aboutsummaryrefslogtreecommitdiffstats
path: root/test/test_ipsec_ah.py
AgeCommit message (Collapse)AuthorFilesLines
2023-11-03tests: refactor asf framework codeDave Wallace1-1/+1
- Make framework.py classes a subset of asfframework.py classes - Remove all packet related code from asfframework.py - Add test class and test case set up debug output to log - Repatriate packet tests from asf to test directory - Remove non-packet related code from framework.py and inherit them from asfframework.py classes - Clean up unused import variables - Re-enable BFD tests on Ubuntu 22.04 and fix intermittent test failures in echo_looped_back testcases (where # control packets verified but not guaranteed to be received during test) - Re-enable Wireguard tests on Ubuntu 22.04 and fix intermittent test failures in handshake ratelimiting testcases and event testcase - Run Wiregard testcase suites solo - Improve debug output in log.txt - Increase VCL/LDP post sleep timeout to allow iperf server to finish cleanly. - Fix pcap history files to be sorted by suite and testcase and ensure order/timestamp is correct based on creation in the testcase. - Decode pcap files for each suite and testcase for all errors or if configured via comandline option / env var - Improve vpp corefile detection to allow complete corefile generation - Disable vm vpp interfaces testcases on debian11 - Clean up failed unittest dir when retrying failed testcases and unify testname directory and failed linknames into framwork functions Type: test Change-Id: I0764f79ea5bb639d278bf635ed2408d4d5220e1e Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2023-02-06ipsec: fix SA names consistency in testsArthur de Kerhor1-8/+8
In some IPsec tests, the SA called scapy_sa designs the SA that encrypts Scapy packets and decrypts them in VPP, and the one called vpp_sa the SA that encrypts VPP packets and decrypts them with Scapy. However, this pattern is not consistent across all tests. Some tests use the opposite logic. Others even mix both correlating scapy_tra_spi with vpp_tra_sa_id and vice-versa. Because of that, sometimes, the SA called vpp_sa_in is used as an outbound SA and vpp_sa_out as an inbound one. This patch forces all the tests to follow the same following logic: - scapy_sa is the SA used to encrypt Scapy packets and decrypt them in VPP. It matches the VPP inbound SA. - vpp_sa is the SA used to encrypt VPP packets and decrypt them in Scapy. It matches the VPP outbound SA. Type: fix Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com> Change-Id: Iadccdccbf98e834add13b5f4ad87af57e2ea3c2a
2022-06-28ipsec: change wildcard value for any protocol of spd policyPiotr Bronowski1-6/+6
Currently 0 has been used as the wildcard representing ANY type of protocol. However 0 is valid value of ip protocol (HOPOPT) and therefore it should not be used as a wildcard. Instead 255 is used which is guaranteed by IANA to be reserved and not used as a protocol id. Type: improvement Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com> Change-Id: I2320bae6fe380cb999dc5a9187beb68fda2d31eb
2022-05-10tests: replace pycodestyle with blackKlement Sekera1-169/+284
Drop pycodestyle for code style checking in favor of black. Black is much faster, stable PEP8 compliant code style checker offering also automatic formatting. It aims to be very stable and produce smallest diffs. It's used by many small and big projects. Running checkstyle with black takes a few seconds with a terse output. Thus, test-checkstyle-diff is no longer necessary. Expand scope of checkstyle to all python files in the repo, replacing test-checkstyle with checkstyle-python. Also, fixstyle-python is now available for automatic style formatting. Note: python virtualenv has been consolidated in test/Makefile, test/requirements*.txt which will eventually be moved to a central location. This is required to simply the automated generation of docker executor images in the CI. Type: improvement Change-Id: I022a326603485f58585e879ac0f697fceefbc9c8 Signed-off-by: Klement Sekera <klement.sekera@gmail.com> Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2021-08-13tests docs: upgrade python packagesDave Wallace1-22/+24
- Upgrade python package requirements for test & docs - Clean up docs generation warnings - Consolidate python requirements for docs in test requirements specs. - Upgrade pip Type: make Change-Id: I74a3924b43ed93d15b32ec9f6fc41ed1ba95b69b Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2021-02-25tests: Add tests for IPSec async mode using the crypto SW schedulerNeale Ranns1-4/+4
