aboutsummaryrefslogtreecommitdiffstats
path: root/test/test_mpls.py
AgeCommit message (Collapse)AuthorFilesLines
2017-11-11MPLS disposition actions at the tail of unicast LSPsNeale Ranns1-2/+112
Change-Id: I8c42e26152f2ed1246f91b789887bfc923418bdf Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-31Refactor IP input checks for re-use at MPLS dispositionNeale Ranns1-2/+21
Change-Id: I7aafdecd6f370411138e6ab67b2ff72cda6e0666 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-11FIB table add/delete APINeale Ranns1-6/+42
part 2; - this adds the code to create an IP and MPLS table via the API. - but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass. Change-Id: Id124d884ade6cb7da947225200e3bb193454c555 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-08L2 over MPLSNeale Ranns1-56/+262
[support for VPWS/VPLS] - switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths - VLIB nodes to handle pop/push of MPLS labels to L2 Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-26MPLS lookup DPO does not pop the label (nor does it handle replicate)Neale Ranns1-0/+20
Change-Id: I7de6b96631d1645d0eadd38525860d84d78e316d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-24Missing VLIB node for IPv6 disposition from mcast MPLS LSPNeale Ranns1-4/+73
Change-Id: Ibc0e1910a4926fdfbf74571efb5fd5810bfa09da Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-23Labelled attached paths via an MPLS tunnelNeale Ranns1-2/+25
Change-Id: Ic86617c9c3217122043656ce2ea70bb106df5b2d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-24Improve Load-Balance MAPsNeale Ranns1-0/+359
- only build them for popular path-lists (where popular means more than 64 children) the reason to have a map is to improve convergence speed for recursive prefixes - if there are only a few this technique is not needed - only build them when there is at least one path that has recursive constraints, i.e. a path that can 'fail' in a PIC scenario. - Use the MAPS in the switch path. - PIC test cases for functionality (not convergence performance) Change-Id: I70705444c8469d22b07ae34be82cfb6a01358e10 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-07MPLS McastNeale Ranns1-22/+255
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-17Fix IP feature ordering.Neale Ranns1-0/+83
Drop comes before lookup when enabled. is_first_or_last is not required when setting a feature, the anchor is added in find_config_with_features(). Don't make the PG interfaces automatically L3 enabled, this way we can have tests that check the L3 protocol disbaled behaviour. Change-Id: Icef22a920b27ff9cec6ab2da6b05f05c532cb60f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-03Changing the IP table for an interface is an error if the interface already ↵Neale Ranns1-4/+5
has an address configured (VPP-601) Change-Id: I311fc264f73dd3b2b3ce9d7d1c33cd0515b36c4a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-20Python test IP and MPLS objects conform to infra.Neale Ranns1-75/+66
Add IP[46] MFIB dump. Change-Id: I4a2821f65e67a5416b291e4912c84f64989883b8 Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-12-23make test: improve handling of packet capturesKlement Sekera1-17/+24
Perform accounting of expected packets based on created packet infos. Use this accounting info to automatically expect (and verify) the correct number of packets to be captured. Automatically retry the read of the capture file if scapy raises an exception while doing so to handle rare cases when capture file is read while only partially written during busy wait. Don't fail assert_nothing_captured if only junk packets arrived. Change-Id: I16ec2e9410ef510d313ec16b7e13c57d0b2a63f5 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2016-12-16make test: improve robustness and performanceKlement Sekera1-23/+6
Introduce an API which asserts empty capture for interface. Throw exception in old API if the capture does not exist, thus making it clear if the test expects packets to arrive or not. Improve performance by not doing sleeps after starting the packet generator, rather lazily deleting captures when needed. Fix wrong usage of packet.show() in various tests. Change-Id: I456cb23316eef99b3f35f80344fe595c4db9a21c Signed-off-by: Klement Sekera <ksekera@cisco.com>
2016-12-14Ping response in a VRF context uses correct FIB for responseNeale Ranns1-10/+73
Change-Id: I3b626a1fb9d74ebc609ded14c16c5e3d5a1655ab Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-12-13make test: Use VXLAN built in scapy 2.3.3Matej Klotton1-28/+33
- fix documentation issues. - fix mpls test. Change-Id: Ieef6b4b5e4aca99e89bd03e45a991be89d42adba Signed-off-by: Matej Klotton <mklotton@cisco.com>
2016-12-06add missing import to mpls testGabriel Ganne1-0/+1
Change-Id: If53a7c8066ec9713645a009218e264384afe93e4 Signed-off-by: Gabriel Ganne <gabriel.ganne@qosmos.com>
2016-12-05make test: fix missing log/packet messagesKlement Sekera1-6/+6
Change-Id: Idb3119792943664748c4abc3829ad723f4156dfe Signed-off-by: Klement Sekera <ksekera@cisco.com>
2016-12-02MPLS infrastructure improvmentsNeale Ranns1-20/+502
- deprecate MPLSoEth and MPLSoGRE; replace with generic MPLS tunnel. - deprecates CLI 'mpls encap ..'; replace with addition of MPLS out label to a route/tunnel. - support for MPLS 'routes', e.g. MPLS x-connects. - deprecates CLI 'mpls decap ..'; replace with 'mpls route .. ' Change-Id: Ibda46544912f880d0200f22bf9ff9b52828fcc2f Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-11-01MPLS Exp-null TestsNeale Ranns1-0/+209
Add some 'make test' unit tests for MPLS explicit NULL label handling. Fix the stacking of the MPLS load-balance result form the lookup onto the IPx lookup object. Change-Id: I890d1221b8e3dea99bcc714ed9d0154a5f602c52 Signed-off-by: Neale Ranns <nranns@cisco.com>