aboutsummaryrefslogtreecommitdiffstats
path: root/test/test_ip6.py
AgeCommit message (Collapse)AuthorFilesLines
2019-11-05tests: make RA tests run on VPP timeAndrew Yourtchenko1-7/+7
the IPv6 RA tests take timing into the account, but the time inside VPP may go slightly differently compared to the time inside the driving python thread, if the machine running the tests is heavily loaded. Make a sleep function which sleeps "on VPP time" and use it. Change-Id: I3b34b0164f6e0ec7a619b92ee308089a4a8935e3 Type: test Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> (cherry picked from commit 63cb8827e586f02f53512d23a8e7596fe9c19aa8)
2019-09-18ip: allow addrs from the same prefix on intfMatthew Smith1-2/+77
Type: feature Adding a prefix to an interface was not permitted if it overlapped with another prefix on an interface which used the same FIB. Loosen the restriction. Allow 2 or more addresses from the same prefix on a single interface. Reference count the prefix to figure out when a glean/connected route for the prefix needs to be added or removed. Added unit tests to check that the route is only removed when all addresses in the prefix are removed from the interface. Change-Id: I1a962ecb5e1ee65fc6d41f98a4cc097a51a55321 Signed-off-by: Matthew Smith <mgsmith@netgate.com> (cherry picked from commit 6c92f5babdc3c52cf343509fc9cf9d8a9a3df390)
2019-06-26api: refactor format_vl_api_prefix_t return keysPaul Vinciguerra1-20/+22
format_vl_api_prefix_t returns a dict with keys 'address' and 'address_length', but other format_vl_api_prefix functions return a dict with 'prefix', and 'len'. Refactor all format_vl_api_prefix_t to return consistent keys 'address' and 'len'. Type: refactor Change-Id: I5f9558fc2da8742a303266e011102f5b2db80aad Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-18fib: fib api updatesNeale Ranns1-109/+58
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-18ip: reassembly-separate feature and custom codeKlement Sekera1-0/+18
This change is made fix a crash, because is_feature flag semantics turn out to be different from "custom app code" semantics. Introduce a flag which custom plugins/apps can use to instead of tying that code to is_feature flag. Change-Id: Ief5898711e68529f9306cfac54c4dc9b3650f9e3 Ticket: N/A Type: fix Fixes: 21aa8f1022590b8b5caf819b4bbd485de0f1dfe5 Signed-off-by: Klement Sekera <ksekera@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com>
2019-05-28Add an ip6 local hop-by-hop protocol demux tableDave Barach1-1/+14
Add a minimal ip6 hbh header processing test. ioam plugin: use ip6_local_hop_by_hop_register_protocol() in udp_ping_init(). Please test the ioam plugin udp_ping path AYEC, so I can publish the patch. Change-Id: I74e35276d6c38c31022026cfd238fad5e4a54485 Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-16tests: refactor. Replace literal constant w/ named constant.Paul Vinciguerra1-3/+6
* change literal packet count vlaues from 65 to a named constant of 67. (This value was recommended to exercise single, dual, and quad loops) Change-Id: Ieb1738dddacb8b6ea7fa25883032ac01a98399e1 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-04-10Tests Cleanup: Fix missing calls to setUpClass/tearDownClass.Paul Vinciguerra1-0/+76
Continuation/Part 2 of https://gerrit.fd.io/r/#/c/17092/ Change-Id: Id0122d84eaf2c05d29e5be63a594d5e528ee7c9a Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-28Typos. A bunch of typos I've been collecting.Paul Vinciguerra1-15/+16
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-11vpp_papi_provider: Remove more wrapper functions.Ole Troan1-4/+8
Split this work up into pieces. Please don't add new wrappers to vpp_papi_provider.py. Change-Id: I0f8f2afc4cd2bba07ea70ddecea2d7319f7b2e10 Signed-off-by: Ole Troan <ot@cisco.com>
2019-03-11VPP-1508: Tests: Fix vpp_api struct.error under py3.Paul Vinciguerra1-3/+3
