summaryrefslogtreecommitdiffstats
path: root/test/test_map.py
AgeCommit message (Collapse)AuthorFilesLines
2024-05-08ethernet: check destination mac for L3 in ethernet-input nodeSteven Luong1-1/+1
When the NIC does not support mac filter, we rely on ethernet-input node to do the destination mac check, ie, when the interface is in L3, the mac address for the packet must be the mac address of the interface where the packet arrives. This works fine in ethernet-input node when all packets in the frame might have different interfaces, ie, ETH_INPUT_FRAME_F_SINGLE_SW_IF_ID is not set in the frame. However, when all packets are having the same interface, ETH_INPUT_FRAME_F_SINGLE_SW_IF_ID is set, ethernet-input node goes through the optimized routine eth_input_single_int -> eth_input_process_frame. That is where dmac check has a bug when all packets in the frame are either, ip4, ip6, or mpls without vlan tags. Because without vlan tags, the code handles all packets in fast path and ignores dmac check. With vlan tags, the code goes to slow path where dmac check is handled properly. The fix is to check if we have a bad dmac in the fast path and force the code to go to slow path which will handle dmac check properly. Also do a wholesale correction on all the testcases which do not use the proper dmac when sending L3 packets. Type: fix Change-Id: I73153a805cecdc24c4eefcc781676de04737ae2c Signed-off-by: Steven Luong <sluong@cisco.com>
2024-03-04misc: fix icmpMaxime Peim1-2/+2
- fix ICMPv6 lookup FIB (don't reset sw_if_index[VLIB_TX] to -1) - add locally generated flag in ICMPv4 buffers (reflect ICMPv6) Type: fix Change-Id: If25a176a9952cbe185a030f8b136718af1bff9e8 Signed-off-by: Maxime Peim <mpeim@cisco.com>
2023-11-03tests: refactor asf framework codeDave Wallace1-1/+2
- Make framework.py classes a subset of asfframework.py classes - Remove all packet related code from asfframework.py - Add test class and test case set up debug output to log - Repatriate packet tests from asf to test directory - Remove non-packet related code from framework.py and inherit them from asfframework.py classes - Clean up unused import variables - Re-enable BFD tests on Ubuntu 22.04 and fix intermittent test failures in echo_looped_back testcases (where # control packets verified but not guaranteed to be received during test) - Re-enable Wireguard tests on Ubuntu 22.04 and fix intermittent test failures in handshake ratelimiting testcases and event testcase - Run Wiregard testcase suites solo - Improve debug output in log.txt - Increase VCL/LDP post sleep timeout to allow iperf server to finish cleanly. - Fix pcap history files to be sorted by suite and testcase and ensure order/timestamp is correct based on creation in the testcase. - Decode pcap files for each suite and testcase for all errors or if configured via comandline option / env var - Improve vpp corefile detection to allow complete corefile generation - Disable vm vpp interfaces testcases on debian11 - Clean up failed unittest dir when retrying failed testcases and unify testname directory and failed linknames into framwork functions Type: test Change-Id: I0764f79ea5bb639d278bf635ed2408d4d5220e1e Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2023-09-01map: test fix feature disablingMaxime Peim1-0/+5
Upon test teardown, MAP features were not disabled, potentially leading packets to be treated by the wrong node. Type: test Change-Id: I0c1c614318d1308f825c5cc0bf95688e92f6d00a Signed-off-by: Maxime Peim <mpeim@cisco.com>
2022-05-10tests: replace pycodestyle with blackKlement Sekera1-372/+452
Drop pycodestyle for code style checking in favor of black. Black is much faster, stable PEP8 compliant code style checker offering also automatic formatting. It aims to be very stable and produce smallest diffs. It's used by many small and big projects. Running checkstyle with black takes a few seconds with a terse output. Thus, test-checkstyle-diff is no longer necessary. Expand scope of checkstyle to all python files in the repo, replacing test-checkstyle with checkstyle-python. Also, fixstyle-python is now available for automatic style formatting. Note: python virtualenv has been consolidated in test/Makefile, test/requirements*.txt which will eventually be moved to a central location. This is required to simply the automated generation of docker executor images in the CI. Type: improvement Change-Id: I022a326603485f58585e879ac0f697fceefbc9c8 Signed-off-by: Klement Sekera <klement.sekera@gmail.com> Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2022-03-09ip: IPv4 Fragmentation fix for l2fragmetable sizeNeale Ranns1-1/+2
Type: fix The l2unfragmentable size is not included in the calculation of 'max', the maximum amount of data that can be added to a fragment, therefore the fragments created are too big. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Id1e949ad98203b6f8ea2f55322ef6fa3d507e2a6
