summaryrefslogtreecommitdiffstats
path: root/test/test_mpls.py
AgeCommit message (Collapse)AuthorFilesLines
2024-07-12tests: skip more excluded plugin testsDmitry Valter1-0/+4
Check and skip VPP_EXCLUDED_PLUGINS tests for most of plugins. Type: improvement Signed-off-by: Dmitry Valter <d-valter@yandex-team.com> Change-Id: I23fd3666729251c639aa8da72a676058e3f5bb4e
2024-05-08ethernet: check destination mac for L3 in ethernet-input nodeSteven Luong1-1/+1
When the NIC does not support mac filter, we rely on ethernet-input node to do the destination mac check, ie, when the interface is in L3, the mac address for the packet must be the mac address of the interface where the packet arrives. This works fine in ethernet-input node when all packets in the frame might have different interfaces, ie, ETH_INPUT_FRAME_F_SINGLE_SW_IF_ID is not set in the frame. However, when all packets are having the same interface, ETH_INPUT_FRAME_F_SINGLE_SW_IF_ID is set, ethernet-input node goes through the optimized routine eth_input_single_int -> eth_input_process_frame. That is where dmac check has a bug when all packets in the frame are either, ip4, ip6, or mpls without vlan tags. Because without vlan tags, the code handles all packets in fast path and ignores dmac check. With vlan tags, the code goes to slow path where dmac check is handled properly. The fix is to check if we have a bad dmac in the fast path and force the code to go to slow path which will handle dmac check properly. Also do a wholesale correction on all the testcases which do not use the proper dmac when sending L3 packets. Type: fix Change-Id: I73153a805cecdc24c4eefcc781676de04737ae2c Signed-off-by: Steven Luong <sluong@cisco.com>
2024-04-09mpls: fix default mpls lb hash configVladislav Grishenko1-6/+101
In case of multiple path within tunnel, mpls lookup node computes lb hash with mpls_compute_flow_hash config value 0, so only mpls label and l4 ports gets accounted, not 5-tuple. This leads to flow traffic polarization and disbalance over mpls paths. Use mpls hash config from lb instead, usually it'll be MPLS_FLOw_HASH_DEFAULT with 5-tuple plus flowlabel. As optimization, fix flow hash reuse from the previous lookup node if present, like ip_lookup does. Previously mpls lookup always calcs the hash. Test lb distribution for both cases. Also, use the same flow hash hex format in ip4/ip6 and mpls traces for easier reading, most code changes is due fixstyle formatting. Type: fix Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru> Change-Id: Ib89e1ab3edec14269866fe825a3e887d6c817b7c
2023-11-03tests: refactor asf framework codeDave Wallace1-4/+3
- Make framework.py classes a subset of asfframework.py classes - Remove all packet related code from asfframework.py - Add test class and test case set up debug output to log - Repatriate packet tests from asf to test directory - Remove non-packet related code from framework.py and inherit them from asfframework.py classes - Clean up unused import variables - Re-enable BFD tests on Ubuntu 22.04 and fix intermittent test failures in echo_looped_back testcases (where # control packets verified but not guaranteed to be received during test) - Re-enable Wireguard tests on Ubuntu 22.04 and fix intermittent test failures in handshake ratelimiting testcases and event testcase - Run Wiregard testcase suites solo - Improve debug output in log.txt - Increase VCL/LDP post sleep timeout to allow iperf server to finish cleanly. - Fix pcap history files to be sorted by suite and testcase and ensure order/timestamp is correct based on creation in the testcase. - Decode pcap files for each suite and testcase for all errors or if configured via comandline option / env var - Improve vpp corefile detection to allow complete corefile generation - Disable vm vpp interfaces testcases on debian11 - Clean up failed unittest dir when retrying failed testcases and unify testname directory and failed linknames into framwork functions Type: test Change-Id: I0764f79ea5bb639d278bf635ed2408d4d5220e1e Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2022-08-11ip: Use .api declared error countersNeale Ranns1-3/+1
Type: improvement Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I822ead1495edb96ee62e53dc5920aa6c565e3621
2022-05-10tests: replace pycodestyle with blackKlement Sekera1-725/+1112
