aboutsummaryrefslogtreecommitdiffstats
path: root/test/test_mpls.py
AgeCommit message (Collapse)AuthorFilesLines
2019-08-07tests: UT for MPLS 6PENeale Ranns1-1/+52
Type: test Change-Id: I48650473591aa181167cf3a86ed2f5da58a81072 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-24fib: Support the POP of a Psuedo Wire Control WordNeale Ranns1-41/+85
Type: feature Change-Id: Ib24547a7c4c73ceb5383d1ca8f14ec40e6a90f01 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-18fib: fib api updatesNeale Ranns1-66/+78
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-05-16tests: refactor. Replace literal constant w/ named constant.Paul Vinciguerra1-5/+5
* change literal packet count vlaues from 65 to a named constant of 67. (This value was recommended to exercise single, dual, and quad loops) Change-Id: Ieb1738dddacb8b6ea7fa25883032ac01a98399e1 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-05-14tests: fix TestMPLSPIC tests in test_mpls.py.Paul Vinciguerra1-28/+82
* Corrected stray ARP/ND packets in captures interfering with test results. * Added tests to match counts of recv'd pkts against sent. * Changes the number of packets to 67 for exercising single, dual, and quad-loops. Change-Id: I9147b8578988607ea4444741d10854e4d8683191 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-04-10Tests Cleanup: Fix missing calls to setUpClass/tearDownClass.Paul Vinciguerra1-0/+32
Continuation/Part 2 of https://gerrit.fd.io/r/#/c/17092/ Change-Id: Id0122d84eaf2c05d29e5be63a594d5e528ee7c9a Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-28Typos. A bunch of typos I've been collecting.Paul Vinciguerra1-11/+11
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-11vpp_papi_provider: Remove more wrapper functions.Ole Troan1-10/+8
Split this work up into pieces. Please don't add new wrappers to vpp_papi_provider.py. Change-Id: I0f8f2afc4cd2bba07ea70ddecea2d7319f7b2e10 Signed-off-by: Ole Troan <ot@cisco.com>
2019-03-11VPP-1508: Use scapy.compat to manage packet level library differences.Paul Vinciguerra1-1/+2
Change-Id: Icdf6abc9e53d33b26fd1d531c7dda6be0bb9cb55 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-12-20FIB: encode the label stack in the FIB path during table dumpNeale Ranns1-1/+7
Change-Id: I28e8a99b980ad343a4209e673201791b91ceab4e Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-27IPIP and IPv6 fragmentationOle Troan1-1/+1
- Error where ICMPv6 error code doesn't reset VLIB_TX = -1 Leading to crash for ICMP generated on tunnelled packets - Missed setting VNET_BUFFER_F_LOCALLY_ORIGINATED, so IP in IPv6 packets never got fragmented. - Add support for fragmentation of buffer chains. - Remove support for inner fragmentation in frag code itself. Change-Id: If9a97301b7e35ca97ffa5c0fada2b9e7e7dbfb27 Signed-off-by: Ole Troan <ot@cisco.com>
2018-09-26MPLS tunnel dump: use sw_if_index not tunnel_indexNeale Ranns1-0/+13
Change-Id: I6c0d5aec6ee96a0d40358f0e09a0901b22265063 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-09-20Route counters in the stats segmentNeale Ranns1-0/+21
route ADD API changed to return the stats segment index to use to read the counters Change-Id: I2ef41e01eaa2f9cfaa49d9c88968897793825925 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-11GBP Endpoint UpdatesNeale Ranns1-1/+2
- common types on the API - endpoints keyed in various ways for DP lookup - conparison functions for VPP IP address types Change-Id: If7ec0bbc5cea71fd0983fe78987d147ec1bd7ec8 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-03-09MPLS Unifom modeNeale Ranns1-368/+473
- support both pipe and uniform modes for all MPLS LSP - all API programming for output-labels requires that the mode (and associated data) is specificed - API changes in MPLS, BIER and IP are involved - new DPO [sub] types for MPLS labels to handle the two modes. Change-Id: I87b76401e996f10dfbdbe4552ff6b19af958783c Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-01-09test: consolidate the multiple versions of send_and_*Neale Ranns1-16/+7
Change-Id: I7fa7d0ebf73dab8264a2e5ddbd412600d78ead05 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-11MPLS disposition actions at the tail of unicast LSPsNeale Ranns1-2/+112
Change-Id: I8c42e26152f2ed1246f91b789887bfc923418bdf Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-31Refactor IP input checks for re-use at MPLS dispositionNeale Ranns1-2/+21
Change-Id: I7aafdecd6f370411138e6ab67b2ff72cda6e0666 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-11FIB table add/delete APINeale Ranns1-6/+42
part 2; - this adds the code to create an IP and MPLS table via the API. - but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass. Change-Id: Id124d884ade6cb7da947225200e3bb193454c555 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-08L2 over MPLSNeale Ranns1-56/+262
