aboutsummaryrefslogtreecommitdiffstats
path: root/test/test_ip_mcast.py
AgeCommit message (Collapse)AuthorFilesLines
2018-10-04MFIB-API: when programming an (S,G) fix the grp-lenNeale Ranns1-2/+2
Change-Id: I97052d29080501de53fe95499c860faf0765e81d Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-10-01mroute routers in the stats segmentNeale Ranns1-0/+7
Change-Id: I798e4fb6470ae9e763f8de1c290ff0fc3c0b7f9e Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-11GBP Endpoint UpdatesNeale Ranns1-1/+2
- common types on the API - endpoints keyed in various ways for DP lookup - conparison functions for VPP IP address types Change-Id: If7ec0bbc5cea71fd0983fe78987d147ec1bd7ec8 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-06-24Revert "Revert "make test: fix broken interfaces""Klement Sekera1-3/+1
This reverts commit c8efa29b6f9a91381897b54f1147daf922ed7164. Change-Id: I1d5c5773d5f86a63073e255336bd9de628e26179 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-06-22Revert "make test: fix broken interfaces"Ole Troan1-1/+3
This reverts commit d5c60b96a3fd93916fc4af5c8d6d25625c28242e. Change-Id: I3632b9c3f76c615aee897f28f76d094e7031e689 Signed-off-by: Ole Troan <ot@cisco.com>
2018-06-22make test: fix broken interfacesKlement Sekera1-3/+1
Change-Id: I2e092774f81503e04b53cc6c6b5d357fe3fc52ab Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-04-17IP mcast: allow unicast address as a next-hopNeale Ranns1-3/+50
Change-Id: I5e679f2601e37688f2768620479dc2efb7d19ca3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-01-24Improve the error reporting for a IP multicast RPF miss.Neale Ranns1-0/+9
now we get: 00:00:04:288925: pg-input ... 00:00:04:289345: ethernet-input ... 00:00:04:289524: ip6-input ... 00:00:04:289553: ip6-mfib-forward-lookup ... 00:00:04:289584: ip6-mfib-forward-rpf entry 14 itf 2 flags Forward, 00:00:04:289754: ip6-drop UDP: 2002::1 -> ff01:2::255 tos 0x00, flow label 0x0, hop limit 64, payload length 21 UDP: 1234 -> 1234 length 21, checksum 0x90d1 00:00:04:289802: error-drop ip4-input: Multicast RPF check failed 08:36:44,517 Count Node Reason 182 ip4-input Multicast RPF check failed 8 ip6-icmp-input neighbor advertisements sent 8 ip6-icmp-input router advertisements sent 8 arp-input ARP replies sent Change-Id: I1b29cda4ec77a88db45bfb25c7473cd64bbf501a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-12-13IP bi-direction multicast - same cable check on egressNeale Ranns1-3/+43
Change-Id: I655382f7f74181dd7c795a2b22f151f76b50e793 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-09BIERNeale Ranns1-28/+29
- see draft-ietf-bier-mpls-encapsulation-10 - midpoint, head and tail functions - supported payload protocols; IPv4 and IPv6 only. Change-Id: I59d7363bb6fdfdce8e4016a68a9c8f5a5e5791cb Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-11FIB table add/delete APINeale Ranns1-3/+95
part 2; - this adds the code to create an IP and MPLS table via the API. - but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass. Change-Id: Id124d884ade6cb7da947225200e3bb193454c555 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-06-01IP Mcast - recalculate on interface up/dowmNeale Ranns1-18/+24
Change-Id: Ie5b88fd7187ed62218a2e4e0e493c33e3e9ecc2f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-07MPLS McastNeale Ranns1-0/+1
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-27Mcast rewrite no memcpyNeale Ranns1-2/+0
use a 32bit mask in the adjacency to AND with the IP address and OR into the rewrite. Change-Id: I80b0f246c18fd74f3e43c5d49e25833412f34665 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-17Fix IP feature ordering.Neale Ranns1-18/+2
Drop comes before lookup when enabled. is_first_or_last is not required when setting a feature, the anchor is added in find_config_with_features(). Don't make the PG interfaces automatically L3 enabled, this way we can have tests that check the L3 protocol disbaled behaviour. Change-Id: Icef22a920b27ff9cec6ab2da6b05f05c532cb60f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-15No vector allocation during buffer copyNeale Ranns1-9/+38
Change-Id: I7e8556af833ca0e00fadc96dcd2077ff1104541b Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-09Tests to target holes in adjacency and DPO test coverageNeale Ranns1-4/+19
Change-Id: Ic6ac7e441a7b75baa02f03c1585d1ae00903a399 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-20Python test IP and MPLS objects conform to infra.Neale Ranns1-70/+85
Add IP[46] MFIB dump. Change-Id: I4a2821f65e67a5416b291e4912c84f64989883b8 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-05Test checksyle for IP mcast testsNeale Ranns1-2/+2
Change-Id: I20b61b7e63f74b4656d84717633e06646514c5eb Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-03Next node frame over-flow after replicationNeale Ranns1-4/+12
Change-Id: I25077dd0739787de4f7512e5a70a62e8c34c28e4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-01-27IP Multicast FIB (mfib)Neale Ranns1-0/+612
- IPv[46] mfib tables with support for (*,G/m), (*,G) and (S,G) exact and longest prefix match - Replication represented via a new replicate DPO. - RPF configuration and data-plane checking - data-plane signals sent to listening control planes. The functions of multicast forwarding entries differ from their unicast conterparts, so we introduce a new mfib_table_t and mfib_entry_t objects. However, we re-use the fib_path_list to resolve and build the entry's output list. the fib_path_list provides the service to construct a replicate DPO for multicast. 'make tests' is added to with two new suites; TEST=mfib, this is invocation of the CLI command 'test mfib' which deals with many path add/remove, flag set/unset scenarios, TEST=ip-mcast, data-plane forwarding tests. Updated applications to use the new MIFB functions; - IPv6 NS/RA. - DHCPv6 unit tests for these are undated accordingly. Change-Id: I49ec37b01f1b170335a5697541c8fd30e6d3a961 Signed-off-by: Neale Ranns <nranns@cisco.com>