Drop pycodestyle for code style checking in favor of black. Black is much faster, stable PEP8 compliant code style checker offering also automatic formatting. It aims to be very stable and produce smallest diffs. It's used by many small and big projects. Running checkstyle with black takes a few seconds with a terse output. Thus, test-checkstyle-diff is no longer necessary. Expand scope of checkstyle to all python files in the repo, replacing test-checkstyle with checkstyle-python. Also, fixstyle-python is now available for automatic style formatting. Note: python virtualenv has been consolidated in test/Makefile, test/requirements*.txt which will eventually be moved to a central location. This is required to simply the automated generation of docker executor images in the CI. Type: improvement Change-Id: I022a326603485f58585e879ac0f697fceefbc9c8 Signed-off-by: Klement Sekera <klement.sekera@gmail.com> Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2022-03-24mpls: Set the MTU field in the frag-needed ICMP when doing MPLS fragmentationNeale Ranns1-3/+7
Type: fix The reported MTU should include the MPLS label overhead Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I3df6d2e0b13f49701e187a766a157498dcaafbc0
2022-03-07ip: Fixes for IPv6 and MPLS fragmentationNeale Ranns1-1/+55
Type: fix - IPv6 fragmentation did not work if the packet spaneed multiple buffers, because the 'len' calculation to did max out at the size of a buffer - IPv6 fragmentation did not work when the l2unfragmentable size was non-zero, it was not used in the correct places - IPv6oMPLS fragmentation would fragment all IPv6, it should do so only for link local - IPv6oMPLS should send back TooBig ICMP6 for non locally generated Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ie8f02cdfdd7b7e8474e62b6d0acda8f20c371184
2022-03-04ping: correct the fib-index used for the replyNeale Ranns1-14/+35
Type: fix if original packet was to the link local, then the fib index in the buffer is that of the LL table, we can't use that to foward the response if the new destination is global, so reset to the fib index of the link. In other case, the fib index we need has been written to the buffer already. Add a test for IPv6 ping in an MPLS-VPN where int inout interface is not the the same VRF as the response should be sent. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I18a232d90ddd3ef051a52476c5d861c87060e76f
2022-03-04ip: rate-limit the sending of ICMP error messagesNeale Ranns1-4/+5
Type: improvement For error conditions, such as TTL expired, dest unreach, etc, Rate limit the sending of ICMP error messages. The rate limiting is done based on src,dst IP address of the received packet. the rate limit has been chosen, somewhat arbitrarily, to be 1e-3. This is the same limit as the ARP throttling. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I4a0b791cde8c941a9bf37de6aa5da56779d3cef4
2021-12-21fib: MPLS EOS chains built for attached prefixes should link to a lookup DPONeale Ranns1-0/+27
Type: fix Presently a local label associated with an attached or connected prefix will link to the glean. This is a problem since it will never use the adj-fibs that are installed for that attached prefix. Instead link the local label to a lookup in the table in which the attached link is bound. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Iad49fb6168b9ba47216a9a52bd262363b49c3c43
2021-10-22fib: Don't back walk from a path-list when a child fist attaches.Neale Ranns1-1/+11
Type: fix If the walk is triggered when the child is added, then that child is visited in the walk. However, since it is just attahcing to the path-list it may not, or indeed cannot, have all the context it needs to successfully handle the walk. In the case of MPLS tunnel, it does not have the path extensions ready, and cannot since the path extensions need to resolve on the path-list. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I027af8cf2f522d2f6e37931bea60c767f0cb667d
2021-06-17mpls: CLI to show the MPLS forwarding state of an interfaceNeale Ranns1-0/+7
Type: improvement Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I28b98154bbff36e8391a09a2b30302dda4349946
2021-02-11tests: tag the tests that do not work with multi-worker configurationAndrew Yourtchenko1-0/+2
If the multi-worker default VPP configuration is triggered by setting VPP_WORKER_CONFIG="workers 2", some of the tests fail for various reasons. It's a substantial number, so this change marks all of the testsets that have this issue, such that they can be addressed later independently. Type: test Change-Id: I4f77196499edef3300afe7eabef9cbff91f794d3 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2020-10-21ip: convert u32 entry_flags to vl_api_mfib_entry_flags_t on mroute APINeale Ranns1-8/+18
Type: fix This is not an API change, it's the same values, just a different named type. also use VppEnum values in tests Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I3a18b529514f3cc9467ae4e8ac3e88d067fc776b