Fix struct.error: expected bytes object got <class 'str'> Change-Id: I837ae6e97e44c789a9372677151b157956525334 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-11VPP-1508: Use scapy.compat to manage packet level library differences.Paul Vinciguerra1-0/+1
Change-Id: Icdf6abc9e53d33b26fd1d531c7dda6be0bb9cb55 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-07Tests: Refactor payload_to_info()Paul Vinciguerra1-1/+1
All callers of payload_to_info were required to wrap payload with str(). Refactor to call scapy's payload.load for raw payloads or specify the specific fieldname. Change-Id: I1c80599d4df8dc129dbb8274733afaad406d5bcf Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-06test framework: vpp_papi_provider.py - further cleanupOle Troan1-10/+8
Part of further cleanups of this file. Removed most wrappers that don't have conflicting signature with message API. Change-Id: I6acd93d20291feb7731eb35ab2eb8c9f22f4632c Signed-off-by: Ole Troan <ot@cisco.com>
2019-03-04test framework: Fix wrapper functions to match API message names.Ole Troan1-4/+4
In preparation to remove the wrappers in vpp_papi_provider.py, ensure names used in tests match the actual API message names. Change-Id: I230ca4eb75aa727ff68d702e085a2edbbc6b6d19 Signed-off-by: Ole Troan <ot@cisco.com>
2019-03-01Tests: Refactor duplicated code.Paul Vinciguerra1-7/+1
Naveen suggested earlier today that we should refactor duplicate code. This commit kicks off the effort. Change-Id: I855b0f40d41d1f3a2e673f3b254b76b596409656 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-02-26VPP-1508 python tests: unicodePaul Vinciguerra1-3/+8
Change unicode references to use text_type Change-Id: Ia71c16e3235bc509abd3b1c651ae125f892ab108 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-02-20TESTS: refactor framework send_and_expect.Paul Vinciguerra1-6/+6
Create a common pg_send method for cases when results are just discarded. Change-Id: I786960d2d7bbb96dcb407f6e59aa96951b7b19e7 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-01-30Use IP and MAC API types for neighborsNeale Ranns1-33/+26
use address_t and mac_address_t for IPv6 and ARP entries and all other API calls in ip.api aprat from the route ones, that will follow in a separate commit Change-Id: I67161737c2184d3f8fc1e79ebd2b55121c5b0191 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-12-16IP6-MFIB: replace the radix tree with bihash (VPP-1526)Neale Ranns1-21/+43
Change-Id: I7a48890c075826fbd8c75436dfdc5ffff230a693 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-12-12PAPI: Allow ipaddress object as argument and return values from API callsOle Troan1-6/+6
The API calls that use any of vl_api_address_t, vl_api_ip4_address, vl_api_ip6_address_t, vl_api_prefix_t, vl_api_ip4_prefix_t, vl_api_ip6_prefix_t now accepts either the old style dictionary, a text string (2001:db8::/32) or an ipaddress ojbect. Unless it is called with '_no_type_conversion':True, it will also return an appropriate ipaddress object. Change-Id: I84e4a1577bd57f6b5ae725f316a523988b6a955b Signed-off-by: Ole Troan <ot@cisco.com>
2018-12-06API: Change ip4_address and ip6_address to use type alias.Ole Troan1-1/+1
Change-Id: Id8669bbadd1d6b2054865a310a654e9b38d1667d Signed-off-by: Ole Troan <ot@cisco.com>
2018-12-05VPP-1508 python3 tests: xrangePaul Vinciguerra1-20/+21
xrange is not supported. Use six.range. py27 runtests: commands[5] | stestr --test-path ./test run --slowest test_ip4 test_ip6 ============================================================================== IPv4 disabled ============================================================================== ============================================================================== ICMP Echo Test Case ============================================================================== {0} test.test_ip4.TestIPDisabled.test_ip_disabled [5.256819s] ... ok 07:24:41,902 Couldn't stat : /tmp/vpp-unittest-TestICMPEcho-hU4IsB/stats.sock {1} test.test_ip4.TestICMPEcho.test_icmp_echo [0.367035s] ... ok ============================================================================== IPv4 Deaggregate Routes ============================================================================== ============================================================================== IPv4 Input Exceptions ============================================================================== 07:24:47,314 Couldn't stat : /tmp/vpp-unittest-TestIPDeag-eE1VgC/stats.sock {1} test.test_ip4.TestIPDeag.test_ip_deag [5.895646s] ... ok {0} test.test_ip4.TestIPInput.test_ip_input [5.819001s] ... ok ============================================================================== IPv4 longest Prefix Match ... output truncated ... ============================== Failed 4 tests - output below: ============================== test.test_ip4.TestIPv4FibCrud.test_3_add_new_routes --------------------------------------------------- Captured traceback: ~~~~~~~~~~~~~~~~~~ Traceback (most recent call last): File "/vpp/test/test_ip4.py", line 509, in test_3_add_new_routes self.deleted_routes.remove(x) ValueError: list.remove(x): x not in list test.test_ip4.TestIPv4FibCrud.test_2_del_routes ----------------------------------------------- Captured traceback: ~~~~~~~~~~~~~~~~~~ Traceback (most recent call last): File "/vpp/test/test_ip4.py", line 478, in test_2_del_routes self.configured_routes.remove(x) ValueError: list.remove(x): x not in list test.test_ip4_vrf_multi_instance.TestIp4VrfMultiInst.test_ip4_vrf_03 -------------------------------------------------------------------- Captured traceback: ~~~~~~~~~~~~~~~~~~ Traceback (most recent call last): File "/vpp/test/test_ip4_vrf_multi_instance.py", line 465, in test_ip4_vrf_03 self.create_vrf_and_assign_interfaces(1) File "/vpp/test/test_ip4_vrf_multi_instance.py", line 189, in create_vrf_and_assign_interfaces pg_if.set_table_ip4(vrf_id) File "/vpp/test/vpp_interface.py", line 322, in set_table_ip4 self.sw_if_index, 0, self.ip4_table_id) File "/vpp/test/vpp_papi_provider.py", line 264, in sw_interface_set_table 'vrf_id': table_id}) File "/vpp/test/vpp_papi_provider.py", line 196, in api raise UnexpectedApiReturnValueError(msg) test.vpp_papi_provider.UnexpectedApiReturnValueError: API call failed, expected 0 return value instead of -114 in sw_interface_set_table_reply(_0=91, context=1007, retval=-114) test.test_ip4_vrf_multi_instance.TestIp4VrfMultiInst.test_ip4_vrf_02 -------------------------------------------------------------------- Captured traceback: ~~~~~~~~~~~~~~~~~~ Traceback (most recent call last): File "/vpp/test/test_ip4_vrf_multi_instance.py", line 445, in test_ip4_vrf_02 self.reset_vrf_and_remove_from_vrf_list(1) File "/vpp/test/test_ip4_vrf_multi_instance.py", line 208, in reset_vrf_and_remove_from_vrf_list self.vapi.reset_fib(vrf_id, is_ipv6=0) File "/vpp/test/vpp_papi_provider.py", line 1137, in reset_fib 'is_ipv6': is_ipv6, File "/vpp/test/vpp_papi_provider.py", line 196, in api raise UnexpectedApiReturnValueError(msg) test.vpp_papi_provider.UnexpectedApiReturnValueError: API call failed, expected 0 return value instead of -3 in reset_fib_reply(_0=259, context=1198, retval=-3) ====== Totals ====== Ran: 57 tests in 266.0000 sec. - Passed: 53 - Skipped: 0 - Expected Fail: 0 - Unexpected Success: 0 - Failed: 4 Sum of execute time for each test: 157.3925 sec. ============== Worker Balance ============== - Worker 0 (29 tests) => 0:03:52.608995 - Worker 1 (28 tests) => 0:04:08.615473 Test id Runtime (s) --------------------------------------------- ----------- test.test_ip_mcast.TestIPMcast.test_ip6_mcast 8.535 test.test_ip4.TestIPPunt.test_ip_punt 8.082 test.test_ip6.TestIP6Punt.test_ip_punt 6.582 test.test_ip6.TestIPDeag.test_ip_deag 6.175 test.test_ip6.TestIPv6.test_ns 6.171 test.test_ip4.TestIPDeag.test_ip_deag 5.896 test.test_ip6.TestIPv6.test_fib 5.846 test.test_ip4.TestIPInput.test_ip_input 5.819 test.test_ip6.TestIPv6.test_rs 5.737 test.test_ip4.TestIPv4.test_fib 5.267 ERROR: InvocationError for command '/vpp/.tox/py27/bin/stestr --test-path ./test run --slowest test_ip4 test_ip6' (exited with code 1) ______________________________________________________ summary ______________________________________________________ ERROR: py27: commands failed Change-Id: Id9f6ecb4897386f790d82ab908963e4971a3aac8 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-11-30Tests: Fix traceback.Paul Vinciguerra1-108/+162