Type: test Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Iabc8f2b09ee10a82aacebd36acfe8648cf69b7d7
2021-02-10ipsec: Use the new tunnel API types to add flow label and TTL copyNeale Ranns1-2/+4
support Type: feature attmpet 2. this includes changes in ah_encrypt that don't use uninitialised memory when doing tunnel mode fixups. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ie3cb776f5c415c93b8a5ee22f22586fd0181110d
2021-02-09Revert "ipsec: Use the new tunnel API types to add flow label and TTL copy"Matthew Smith1-4/+2
This reverts commit c7eaa711f3e25580687df0618e9ca80d3dc85e5f. Reason for revert: The jenkins job named 'vpp-merge-master-ubuntu1804-x86_64' had 2 IPv6 AH tests fail after the change was merged. Those 2 tests also failed the next time that job ran after an unrelated change was merged. Change-Id: I0e2c3ee895114029066c82624e79807af575b6c0 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2021-02-08ipsec: Use the new tunnel API types to add flow label and TTL copyNeale Ranns1-2/+4
support Type: feature Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I6d4a9b187daa725d4b2cbb66e11616802d44d2d3
2020-11-02ipsec: Tunnel SA DSCP behaviourNeale Ranns1-2/+94
Type: feature - use tunnel_encap_decap_flags to control the copying of DSCP/ECN/etc during IPSEC tunnel mode encap. - use DSCP value to have fixed encap value. Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: If4f51fd4c1dcbb0422aac9bd078e5c14af5bf11f
2019-12-23ipsec: Test and fix IPSec worker hand-offNeale Ranns1-1/+9
Type: fix Change-Id: I5cb9a3845ddbc5f4de4eb4e9c481f606fe5cec9a Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-08ipsec: remove dedicated IPSec tunnelsNeale Ranns1-0/+1
APIs for dedicated IPSec tunnels will remain in this release and are used to programme the IPIP tunnel protect. APIs will be removed in a future release. see: https://wiki.fd.io/view/VPP/IPSec Type: feature Change-Id: I0f01f597946fdd15dfa5cae3643104d5a9c83089 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-18fib: fib api updatesNeale Ranns1-2/+1
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-04-25crypto_ipsecmb: use pre-expanded keysDamjan Marion1-1/+1
Change-Id: Ie1d34b7e71554516595e0cd228e2cd54a3b8d629 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-04-11IPSEC-MB: Use random & non-repeating IV (VPP-1642)Neale Ranns1-1/+1
hard code IV and key lengths based on cipher. Init IV from random data, use AES instruction to rotate. Change-Id: I13a6507d12267b823c528660a903787baeba47a0 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-10crypto: Intel IPSEC-MB engineNeale Ranns1-39/+47
A plugin to use Intel IPSec MB library as a VPP crypto engine This changes uses concepts from: https://gerrit.fd.io/r/#/c/17301/ hence that author's work is acknowledge below Change-Id: I2bf3beeb10f3c9706fa5efbdc9bc023e310f5a92 Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-04-10IPSEC: for each engine and algorithm testsNeale Ranns1-189/+229
refactor the IPSEC tests a bit so we can parameterise the setup. Change-Id: I777e5eb8f29ca1dce3dd273ebd05dae5846790af Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-10Tests Cleanup: Fix missing calls to setUpClass/tearDownClass.Paul Vinciguerra1-0/+8
Continuation/Part 2 of https://gerrit.fd.io/r/#/c/17092/ Change-Id: Id0122d84eaf2c05d29e5be63a594d5e528ee7c9a Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-04-08IPSEC TEST: various hash alogrithmsNeale Ranns1-8/+87
Change-Id: I925aa5bf9472e81f98072d63df499b19e6ddf43d Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-28ipsec: USE_EXTENDED_SEQ_NUM -> USE_ESNDamjan Marion1-1/+1
Change-Id: Ib828ea5106f3ae280e4ce233f2462dee363580b7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-25IPSEC tests fnd fix or Extended Sequence NumbersNeale Ranns1-5/+29
Change-Id: Iad6c4b867961ec8036110a4e15a829ddb93193ed Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-21IPSEC: Mutli-tunnel testsNeale Ranns1-2/+3
Change-Id: I46f1db6579835c6613fdbb2b726246cc62b135fe Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-28TEST: IPSEC NAT-T with UDP headerNeale Ranns1-2/+2
Change-Id: I5ef8b3f4be40a7a0b0f1cb90dc0e15a4711e8664 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-18IPSEC: move SA counters into the stats segmentNeale Ranns1-22/+26