2021-05-13tests: move test source to vpp/testDave Wallace1-0/+964
- Generate copyright year and version instead of using hard-coded data Type: refactor Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I6058f5025323b3aa483f5df4a2c4371e27b5914e
2019-08-22tests: move plugin tests to src/plugins/*/testDave Wallace1-437/+0
- Relocate plugin tests for 'make test' into src/plugins/*/test so that plugin test cases are co-located with the plugin source code. Type: refactor Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I503e6a43528e14981799b735fa65674155713f67 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2019-06-18fib: fib api updatesNeale Ranns1-13/+7
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-05-29map: Use vl_api_string macros.Paul Vinciguerra1-4/+44
* Add optional tag to api call in tests * Add test for map_domain_dump() for api code coverage. Type: fix Change-Id: I2f7784aecdca4bf9e94de3319f959786e3d2c607 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-04-10Tests Cleanup: Fix missing calls to setUpClass/tearDownClass.Paul Vinciguerra1-0/+8
Continuation/Part 2 of https://gerrit.fd.io/r/#/c/17092/ Change-Id: Id0122d84eaf2c05d29e5be63a594d5e528ee7c9a Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-28Typos. A bunch of typos I've been collecting.Paul Vinciguerra1-1/+1
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-11VPP-1508: Use scapy.compat to manage packet level library differences.Paul Vinciguerra1-3/+5
Change-Id: Icdf6abc9e53d33b26fd1d531c7dda6be0bb9cb55 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-04test framework: add factory function and default parametersOle Troan1-7/+15
This is the first step to be able to remove all the API message wrappers in vpp_papi_provider.py. This allows to remove all functions that do not override parameters (different from zero), and a separate dictionary for messages requiring different defaults. The general requirement is that all new tests should use named arguments directly. Not positional arguments through the wrapper. Note when removing functions, the calls in vpp_papi_provider wrappers do not necessarily follow message order. Change-Id: If64916c07f8622c138db3a9d7c4a98b93a058e68 Signed-off-by: Ole Troan <ot@cisco.com>
2019-03-01Tests: Remove all wildcard imports.Paul Vinciguerra1-3/+1
They mask dependencies and confuse third party tools. Change-Id: I24ee16bfa0d746a8e8cb99891ba8b20523048b69 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-12-21MAP: Convert from DPO to input feature.Jon Loeliger1-7/+91
Change-Id: I25c86aea23dff19656449b23133db27b1f062ac0 Signed-off-by: Jon Loeliger <jdl@netgate.com> Signed-off-by: Ole Troan <ot@cisco.com>
2018-12-12PAPI: Allow ipaddress object as argument and return values from API callsOle Troan1-8/+8
The API calls that use any of vl_api_address_t, vl_api_ip4_address, vl_api_ip6_address_t, vl_api_prefix_t, vl_api_ip4_prefix_t, vl_api_ip6_prefix_t now accepts either the old style dictionary, a text string (2001:db8::/32) or an ipaddress ojbect. Unless it is called with '_no_type_conversion':True, it will also return an appropriate ipaddress object. Change-Id: I84e4a1577bd57f6b5ae725f316a523988b6a955b Signed-off-by: Ole Troan <ot@cisco.com>
2018-11-22MAP: Use explicit address/prefix types in APIOle Troan1-22/+13
Change-Id: Ic751fecc4a060eedcdb9eaf5d02e1416c838fd63 Signed-off-by: Ole Troan <ot@cisco.com>
2018-09-28MAP: Add check for well known ports.Ole Troan1-2/+147
And more unit-tests. Change-Id: I4667d82d928b7ba8d96b5a5648d464115b3ed216 Signed-off-by: Ole Troan <ot@cisco.com>
2018-09-11GBP Endpoint UpdatesNeale Ranns1-1/+2
- common types on the API - endpoints keyed in various ways for DP lookup - conparison functions for VPP IP address types Change-Id: If7ec0bbc5cea71fd0983fe78987d147ec1bd7ec8 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-01-09test: consolidate the multiple versions of send_and_*Neale Ranns1-7/+0
Change-Id: I7fa7d0ebf73dab8264a2e5ddbd412600d78ead05 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-08L2 over MPLSNeale Ranns1-10/+9
[support for VPWS/VPLS] - switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths - VLIB nodes to handle pop/push of MPLS labels to L2 Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-10Fix MAP-E UT. Add functionality in MAP code to delete the pre-resolved ↵Neale Ranns1-9/+11
next-hops. UT checks for no-leftover-state now pass Change-Id: I9e980ee117c0b6aebc6c7a0fcc153a7c0eaf0c72 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-09make test: temporary disable MAP-E testDamjan Marion1-0/+1
Change-Id: Iee0302a7a4856712f27f97f9cc953b2e9e71698c Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-09MAP pre-resolve - use FIB to track pre-resolved next-hopNeale Ranns1-0/+171
Change-Id: I9ea16881caf7aee57f0daf4ac2e8b82c672f87e9 Signed-off-by: Neale Ranns <nranns@cisco.com>