self.assertTrue(packet.haslayer(msg_type)) File "/usr/lib/python2.7/unittest/case.py", line 422, in assertTrue raise self.failureException(msg) AssertionError: 0 is not true * Scapy packet.haslayer() returns 1 or 0. Replace with assertEqual(packet.haslayer(), 1) to fix tracebacks. * Scapy has multiple layers called TCP/UDP Specify the module name to prevent namespace collisions. * Remove duplicate import. Change-Id: I600f9f330075cd40e1da50f8b2ceb24f645f2c20 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-11-29VPP-1507: Added binary api to dump configured ip_punt_redirectPavel Kotucek1-12/+42
Change-Id: I790f7785e183cc9aaffd5b593617c4e12a32e20d Signed-off-by: Pavel Kotucek <pavel.kotucek@pantheon.tech>
2018-11-26Python3 tests: Fix asserts.Paul Vinciguerra1-2/+2
Use assert(Not)Equal() Use assert{Greater,Less}[Equal] Change-Id: I7c14570b8dce463ee13a67e9c1f10beb1a0308a8 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-09-11GBP Endpoint UpdatesNeale Ranns1-1/+2
- common types on the API - endpoints keyed in various ways for DP lookup - conparison functions for VPP IP address types Change-Id: If7ec0bbc5cea71fd0983fe78987d147ec1bd7ec8 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-08-03loop counter to prevent infiinte number of look ups per-packetNeale Ranns1-1/+120
Change-Id: I59235d11baac18785a4c90cdaf14e8f3ddf06dab Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-07-02make_test: add icmp packet size sweep and icmp echo testsJan Gelety1-23/+101
Jira: CSIT-1141 Change-Id: I162bb4e718bff188abefc7b2f33501de9c55bb03 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2018-05-15No overlapping sub-nets on any interface in the same table/VRF (VPP-943)Neale Ranns1-1/+5
DBGvpp# set int ip addr loop0 10.10.10.10/24 DBGvpp# set int ip addr loop0 10.10.10.11/24 set interface ip address: failed to add 10.10.10.11/24 which conflicts with 10.10.10.10/24 for interface loop0 Change-Id: Iba63ffafbd36b6146ce86adb78139da9d55b40ba Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-27IPv6 NS: use the mcast rewrite node to fill in the destination MACNeale Ranns1-1/+1
- move the IPv6 incomplete and glean node to ip6_neighbour.c (so it has access to ip6_neighbour_main_t) - use the RA info config on the interface to find the multicast adj to use Change-Id: I835e419072abe54fb09dafb0e7eb0a9e50eba1af Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-16IPv6 ND Router discovery control plane (VPP-1095)Juraj Sloboda1-0/+175
Change-Id: I4b5b60e7c6f618bb935eab1e96a2e79bbb14f58f Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-03-16IPv6 ND Router discovery data plane (VPP-1095)Juraj Sloboda1-3/+113
Add API call to send Router Solicitation messages. Save info from incoming Router Advertisement messages and notify listeners. Change-Id: Ie518b5492231e03291bd4c4280be4727bfecab46 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-01-09test: consolidate the multiple versions of send_and_*Neale Ranns1-49/+0
Change-Id: I7fa7d0ebf73dab8264a2e5ddbd412600d78ead05 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-11MPLS disposition actions at the tail of unicast LSPsNeale Ranns1-2/+2
Change-Id: I8c42e26152f2ed1246f91b789887bfc923418bdf Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-31Refactor IP input checks for re-use at MPLS dispositionNeale Ranns1-1/+77
Change-Id: I7aafdecd6f370411138e6ab67b2ff72cda6e0666 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-10punt and drop features:Neale Ranns1-1/+113