2019-12-27tests: test_mpls_v6_ebgp_pic - don't write to stdoutPaul Vinciguerra1-1/+1
Type: test Change-Id: I2cccc68b1b4b6c576580ae0eb5d4511ca2f4663d Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-12-17ip: Protocol Independent IP NeighborsNeale Ranns1-1/+1
Type: feature - ip-neighbour: generic neighbour handling; APIs, DBs, event handling, aging - arp: ARP protocol implementation - ip6-nd; IPv6 neighbor discovery implementation; separate ND, MLD, RA - ip6-link; manage link-local addresses - l2-arp-term; events separated from IP neighbours, since they are not the same. vnet retains just enough education to perform ND/ARP packet construction. arp and ip6-nd to be moved to plugins soon. Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-15tests: Add UT to test incomplete MPLS adjacencies send ARP requestsNeale Ranns1-3/+42
Type: test Change-Id: I81e07233aec54c786e4e9beb8c4f06d0a3dca90f Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-11ip: functional interface to ip fragmentationOle Troan1-2/+37
This provides a functional interface to IP fragmentation. Allowing external features to fragment. Supports arbitrary encap size, for e.g. MPLS or inner fragmentation of tunnels. This also removed dual loop in MAP that was fundamentally broken. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Ia89ecec8ee3cbe2416edbe87630fdb714898c2a8 Signed-off-by: Ole Troan <ot@cisco.com>
2019-11-08tests: python3 use byte strings in raw()Ole Troan1-10/+10
Raw('\xaf) and Raw(b'\xaf) are two quite different things in python 2 versus 3. In most cases this didn't make a difference, apart from those cases where length of payload actually mattered. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I3cba5c1486e436a3ca8aa10a7b393da75aa9f6b9
2019-11-05misc: Fix python scripts shebang lineRenato Botelho do Couto1-1/+1
Type: fix Since CentOS 8, RPM build script doesn't accept '#!/usr/bin/env python' as a valid shebang line. It requires scripts to explicitly chose between python2 or python3. Change all to use python3 as suggested by Paul Vinciguerra. Depends-On: https://gerrit.fd.io/r/23170 Signed-off-by: Renato Botelho do Couto <renato@netgate.com> Change-Id: Ie72af9f60fd0609e07f05b70f8d96e738b2754d1
2019-10-09mpls: support fragmentation of mpls output packetRajesh Goel1-0/+56
Type: fix Signed-off-by: Rajesh Goel <rajegoel@cisco.com> Change-Id: Ie4372c5cf58ab215cdec5ce56f8a994daaba2844
2019-08-07tests: UT for MPLS 6PENeale Ranns1-1/+52
Type: test Change-Id: I48650473591aa181167cf3a86ed2f5da58a81072 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-24fib: Support the POP of a Psuedo Wire Control WordNeale Ranns1-41/+85
Type: feature Change-Id: Ib24547a7c4c73ceb5383d1ca8f14ec40e6a90f01 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-18fib: fib api updatesNeale Ranns1-66/+78
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-05-16tests: refactor. Replace literal constant w/ named constant.Paul Vinciguerra1-5/+5
* change literal packet count vlaues from 65 to a named constant of 67. (This value was recommended to exercise single, dual, and quad loops) Change-Id: Ieb1738dddacb8b6ea7fa25883032ac01a98399e1 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-05-14tests: fix TestMPLSPIC tests in test_mpls.py.Paul Vinciguerra1-28/+82
* Corrected stray ARP/ND packets in captures interfering with test results. * Added tests to match counts of recv'd pkts against sent. * Changes the number of packets to 67 for exercising single, dual, and quad-loops. Change-Id: I9147b8578988607ea4444741d10854e4d8683191 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-04-10Tests Cleanup: Fix missing calls to setUpClass/tearDownClass.Paul Vinciguerra1-0/+32
Continuation/Part 2 of https://gerrit.fd.io/r/#/c/17092/ Change-Id: Id0122d84eaf2c05d29e5be63a594d5e528ee7c9a Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-28Typos. A bunch of typos I've been collecting.Paul Vinciguerra1-11/+11
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-11vpp_papi_provider: Remove more wrapper functions.Ole Troan1-10/+8
Split this work up into pieces. Please don't add new wrappers to vpp_papi_provider.py. Change-Id: I0f8f2afc4cd2bba07ea70ddecea2d7319f7b2e10 Signed-off-by: Ole Troan <ot@cisco.com>
2019-03-11VPP-1508: Use scapy.compat to manage packet level library differences.Paul Vinciguerra1-1/+2
Change-Id: Icdf6abc9e53d33b26fd1d531c7dda6be0bb9cb55 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-12-20FIB: encode the label stack in the FIB path during table dumpNeale Ranns1-1/+7
Change-Id: I28e8a99b980ad343a4209e673201791b91ceab4e Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-27IPIP and IPv6 fragmentationOle Troan1-1/+1