1) stats are accessed via the stat segment which is more condusive to monitoring 2) stats are accurate in the presence of multiple threads. There's no guarantee that an SA is access from only one worker. Change-Id: Id5e217ea253ddfc9480aaedb0d008dea031b1148 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-05IPSEC: SPD counters in the stats sgementNeale Ranns1-9/+13
- return the stats_index of each SPD in the create API call - no ip_any in the API as this creates 2 SPD entries. client must add both v4 and v6 explicitly - only one pool of SPD entries (rhter than one per-SPD) to support this - no packets/bytes in the dump API. Polling the stats segment is much more efficient (if the SA lifetime is based on packet/bytes) - emit the policy index in the packet trace and CLI commands. Change-Id: I7eaf52c9d0495fa24450facf55229941279b8569 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-01-31IPSEC: API modernisationNeale Ranns1-8/+20
- use enums to enumerate the algoritms and protocols that are supported - use address_t types to simplify encode/deocde - use typedefs of entry objects to get consistency between add/del API and dump Change-Id: I7e7c58c06a150e2439633ba9dca58bc1049677ee Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-01-29make test: remove generic importsKlement Sekera1-1/+2
Change-Id: I55b89f0d9fb082c7763b64b09ab14573468c6704 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-01-25IPSEC: tests use opbject registryNeale Ranns1-234/+108
this means we test the dumps - to some extent Change-Id: I8d90745701012012b41a7b3aaf9be97b4dd2bdf8 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-01-24IPSEC Tests: to per-test setup and tearDownNeale Ranns1-102/+239
don't do the setup and teardown in class methods so that with each test the config is added and deleted. that way we test that delete actually removes state. more helpful error codes from VPP for existing IPSEC state. Change-Id: I5de1578f73b935b420d4cdd85aa98d5fdcc682f6 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-12-02IPSEC-AH: anti-replay testingNeale Ranns1-2/+5
Change-Id: Ia5d45db73e4bdb32214ed4f365d5eec8e28115f3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-11-15ipsec: infra for selecting backendsKlement Sekera1-11/+8
Change-Id: Ifa6d8391b1b2413a88b7720fc434e0bc849a149a Signed-off-by: Klement Sekera <ksekera@cisco.com> Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-10-03ipsec: add missing ipv6 ah code & ipv6 testsKlement Sekera1-70/+98
Change-Id: I89e90193ded1beb6cb0950c15737f9467efac1c3 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-06-24Revert "Revert "ipsec: VPP-1316 calculate IP/TCP/UDP inner checksums""Klement Sekera1-189/+98
This reverts commit e0d2bd6bd7fc59c0c6ac48195d7f825dc99bfd91. Change-Id: If491e16f9ea66b2493a6a7c7f3c684ed585f8f51 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-06-22Revert "ipsec: VPP-1316 calculate IP/TCP/UDP inner checksums"Ole Troan1-98/+189
This reverts commit a98346f664aae148d26a8e158008b773d73db96f. Change-Id: Iee5b3a5ddff0e8fd3a30fe5973cee24de434fe12 Signed-off-by: Ole Troan <ot@cisco.com>
2018-06-21ipsec: VPP-1316 calculate IP/TCP/UDP inner checksumsKlement Sekera1-189/+98
Calculate IP/TCP/UDP checksums in software before adding authentication. Change-Id: I3e121cb00aeba667764f39ade8d62170f18f8b6b Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-05-11make test: reorganize ipsec_ah test codeKlement Sekera1-191/+124
Change-Id: Ie0eb0127affd3d771d19bb7c60e79c31858d82cd Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-05-09ipsec: support UDP encap/decap for NAT traversalKlement Sekera1-4/+4
Change-Id: I65c12617ad49e4d5ef242e53988782f0cefa5684 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-04-17make test: ipsec test cleanupKlement Sekera1-7/+5
Change-Id: If813346b665468b25aaf5d95629bcad87212aa3e Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-19Scapy upgrade to 2.4.0.rc5Neale Ranns1-2/+1
- many of the patches fd.io applies in test/patches/2.3.3 are now upstreamed in 2.4 - 2.4 adds support for IGMPv3 which is my main motivation for the upgrade Change-Id: If2c0a524e3cba320b4a5d8cd07817c6ea2bf0c5a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-12-15ESP_AH_test_automation_scripts rev1“mystarrocks”1-0/+325
Change-Id: I941abdc4a02e4c52c66b9d299e380b27caca7c1d Signed-off-by: “mystarrocks” <mystarrocks@yahoo.com>