- new IPv4 and IPv6 feature arcs on the punt and drop nodes - new features: - redirect punted traffic to an interface and nexthop - police punted traffic. Change-Id: I53be8bf4e06545add8a3619e462de5ffedd0a95c Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-11FIB table add/delete APINeale Ranns1-2/+5
part 2; - this adds the code to create an IP and MPLS table via the API. - but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass. Change-Id: Id124d884ade6cb7da947225200e3bb193454c555 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-08L2 over MPLSNeale Ranns1-13/+13
[support for VPWS/VPLS] - switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths - VLIB nodes to handle pop/push of MPLS labels to L2 Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-01Tests for recursive load-balancing with no choices.Neale Ranns1-0/+33
Change-Id: I90bb3369576741d03628a818ffa63cc99d6e4c98 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-26ARP/ND use path_remove to complement path_addNeale Ranns1-0/+117
don't add duplicate extensions. Change-Id: Icf72d6e1b004d0dda532bec2b51f6b74544925bb Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-25MPLS hash function improvementsNeale Ranns1-23/+94
Change-Id: I28e98f445c01493562b6196a4f5b532a51f178af Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-26IP Flow Hash Config fixesNeale Ranns1-0/+149
- the flow hash config is (and was) cached on the load-balance object so the fib_table_t struct is not used a switch time. Therefore changes to the table's flow hash config need to be propagated to all load-balances and hance all FIB entries in the table. - enable API for setting the IPv6 table flow hash config - use only the hash config in the fib_table_t object and not on the ipX_fib_t - add tests. Change-Id: Ib804c11162c6d4972c764957562c372f663e05d4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-19Learn IP6 link-local ND entries from NSs sourced from link-local addressNeale Ranns1-26/+80
Change-Id: I4c3ce4d58df7977490fc94991291422ea1e31ee3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-17Fix IP feature ordering.Neale Ranns1-1/+99
Drop comes before lookup when enabled. is_first_or_last is not required when setting a feature, the anchor is added in find_config_with_features(). Don't make the PG interfaces automatically L3 enabled, this way we can have tests that check the L3 protocol disbaled behaviour. Change-Id: Icef22a920b27ff9cec6ab2da6b05f05c532cb60f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-09IMplementation for option to not create a FIB table entry when adding a ↵Neale Ranns1-2/+26
neighbor entry Change-Id: I952039e101031ee6a06e63f4c73d8eb359423e1a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-09Tests to target holes in adjacency and DPO test coverageNeale Ranns1-1/+70
Change-Id: Ic6ac7e441a7b75baa02f03c1585d1ae00903a399 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-08Proxy ND (RFC4389 - or a sub-set thereof). This allows the 'emulation' of ↵Neale Ranns1-17/+276
bridging. That is hosts in one sub-net reachable via differenet interfaces. Introducate a new API command: ip6 nd proxy <host-address> <interface> this indicates 2 things; 1) that host <host-address> is reachable out of interface <interface>. VPP will thus install that route. 2) NS requests sent to <host-address> will be responeded to (i.e. proxied). Change-Id: I863f967fdb5097ab3b574769c70afdbfc8d5478a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-03IPv6 RA improvementsNeale Ranns1-5/+214
1) tests for RA options 2) memleaks deleteing a ip6_radv_info_t 3) MLD prefix code refactoring Change-Id: I34db103994bd8fbdbbec50b202d72770dd145681 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-03pep8 compliance for test_ip6.pyNeale Ranns1-3/+3
Change-Id: If29a1eba3e7056903978de782c062589bec0137e Signed-off-by: Neale Ranns <nranns@cisco.com>