aboutsummaryrefslogtreecommitdiffstats
path: root/test/test_ipsec_esp.py
AgeCommit message (Collapse)AuthorFilesLines
2019-06-18ipsec: ipsec-tun protectNeale Ranns1-5/+11
please consult the new tunnel proposal at: https://wiki.fd.io/view/VPP/IPSec Type: feature Change-Id: I52857fc92ae068b85f59be08bdbea1bd5932e291 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-18fib: fib api updatesNeale Ranns1-2/+1
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-05-20openssl plugin 3des routine iv_len fixVladimir Ratnikov1-2/+10
Since 3DES has 8 bytes of initialization vector and code contains hardcode for 16 bytes, check added to determine if crypto algorythm is 3DES_CBC and set corresponding iv_len param Change-Id: Iac50c8a8241e321e3b4d576c88f2496852bd905c Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
2019-04-17IPSEC: Pass the algorithm salt (used in GCM) over the APINeale Ranns1-11/+24
Change-Id: Ia8cea13f7b937294e6a080a55fb2ceff30063acf Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-17crypto-ipsecmb: enable GCMNeale Ranns1-1/+0
Change-Id: I670d7899bcc63a419daf481167dc445a6386cce8 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-16IPSEC: support GCM in ESPNeale Ranns1-14/+46
Change-Id: Id2ddb77b4ec3dd543d6e638bc882923f2bac011d Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-11IPSEC: ESP with ESN tests and fixesNeale Ranns1-9/+12
Change-Id: Ie42b26e6d5cdb7b23f370ea2933c65079e8d1089 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-11IPSEC-MB: Use random & non-repeating IV (VPP-1642)Neale Ranns1-1/+1
hard code IV and key lengths based on cipher. Init IV from random data, use AES instruction to rotate. Change-Id: I13a6507d12267b823c528660a903787baeba47a0 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-11Tests: Refactor tearDown show command logging, add lifecycle markers.Paul Vinciguerra1-2/+3
This change adds a consistent interface for adding test-specific show commands to log.txt. It also adds log markers for the execution of setUp[Class], tearDown[Class] in the logs. Change-Id: I7d42e396e594a59e866a7d55dac0af25548e657a Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-04-10crypto: Intel IPSEC-MB engineNeale Ranns1-2/+2
A plugin to use Intel IPSec MB library as a VPP crypto engine This changes uses concepts from: https://gerrit.fd.io/r/#/c/17301/ hence that author's work is acknowledge below Change-Id: I2bf3beeb10f3c9706fa5efbdc9bc023e310f5a92 Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-04-10IPSEC: for each engine and algorithm testsNeale Ranns1-186/+307
refactor the IPSEC tests a bit so we can parameterise the setup. Change-Id: I777e5eb8f29ca1dce3dd273ebd05dae5846790af Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-10Tests Cleanup: Fix missing calls to setUpClass/tearDownClass.Paul Vinciguerra1-0/+17
Continuation/Part 2 of https://gerrit.fd.io/r/#/c/17092/ Change-Id: Id0122d84eaf2c05d29e5be63a594d5e528ee7c9a Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-28Typos. A bunch of typos I've been collecting.Paul Vinciguerra1-2/+2
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-21IPSEC: Mutli-tunnel testsNeale Ranns1-12/+7
Change-Id: I46f1db6579835c6613fdbb2b726246cc62b135fe Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-28TEST: IPSEC NAT-T with UDP headerNeale Ranns1-135/+197
Change-Id: I5ef8b3f4be40a7a0b0f1cb90dc0e15a4711e8664 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-18IPSEC: move SA counters into the stats segmentNeale Ranns1-22/+26
1) stats are accessed via the stat segment which is more condusive to monitoring 2) stats are accurate in the presence of multiple threads. There's no guarantee that an SA is access from only one worker. Change-Id: Id5e217ea253ddfc9480aaedb0d008dea031b1148 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-05IPSEC: SPD counters in the stats sgementNeale Ranns1-9/+13
- return the stats_index of each SPD in the create API call - no ip_any in the API as this creates 2 SPD entries. client must add both v4 and v6 explicitly - only one pool of SPD entries (rhter than one per-SPD) to support this - no packets/bytes in the dump API. Polling the stats segment is much more efficient (if the SA lifetime is based on packet/bytes) - emit the policy index in the packet trace and CLI commands. Change-Id: I7eaf52c9d0495fa24450facf55229941279b8569 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-01-31IPSEC: API modernisationNeale Ranns1-8/+19
- use enums to enumerate the algoritms and protocols that are supported - use address_t types to simplify encode/deocde - use typedefs of entry objects to get consistency between add/del API and dump Change-Id: I7e7c58c06a150e2439633ba9dca58bc1049677ee Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-01-29make test: remove generic importsKlement Sekera1-1/+2
Change-Id: I55b89f0d9fb082c7763b64b09ab14573468c6704 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-01-25IPSEC: tests use opbject registryNeale Ranns1-228/+106
this means we test the dumps - to some extent Change-Id: I8d90745701012012b41a7b3aaf9be97b4dd2bdf8 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-01-24IPSEC Tests: to per-test setup and tearDownNeale Ranns1-99/+240
don't do the setup and teardown in class methods so that with each test the config is added and deleted. that way we test that delete actually removes state. more helpful error codes from VPP for existing IPSEC state. Change-Id: I5de1578f73b935b420d4cdd85aa98d5fdcc682f6 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-12-02IPSEC-AH: anti-replay testingNeale Ranns1-2/+5
Change-Id: Ia5d45db73e4bdb32214ed4f365d5eec8e28115f3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-11-15ipsec: infra for selecting backendsKlement Sekera1-1/+8
Change-Id: Ifa6d8391b1b2413a88b7720fc434e0bc849a149a Signed-off-by: Klement Sekera <ksekera@cisco.com> Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-10-03ipsec: add missing ipv6 ah code & ipv6 testsKlement Sekera1-75/+100
Change-Id: I89e90193ded1beb6cb0950c15737f9467efac1c3 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-06-24Revert "Revert "ipsec: VPP-1316 calculate IP/TCP/UDP inner checksums""Klement Sekera1-291/+113
This reverts commit e0d2bd6bd7fc59c0c6ac48195d7f825dc99bfd91. Change-Id: If491e16f9ea66b2493a6a7c7f3c684ed585f8f51 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-06-22Revert "ipsec: VPP-1316 calculate IP/TCP/UDP inner checksums"Ole Troan1-113/+291
This reverts commit a98346f664aae148d26a8e158008b773d73db96f. Change-Id: Iee5b3a5ddff0e8fd3a30fe5973cee24de434fe12 Signed-off-by: Ole Troan <ot@cisco.com>
2018-06-21ipsec: VPP-1316 calculate IP/TCP/UDP inner checksumsKlement Sekera1-291/+113
Calculate IP/TCP/UDP checksums in software before adding authentication. Change-Id: I3e121cb00aeba667764f39ade8d62170f18f8b6b Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-05-09ipsec: support UDP encap/decap for NAT traversalKlement Sekera1-6/+6
Change-Id: I65c12617ad49e4d5ef242e53988782f0cefa5684 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-04-17make test: ipsec test cleanupKlement Sekera1-6/+4
Change-Id: If813346b665468b25aaf5d95629bcad87212aa3e Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-12-15ESP_AH_test_automation_scripts rev1“mystarrocks”1-0/+341
Change-Id: I941abdc4a02e4c52c66b9d299e380b27caca7c1d Signed-off-by: “mystarrocks” <mystarrocks@yahoo.com>