aboutsummaryrefslogtreecommitdiffstats
path: root/test/test_ipsec_tun_if_esp.py
AgeCommit message (Collapse)AuthorFilesLines
2019-12-02tests: GRE over IPSec unit testsNeale Ranns1-0/+97
Type: test Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I4ae1b56f273026aca86775fb61feabcdeb62c62e
2019-11-08ipsec: remove dedicated IPSec tunnelsNeale Ranns1-56/+90
APIs for dedicated IPSec tunnels will remain in this release and are used to programme the IPIP tunnel protect. APIs will be removed in a future release. see: https://wiki.fd.io/view/VPP/IPSec Type: feature Change-Id: I0f01f597946fdd15dfa5cae3643104d5a9c83089 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-08tests: python3 use byte strings in raw()Ole Troan1-8/+8
Raw('\xaf) and Raw(b'\xaf) are two quite different things in python 2 versus 3. In most cases this didn't make a difference, apart from those cases where length of payload actually mattered. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I3cba5c1486e436a3ca8aa10a7b393da75aa9f6b9
2019-10-18ipsec: make tests support python3Ole Troan1-13/+13
Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I3255702e7c562c8d04a91a095e245756c6443a9e
2019-09-27ipsec: support 4o6 and 6o4 for tunnel protectNeale Ranns1-2/+40
Type: feature Change-Id: Ib2352ca4c7abf4645f21fa16aaaf27408890a2bf Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-08-27ipsec: Fix NULL encryption algorithmNeale Ranns1-0/+8
Type: fix Ticket: VPP-1756 the block-size was set to 0 resulting in incorrect placement of the ESP footer. add tests for NULL encrypt + integ. Change-Id: I8ab3afda8e68f9ff649540cba3f2cac68f12bbba Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-16ipsec: handle UDP keepalivesNeale Ranns1-8/+113
Type: feature Change-Id: I87cc1168466f267e8c4bbec318401982f4bdf03a Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-10tests: Re-enable ipsec tests on ARMjuraj.linkes1-3/+1
Type: fix * test_ipsec_tun_if_esp.TestIpsecGreTebIfEsp * test_ipsec_esp.TestIpsecEspAll add keepalive messages before each algo/engine to prevent test timeout Change-Id: I726f3f9613bab02a65e65542cee494c68176ded7 Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
2019-06-18ipsec: fix ipv6 tunnel protect testsFlorin Coras1-2/+1
Type: fix Change-Id: I1f8007ae659097152046aa1396cc23f126e29018 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-06-18ipsec: ipsec-tun protectNeale Ranns1-30/+629
please consult the new tunnel proposal at: https://wiki.fd.io/view/VPP/IPSec Type: feature Change-Id: I52857fc92ae068b85f59be08bdbea1bd5932e291 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-18fib: fib api updatesNeale Ranns1-21/+23
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-05-29make test: fix packet counter assertKlement Sekera1-5/+13
Change-Id: Ic6e6ac0629bbf07f7dad1803a85aabfdccbc2035 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-04-18IPSEC: tunnel rekey fix and test (VPP-1652)Neale Ranns1-0/+57
Change-Id: I1c2b3e40c689bedcdcea7887792b6b6b6aeb48d5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-17IPSEC: Pass the algorithm salt (used in GCM) over the APINeale Ranns1-9/+9
Change-Id: Ia8cea13f7b937294e6a080a55fb2ceff30063acf Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-16IPSEC: support GCM in ESPNeale Ranns1-0/+127
Change-Id: Id2ddb77b4ec3dd543d6e638bc882923f2bac011d Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-10Tests Cleanup: Fix missing calls to setUpClass/tearDownClass.Paul Vinciguerra1-0/+8
Continuation/Part 2 of https://gerrit.fd.io/r/#/c/17092/ Change-Id: Id0122d84eaf2c05d29e5be63a594d5e528ee7c9a Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-04-02IPSEC-GRE; testsNeale Ranns1-2/+114
failing test disabled on ARM Change-Id: I6b7535cd8f51fdaf9786ba77f9f61a7d8d049bbd Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-29IPSEC: tunnel fragmentationNeale Ranns1-11/+23
Change-Id: I63741a22bc82f5f861e1c0f26a93b5569cc52061 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-28IPSEC: 4o6 and 6o4 for tunnel interfacesNeale Ranns1-0/+26
Change-Id: I4d3ba18ab5205317219989de55b6e50d3b1d8a79 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-28IPSEC: run encrpyt as a feautre on the tunnelNeale Ranns1-2/+2
Change-Id: I6527e3fd8bbbca2d5f728621fc66b3856b39d505 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-28Typos. A bunch of typos I've been collecting.Paul Vinciguerra1-1/+1
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-21IPSEC: Mutli-tunnel testsNeale Ranns1-2/+125
Change-Id: I46f1db6579835c6613fdbb2b726246cc62b135fe Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-21ipsec: add ipv6 support for ipsec tunnel interfaceKingwel Xie1-7/+46
Change-Id: I6a76907dc7bed2a81282b63669bea2219d6903c9 Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com> Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2019-01-25IPSEC: tests use opbject registryNeale Ranns1-2/+5
this means we test the dumps - to some extent Change-Id: I8d90745701012012b41a7b3aaf9be97b4dd2bdf8 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-01-24IPSEC Tests: to per-test setup and tearDownNeale Ranns1-5/+4
don't do the setup and teardown in class methods so that with each test the config is added and deleted. that way we test that delete actually removes state. more helpful error codes from VPP for existing IPSEC state. Change-Id: I5de1578f73b935b420d4cdd85aa98d5fdcc682f6 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-11-15ipsec: infra for selecting backendsKlement Sekera1-1/+2
Change-Id: Ifa6d8391b1b2413a88b7720fc434e0bc849a149a Signed-off-by: Klement Sekera <ksekera@cisco.com> Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-10-03ipsec: add missing ipv6 ah code & ipv6 testsKlement Sekera1-16/+13
Change-Id: I89e90193ded1beb6cb0950c15737f9467efac1c3 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-06-24Revert "Revert "ipsec: VPP-1316 calculate IP/TCP/UDP inner checksums""Klement Sekera1-0/+52
This reverts commit e0d2bd6bd7fc59c0c6ac48195d7f825dc99bfd91. Change-Id: If491e16f9ea66b2493a6a7c7f3c684ed585f8f51 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-06-22Revert "ipsec: VPP-1316 calculate IP/TCP/UDP inner checksums"Ole Troan1-52/+0
This reverts commit a98346f664aae148d26a8e158008b773d73db96f. Change-Id: Iee5b3a5ddff0e8fd3a30fe5973cee24de434fe12 Signed-off-by: Ole Troan <ot@cisco.com>
2018-06-21ipsec: VPP-1316 calculate IP/TCP/UDP inner checksumsKlement Sekera1-0/+52
Calculate IP/TCP/UDP checksums in software before adding authentication. Change-Id: I3e121cb00aeba667764f39ade8d62170f18f8b6b Signed-off-by: Klement Sekera <ksekera@cisco.com>