handling, aging - arp: ARP protocol implementation - ip6-nd; IPv6 neighbor discovery implementation; separate ND, MLD, RA - ip6-link; manage link-local addresses - l2-arp-term; events separated from IP neighbours, since they are not the same. vnet retains just enough education to perform ND/ARP packet construction. arp and ip6-nd to be moved to plugins soon. Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-14tests: changes for scapy 2.4.3 migrationsnaramre1-2/+1
Type: fix Change-Id: I7e041b666dabd90df23a920a1f1d99db4c10ddfe Signed-off-by: snaramre <snaramre@cisco.com>
2019-11-26fib: Table ReplaceNeale Ranns1-2/+143
Type: feature from the API doc, a table replace is: " The use-case is that, for some unspecified reason, the control plane has a very different set of entries it wants in the table than VPP currently has. The CP would thus like to 'replace' VPP's current table only by specifying what the new set of entries shall be, i.e. it is not going to delete anything that already eixts. the CP delcartes the start of this procedure with this begin_replace API Call, and when it has populated all the entries it wants, it calls the below end_replace API. From this point on it is of coursce free to add and delete entries as usual. The underlying mechanism by which VPP implements this replace is purposefully left unspecified. " In the FIB, the algorithm is implemented using mark and sweep. Algorithm goes: 1) replace_begin: this marks all the entries in that table as 'stale' 2) download all the entries that should be in this table - this clears the stale flag on those entries 3) signal the table converged: ip_table_replace_end - this removes all entries that are still stale this procedure can be used when an agent first connects to VPP, as an alternative to dump and diff state reconciliation. Change-Id: I168edec10cf7670866076b129ebfe6149ea8222e Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-15tests: Remove the unrequired VPP IP address/prefix class wrappersNeale Ranns1-10/+9
Type: refactor Change-Id: I204f3f8eebc5f5d5a377e91262f91c615fd00168 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-08tests: python3 use byte strings in raw()Ole Troan1-17/+17
Raw('\xaf) and Raw(b'\xaf) are two quite different things in python 2 versus 3. In most cases this didn't make a difference, apart from those cases where length of payload actually mattered. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I3cba5c1486e436a3ca8aa10a7b393da75aa9f6b9
2019-11-05misc: Fix python scripts shebang lineRenato Botelho do Couto1-1/+1
Type: fix Since CentOS 8, RPM build script doesn't accept '#!/usr/bin/env python' as a valid shebang line. It requires scripts to explicitly chose between python2 or python3. Change all to use python3 as suggested by Paul Vinciguerra. Depends-On: https://gerrit.fd.io/r/23170 Signed-off-by: Renato Botelho do Couto <renato@netgate.com> Change-Id: Ie72af9f60fd0609e07f05b70f8d96e738b2754d1
2019-10-28tests: make RA tests run on VPP timeAndrew Yourtchenko1-7/+7
the IPv6 RA tests take timing into the account, but the time inside VPP may go slightly differently compared to the time inside the driving python thread, if the machine running the tests is heavily loaded. Make a sleep function which sleeps "on VPP time" and use it. Change-Id: I3b34b0164f6e0ec7a619b92ee308089a4a8935e3 Type: test Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-10-16tests: python3 changes for ip6 fib testssnaramre1-1/+1
Type: fix Change-Id: Ie7764fec13cbb83b6899c7c33b7b2f8cc5d40c8a Signed-off-by: snaramre <snaramre@cisco.com>