[support for VPWS/VPLS] - switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths - VLIB nodes to handle pop/push of MPLS labels to L2 Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-26MPLS lookup DPO does not pop the label (nor does it handle replicate)Neale Ranns1-0/+20
Change-Id: I7de6b96631d1645d0eadd38525860d84d78e316d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-24Missing VLIB node for IPv6 disposition from mcast MPLS LSPNeale Ranns1-4/+73
Change-Id: Ibc0e1910a4926fdfbf74571efb5fd5810bfa09da Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-23Labelled attached paths via an MPLS tunnelNeale Ranns1-2/+25
Change-Id: Ic86617c9c3217122043656ce2ea70bb106df5b2d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-24Improve Load-Balance MAPsNeale Ranns1-0/+359
- only build them for popular path-lists (where popular means more than 64 children) the reason to have a map is to improve convergence speed for recursive prefixes - if there are only a few this technique is not needed - only build them when there is at least one path that has recursive constraints, i.e. a path that can 'fail' in a PIC scenario. - Use the MAPS in the switch path. - PIC test cases for functionality (not convergence performance) Change-Id: I70705444c8469d22b07ae34be82cfb6a01358e10 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-07MPLS McastNeale Ranns1-22/+255
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-17Fix IP feature ordering.Neale Ranns1-0/+83
Drop comes before lookup when enabled. is_first_or_last is not required when setting a feature, the anchor is added in find_config_with_features(). Don't make the PG interfaces automatically L3 enabled, this way we can have tests that check the L3 protocol disbaled behaviour. Change-Id: Icef22a920b27ff9cec6ab2da6b05f05c532cb60f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-03Changing the IP table for an interface is an error if the interface already ↵Neale Ranns1-4/+5
has an address configured (VPP-601) Change-Id: I311fc264f73dd3b2b3ce9d7d1c33cd0515b36c4a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-20Python test IP and MPLS objects conform to infra.Neale Ranns1-75/+66
Add IP[46] MFIB dump. Change-Id: I4a2821f65e67a5416b291e4912c84f64989883b8 Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-12-23make test: improve handling of packet capturesKlement Sekera1-17/+24
Perform accounting of expected packets based on created packet infos. Use this accounting info to automatically expect (and verify) the correct number of packets to be captured. Automatically retry the read of the capture file if scapy raises an exception while doing so to handle rare cases when capture file is read while only partially written during busy wait. Don't fail assert_nothing_captured if only junk packets arrived. Change-Id: I16ec2e9410ef510d313ec16b7e13c57d0b2a63f5 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2016-12-16make test: improve robustness and performanceKlement Sekera1-23/+6
Introduce an API which asserts empty capture for interface. Throw exception in old API if the capture does not exist, thus making it clear if the test expects packets to arrive or not. Improve performance by not doing sleeps after starting the packet generator, rather lazily deleting captures when needed. Fix wrong usage of packet.show() in various tests. Change-Id: I456cb23316eef99b3f35f80344fe595c4db9a21c Signed-off-by: Klement Sekera <ksekera@cisco.com>
2016-12-14Ping response in a VRF context uses correct FIB for responseNeale Ranns1-10/+73
Change-Id: I3b626a1fb9d74ebc609ded14c16c5e3d5a1655ab Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-12-13make test: Use VXLAN built in scapy 2.3.3Matej Klotton1-28/+33
- fix documentation issues. - fix mpls test. Change-Id: Ieef6b4b5e4aca99e89bd03e45a991be89d42adba Signed-off-by: Matej Klotton <mklotton@cisco.com>
2016-12-06add missing import to mpls testGabriel Ganne1-0/+1
Change-Id: If53a7c8066ec9713645a009218e264384afe93e4 Signed-off-by: Gabriel Ganne <gabriel.ganne@qosmos.com>
2016-12-05make test: fix missing log/packet messagesKlement Sekera1-6/+6
Change-Id: Idb3119792943664748c4abc3829ad723f4156dfe Signed-off-by: Klement Sekera <ksekera@cisco.com>
2016-12-02MPLS infrastructure improvmentsNeale Ranns1-20/+502
- deprecate MPLSoEth and MPLSoGRE; replace with generic MPLS tunnel. - deprecates CLI 'mpls encap ..'; replace with addition of MPLS out label to a route/tunnel. - support for MPLS 'routes', e.g. MPLS x-connects. - deprecates CLI 'mpls decap ..'; replace with 'mpls route .. ' Change-Id: Ibda46544912f880d0200f22bf9ff9b52828fcc2f Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-11-01MPLS Exp-null TestsNeale Ranns1-0/+209
Add some 'make test' unit tests for MPLS explicit NULL label handling. Fix the stacking of the MPLS load-balance result form the lookup onto the IPx lookup object. Change-Id: I890d1221b8e3dea99bcc714ed9d0154a5f602c52 Signed-off-by: Neale Ranns <nranns@cisco.com>