- Error where ICMPv6 error code doesn't reset VLIB_TX = -1 Leading to crash for ICMP generated on tunnelled packets - Missed setting VNET_BUFFER_F_LOCALLY_ORIGINATED, so IP in IPv6 packets never got fragmented. - Add support for fragmentation of buffer chains. - Remove support for inner fragmentation in frag code itself. Change-Id: If9a97301b7e35ca97ffa5c0fada2b9e7e7dbfb27 Signed-off-by: Ole Troan <ot@cisco.com>
2018-09-26MPLS tunnel dump: use sw_if_index not tunnel_indexNeale Ranns1-0/+13
Change-Id: I6c0d5aec6ee96a0d40358f0e09a0901b22265063 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-09-20Route counters in the stats segmentNeale Ranns1-0/+21
route ADD API changed to return the stats segment index to use to read the counters Change-Id: I2ef41e01eaa2f9cfaa49d9c88968897793825925 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-11GBP Endpoint UpdatesNeale Ranns1-1/+2
- common types on the API - endpoints keyed in various ways for DP lookup - conparison functions for VPP IP address types Change-Id: If7ec0bbc5cea71fd0983fe78987d147ec1bd7ec8 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-03-09MPLS Unifom modeNeale Ranns1-368/+473
- support both pipe and uniform modes for all MPLS LSP - all API programming for output-labels requires that the mode (and associated data) is specificed - API changes in MPLS, BIER and IP are involved - new DPO [sub] types for MPLS labels to handle the two modes. Change-Id: I87b76401e996f10dfbdbe4552ff6b19af958783c Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-01-09test: consolidate the multiple versions of send_and_*Neale Ranns1-16/+7
Change-Id: I7fa7d0ebf73dab8264a2e5ddbd412600d78ead05 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-11MPLS disposition actions at the tail of unicast LSPsNeale Ranns1-2/+112
Change-Id: I8c42e26152f2ed1246f91b789887bfc923418bdf Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-31Refactor IP input checks for re-use at MPLS dispositionNeale Ranns1-2/+21
Change-Id: I7aafdecd6f370411138e6ab67b2ff72cda6e0666 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-11FIB table add/delete APINeale Ranns1-6/+42
part 2; - this adds the code to create an IP and MPLS table via the API. - but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass. Change-Id: Id124d884ade6cb7da947225200e3bb193454c555 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-08L2 over MPLSNeale Ranns1-56/+262
[support for VPWS/VPLS] - switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths - VLIB nodes to handle pop/push of MPLS labels to L2 Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-26MPLS lookup DPO does not pop the label (nor does it handle replicate)Neale Ranns1-0/+20
Change-Id: I7de6b96631d1645d0eadd38525860d84d78e316d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-24Missing VLIB node for IPv6 disposition from mcast MPLS LSPNeale Ranns1-4/+73
Change-Id: Ibc0e1910a4926fdfbf74571efb5fd5810bfa09da Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-23Labelled attached paths via an MPLS tunnelNeale Ranns1-2/+25
Change-Id: Ic86617c9c3217122043656ce2ea70bb106df5b2d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-24Improve Load-Balance MAPsNeale Ranns1-0/+359
- only build them for popular path-lists (where popular means more than 64 children) the reason to have a map is to improve convergence speed for recursive prefixes - if there are only a few this technique is not needed - only build them when there is at least one path that has recursive constraints, i.e. a path that can 'fail' in a PIC scenario. - Use the MAPS in the switch path. - PIC test cases for functionality (not convergence performance) Change-Id: I70705444c8469d22b07ae34be82cfb6a01358e10 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-07MPLS McastNeale Ranns1-22/+255
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-17Fix IP feature ordering.Neale Ranns1-0/+83
Drop comes before lookup when enabled. is_first_or_last is not required when setting a feature, the anchor is added in find_config_with_features(). Don't make the PG interfaces automatically L3 enabled, this way we can have tests that check the L3 protocol disbaled behaviour. Change-Id: Icef22a920b27ff9cec6ab2da6b05f05c532cb60f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-03Changing the IP table for an interface is an error if the interface already ↵Neale Ranns1-4/+5
has an address configured (VPP-601) Change-Id: I311fc264f73dd3b2b3ce9d7d1c33cd0515b36c4a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-20Python test IP and MPLS objects conform to infra.Neale Ranns1-75/+66
Add IP[46] MFIB dump. Change-Id: I4a2821f65e67a5416b291e4912c84f64989883b8 Signed-off-by: Neale Ranns <nranns@cisco.com>